Technoelast- group modern materials, intended for arrangement roofing structures and for waterproofing various elements buildings for various purposes. This is one of the most popular and sought-after multifunctional materials for protecting buildings from negative influence climatic and natural phenomena, exposure to moisture and significant temperature changes.

Structure of Technoelast

Currently, Technoelast is produced in a special technological cycle by the method of bilateral application of a special bitumen-polymer coating on a reliable polymer base. The coating consists of styrene-butadiene thermoplastic elastomer, bitumen and filler. For the final protective layer, as a rule, coarse-grained or fine-grained natural toppings, as well as a polymer film, are used.

Technoelast brands

Brand "K"«

With coarse-grained coating on the front side and fine-grained coating or polymer film on the fused side - used for constructing the top layer of the roof.

Brand "P"

With a polymer film or fine-grained dressing or a combination thereof on both sides of the material - used for constructing the bottom layer of the roof and waterproofing tunnels, foundations and others building structures.

In our company you can purchase Technoelast:

• pickup from manufacturing plants (Ryazan, Voskresensk, Rybinsk);
• with delivery to your facility both in Moscow and in the regions;
• Pickup from a warehouse in Moscow.

Technoelast EPP

E - polyester, P - film, P - film

Technoelast EPP– one of the most versatile and popular waterproofing materials.
The basis of Technoelast EPP is one of the most reliable - it is polyester with high strength and elasticity.
Technoelast EPP used on pitched roofs .

Characteristics Technoelasta EPP

• Heat resistance of at least 100 °C (within 2 hours);
• Flexibility on the beam R=25 mm, at a temperature of -25 °C;
• The thickness of the material is 4 mm;
• Protective coating: super-melting film on both sides;
• The mass of the binder component averages 4.5 - 5 kg;
• Base: polyester.

Technoelast EPP able to cope well in difficult situations climatic conditions. At the same time, the service life of Technoelast EPP is more than 25 - 30 years. This can be achieved with high-quality installation.

Technoelast EPP in most cases it can be safely recommended for use. Technoelast EPP It is not recommended to use it together with materials that do not have a polyester base - the properties of polyester will not be fully used.

Features of the composition of Technoelast EPP

The material owes its increased elasticity to the durable and reliable polyester included in its composition, onto which a special binder made of bitumen (in addition, Technoelast EPP includes the thermoplastic SBM and non-toxic fillers to give the material frost resistance down to -30 ° C, heat resistance, and extend the service life of the material up to 30 years). The use of two layers of EPP in the composition of Technoelast protective film, protects the material from sticking, speeds up and facilitates the work of installers when carrying out roofing works. This is due to the fact that when fusing, burning, the film heats up the surface of the roofing more evenly and quickly.

The main scope of application and application of Technoelast EPP

They use high-quality and durable Technoelast EPP as a preparatory layer when installing roll roofing. The presence of polyester in the material allows it to withstand significant loads while maintaining excellent waterproofing properties. Technoelast EPP is also recommended for waterproofing basements, foundations, bridge spans, swimming pools and other hydraulic structures.

Before applying the material, thoroughly prepare the base, clean it of debris and dirt. Cracks, potholes and chips are repaired cement mortar and sand it down. The prepared surface is primed with a bitumen primer to maximize the adhesion of the material to the surface. The insulation is fused using gas burner with overlap (approximately 100 mm). When fusing, it is necessary to avoid overheating of the material.

Technoelast HPP

X - canvas, P - film, P - film

Structure of the material Technoelast HPP:

Basic indicators:

flexibility of the material on the beam (R) - 25 mm (not lower than - 25 0 C);

brittleness temperature of the bitumen layer up to - 35 0 C,

heat resistance + 100 0 C.

Technoelast XPP can be laid at temperatures down to -35 0 C; when using the material below the specified temperature, the brittleness during bending will increase. A roof waterproofed with Technoelast works well in any frost.

If you need to make high-quality roof waterproofing and, in addition, save a lot of money, then Technoelast HPP is what you need. For effective waterproofing roofing it is necessary to use Technoelast HPP (bottom layer of fiberglass) in combination with Technoelast TKP ( upper layer on fiberglass).

Breaking strength of fiberglass

Technoelast XPP with a fiberglass base is weaker in tensile strength compared to technoelast based on fiberglass or polyester. However, this does not in any way affect the main characteristic qualities - they remain at the same level.

Main parameters of Technoelast HPP:

Application of Technoelast HPP

Technoelast XPP is used as a bottom layer roofing waterproofing(used as a lining material) in combination with Technoelast TKP and waterproofing various designs in construction to prevent moisture from penetrating into them, such as:

• roof;
• interfloor office floors;
• foundation (horizontal);
• bathrooms (waterproofing);
• pools and tanks with a protective layer;
• boiler rooms, engineering Communication(waterproofing).

Laying Technoelast HPP

At the first stage, we prepare the base for surfacing. To do this, you must initially seal all large cracks and chips with bitumen mastic, then treat the surface of the base with a bitumen primer. After the primer has dried, we determine the layout map of Technoelast HPP, cut the material and make cutouts in the places where hatches, canopies, funnels, etc. are installed. Having rolled Technoelast XPP back into rolls, we proceed directly to surfacing.

Technoelast EKP

E - polyester, K - crumb, P - film

Used for the top layer of roofing carpet

and has a durable and elastic polyester base.

Characteristics of Technoelast EKP:
-Flexibility on the beam R = 25 mm, not higher than - 25°C,
-Heat resistance + 120°C,
-The brittleness temperature of the bitumen layer is up to - 35°C (this means that Technoelast can be used in work up to a maximum of -35°C; at the highest specified temperature, the material becomes more brittle when bending).

A fully finished roof perfectly performs its waterproofing functions in any frost.
Technoeplast EKP has an increased quality of modified bitumen (it is elastic), technoelast EKP has a remarkable quality of the top protective layer, and its base consists of one of the most durable and elastic materials - polyester. It is used together with lining material - EPP technoelast.
Polyester is not inferior in its properties, and even surpasses such material as fiberglass, which is also used for the base. And unlike fiberglass, polyester does not rot. Externally, it resembles white foam polyethylene.
A distinctive property of polyester is its ability to stretch up to 60%; this elongation effect is absolutely indispensable in those structures that are subject to movement.

Technoelast HKP

X - fiberglass, K - crumbs, P - film

Technoelast brand HKP is a multifunctional SBS-modified, weld-on roofing material of increased reliability, which is designed to insulate the top layer of the roof in all climatic regions with increased safety requirements.
Technoelast is produced by applying a bitumen-polymer binder on both sides to a fiberglass base, including bitumen, SBS thermoplastic and fillers, with further application of protective layers on top and bottom.

Characteristics of HKP technoelast:
— The base material is fiberglass;
- Type of protective layer - on the front side - coarse-grained gray slate bedding, on the underside of the roofing sheet - polymer film;
— Tensile tensile strength — not less than 294 N/50mm;
— Heat resistance not lower than 100 °C;
— The brittleness temperature of the binder is not higher than -35 degrees C;
— Weight 1 sq.m. - 5.0 kg;
— Water absorption during the day — less than 1% by weight;
— Length — 10 m;
— Width — 1 m; thickness 4.2 mm;

Technoelast TKP

T - fabric, K - crumbs, P - film

The material has a rather pleasant-looking front surface gray.

Characteristics of TKP technoelast:
— Heat resistance for 2 hours, not less than 100 degrees Celsius;
— Flexibility on the beam R=25 mm, at a temperature of -25 degrees Celsius;
— The basis is fiberglass;
— Thickness of the top layer – 4.2 mm;
— Topping: gray slate.

Technoelast TKP on a fabric basis is used when installing the top layer of roofing carpet on flat roof. SBS-modified, waterproofing overlay material. Technoelast TKP is used when it is necessary to ensure increased reliability of roof waterproofing. Technoelast TKP is recommended for use on substrates not subject to mechanical and thermal deformation. The material is characterized by high strength but low elasticity.
Technoelast TKP is the most durable top layer in the line of bitumen-surfaced materials. Slate coating is used as protection against ultraviolet exposure to its base.
Fiberglass is used as the basis for the polymer-bitumen binder - the most durable but inelastic material. Technoelast TKP is second only to Technoelast EKP in terms of reliability.

Recommendations for the use of Technoelast TKP
We recommend using Technoelast TKP as one of the most reliable and durable materials for the top waterproofing layer in multilayer structures on a solid roofing base, for example on top of a cement-sand screed.
The material can be used in conjunction with Technoelast TPP or HPP (a more economical option).
At major renovation old roof, it is possible to apply Technoelast TKP directly onto the base, without using a lower waterproofing layer.

Technoelast, like most built-up roofing materials, consists of:

• bases (fiberglass, fiberglass or polyester) - ensures the durability of the roofing;
• SBS-modified bitumen binder, increasing performance characteristics material;
• polymer film with the logo of the manufacturer on the bottom side, protecting the canvas from mechanical damage, gluing of turns to each other, and also serving as an indicator of sufficient heating when fusing the material;
• polymer film on the upper side (in the case of lower layers of material) or gray slate coating, designed to protect the bitumen binder from ultraviolet radiation and mechanical damage during operation.

Technoelast differs from other materials for soft roofs more sophisticated production technology and quality of materials used. Artificial rubber added to bitumen provides elasticity when low temperatures and heat resistance at elevated temperatures. Reinforced base is not subject to rotting and retains its strength characteristics throughout its service life.

The relatively high price of Technoelast waterproofing is compensated by improved technical parameters:

Technoelast is marked with three letters, which mean:

• first - base type: E - polyester, X - fiberglass, T - fiberglass;
• the second is the type of coating of the upper surface: P - polymer film, K - coarse-grained slate coating;
• third - coating material with inside: P - polyethylene film.

Application

Technoelast is intended for waterproofing:

• roofs;
• interfloor ceilings;
• foundations;
• basement walls;
• underground tanks;
• swimming pools;
• main pipelines;
• other building structures and structures.

To construct the lower layers of the roofing pie, Technoelast is used, both sides of which are covered with film; for the upper layers, a material with a film on the bottom and slate chips on top is used.

Technoelast has the following advantages:

• absolute waterproofness;
• high tensile strength - Technoelast based on polyester and fiberglass is stronger than similar ones budget materials by 15%;
• durability - the synthetic base is not subject to rotting, bitumen is not afraid of the effects of chemically active substances, mineral chips reliably protect Technoelast from ultraviolet radiation;
• possibility of operation in any climatic zones - Technoelast can withstand temperatures up to +100 o C;
• simple installation technology, the ability to perform work in winter;
• affordable price - Technoelast is cheaper than most roofing materials.

It is beneficial to use Technoelast. Budget roll materials serve up to five times less than Technoelast, their price per m 2 is only 2 times less.

Technoelast from Ant-Snab company

If you decide to buy Technoelast in Moscow from the Ant-Snab company, the price will pleasantly surprise you. We work without intermediaries, we receive Technoelast directly from TechnoNIKOL factories. Discounts are provided for large quantities purchased. Payment can be made in cash or by bank transfer.

To buy Technoelast from Ant-Snab, you should:

• choose a brand of roofing covering that meets the conditions of use;
• calculate the need for materials using the online calculator available on the website;
• fill out the order form;
• agree on terms of payment and delivery;
• If you have any questions, call our consultants.

Delivery by company transport is carried out within 1-3 days after placing an order within the Moscow region. By prior arrangement, it is possible to unload goods and lift them to the floor. To take out roofing materials independently, you should agree on the shipment date and method of payment. Come. Call. We are waiting for your orders.

Retail price: on request

Technoelast EPP is a roofing lining and waterproofing material.

Purpose of Technoelast EPP

Installation of roofing carpet for structures (lining layer); waterproofing of building structures. Particularly recommended for use in structures subject to movement. Application: industrial roofs, loaded roofs, foundations, underground garages, boilers, subway vaults, swimming pools. Combines with Technoelast EKP. Used at temperatures down to -35 0C.

Structure of Technoelast EPP

In production Technoelast EPP applying bitumen-polymer binder (SBS modified bitumen, fillers) to the polyester base. There is a protective polyethylene film on both sides (to protect the material from sticking during storage and transportation). Durable, strong and elastic material that reliably protects against moisture and is bioresistant. Installation is carried out by fusing using a propane torch.

As a lower quality analogue, you can use Technoelast EKP

Technical characteristics

Weight of material, kg./sq.m. 4.6

Thickness, mm. 4

Material length/width, m. 10x1

• - in the transverse direction 400
• - in the longitudinal direction 600

Moisture absorption within 24 hours, by weight, % 1

Mass of binder on the welded side, kg./m2 2

If you need reliable waterproofing roofs or structures in contact with the ground (foundation, walls of basements, cellars, overpasses), Technoelast EPP TechnoNikol is suitable for you.

The durable film with a bitumen-polymer base, technoelast, has several modifications. Insulation will protect the roof from heavy rainfall; it is used during installation reinforced concrete structures, foundations, overpasses, swimming pools, used for underground installation. Roll waterproofing EPP is resistant to rupture and mechanical damage. Thanks to the special structure insulating material ensures maximum durability.

Specifications

Benefits of waterproofing

Waterproofing technoelast EPP is resistant to microorganisms. Structure and functional purpose remain unchanged when exposed to high temperatures. To carry out construction, repair and roofing work, it is profitable to buy EPP technoelast (bitumen-polymer film) from the Teplosnab company in Moscow. Let's look at the main advantages:

• absolute safety;
• service life up to 30 years;
• excellent flexibility;
• good sound insulation;
• does not interact with components of living nature (fungi, bacteria);
• transfers high temperatures environment;
• moisture resistance.

Designed for waterproofing buildings, structures and building structures.

Structure:

Technoelast EPP is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, styrene-butadiene thermoplastic elastomer and filler onto a glass or polyester base. Fine-grained powder and polymer film are used as a protective layer.

Specifications:

Storage

Rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.

Packaging Details

The packaging of the pallet with rolls is a white shrink bag.

Brands:

Depending on the type of coating and area of ​​application, Technoelast is available in two grades:

Technoelast K— with coarse-grained coating on the front side and a polymer film or fine-grained coating on the surfaced side of the web; used to install the top layer of waterproofing with protection from sunlight;

Technoelast P— with fine-grained powder or polymer film, or a combination thereof on both sides of the canvas; used for the installation of lower layers in multi-layer waterproofing of building structures (foundations, tunnels, roofs, etc.).

Technoelast is biostable.

Table of Material Characteristics:

Manufacturing jobs:

According to the “Guidelines for the design and installation of roofs from bituminous materials roofing company"TechnoNIKOL" can be used in all climatic regions according to SNiP 23-01.

TechnoNIKOL Corporation offers modern building materials, which include roofing roll materials, bitumen, PVC membranes, waterproofing mastics, as well as thermal insulation of walls, ceilings and roofs of the house.