The entertainment industry is constantly expanding. New and new toys appear regularly that develop fine motor skills of the body.
A new hit that displaced the once popular fingerboard was the fidget spinner. At its core, it is one bearing that is surrounded by a certain number of plastic sheets.
These toys are completely different. Everyone will be able to choose their own.

How does this device work? What is it for? And in general, what can you do with it? Let's deal with everything in order.

Description of the spinner

Spinner can be seen in almost every tenth resident big city. The thing is that this is one of the the best means to release the accumulated internal energy. In addition, it is often used to calm down after a hard day at work.

This toy consists of 3 parts:

1. Bearing– the main trap of the spinner. At its core, it is an ordinary metal ring, inside of which there are balls of a smaller diameter. It is thanks to this spare part that this mechanism rotates. The quality of this part significantly affects the rotation speed.
2. Frame- This is the part that rotates around the bearing. It comes in completely different shapes. Its appearance significantly affects the sensations from the promotion of the device;
3. Lid- an element that is screwed into the bearing for ease of use. Without it, it is difficult to rotate the spinner.

This “toy” works according to a simple scheme. It is enough to simply hold it between the thumb and middle fingers, and spin it with the middle finger of the other hand. It can rotate from 1 to 10 minutes.
The most important parameter for fans of this device is the rotation speed.

What can I do to make the spinner spin longer?

The answer is simple: you need to buy a high-quality bearing and replace it. It is best to immediately buy an expensive spinner, which will be created for high-speed spinning.

Types of spinners

There are many different spinners. They differ in the design of the case. Let's look at the most popular of them:

• Single- the most popular option of all presented. It is a small plate with a bearing inside. Common because of its compactness and convenience. They are the easiest to unwind. Good option for newcomers to the spin world.
• Three-spinner- in essence, it is a miniature “shuriken” with a metal weight for rotation inside. Also, its design is reminiscent of a three-leaf clover. The beauty of this mechanism is that bearings are installed on each petal. This is done to maintain balance while spinning and increase speed. Made from the most different materials, ranging from metal to wood and leather.
• Quad spinner– this is already a “four-leaf clover” with a bearing. From a design point of view, they are the brightest and most colorful. For some reason, decorators try to make them “the most elegant”.
• Exclusive– these include all spinners that have an unusual and custom design. They are not always convenient, but they are most interesting for hardcore people (real fans of these things).
• Wheel- consists of a bearing and a wheel that rotates around it. An interesting device, but when used there is no “wow” effect. That is why only the most sophisticated people use it.

How to choose a spinner?

First of all, when choosing a spinner, you should start from personal preferences. The most important element Something worth considering is the design. You must like him personally. Choose the one that fits best in your hand.
You can spin the spinner right when purchasing it to evaluate the second and third significant factors - speed and vibration. As stated earlier, many people want the spinner to be faster than lightning. However, not everyone likes this. The fact is, the higher the speed, the stronger the recoil, that is, the vibration. Many people like the pleasant feeling in their hands. If this is the case, then take a metal spinner, you won’t go wrong.

If vibration and high speed are not your thing, then buy a spinner with a plastic body.

Spinner tricks

Simple helicopter

This trick is basic. In fact, once you master it, you won’t have any problems with others. It involves getting the toys and throwing them from one hand to the other. Important point: during the “flight” it should not “stall”.
This technique is done in a simple way:

1. Spin the spinner in one hand for about 5-10 seconds.
2. Toss it to your other hand and grab it. The rotation should not stop when grabbed.

Main FocusThis cool trick is that you need to intercept the spinner strictly in the middle with your thumb and forefinger.
It turns out that you need to grab the bearing cleanly. This is not as simple as it might seem at first glance. However, practice will put everything in its place.

Runway

This trick is a more complicated variation of the first one. Below is how to make a runway:

1. We launch the spinner from one hand to the other.
2. We catch it with the back of our hand. You need to get exactly into its center so that the rotation does not stop.
3. After this, we raise our palm up and catch the toy in the air with our thumb and middle fingers. Ideally, the rotation should not stop.

The main catch This technique is that it is not easy not to stop the spinner in the palm of your hand. The main thing in this matter is accuracy and dexterity. As they say, “patience and work will wear out everything.”

Throw from under your feet

This trick is no longer easy. It will take a long time to get used to it. It is done like this:

1. Launch the spinner in one of your hands with your index finger. Lower your hand gradually down, trying not to upset the balance of rotation.
2. Throw the toy up, while raising your leg. She must fly under it.
3. With your other hand you need to grab the bearing so that it does not stop rotating.
4. You can do this method with both legs until the engine stalls.

This trick is difficult to master for several reasons. First– problems with lowering the arm and maintaining balance. This will take a long time and hard to learn. Second– grabbing the middle of the spinner is incredibly difficult, since your leg will be your obstacle.

Well, are you ready to repeat the trick?

Choose any in our store and train!

Spinner tricks for kids

According to a study conducted in 2015 by American scientists, a spinner is an excellent toy for children suffering from attention deficit disorder. It allows you to improve concentration and develop fine motor skills of your fingers.
It is not surprising that many people buy these toys for their children. Naturally, they also want to do all sorts of cool tricks with it.

Advice: start with the “helicopter” technique. As said earlier, this is the basis of all further tricks. Also, no one forbids performing the previously described elements.

Taking off into the air

Every young boy will love this interesting technique. To learn how to do it, you will have to practice, but the effort will be worth the effort.

1. Spin the spinner in one hand with your middle finger.
2. Launch it into the air and catch it with your second hand.
3. Now we throw the toy up with a sharp movement. You need to catch it with the same hand by the bearing so that the rotation does not stop.
4. You can toss infinite number times until you get bored.

The catch with this trick is that you need to learn to grab the mechanism by the middle so that it does not stop. It is also desirable that the rotation speed of your spinner be high so that you can throw it up at least a couple of times.

Dorsal flight

One of the most effective techniques is throwing behind the back. It is not easy to implement. After all, the spinner throw will have to be done blindly.
Advice: throw the toy as far as possible so that it can enter your field of vision after a slight turn of your head. As soon as you see it, grab the piston with a sharp movement. If the “helicopter” is mastered to perfection, this will not be difficult.

Yula

This is a fairly simple trick. It is enough to simply launch the spinner not on your hand, but on a flat surface (on a table or floor). After this, you can watch the bewitching dance of an unusual toy for all ages.
These techniques can keep you and your children busy for hours. So feel free to choose the perfect spinner and go ahead and conquer the world of “spin”.

Do you want to buy a spinner, but it is not on sale in your city? We will tell you how to make a spinner with your own hands without a bearing! Recently, an unusually large number of newfangled toys have begun to appear. They are great for both children and adults, but sometimes it is very difficult to find a store that can sell you such a newfangled accessory. We'll talk about spinners.

This toy became a trend relatively recently and simply flooded the Internet. It is impossible to purchase it in some cities, since there is no retail stores, so you have to order online.

But why spend money if you can do it yourself?! Many people wonder how to make a spinner without using a bearing, today we will help you with this.

What is a spinner

The word "spin" is translated from English as "rotation". By and large, the toy is a rotating body that moves around its axis when energy is imparted to it. You can get a spinner without bearings, but it will not have the required rotation speed.

A standard spinner consists of three petals, with a bearing located in the center of each. It is worth noting that the mass of each petal must be the same, as well as the shape, otherwise there will be no balance and the rotation will stop very quickly.

What's the joke?

IN free time, in anticipation of something, when we think, we always take something in our hands in order to somehow entertain or calm ourselves. For this you need... a spinner. Of course, you can’t call it a children’s toy, since it is an accessory for psychological and emotional relief.

How to make a spinner with your own hands

First, we will look at the main master classes, and later in the article we have prepared for you simple instructions making a spinner without a bearing!

Making such a toy is quite simple, you just need to thoroughly study the design and details of the spinner:

• a housing that includes a bearing and a plug;
• petals, which also have bearings built into them;
• additional plugs.

The most main part toys are bearings; the efficiency of rotation, the number of revolutions and much more depend on them. The plugs are needed to hide the working mechanism of the bearing and to conveniently hold the spinner itself. The parts are very simple and can be easily made using available materials.

Manufacturing process

First, let's look at the model with bearings. For this we need:

• cardboard
• 4 bearings
• knife or scissors

1. First we make a drawing future model your spinner.
2. We draw the sketch on cardboard and carefully cut out along the edges.
3. It is necessary to clearly identify and mark the places for the bearings; to do this, use a compass.
4. Each petal should be symmetrical to the other.
5. We cut out the holes for the moving elements with scissors and smooth them a little with sandpaper.
6. They need to be made in such a way that the bearing fits tightly into the hole.

Next, insert the bearings into the holes and generously fill the edges with glue. In this case, it is best to use construction adhesive, which is used for gluing various decorated parts.

It must be applied carefully so that nothing gets into the bearing.

There is one well-known method, which will be discussed further.

Wooden spinner

Making a wooden spinner is more difficult option, but he is also the most reliable. Using a jigsaw and special construction tools you can make a housing into which, by analogy, you insert bearings and secure them with glue. In each case, you can paint your spinner in a suitable color.

1. First we select the wood. It is best to use plywood as it is the easiest to process. The sketch of the body can be found on the Internet, after which we transfer it to the workpiece. Using a jigsaw we cut out the body.
2. Next you need to sand everything down.
3. Drilling holes for bearings
4. The thickness of the plywood must match the thickness of the bearing, otherwise nothing will work.

Spinner without bearings

Many people wonder how to make a spinner with their own hands without a bearing and with minimal costs. The most common option will be presented below. The easiest and fastest way to make a spinner is from caps from plastic bottles. This is a very simple method that no one knows about (except you).

For this we need:

• three bottle caps of the same size and weight;
• drill bit;
• ballpen;
• glue.

Everything needs to be done in a certain sequence:

1. Glue the three lids together on the sides. It turns out to be something like a spinner without bearings.
2. Next, we make a hole in the central cover for the rod. ballpoint pen. In this case, the diameter of the drill and the rod must be the same.
3. We cut off a few centimeters from the rod and insert it into the resulting hole.

So the easy way You can make a spinner with your own hands, which can be rotated as much as you like without a bearing.

Making such a toy is very simple if you know or at least imagine how a spinner works. In any case, you can always replace the covers with any other parts of the same shape and size. It's very simple.

Harm from using this accessory

Having figured out how to make a spinner with your own hands without a bearing, you can talk about negative consequences its use. You must strictly follow safety precautions so as not to cause any harm to yourself.

A spinner made at a factory is completely safe, but the one you make yourself is not always so. It is necessary to carefully treat the surfaces, securely fasten the bearings and use it only for its intended purpose.

Do not give to children unattended!

Has your child succumbed to the popular fashion for spinning spinners? Is he asking for a red one, a yellow one, and also a luminous one in the form of a minion? In general, so that it’s not like everyone else? Then you can make a toy with your own hands. Moreover, such a labor lesson will keep both you and your baby busy. And if you still don’t know what a spinner is, there we answered all the popular questions about this modern, arch-modern fun.

We have put together three ways for you to make a spinner, two easy and one more difficult (you'll need your dad's help here). But we are sure that both tools and materials should be found at home or in the country. Each instruction is supported by a video tutorial found on YouTube for clarity. So, how to make a spinner out of paper, plastic lids and wood?

Method 1. Spinner made of paper and cardboard.

Simple, cheap and not at all ugly - a paper spinner for beginner spinner makers. An older child can handle it on his own, a little one may need a little help, and the result can be proudly taken to kindergarten or school - where creativity is always held in high esteem.

What you will need:

• Cardboard, marker and caps (or a ready-made template from the Internet)
• Scissors
• Nail scissors or awl
• 3 coins
• Pen refill
• Paints or glitter for decoration

Instructions:

1. Download a ready-made spinner template from the Internet. Or draw it yourself by tracing plastic bottle caps on cardboard. You need to cut two pieces of cardboard in the shape of a spinner.
2. Cut out four more smaller circles. You can circle a coin of a lower denomination.
3. Glue three coins of the appropriate size on the sides of one of the cardboard blanks.
4. Glue the other half on top of the blank with coins.
5. Using nail scissors or an awl, make a hole in the center of the spinner.
6. Cut about 1 centimeter off the shaft from the handle.
7. Punch holes in the center of two small circles.
8. You can paint the finished spinner blank in any colors or decorate it with sparkles, rhinestones or stickers with your child’s favorite characters. Everything is your choice and completely unique!
9. Insert a piece of dowel into one of the small circles and glue it around the edges of the hole.
10. Insert the circle with the rod into the center of the spinner and glue the second circle on the other side.
11. Glue the two remaining small circles on top of the ends of the rod. Ready! A spinner made of cardboard, without a bearing and with a complete flight of imagination in terms of design is sure to keep a child occupied for some time.

Source: PLASTILIN

Method 2. Spinner made of plastic caps.

This spinner will require a little more materials and diligence, but it will also last much longer. In general, a spinner made from Coca-Cola caps is something like crafts made from matchboxes for older generations. Dear consumables and soul-warming results with minimal costs for an actively functioning (that is, rotating) thing.

What you will need:

• Plastic bottle caps
• Kinetic sand or plasticine
• Glue gun
• Nail and lighter
• Glue stick
• Scissors
• Toothpick

Instructions:

1. Place kinetic sand or plasticine into three bottle caps almost to the top. The main thing is to make the blades heavier.
2. Use a glue gun to fill the remaining space in the lids to the top.
3. Make a hole in the fourth (without sand) lid (you can use a heated nail).
4. Glue three lids with sand to the central lid with a hole.
5. Cut two pieces about 1 centimeter from the glue stick.
6. Break a toothpick in half. Place a piece of rod on one end (the toothpick should not stick out) and thread it into the center of the spinner.
7. Place the second piece of the rod over the tip of the toothpick on the other side. Ready! If you are very eager, such a spinner can also be decorated creatively - painted with paints (for example, acrylic) or pasted over with something positive. Or you can leave it as is, choosing interesting combinations of caps from bottled drinks.

Source: Feature of the Day

Method 3. Wooden spinner (with bearing)

Let's move on to the most labor-intensive method of making a spinner. You can’t do without parents here, but the result can be safely laid out on the desk along with purchased toys. Again, in terms of design, freedom for self-expression is provided. For those dads and children who are friends with a jigsaw, know how to find bearings on the shelves of hardware stores and know which side to hold the drill on.

What you will need:

• 2mm bearing
• Plywood sheet (5 mm)
• Stack of coins
• Scissors
• Pencil
• Hand jigsaw
• Sandpaper
• Template (or cardboard and marker to create it)
• Clamp
• Drill

Instructions:

1. Glue the template onto a sheet of plywood and mark the locations for future holes in each of the circles.
2. Drill holes in each of the three circles on the sides to make it easier to cut them out later.
3. Insert a jigsaw into the holes and cut them out.
4. Cut out the workpiece itself from a sheet of plywood and sand it with sandpaper.
5. You can paint the spinner any color you like.
6. Insert the bearing into the central circle; if it does not fit well, you can drive it in with a hammer.
7. Glue together a stack of coins for the inner circles. Start with a five-ruble coin (put it under the circle), then two-ruble coins, and on top again a coin with a face value of five rubles.
8. Do this for all circles. You can decorate it on top as you wish. Ready! Just think about the benefits of a homemade anti-stress toy: you had a good time together with your child, worked hard and saved on buying another plastic trinket. And it spins great!

The spinner is a fashion toy invented in the USA. It appeared in Russia in 2016 and has already gained extraordinary popularity. What is this? She is called a spinner, a spinner, a fidget.

It develops fine motor skills of the fingers, relieves anxiety and has an anti-stress effect. Fidget spinner is not only a toy designed to entertain children and adults. This is a great way to spend time waiting, traveling in public transport, and queuing. This turntable also allows you to get rid of bad habits, such as tapping your fingers on the table surface, repeating hand movements, and even the habit of smoking. It will allow you to get rid of the bad habit of twisting something in your hands. The working principle of the fidget spinner is the use of a bearing in the middle of the product with petals.

The fitget has two, three, four, five, and some models even six petals. The most common are toys.
The spinner is made of wood, brass, bronze, plastic, and can be combined.

Two types of bearings are used: metal, like, or with ceramic balls. Characterized by rotation time. The spinner rotates from one minute to several tens of minutes. The longer the rotation occurs, the better the quality of the toy.
The cost of the product is affected by use quality materials in the manufacture of a body with petals. The easiest way to buy a spinner is in.

Making wood in a home workshop

However, a person familiar with tools can make such a toy for himself. For this you will need:

1. A small piece of wood, preferably hardwood;
2. Bearing (suitable for a broken skateboard);
3. Sleeves or suitable pieces of round metal;
4. Epoxy glue.

Video with instructions for making a spinner from wood

First of all, we mark a piece of wood. A square piece is required.
We drill a hole in the center and expand it to fit the external dimensions of the bearing. The thickness of the workpiece must be equal to the thickness of the bearing. The next step is to insert the bearing and glue it with glue.
On two opposite sides we drill two holes equal to the smaller diameter of the sleeves. Then we take the polished sleeves, glue them in pairs and mount them with glue in the prepared holes of the board. Let the glue dry.
We clean, sand and paint in the color you like. A simple spinner with two petals is made at home. In the same way, you can make a homemade gadget from plexiglass or PCB.
It is more difficult to make a product with three petals. To do this you will need a drawing, a jigsaw and a protractor. The diagram below clearly illustrates how to make such a toy.

Paper spinner

• It is much easier to make a hand-held spinner from paper.
• We print the drawing on a regular printer.
• Transfer the drawing to thick paper or cardboard.
• We cut out 15-20 samples according to the template. Using scissors, we make a hole for the bearing, slightly smaller than the outer diameter.
• Glue the cut out samples with PVA glue.
• Place under the press.
• After the glue has dried, insert the bearing.
• We clean it with scissors and, if necessary, sandpaper.
• Paint it in the desired color. The toy is ready.

Video with instructions for making a paper spinner without a bearing at home

As you can see, the cost of the product consists mainly of own work, because Parts from out-of-circulation mechanisms were used for production.
Before assembling the gadget, inspect the bearing. To do this, remove the anthers and wash them. This completes the work on making the turntable.

Luminous

1. The most interesting toys are obtained if you make them yourself from absolutely incredible materials. Make a glowing fitjet - all you need to do is buy a phosphor online in China.
2. Dilute 3 grams of powder in 7 ml of glycerin to obtain a luminous liquid.
3. Then you can use the described method for making the central part from wood. Only use instead of sleeves glass flasks from the fluorescent lamp starter.
4. We pump liquid into the flasks using a syringe and glue them into the prepared holes.

It turns out to be a beautiful toy that you can play with and surprise your friends in the dark.

Made from chocolate

Any material you can imagine is suitable for making a spinner. It can be made from wax, paraffin candles, ice and even make it edible.
A very original gadget is made from chocolate.

I played and got tired of it and ate it.

To make such a toy you will need:

• Make a mold for filling;
• Bearing;
• Candies such as confetti or jelly beans;
• Cardboard, for form and glue;
• Wax paper;
• Scissors with pencil;
• A piece of foil from a chocolate bar and the chocolate itself;
• Glue.

Video showing how to make an edible chocolate spinner

1. A drawing is taken from which the twist template is cut out. A strip slightly larger than the thickness of the bearing is cut out of paper and glued along the perimeter of the template.
2. Then we completely wrap the prepared bearing in foil and place it in the center of our mold, having previously placed wax paper on the bottom of the mold. We place candies along the edges of the petals (you can do without candies, this is for beauty). All that remains is to dissolve the chocolate in a water bath.
3. Once the chocolate becomes liquid, use it to pastry syringe poured into the mold. It is necessary to pour very carefully so as not to move the installed parts.
4. After filling everything with chocolate, place the toy in the refrigerator. After some time, the chocolate will harden and can be removed from the refrigerator.
5. All that remains is to remove the product from the mold, free the bearing from the foil, clean the edges - and you can use it. When you get tired of it, you just have to eat it.
6. The entire manufacturing process can be filmed and shown to friends or posted on the Internet on your page.
7. In a similar way, a fitget can be made at home from any hardening material: stearin, wax, gelatin, and from colored wax candles you will get a multi-colored spinner body.

They differ in the number and shape of the petals. The shape can be completely different: from geometric shapes to exotic and futuristic shapes. They differ in the use of bearings: one, three, four or no bearing at all. When choosing a spinner, follow these rules:

• The gadget should rotate smoothly and without noticeable beats.
• The quality of workmanship should not cause any complaints.
• The material from which the toy is made must be of high quality.
• The rotation is quite long: the longer the better.

Some users advise choosing products based on their preferences. If you like the item in terms of design, color, or manufacturing, buy it, but the rotation time is secondary.
So we see that no one can give an unambiguous recommendation. Focus on your own feelings. To ensure that the pinwheel serves for a long time and is always attractive, follow the recommendations:
Protect the toy from mechanical damage, falling from a height onto a hard surface;
If the product is made of plastic, it is not recommended to disassemble it, especially the button - it can be damaged plastic parts, they are glued or pressed very tightly;
Periodically wash and lubricate the middle bearing using a syringe with a needle. Wash with gasoline, preferably for lighters, it has almost no odor. It is recommended to lubricate with watch oil in a small amount. Mineral oils should not be used for lubrication.

Spinner, spinner...Everyone seemed to go crazy. What is it? Where did it come from? And most importantly, why? Today we’ll try to figure it out... It was invented by one person. Now the whole world is going crazy, people are buying it, kids are loving it.

When I was little, I really liked to spin the top. You take out some larger gear from an old watch and start turning it - who has it longer? Sound familiar? You sit and watch... Remember your feelings as a child.

I get approximately the same sensations when spinning a spinner. You spin and look. And a spinner is essentially a top. Only the top stands on an axis. And the spinner is spun in horizontal plane. The Anglo-Saxons like to use the word “spin” (to rotate, to turn).

They have “spin” everywhere - from quantum mechanics and physics - to this simple thing. It's terribly simple. And we have a top, and many other analogies...

Anyone who rewinds a cassette with a pencil does not buy a spinner!

Time does not stand still. Our children no longer know about all sorts of tape cassettes and spinning tops. This newfangled thing has appeared. And there is every reason to think that the spinner will soon turn into an element of style. Maybe soon we will see spinners not only with LEDs, but also gold, with rhinestones, maybe even with laces...

Now this is interesting time, you can expect anything. If there is a demand for platinum spinners, I wouldn't be surprised. Online stores are already selling products for 3,000 rubles...

Spinner - what is it, what is it for and why is it needed?

Structurally, the spinner is very simple. Imagine a star with a bearing in the center. The star's petals are balanced. You can also insert a bearing in each beam. And twist it for yourself. Let's add brightness using bright colors and now, the spinner is ready.

Of course, it is needed for entertainment and during idleness. If you are in the “trend”, then of course, in order to remain fashionable and stylish. It was originally intended as an anti-stress sedative. Which is true. You can spin it in different ways - on the table, in your fingers, on one finger... While it is spinning, you watch how it does it, and your head at that moment becomes completely empty... And this is relaxation, friends. Let it be for a minute, but rest.

All your attention turns to the spinning petals. Maybe for this reason, in our age of stress, this simple children's toy has become so popular all over the planet... Who knows? Children love spinners very much for their brightness and for this very thing... Now many sellers present this attractive product as a kind of “remedy”. Here's what the sellers write:

• develops motor skills and increases finger sensitivity. Products are especially useful for restoring hand function after various injuries and fractures of the hand;
• the device has an anti-stress effect: helps to concentrate, eliminates anxiety, relieves a nervous emotional state and irritability;
• the toy will be a great way to occupy time when traveling on public transport or while waiting in a long line;
• stimulates the development of manual precision.

So, if you want to relax and get an expensive exclusive product, then go ahead to online store. I'm sure they'll be looking forward to seeing us there. But Russia is such a unique country. Our people sometimes cannot come to terms with going out and buying this simple thing. Our man does it himself.

Because when you made a Thing yourself (even the simplest one), you have a completely different attitude towards it. For example, it’s always a pity to throw away such a thing... By the way, when you make something yourself, it also sometimes relaxes and distracts. We will make a spinner with our own hands to take our minds off and experiment :)

How to make a spinner with your own hands from scrap materials?

The materials, friends, can be very different. But the principle is the same - there is a bearing in the center. In order to ensure long and easy rotation, the toy must be balanced, and the bearing must not contain thick, greasy grease. Here is one of the manufacturing options:

You need to buy four bearings (three will be used as counterweights)

You will need a wood drill with a diameter the same as the bearings:

Also, we need the material from which the body is made. He can be anything. The main requirements are strength and easy processing.

We mark the material with a pencil something like this:

We continue to rotate the drill (the same spinner):

Let's do it with a regular drill additional holes (for intricate designs):

The workpiece should be drilled something like this:

And before placing bearings in it, look something like this (if you can work beautifully, you should try to somehow round the corners):

It is necessary to prepare the central bearing and remove the factory grease from it.

After removing the protective covers from the holder, rinse it in gasoline or acetone:

Then you need to use a suitable glue (superglue does not glue all plastic!), epoxy or other, carefully glue the bearings into place.

Something like this:

This is such a brutal, “masculine”, harsh spinner.

Watch the manufacturing video from start to finish:

As you can see, everyone experiments as best they can :):). There is no limit to perfection! There would be a desire. Both samples spin well. More effort will go into good design. Hooray!

How to fix a spinner if it is broken or rusty?

According to my feelings, it is impossible to break the purchased spinner. The bearing is pressed into a metal housing; counterweights are glued or pressed. The weakest link is the bearing. It may rust if kids drop it and rinse it in water.

It is clear that if the spinner is homemade, as in the example, we simply lubricate and unravel the bearing until all the rust comes off. We re-glue the flying bearings with normal glue. In severe cases, we use a rust converter and lubricate it until the previous “driving” qualities return. In the case of a purchased spinner, carefully remove the lid or cap that is always present there:

We apply liquid household lock lubricant to the clip, and so on. If there is a lot of rust, you can throw it in a jar of oil and let it sit... That's the whole repair.

Origami paper spinner - without bearings and glue, how to make?

In the wake of the general fascination with the toy, experiments continue. Someone again combined two different directions and spinners began to be made from paper. By the way, it is precisely such crafts that develop motor skills and everything else in children.

Therefore, you can get your child interested in making such original things. Made from paper, it will be safe for the child. True, a little disposable. Colored paper:

Action one:

Act two:

Act three:

Action four, axis:

Act five, the “bearing” is also made of paper, which confirms that the Japanese are creative people :)

To figure out what's what, watch the video.

Beautiful. And it's fun to do things like that.

How to make a spinner from plastic bottle caps with your own hands

Our people are talented and savvy. All to the farm! We don't throw anything away! We choose something brighter and newer!

It's simple, the principle is the same, the material is different.

Let's do it once:

Let's do two. You need to drill and clean the hole at the bottom of the lid, and glue:

We glue only three plugs, we use the rest for alignment and symmetry of the first three. It should look something like this:

You need to bring everything into divine shape and then begin assembling the product. We also rinse the bearings in acetone and then reassemble them.

When everything is inserted and glued, we check:

It works.. :) But, friends, this is the easiest way. There are quite exotic ones interesting ways manufacturing spinners from plastic stoppers. Watch the video.

As they say, there would be a desire. It remains to be said that in any creative process there is no limit to perfection. Make a spinner from wood, metal, cardboard, concrete...

As long as ball bearings are produced, we can create anything. Any creative work gives pleasure to those who do it. Do it with pleasure, and then everything will work out well for you. See you on the blog pages. If anyone has links to interesting options homemade spinner, please leave it in the comments.