In the world modern technologies It's hard to imagine a person who doesn't have mobile phone. With the entry of gadgets into our lives, accessories have also appeared ...

By Masterweb

30.05.2017 20:57

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a lot of them on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is perfect solution for each.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; gypsum; any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white paper, which will then be decorated; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments, which will be appropriate, is also worth keeping on hand.

Right organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity become the owner of a beautiful and convenient accessory for your mobile.
Sequencing:

First you need to figure out what shape the stand will be. After that, you need to draw templates of the required sizes on the sheet. Elements for the product are cut out from them. Then, carefully, according to the diagram that was previously drawn or printed from some site, we glue the necessary details. wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used. After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True to do wooden stand, some sketches and ideas will not do. In this case, you will also need:

special equipment; skills; the ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

the tree from which the structure will be constructed; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); a simple pencil.

After all the necessary elements are at hand, you can proceed to direct implementation conceived. The sequence of work is as follows:

First you need to find suitable scheme for the product. Then you need to put marks on a wooden base, along which the connector will be cut out in the future. The next step is to cut out the shape with the available tool. Then you need to take control measurements and find out if the mobile phone fits in the cut out connector. The next step is to smoothen the product. This can be done with a file or special device powered by a network. When the surface is smooth, you can decorate the finished form with some color. After painting, you must wait for the product to dry. The work is completed by gluing the accessories selected for this mission. At the end, completely finished structure should be opened with varnish, which will give shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at interesting accessories have at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has unusual view, can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

In our progressive time it is difficult to meet a person who does not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to place it convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 or even more binders. Some craftsmen collect volumetric structures from many different size clips. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this structure, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

IN household we use a variety of cleaning and detergents. Most of them are contained in plastic container. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of ​​the bottle, cut a hole that matches the parameters charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. Optionally, this holder can be painted, pasted over beautiful paper or cloth.

paper clips

The simplest and affordable option coasters are an ordinary metal clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half reverse side. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.

How to make a phone stand children's constructor? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and some bricks various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone upright is the old cassette holder. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such useful thing like a phone stand.

Homemade mahogany smartphone stand.

Hi all! Today we will make for a mobile phone in the form of a dog - a symbol of the year.

Now you need to make a stand for it. To do this, we cut out a circle with a diameter of 70 mm from wood. Sand it down with sandpaper.

We take a few gears that are so small.

We also take epoxy and hardener.

We take plasticine and apply thin layer on one of the sides of the inner cavity of the figurine and on the same side we glue it with polyethylene.

We knead the epoxy glue according to the instructions and pour about 2 mm into the cavity of the figurine. This will be the first layer. We are waiting for the solidification of this layer. Then lay out our pattern of gears and fill in the rest.

Our dog is dry.

We remove plasticine. We take sandpaper and bring everything into a divine form.

We mark with a pencil on the figure the point where the hole will be.

Drill make a small indentation.

Now we make a wooden chop that will fix it all. We insert the chopik into the stand, spread it with PVA glue and also lower part figurines in a thin layer so that the glue does not protrude. We connect. Leave until completely dry. Next, we rub our entire product with herbalist impregnation.

Here's what we got.

Mobile communication devices are in every home, they have become almost indispensable for modern man and perform many functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the most the best options this is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

Most easy way how to make a do-it-yourself phone stand out of wood - it's just to make it from an ordinary plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to handle the functional load. As a basis, such homemade stand for the phone can have any wood and can be given any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will ruin appearance your gadget.

Complex design

If you want your mobile device to be always in sight, not lost in documents, and at the same time your table looks beautiful, solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don't worry, it doesn't require a lot of tools or material either. The most important thing is not to rush and carefully consider the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small boards.

The design of such a stand is as simple as possible, two identical wooden blanks rectangular shape. On the one hand, about a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone who is just starting out, it can be difficult to find correct angle for the cut. But this is not difficult to do, just attach two parts to one another at the planned angle and just make marks on the side of the end. Well, in addition, so that the phone does not slip, you need to make a groove on a horizontal plank, or stick a small bar that will be a stopper.

After all the cuts are ready, it is enough just to sand the stand well so that the bumps do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a stand for a phone of this design, for example, you can make a curly vertical part of the stand, which will greatly improve its appearance. Forms can be a variety of hand, leaf, animals, and in general everything that you think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wood options are not only durable, but also beautiful view. In addition, they look much nobler than other materials, as a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, in order for your handmade mobile phone stand to be beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it can simply be damaged.

You can make a variety of phone accessories at home and for this you do not need to have special tool. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you made is unique, and not like everyone else. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made independently. The second option is much better, not only in terms of economy, but also in terms of the manifestation of individuality.

Even if you do not have experience in making any wood crafts, do not be upset, as there is nothing difficult in this. It is enough to carefully plan everything, calculate what tools and materials will be needed, and only after that proceed to the work itself. If something doesn’t work out for you, then you can try again, rarely does anyone manage to do everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do things right.

Naturally, an ordinary do-it-yourself phone stand is made easily and from improvised materials. It can be a plastic card, a cassette holder, or even a sleeve from toilet paper. But the car holder must be attached somewhere, otherwise the gadget will fly around the cabin. Here are 5 independent inventions that solve the problem of placing smartphones and tablets in a car.

1. Velcro

The cheapest way. Buy double-sided tape at the stationery store or in the department of sewing accessories adhesive tape. Glue one side to the gadget, the other to the dashboard. Before sticking, the dashboard and the back cover of the gadget must be wiped so that there is no dust and dirt left.

Advantages

Budget.

Flaws

Such a holder will only live to see the first hole or a serious shake. And the gadget attached to it, most likely, too.

2. Binder clip (stationery clip)

Again for the holder in the stationery! We buy a clip for papers, it is also a binder clip. We take out the staples, bend them as in the picture, wrap them with a thick thread, put them in place and fix them with an elastic band. Then we attach the resulting device to the duct and you're done.

Advantages

Inexpensive, sturdy, and easy to make.

Flaws

The phone cannot be easily removed from such a clamp. Not the fact that the winding of the thread will really soften the impact on the phone. You cannot change the angle of inclination. You can break the air duct grille.

3. Wire

For those who are willing to sacrifice the integrity of the dashboard. This holder is only for tablets in a book case. Take a strong stainless wire. Drill two holes in the dashboard with the appropriate diameter. Bend the wire and insert into these holes. Hang your tablet by the case.

Advantages

All you need is wire and a drill.

Flaws

Holes will remain on the dashboard. The tablet will not be securely fixed and block access to the radio.

4. Screws or nails

The most brutal way. For the toughest men. Four screws / nails in the dashboard - and the phone will definitely not go anywhere.

Advantages

No one wants to argue with the owner of such a holder on the road.

Flaws

Damaged dashboard and scratched phone.

5. Metal

This method is for craftsmen and metalworkers. Cut out the necessary details for the future holder from a suitable metal. Bend to fit your gadget. Gather the parts together and connect firmly. Sand and paint. Add rubberized inserts and a mount for interior installation. Ready!

Advantages

Flaws

It is impossible to do this without special skills and tools.

There are three types of homemade products: flimsy, spoiling the interior, or requiring real skill. Why waste your time when you can buy a phone holder for a dashboard or glass, for example, an OLMIO car holder for smartphones, which will fit into the interior of the cabin, will not spoil anything and will allow you to conveniently use your phone?