Do-it-yourself Christmas tree stand - quick options. Christmas tree stand DIY Christmas tree stand

Do-it-yourself Christmas tree stand made of wood, drawings, assembly procedure and product description.

If we look at the isometric view of the stand in section, we will clearly see the device of the product and all its components:

2. Foundation.

3. Elements of fasteners.

4. Glass jar 0.5 (l).

The drawing of the Christmas tree stand is shown in the figure

Material for production: moisture resistant plywood 20 (mm) thick.

Performs a dual function:

Serves as a base support

Fixes the position of the tree trunk relative to the central hole in the base

BASE

Guides and centers the trunk of the tree relative to the through hole. The diameter of the hole limits the thickness of the tree trunk to 40 (mm).

FASTENING ELEMENTS

Hardware products from the standard GOST series:

Stud M6 x 70 (mm) for smooth holes

Cap nut М6

Reference:

Instead of metal fasteners, you can use wooden dowels 8 x 60 (mm), which are installed in the holes of the parts using glue.

GLASS JAR

Standard product with a capacity of 0.5 (l).

Do-it-yourself Christmas tree stand made of wood - the procedure for assembling structural parts according to the proposed drawings:

1. Cut out moisture resistant plywood details along the contours indicated in the drawings.

2. Align the end surfaces in detail.

3. Mark the center of the holes and drill through holes simultaneously in two mating parts "leg - base".

4. Smooth out sharp edges.

5. We polish the parts and cover with an antiseptic for wood.

6. Apply paintwork decorative coating, which will go well with the bark or needles of the forest beauty.

7. Using fasteners or wooden dowels, we connect all the manufactured parts to each other.

8. Insert the trunk of a Christmas tree or pine into the hole in the base.

9. Fill the glass jar with water.

The lower edge of the trunk should be at a distance of 5 ... 10 (mm) from inner surface the bottom of the bank.

Pour water just below the top of the jar.

As water is used up in glass jar We are constantly replenishing it. To do this, we shift the jar to the side as much as possible, free access to the neck of the jar, add water and put the jar in its original position. Thus, there is a constant supply of water to the cut tree, the life of which continues for a long time, the smell does not disappear, the needles do not crumble.

Here we should get such a stand for a Christmas tree with our own hands made of wood. Such a product looks good, and you should not mask it with cotton wool.

New Year's holidays always come "unexpectedly". People prepare for them in advance, plan a bunch of all kinds of purchases and acquisitions, but quite often they forget about such a “little thing” - how to install. It's one thing if it's artificial and comes with a stand. Another thing is when you bought a live forest beauty and brought it into the house. What's next? Sooner or later the question arises - how to put it? "Daddy, think of something" - there's no getting around it. But in advance to make a good stand that will serve faithfully for many years is not at all difficult.

How to make a tree stand

You can make a stand in a "bench" way. You will need four short boards (25 cm each, 15 mm thick) and two of the same boards 35 cm each. Corners made of metal or "duralumin" are fixed at the ends of short boards, which, in turn, are attached to long boards. In this case, a small indent from their edges follows. The result is two small benches. They should be connected to each other. Small benches will play the role of support for the entire structure.

The center of the long boards is drilled with a diameter slightly larger than the diameter of the tree trunk. The end of the tree trunk can be additionally attached to the bottom board, or secured with a bolt screwed into the trunk along the axis of the tree. Main criterion evaluating your handmade Christmas tree stand - the Christmas tree should occupy a stable vertical position, and under no circumstances should it sway. Everything, now you can put up and decorate the Christmas tree.

Instead of boards sometimes use wooden bars. They must be the same size, otherwise the stand will turn out to be a curve. In both bars, strictly in the center, a material sample is made (rectangular chamfer) the size of the width of the bar. It is necessary to calculate the depth of the chamfer so that after the bars are laid on top of each other “crosswise”, the resulting structure does not sway. If the stand has a roll, then you need to chamfer a little deeper.

You can also make a stand from a metal pipe. Its diameter is taken based on the largest Christmas tree (usually from 5 to 8 cm). The pipe is welded to a metal plate that will serve as the base of the stand. The edges of the plate should be rounded as far as possible so that no one gets hurt. If the welding is done with high quality and ensures the tightness of the piece of pipe, then water can be poured into the stand. At the same time, the Christmas tree will last longer and will delight children throughout the winter holidays. It is recommended to add a sugar solution or a little glycerin to the water.

In extreme cases, you can use some kind of bucket. Sand is poured into an empty bucket with a layer of 10 centimeters, then a Christmas tree is placed in the bucket, leveled, and then the sand is poured to the top edge of the bucket.

The indicated dimensions of the material are selected based on the height of the tree, as well as its "massiveness". It should not be forgotten that the Christmas tree will also be dressed up with garlands. And this is an additional load on the base.

The tree stand is camouflaged in various ways. Someone covers the base of the tree with cotton wool, someone with gauze - only your imagination limits you.

Without exception, adults and children love New Year and prepare ahead of time. In a month or two, gifts begin to be bought, menus are invented. Well, the main event, of course, is the purchase and installation of a Christmas tree. If purchased artificial tree, then problems with its installation should not arise, since a stand comes with it, but what to do if a live New Year's beauty is bought, but it is not possible to put it on. You can solve this problem very easily with your own hands, making a high-quality support that will last for many years.

from wood

It is very easy to make a wooden support to put up a Christmas tree for the New Year. To do this, you need to prepare two boards of 35 centimeters each and four boards of 25 centimeters each, which will have a thickness of about 2 centimeters. Stand for Christmas tree is done in the following way. At the ends of the smaller boards, metal corners are fixed, which in turn are attached to the larger boards. As a result of such actions, two small benches are obtained (see photo), which must be connected with each other with your own hands.

In order to put the tree in the center of the structure, a hole is drilled with a diameter slightly larger than the diameter of the tree trunk. The tree itself can be additionally attached to the boards with bolts that need to be screwed into the trunk. At the same time, the New Year's beauty should stand as stable as possible and under no circumstances should sway from side to side. Only after that it can be dressed up with toys. In some cases, instead of wooden planks to install the Christmas tree, you can use the bars. However, they must be the same size.

metal

A stand made of metal, or rather a metal pipe, is considered more durable. The diameter of the pipes is taken on the basis that the Christmas tree for the New Year will be very large. That is why their diameter should be from 5 to 10 centimeters. The pipes are welded to a metal plate, which will act as a stand. The plate in this case may be in the form of a square or a circle, which is more preferable for safety reasons. A hole is made in the middle of the welded pipes, into which the New Year tree will be inserted, as, for example, in the photo.

If it is not possible to make a Christmas tree stand with your own hands, you can put the tree, for example, in a metal bucket, into which you must first pour sand. First, sand is poured to a height of about 10 centimeters, then a tree is inserted into it, after which the material is poured up to the upper edge of the vessel. You can disguise the resulting support different ways. It can be overlaid with cotton wool, gauze with glitter, garlands, New Year-themed soft toys and much more.

The main attribute of the New Year celebrations is the Christmas tree. Depending on their preferences, people decorate the premises with artificial wood or natural spruce and pine. To install the latter, you must select a stand. You can buy it or build a universal model that will last you more than one year, and which will be able to hold trunks of different diameters. Making a Christmas tree stand with your own hands is not very difficult. To do this, you need a simple and minimal list of tools and materials at hand. You can improve the basic design at will.

materials

To make a stand you will need:

boards 5 x 10 cm;
eye bolts;
washers;
nuts;
nails;
self-tapping screws;
metal bowl;
hammer;
drill;
meter;
open end wrench;
hacksaw or saw;
paper and pen.

Step 1. First, imagine what your project will look like. Draw it on paper to understand what details you will need and what measurements you will need to take.

Step 2. Measure the diameter of the base of the tree and the height of the bowl you need to water. In this project, the diameter of the tree was 7.6 cm, and the height of the tree was 2 meters. The height of the metal bowl was 11.5 cm.

Step 3. Cut out the wood blocks. They will need eight pieces. Four of them will serve as the basis for the support for the Christmas tree. Their length will be 46 cm, and four more are supports, the length of which in this case is 22 cm.

Step 4. Fasten the supports and parts of the base of the stand. You can use screws or nails for this. In this case, preference was given to the latter. Make sure that your stand blanks form a right angle.

Step 5. Assemble the structure as shown in the photo. Tighten all parts with screws. For this work, you will need an assistant, since the supports must be connected to each other evenly. Please note that the dimensions of the gap that you get must come from the diameter of the tree. You can leave a small margin.

Step 6. Use a drill to drill holes for mounting the eyebolts. Insert the bolts themselves into them, securing them with nuts and washers. If the calculations were made correctly, your design, in the end, should look like this. You will need to pour water into the bowl to make the tree stand longer.

Putting up a Christmas tree seems easy, but when you come across it on New Year's Eve, you start to get lost in thought and come up with different ways.

So that you do not tense up before New Year's Eve, we will give you some tips on how to install a live and artificial Christmas tree.

It is worth remembering that before you fix the spruce, you need to buy it. You should buy a Christmas tree a week before the holiday, because the day before new year's eve you won't find a good one.

When choosing a beauty, pay attention to her needles. They should not be broken and yellow.

The shedding Christmas tree also won’t stay with you for a long time, and, which is not very pleasant for a long time. Therefore, if you did not have time to purchase a live one, then it is better to go for an artificial one.

Christmas tree adaptation before installation

If you purchased a tree in early December, you should not install it right away, because it is possible that it will not be worth it until 31.

Put her on a balcony or something cold place without untying.

As soon as you brought the spruce to an apartment, house or other warm room, do not rush to untie it. Let her stand and get used to the temperature.

Before installation, be sure to make a fresh cut and clean the barrel by 5-10 cm.

How to install a live Christmas tree?

different ways some:

with the help of bottles;
into the sand;
on a stand.

How to set up a Christmas tree with bottles

We take plastic bottles up to 2.5 liters and fill with water so that they hold the tree.

Turn the bottles upside down. Insert the spruce into the center of the bucket and tightly fill the bucket with bottles.

In the remaining place in the bucket, add water, not too cold, but not warm.

We close the Christmas tree with a cloth or a special skirt so that the bucket and bottles are not visible. We get a beautiful and stable green beauty.

How to install a Christmas tree in a bucket of sand

Sand and a bucket are ancient and traditional ways to secure a spruce. Our grandfathers and great-great-grandfathers began to use them, because sand can be obtained for free, and everyone can find a bucket.

Choose a bucket for the Christmas tree that is heavier and taller so that it holds the tree well.

You should not put spruce in the sand above 1.5 meters, because the bucket may not stand up and turn over.

For large trees, the following method is suitable.

So, we fill the bucket with sand mixed with gelatin and glycerin to clean it and give a long life to the tree.

Place the spruce in a bucket at a depth of 20 cm. If for this you need to get rid of the lower branches, that's okay.

Bury the trunk and tamp tightly. In order for the spruce to please you with its aroma for a long time, water it hot water with aspirin or lemon juice.

For 1 liter of water, you need to take 1 tablet or a tablespoon of juice.

Of course, you can’t leave a simple bucket of sand undecorated, so use a fabric, blanket or.

How to put a Christmas tree on a stand

You can easily make a stand or a cross with your own hands. We will talk about this.

Basic materials for the stand:

metal;
tree.

DIY wooden Christmas tree stand

We will need:

boards 35 cm long. each 2 pieces;
boards 25 cm long. each 4 pieces;
drill;
bolts;
metal corners.

The thickness of the boards should be the same, about 2 centimeters.

We take boards of 25 cm each and attach metal corners to their ends. We fasten boards of 35 cm each with metal corners.

Got 2 benches. We connect them together.

We take a drill and drill a hole in the center of the stand for, so that it is a little over size spruce trunk.

For greater stability, attach the tree with bolts screwed into the trunk and center of the stand.

So it will definitely not fall on you, children and animals.

You can also replace the boards with bars, just keep in mind that they must be of equal length and width.

To make the stand look beautiful, you can do it on it.

Do-it-yourself metal Christmas tree stand

Such a cross will serve you for more than one year, so making it more profitable.

For a large Christmas tree, you need a metal pipe with a diameter of 6-9 cm.

We take 4 metal plates and weld them to the pipe. We make several holes in the central pipe and insert the bolts.

When the spruce is installed in the hollow central metal pipe, fasten the bolts to the Christmas tree with screws.

Great tree stand!

How to install an artificial Christmas tree

When installing non-living spruce, do not:

place it near walls and radiators;
install an artificial spruce in the center of the living room;
straighten the branches of the tree parallel to the floor and to each other.

Installing an artificial Christmas tree is quite simple. Since you purchase it from the store, it is already sold with a stand. Here you don't have to bother.

The instructions clearly describe how to assemble it correctly.

Straighten the branches randomly, the more illegible you do it, the more magnificent your beauty will be.

If you want an inanimate Christmas tree to give you a real aroma, spray it with coniferous flavor.

Do not hang spruce, because an artificial tree may not withstand.

How to install a Christmas tree so that it stands for a long time?

Everyone wants to enjoy the New Year and the smell of spruce for longer. We will share with you several ways to extend the life of a green tree.

If you think that having cut down a spruce, it dies - this is not at all the case. It is still alive and it is good for you to keep it alive.

Water the tree with water up to 2 liters per day. So that the water does not turn sour and does not deteriorate, make the following solutions that will help the Christmas tree stand for a long time: