I CONFIRM:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Controller of measuring instruments and special tool 4th category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the controller of measuring instruments and special instruments of the 4th category [Name of the organization in the genitive case] (hereinafter referred to as the Company).

1.2. The controller of measuring instruments and special tools of the 4th category is appointed to the position and dismissed from the position as established by the current labor legislation by order of the head of the Company.

1.3. The controller of measuring instruments and special tools of the 4th category belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in dative case] Companies.

1.4. The controller of measuring instruments and special tools of the 4th category is responsible for:

• timely and high-quality execution they have tasks according to their intended purpose;
• compliance with performance and labor discipline;
• compliance with labor safety measures, maintaining order, following rules fire safety at the area of ​​work assigned to him (workplace).

1.5. A person with secondary education is appointed to the position of controller of measuring instruments and special tools of the 4th category. professional education in this specialty and work experience of at least 1 year.

1.6. In practical activities, a controller of measuring instruments and special tools of the 4th category must be guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions from the immediate supervisor;
• this job description.

1.7. A controller of measuring instruments and special tools of the 4th category must know:

• arrangement of pressure and vacuum weighing instruments, electrical and radio measuring instruments, micromanometers, etc., classification of weights, instrumentation and tools, stamps and devices and rules for their use;
• mass measurement errors allowed by instruments and weights;
• methods of weighing using various weighing instruments;
• system of admissions and landings; qualities and roughness parameters;
• rules for acceptance of various measuring and cutting instruments and methods for checking weighing, radio and electrical instruments, pressure and vacuum devices and special tools;
• procedure for preparing certification documents and branding.

1.8. During the period of temporary absence of the controller of measuring instruments and special tools of the 4th category, his duties are assigned to [deputy position title].

2. Job responsibilities

The controller of measuring instruments and special tools of the 4th category performs the following labor functions:

2.1. Inspection, disassembly, adjustment, testing and inspection of weighing instruments of all systems and classes (except for standard, analytical, carriage and technical 1st class), as well as complex measuring and cutting instruments, dies and devices after final assembly and finishing in compliance with dimensions according to 7 - 10 qualifications.

2.2. Identification and elimination of defects.

2.3. Checking measuring instruments and weights.

2.4. Calculation of the error of weighing instruments during testing.

2.5. Checking the correct use of weighing instruments and weights depending on their purpose.

2.6. Certification of weighing instruments.

2.7. Acceptance, disassembly, adjustment, testing and certification after checking the special tool.

In case of official necessity, the controller of measuring instruments and special tools of the 4th category may be involved in performing duties overtime, in the manner prescribed by law.

3. Rights

The controller of measuring instruments and special tools of the 4th category has the right to:

3.1. Get acquainted with the draft decisions of the enterprise management concerning its activities.

3.2. Submit proposals for improvement of work related to the responsibilities provided for by this job description for management's consideration.

3.3. Inform your immediate supervisor about any issues identified during the execution of your duties. job responsibilities shortcomings in production activities enterprise (its structural divisions) and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from heads of departments of the enterprise and specialists information and documents necessary to perform their job duties.

3.5. Involve specialists from all (individual) structural divisions of the Company in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to provide assistance in the performance of their official duties and rights.

4. Responsibility and performance evaluation

4.1. The controller of measuring instruments and special tools of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:

4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.

4.1.2. Failure or improper performance of your labor functions and the tasks assigned to him.

4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work assigned to him.

4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to ensure compliance with labor discipline.

4.2. Evaluation of the performance of the controller of measuring instruments and special tools of the 4th category is carried out:

4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his labor functions.

4.2.2. The certification commission of the enterprise - periodically, but at least once every two years, based on documented results of work for the evaluation period.

4.3. The main criterion for assessing the work of a controller of measuring instruments and special tools of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in these instructions.

5. Working conditions

5.1. The operating mode of the controller of measuring instruments and special tools of the 4th category is determined in accordance with the internal labor regulations established in the Company.

5.2. Due to production needs, the controller of measuring instruments and special tools of the 4th category is required to travel to business trips(including local significance).

I have read the instructions on __________/___________/“____” _______ 20__.

Characteristics of work. Inspection and acceptance of simple devices, dies, cutting and measuring instruments, processed within 12 - 14 qualifications, according to templates, calibers and limit brackets. Registration of acceptance documentation.

Must know: purpose of the tools and devices used; rules and technical specifications inspection and acceptance of control, measuring and cutting tools, dies, devices; rules for drawing up acceptance documentation; system of tolerances and landings; qualities and roughness parameters.

§ 35. Controller of measuring instruments and special tools of the 3rd category

Characteristics of work. Inspection and acceptance of working and measuring instruments, devices, fixtures and dies of varying complexity, processed within 11 - 12 qualifications.

Must know: arrangement of tools and devices of varying complexity; rules for acceptance of special and universal measuring instruments, cutting tools, instruments, dies, conductors and devices of varying complexity; tolerances and landings; types of threads and thread tolerances.

§ 36. Controller of measuring instruments and special tools of the 4th category

Characteristics of work. Inspection, disassembly, adjustment, testing and inspection of weighing instruments of all systems and classes (except standard, analytical, carriage and technical class 1), as well as complex measuring and cutting instruments, dies and devices for post-final assembly and finishing in compliance with dimensions of 7 - 10 qualifications. Identification and elimination of defects. Checking measuring instruments and weights. Calculation of the error of weighing instruments during testing. Checking the correct use of weighing instruments and weights, depending on their purpose. Certification of weighing instruments. Acceptance, disassembly, adjustment, testing and certification after checking a special tool.

Must know: arrangement of pressure and vacuum weighing instruments, electrical and radio measuring instruments, micromanometers, etc., classification of weights, instrumentation and tools, stamps and devices and rules for their use; mass measurement errors allowed by instruments and balances; methods of weighing on various weighing instruments; system of admissions and landings; qualities and roughness parameters; rules for acceptance of various measuring and cutting instruments and methods for checking weighing, radio and electrical instruments, pressure and vacuum devices and special tools; procedure for processing certification documents and branding.

Work examples

1. Indicators, openings, rings, gauges, pressure gauges and other special tools - checking, adjustment and certification.

2. Weighing instruments - checking, certification and marking.

3. Electrical and radio measuring instruments and pressure and vacuum instruments for 1 - 4 qualifications - verification, certification.

§ 37. Controller of measuring instruments and special tools of the 5th category

Characteristics of work. Inspection, disassembly, adjustment, inspection and testing of standard, analytical, carriage and technical scales of 1st class, complex measuring and cutting instruments, instruments, dies and devices after their final assembly and finishing in compliance with dimensions of 6 - 7 qualifications. Certification and branding after inspection. Acceptance, inspection, adjustment and testing of special electrical and radio measuring instruments and pressure and vacuum devices up to class 1.0.

Must know: rules for checking, disassembling and adjusting weighing instruments, the procedure for certifying and branding them; purpose, design of control devices used to check electrical and radio measuring instruments and pressure and vacuum devices, and the procedure for working with them; methods for checking all kinds of instrumentation and instruments.

Work examples

1. Technical, carriage, analytical and standard scales - inspection and marking.

2. Special tools of particular precision and complexity - verification and certification.

3. Pressure and vacuum gauges type MVP-2.5, category II, class 0.05 - testing and certification.

4. Pressure and vacuum devices up to class 1.0 - acceptance, testing and certification.

5. Devices such as IL-13, UP4-1M, UIP-1, ANT - testing and certification.

6. Devices of type M-109, MOR-60, LM-1 - testing and certification.

7. Chronometers - checking, adjustment and certification.

8. Electron-ray oscilloscopes type ENO-1 and device type VK7-4 - testing and certification.

§ 38. Controller of measuring instruments and special tools of the 6th category

Characteristics of work. Testing of complex optical instruments, coordinate machines, assembly and test stands, spatial templates, complex jigs for drilling holes in three to four planes under different angles after their final assembly and finishing in compliance with the 5th quality dimensions. Checking precise and complex patterns with the arrangement of planes in various projections according to grades 1 - 4. Setting up instruments for checking involute, spiral and pitch and performing calculations related to their verification.

Must know: design of complex optical instruments, coordinate machines, assembly and test stands, etc.; methods for measuring spatial templates, design and technology for their manufacture; methods for calculating dimensions given in space; calculation methods necessary to check the involute, spiral and pitch; rules for issuing passports and acceptance certificates.

Secondary vocational education required.

Work examples

1. Special complex instruments - testing and certification.

2. Universal microscopes, comparators, interferometers - verification and certification.

3. Multi-place molds of complex configuration - control of production and adjustment.

4. Optical measuring instruments - testing and certification.

5. Body stamps - production control and adjustment.

This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Preface to the job description

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic check of this document is produced at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Controller of measuring instruments and special tools of the 5th category" belongs to the category "Workers".

1.2. Qualification requirements- incomplete higher education(junior specialist) without requirements for work experience or vocational education, advanced training and work experience in the profession of controller of measuring instruments and special tools of the 4th category - at least 1 year.

1.3. Knows and applies in practice:
- rules for checking, disassembling and regulating weighing instruments, the procedure for certifying and branding them;
- purpose, structure of control devices that are used to check electrical and radio pressure and vacuum measuring instruments and the procedure for working with them;
- methods for testing any complex instrumentation and instruments.

1.4. A controller of measuring instruments and special tools of the 5th category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).

1.5. The controller of measuring instruments and special tools of the 5th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The controller of measuring instruments and special tools of the 5th category supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. During absence, the controller of measuring instruments and special tools of the 5th category is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Characteristics of work, tasks and job responsibilities

2.1. Receives, disassembles, adjusts, checks and tests standard, analytical, laboratory and technical scales of the 1st class, especially complex measuring and cutting tools, fixtures, dies and devices after their final assembly and processing in compliance with the dimensions of the 6th - 7th qualifications (1st - 2nd accuracy classes).

2.2. Certifies and brands them after inspection.

2.3. Receives, checks, regulates and tests special electrical and radio measuring instruments and pressure and vacuum devices of class 1.0.

2.4. Knows, understands and applies current regulations relating to his activities.

2.5. Knows and complies with the requirements of regulations on labor protection and environment, complies with the standards, methods and techniques of safe work performance.

3. Rights

3.1. The controller of measuring instruments and special tools of the 5th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. A controller of measuring instruments and special tools of the 5th category has the right to receive all provided for by law social guarantees.

3.3. The controller of measuring instruments and special tools of the 5th category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. The controller of measuring instruments and special tools of the 5th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The controller of measuring instruments and special tools of the 5th category has the right to get acquainted with draft documents relating to his activities.

3.6. The controller of measuring instruments and special tools of the 5th category has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. A controller of measuring instruments and special tools of the 5th category has the right to improve his professional qualifications.

3.8. The controller of measuring instruments and special tools of the 5th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. A controller of measuring instruments and special tools of the 5th category has the right to familiarize himself with documents defining the rights and responsibilities of the position held, and criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. The controller of measuring instruments and special tools of the 5th category is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. The controller of measuring instruments and special tools of the 5th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety precautions, industrial sanitation and fire protection.

4.3. The controller of measuring instruments and special tools of the 5th category is responsible for the disclosure of information about the organization (enterprise/institution) related to trade secrets.

4.4. The controller of measuring instruments and special tools of the 5th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. The controller of measuring instruments and special tools of the 5th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The controller of measuring instruments and special tools of the 5th category is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The controller of measuring instruments and special tools of the 5th category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Technical, carriage, analytical and standard scales - testing and marking.

5.2. Electron-ray oscilloscopes ENO-1 and device type VK7-4 - testing and certification.

5.3. Special instruments of special precision and complexity - testing and certification.

5.4. Pressure and vacuum gauges type MVP-2.5, category II, class 0.05 - testing and certification.

5.5. Pressure and vacuum devices for class 1.0 - acceptance, testing and certification.

5.6. Devices such as IL-13, UP4-1M, UIP-1, ANT - testing and certification.

5.7. Devices of type M-109, MOR-60, LM-1 - testing and certification.

5.8. Chronometers - testing, adjustment and certification.