Combined machines D 300 (K) / D 400 are designed for complex processing of parts made of various breeds wood at medium and low power. The main operations performed by combined machines D 400 / D 300 (K):
Longitudinal, transverse and angled cutting circular saw;
Planing along the plane and edge, as well as in given size with mechanical feed of the workpiece;
Milling surfaces of various configurations and cutting tenons;
Drilling and milling tenons.
Machines D 300 (K) / D 400 provide safe conditions work: all cutting tools have guards and are located under the machine table in the non-working position. Cast bed and cast tables reduce vibration and maintain accuracy for a long time. The spindle drive is individual, from 3 electric motors.
To expand the technological capabilities, combined machines D 300 (K) / D 400 can be equipped upon request: a turning attachment, a grinding and sharpening attachment with a device for sharpening planing knives, milling device, copying device and side table-roller table.
Combined machines D 400 / D 300 (K) (Russia),
technical specifications: Width of jointing and thicknessing, mm Maximum thickness of thicknessing, mm Dimensions of working surfaces of planing tables, mm Thicknesser feed speed, m/min Knife shaft rotation speed, rpm Cutting height of circular saw, mm Carriage stroke, mm Circular saw diameter and seat, mm Processing height of the milling device, mm Table length, mm Maximum vertical movement of the spindle, mm Total power, kW Number of electric motors, pcs. Dimensions, mm 2000x 2360x 1485 Weight of machines D 400 / D 300 (K), kg
The following operations are performed on the machine:
- Longitudinal, transverse and angled sawing with a circular saw;
- Planing (jointing) along the plane and edge;
- Thicknessing with automatic feed of the workpiece;
- Milling of surfaces of various configurations (copier upon request) and cutting of tenons;
- Drilling and milling of grooves;
- Rigid bed and cast iron tables reduce vibration and provide high accuracy processing for a long time.
- Individual spindle drive from 3 electric motors.
- High quality milling is provided by a vertical high-speed spindle and a clamping system (optional).
- A miter carriage is used for cutting tenons and sawing across the grain and at an angle.
- The saw and milling shafts have the ability vertical movement and when one is working, the other is retracted to its lowest position and the hole is plugged.
- Thicknessing with automatic feed through two drive shafts, while the planing tables are folded back, providing convenient access to the thicknessing table.
- The drilling and grooving table provides movements: in horizontal plane in any direction using a lever system and vertically using a screw with a handwheel and handle.
- For safe operation, the machine is equipped with protective devices and guards: the protective casings have pipes for connecting chip ejectors.
- The machine is equipped with an eccentric clamp and guide rulers.
TECHNICAL CHARACTERISTICS OF MACHINES D300, D400:
|
Naib. width of jointing and thicknessing, mm |
||
|
Naib. Thickness when thicknessing, mm |
||
|
Length of jointing tables, mm |
||
|
Feed speed during thicknessing, m/min. |
||
|
Naib. depth (drilling) and length (groove), mm |
||
|
Rotation speed of the knife shaft (drill), rpm. |
||
|
Naib. sawing thickness, mm |
||
|
Circular saw diameter, mm |
||
|
Saw shaft rotation speed, rpm. |
||
|
Diameter milling spindle, mm |
||
|
Naib. diameter of the installed cutter, mm |
||
|
Milling spindle rotation speed, rpm. |
||
|
Number of electric motors, pcs. |
||
|
Total power, kW |
||
|
Dimensions, mm |
1950x1520x1450 |
2050x2080x1450 |
|
Weight, kg |
ADDITIONAL OPTIONS:
 |
Advantages of installing an automatic feeder:
|
 |
Designed to expand the technological capabilities of combined machines mod. D300, D400, and can also be used on any milling machine with a vertical spindle, equipped with a tenoning carriage of any design. Dimensions of the table for the template: 250x600 mm. |
  |
Used to increase the productivity of the milling unit. To ensure safety and increase productivity, the material being processed is pressed by spring-loaded rollers from above and from the sides. |
Manufacturer of woodworking combined machine D-400 is a company Tehsnab, OOO, Ivanovo. Website address: http://tehsnabstanki.ru
The Tekhsnab company has been developing and producing woodworking machines since 1992.
- D-250
- D300
- D-400
- D300/260
- D300FR
- D300 F1300
- D300 F2000- the machine is divided into 2 independent machines. Eight functions
- D300 F2600- the machine is divided into 2 independent machines. Eight functions
- D-400FR- the equipment does not include the following devices: - milling, circular sawing, tenoning, drilling and grooving
D-400 combined woodworking machine. Purpose, scope
Woodworking combination machine designed for complex processing of joinery and simple furniture sawing, planing (planing), milling with manual supply of workpieces in medium-sized enterprises.
With appropriate settings, the following types of processing can be performed on the machine:
- planing (jointing) on a plane up to 410 mm in width and up to 4.3 mm in depth in one pass;
- planing along the ribs (edge) at an angle from 0 to 45°;
- one-sided thicknessing of boards, beams with mechanical feed up to 320 mm in width and up to 4.3 mm in depth;
- drilling, making longitudinal and transverse grooves using end mills on a drilling and slotting device.
- sawing along and across the fibers of boards up to 80 mm thick at a workpiece feed speed of up to 1.5 m/min;
- sawing along the fibers at an angle from 0 to 45° using a ruler;
- sawing slabs, boards across the grain (trimming) straight and at an angle using a miter carriage;
- milling with shaped cutters up to Ø180 mm;
- cutting tenons with shaped cutters using a carriage;
- curved milling with shaped cutters according to a template (copier upon request).
Planing spindle (knife shaft):
Saw spindle:
Milling vertical spindle:
Design features of the multifunctional machine D-400
- Rigid bed and cast iron tables reduce vibration and ensure high machining accuracy for a long time
- Individual drive of sawing, planing and milling spindles from 3 electric motors
- High quality milling is ensured by a vertical high-speed spindle and a clamping system (optional)
- A miter carriage is used for cutting tenons and sawing across the grain and at an angle.
- The saw and milling shafts have the ability to move vertically and when one is working, the other is retracted to the lowest position and the hole is plugged
- Thicknessing with automatic feed through two drive shafts, while the planing tables are tilted, providing convenient access to the thicknessing table
- The drilling and grooving table provides movement: in a horizontal plane in any direction using a system of levers and vertically - with a screw with a handwheel and handle
- For safe operation, the machine is equipped with protective devices and guards: the protective casings have pipes for connecting chip ejectors
- The machine is complete eccentric clamps, guides.
- The machine has the ability to sharpen cutting tools (drills, cutters, etc.), as well as flat knives with straight cutting edge for jointers and cylindrical prefabricated cutters.
Operating conditions: in open areas, under a canopy, in enclosed spaces, except residential premises.
The machines must be operated under the following conditions:
- Altitude above sea level – up to 1000 m;
- Normal operating value of atmospheric pressure: 865...1065 GPa (650-800 mm Hg)
- Normal air temperature values during machine operation: +10°С... +25°С
- Recommended air temperature +17°С... +23°С
- Recommended relative air humidity no more than 75% at 20 ºС
- Air humidity is allowed up to 85% at +25 "C and more low temperatures, but without moisture condensation.
- Version according to the degree of protection from moisture - unprotected
Delivery set for the D-400 machine
Complete machine
Box D300.052
Completeness:
- Tenoning carriage (assembled)
- Drill clamp (assembled)
- Corner
- Planing knives (installed on the machine)
- Circular saw 315x32 z=48 (supplied at additional cost)
- Saw casing with sectors
- Support kit (supplied at additional cost)
- Insert for circular saw
- Circular saw stop
- Milling device housing
- Milling device housing clamp
- Ring and sheet milling device
- Milling device stopper (installed on the machine)
- Planer guide (assembled)
- Planer protection (assembled)
- Drilling device (assembled)
- Drilling device mounting screws
- Instructions for use
Additional accessories for the D-400 machine
- D300K1- Quick-release copying attachment for curved milling;
- D300FSh- Milling clamping device. Used to increase the productivity of the milling unit;
- automatic feeder- Automatic feeding device;
- DS2200- Aspiration system (chip suction).
Woodworking machines from Tekhsnab Company
- D300- basic machine. Width of jointing (thickening): 310mm. Machine weight: 650 kg.
- D-400- basic machine. Maximum jointing width (thickening): 410mm. Machine weight: 780 kg.
- D300/260- a machine without a vertical milling spindle. Joining width (thickening): 300mm
- D250- the machine is divided into 2 independent machines: jointer and thickness planer
- D300FR- the equipment does not include the following devices: - milling, circular sawing, tenoning, drilling and grooving
- D-400FR- the equipment does not include the following devices: - milling, circular sawing, tenoning, drilling and grooving
- D300 F1300- the machine is divided into 2 independent machines. Eight functions
- D300 F2000- the machine is divided into 2 independent machines. Eight functions
- D300 F2600- the machine is divided into 2 independent machines. Eight functions
D-400 General view of the combined machine
- Bed D300.101.051
- Reismus D300.200.001
- Circular saw device D300.401.001
- Milling device D300.402.001
- Tenoning device D300.403.001
- Drilling device D300.405.001
Design of the combined machine D-400
Bed (D-400.101.051) fig. 1.1. pos. 1.
The bed is a welded structure, which is the basis for installing circular saws, thickness planers, planers, milling and drilling devices. The frame is mounted on a flat, rigid plane and does not require a special foundation. The alignment of the bed is carried out according to the level in the longitudinal and transverse directions by adjusting the supports. The design of the frame provides for the possibility of installing the machine on vibration supports.
Assembly group "Reismus" (D300.200.001) fig. 1.1. pos. 3
The Reismus assembly group includes:
- thickness planer (D300.201.001)
- planing device (D300.202.001)
Thicknessing device (D300.201.001)
The thicknesser device consists of a knife shaft and a feed mechanism, which are mounted on two cast-iron jaws mounted on the frame; the lifting table is mounted directly on the frame. A device is also installed on the cheeks to prevent the workpiece from being thrown out towards the worker.
The knife shaft is the cutting organ of the device and is a steel cylinder with three planing knives fixed in its grooves. The knives are secured by means of clamping bolts and wedges that press the knives to the supporting planes of the shaft. The lower edge of the knives is supported by springs, which facilitates their alignment and adjustment. The knife shaft rotates in two ball bearings. Torque is transmitted to the knife shaft from an electric motor installed in the grooves of the side wall of the frame through a V-belt drive.
The belt is tensioned by vertical movement of the electric motor in the grooves.
The lifting table is mounted in the housing and installed directly on the frame. Lifting is carried out using a steering wheel.
The workpiece feeding mechanism consists of two shafts (feeding corrugated and receiving smooth), which are driven into rotation using a reduction gear-chain transmission. Power is taken off for mechanical feed from the knife shaft using a friction clutch (spring-loaded rubber-coated wheel) mounted on one of the gear-chain shafts. The chain is tensioned by a spring-loaded sprocket.
The anti-blowout device (stops) is mounted on one of the links of the cast iron cheeks. To install the lifting table at a height of right size processing is served by a ruler with a pointer.
When working on the planer, the workpiece feed mechanism must be turned off using a lockable lever.
Adjustment and adjustment of the surface planer
The knives must be installed so that they protrude 1.5 mm beyond the dimensions of the knife shaft. When installing, control the uniform alignment of the knives along the entire length of the shaft.
Start tightening the bolts holding the knives from the middle of the wedge. Before starting work, be sure to check that the knives are securely fastened. After turning on the jointing device, make sure that it is operating normally and in the correct direction of rotation. It is necessary to monitor the operation of the knife shaft bearings. If the temperature rises, it is necessary to dismantle the bearings, wash and replace the lubricant.
Regularly monitor the tension of the workpiece feed mechanism chain and the condition of the rubber coating of the clutch drive wheel.
Note: when working on a thicknesser, the planer tables can be rotated on the brackets if there is a protective cover for the knife shaft.
Planing device (D300.202.001) fig. 1.1. pos. 7
The planing device consists of a knife shaft, feed (front) and receiving (rear) planing tables, a guide ruler and knife shaft protection. The tables are mounted on the upper edges of the cheeks of the surface planer. The tables are height adjustable, which ensures the removal of chips of varying thicknesses from the material being processed. The rear table is set flush with the top point of the trajectory of the knife shaft knives using a ruler and is not subject to adjustment during operation.
The front table can be adjusted depending on the required thickness of chip removal. Lifting of tables is carried out by moving axes along the thread, rigidly connected to the tables.
The guide ruler is used to guide the material being processed and to plan edges at a certain angle (maximum angle 45°). The ruler is fixed with a clamp. The knife shaft guard is adjustable to the width of the material being processed. The electric drive is the same for thicknesser and planing devices.
Adjustment and adjustment of the planing device
Monitor the condition of table surfaces. Scourges and potholes must be eliminated. Ensure the reliability of the fastening elements of the guide ruler. The remaining requirements for adjusting and setting up the planing device are similar to clause 6.2.3. “Adjustment and adjustment of the thickness planer.”
Circular saw device (D300.401.001) fig. 1.1. pos. 2.
The circular saw device is used for longitudinal, transverse and cutting of material at an angle.
The device consists of a work table, a guide ruler, a rotating spindle with a circular saw.
The spindle body has the ability to move along the guides of the cast bracket, on which the table is rigidly fixed, and the bracket itself is attached to the bed.
A circular saw is installed on the spindle at one end, which is secured between the flanges with a nut; at the other end of the spindle there is a pulley, to which torque from the electric motor is transmitted using a V-belt.
The electric motor is mounted on a pendulum support, which is mounted on the side wall of the frame. The belt is tensioned by moving the pendulum support.
The cutting height is adjusted using a lever by moving the spindle body along the bracket guides and locking it in the desired position.
The guide ruler installed on the table has the ability to move to adjust the width of the cut. To measure the width of the cut, a ruler is installed at the end of the table.
For cross-cutting and miter sawing, a tenoning carriage is used, moving along guides parallel to the plane of the saw. A stop angle for positioning the workpiece is installed on the carriage. To cut at an angle, the angle is rotated and fixed in the desired position.
The direction of rotation of the saw is towards the operator.
The circular saw is covered with a welded steel fence with a device that prevents the workpiece from being thrown out towards the worker.
A riving knife is installed at the back of the circular saw.
At the bottom of the casing there is a pipe for connecting a suction device for removing chips.
Adjustment and adjustment of the circular saw device
Place the circular saw on the shaft and securely tighten the nut through the flange. Check on idling direction of rotation of the saw. Direction of rotation towards the operator. Check that the riving knife is securely fastened and that protective fence and its fastening. The gap between the knife along its entire length and the saw should not exceed 10 mm.
Milling device fig. 1.1. pos. 4 (tenon-cutting Fig. 1.1. item 5)
The milling (tenon-cutting) device consists of a housing flanged to bottom surface circular saw table. A quill moves inside the housing, in the bearings of which a milling spindle is installed. At the end of the spindle, cutters of various thicknesses and profiles are installed. For installation of cutters there is a set of spacer bushings. The tool is secured to the spindle using a nut. The spindle is extended into the working position and height adjusted manual drive, consisting of a gear pair and a screw. In the working position, the spindle is fixed with a stopper.
The drive electric motor is installed on the sub-motor plate. The belt is tensioned by moving the plate on two rolling pins, which are fixed after adjustment.
Changing the spindle rotation speed is done by throwing the belt on double-strand pulleys.
The spindle with installed cutters is covered with a casing.
At the rear of the casing there is a pipe for connecting a suction device for removing chips. The milling depth is adjusted by moving the casing in the guide grooves (the milling device shown in Fig. 1.1 is not included in the machine set and is supplied at an additional cost).
A carriage with a table is used for cutting tenons. A stop angle with a clamp is installed on the table, allowing you to base and clamp the workpiece.
The angle has the ability to unfold, which allows you to cut tenons at different angles.
When working on a circular saw, the spindle of the milling (tenoning) device is set to its lowest position, and the hole in the table is closed with a special plug.
When working on a milling (tenoning) device, the circular saw of the circular saw must be installed in the lowest position and securely fixed, and its protective cover must be removed.
Adjustment and adjustment of the milling (tenon-cutting) device
Lower the circular saw blade to its lowest position and securely lock it.
Remove the plug on the table and extend the spindle into the working position. Install the cutter (set of cutters) onto the spindle using bushings and securely tighten it with a nut.
Install the fence with a guide bar (when milling) or without it (when cutting tenons) and adjust to the required size. Securely secure the fence. Set the cutter (set of cutters) to the required height by moving the spindle, and fix the quill.
Check the direction of rotation of the cutter at idle speed.
Direction of rotation towards the operator.
Drilling device fig. 1.1. pos. 6
The drilling device is used for drilling holes and milling grooves and recesses.
The drilling device consists of a table mounted on a bracket rigidly fixed to the cheek of the surface planer.
The table has the ability to move: vertically “up and down”, horizontally along the axis and perpendicular to the axis of the cutting tool. The table is moved: in height using a screw with a flywheel and handle, in the horizontal plane using a lever.
The table has a base support for the workpiece and a device for securing the workpiece.
Adjustment and adjustment of the drilling device
Install the drill chuck (not included in the delivery set) on the conical end of the knife shaft, surface planer, and secure with a screw.
Check the direction of rotation of the cartridge at idle.
Install cutting tool into the chuck and tighten.
Check the radial runout of the tool. If the runout is greater than 0.1 mm, replace the tool.
Make sure that the workpiece clamp works reliably.
Upon completion of work, remove the tool from the chuck.
Electrical circuit diagram of the woodworking combined machine D-400
Woodworking machine D-400. Video
Machine D-400 in operation
Technical characteristics of the combined machine D-400
| Parameter name | D-250 | D300 | D400 |
|---|---|---|---|
| Jointing (planing) | |||
| Maximum jointing (planing) width, mm | 250 | 320 | 410 |
| Maximum depth of layer removed in one pass when planing, mm | 5 | 4,3 | 4,3 |
| Diameter of the cutting part of the knife shaft, mm | 75 | 70 | 70 |
| Knife shaft rotation speed at idle speed, rpm | 4000 | 5600 | 5600 |
| Dimensions of planing knife, mm | |||
| Number of planing knives | 3 | 3 | 3 |
| Width of planing tables, mm | 250 | 320 | 410 |
| Total length of planing tables, mm | 1100 | 1420 | 1420 |
| Reismus | |||
| Maximum and minimum thickness blanks during thicknessing, mm | 190..5 | 180..5 | 180..5 |
| Minimum length of workpiece processed during thicknessing, mm | 300 | 300 | 300 |
| Workpiece feed speed in thicknesser mode, m/min | 6 | 10 | 10 |
| Dimensions work surface surface planer, mm | 252 x 600 | 320 x 550 | 400 x 650 |
| Maximum thicknessing width, mm | 248 | ||
| Maximum thickness of the cut layer during thicknessing, mm | 2,5 | ||
| Lifting height of thicknesser table (maximum workpiece height), mm | 195 | 180 | 180 |
| Sawing. Circular saw device | |||
| Cutting depth range, mm | 1..70 | 1..80 | 1..80 |
| The largest diameter of the saw blade, mm | Ø250 x 33 x 3 | Ø250..Ø315 | Ø250..Ø315 |
| Saw mounting diameter, mm | 32 | 32, 50 | 32, 50 |
| Saw thickness, mm | 3 | 2 | 2 |
| Saw rotation speed, rpm | 4500 | 3500 | 3500 |
| Dimensions of the working surface of the saw table, mm | 980 x 470 | 750 x 500 | 750 x 500 |
| Dimensions of the end carriage, mm | 400 x 250 | Stroke of the end carriage, mm | 1080 |
| Vertical milling. Milling device | |||
| Vertical movement of the spindle (maximum thickness of the material being processed), mm | 80 | 80 | 80 |
| Mounting diameter of milling spindle, mm | 32 | 32 | 32 |
| Largest cutter diameter, mm | 144 | 180 | 180 |
| Milling spindle rotation speed, rpm | 4500 / 6500 | 6000 / 8000 | 6000 / 8000 |
| 980 x 470 | 750 x 500 | 750 x 500 | |
| Dimensions of the working surface of the tenoning carriage, mm | 250 x 400 | 335 x 450 | 335 x 450 |
| Maximum carriage stroke, mm | 1080 | 900 | 900 |
| Drilling. End milling | |||
| Maximum diameter of drill, cutter, mm | 16 | 16 | 16 |
| Rotation speed of drill, cutter, min | 4500 | 5600 | 5600 |
| Dimensions of the working surface of the table, mm | 365 x 150 | 450 x 250 | 450 x 250 |
| Drilling depth, mm | 100 | 150 | 150 |
| Longitudinal travel of the table, mm | 150 | 150 | 150 |
| Electrical equipment of the machine | |||
| Type of supply current | 220V / 380V 50Hz | 380V 50Hz | 380V 50Hz |
| Number of electric motors on the machine, pcs. | 3 | 3 | 3 |
| Electric motor of planing, thicknessing, drilling device, kW | 1,5 | 2,2 | 2,2 |
| Electric motor of circular saw, kW | 1,5 | 3,0 | 3,0 |
| Electric motor of vertical milling device, kW | 1,4 | 3,0 | 3,0 |
| Total power of electric motors, kW | 4,4 | 8,2 | 8,2 |
| Dimensions and weight of the machine | |||
| Machine dimensions (length x width x height), mm | 1260 x 1140 x 970 | 1660 x 1500 x 1100 | 2050 x 1560 x 1100 |
| Machine weight, kg | 304/355 | 650 | 750 |
The Russian woodworking combined machine D-300 is designed for complex processing of joinery and simple furniture in medium-sized enterprises. It is possible to perform the following operations: longitudinal, transverse and angled sawing with a circular saw; planing (jointing) along the plane and edge; thicknessing with automatic feeding of the workpiece; milling surfaces of various configurations (copier available upon request) and cutting tenons; drilling and milling of grooves.
The multi-operational woodworking machine D-400 is designed for complex processing of joinery and simple furniture in medium-sized enterprises.
Combined woodworking machines “D-300” and “D-400” are products of a modern technical level for complex processing of parts from various types of wood:
- longitudinal, transverse and angled sawing with a circular saw;
- planing (jointing) along the plane and edge, as well as thicknessing with mechanical feeding of the workpiece;
- milling surfaces of various configurations and cutting tenons;
- drilling and milling of grooves.
It is possible to perform the following operations: longitudinal, transverse and angled sawing with a circular saw; planing (jointing) along the plane and edge; thicknessing with automatic feeding of the workpiece; milling surfaces of various configurations (copier available upon request) and cutting tenons; drilling and milling of grooves.
Equipment Features:
- A rigid bed and cast iron tables reduce vibration and ensure high processing accuracy for a long time;
- Individual spindle drive, from 3 electric motors;
- High quality milling is ensured by a vertical high-speed spindle and a clamping system (optional);
- For cutting tenons, sawing across the fibers and at an angle, a miter carriage is used;
- The saw and milling shafts D-400 have the ability to move vertically and when one is working, the other is retracted to the lowest position, the hole is plugged;
- Thicknessing with automatic feed through two drive shafts. When thicknessing, the planer tables fold down, opening up convenient access to the thicknessing table;
- The drilling and grooving table moves horizontally in any direction using a system of levers and vertically - with a screw with a handwheel and handle;
- For safe operation, the machine is equipped with protective devices and guards. Protective covers have connections for connecting chip ejectors;
- The machine is equipped with eccentric clamps and guides;
- Additionally, it is recommended to install an automatic feeder (automatic feeder) model M3 BABY on the machine.
This model D-400 is most convenient and efficient when working on combined machines.
Video review of the combined machine D-300:
Video review of equipment operation
The Russian woodworking combined machine D-300 is designed for complex processing of joinery and simple furniture in medium-sized enterprises. It is possible to perform the following operations: longitudinal, transverse and angled sawing with a circular saw; planing (jointing) along the plane and edge; thicknessing with automatic feeding of the workpiece; milling surfaces of various configurations (copier available upon request) and cutting tenons; drilling and milling of grooves.
Equipment Features:
- A rigid bed and cast iron tables reduce vibration and ensure high processing accuracy for a long time;
- Individual spindle drive, from 3 electric motors;
- High quality milling is ensured by a vertical high-speed spindle and a clamping system (optional);
- For cutting tenons, sawing across the fibers and at an angle, a miter carriage is used;
- The saw and milling shafts have the ability to move vertically and when one is working, the other is retracted to the lowest position, the hole is plugged;
- Thicknessing with automatic feed through two drive shafts. When thicknessing, the planer tables fold down, opening up convenient access to the thicknessing table;
- The drilling and grooving table moves horizontally in any direction using a system of levers and vertically - with a screw with a handwheel and handle;
- For safe operation, the machine is equipped with protective devices and guards. The protective casings have connections for connecting chip ejectors;
- The machine is equipped with eccentric clamps and guides;
- Additionally, it is recommended to install an automatic feeder (automatic feeder) model M3 BABY on the machine.
This model is most convenient and efficient when working on combined machines.
Technical characteristics of the combined woodworking machine D-300
| Characteristic | Meaning |
|---|---|
| Maximum jointing width, mm | 310 |
| Total length of jointing tables, mm. | 1520 (1700) |
| Maximum thicknessing width, mm | 310 |
| Maximum thickness of the workpiece during thicknessing, mm | 180 |
| Maximum drilling depth, mm | 100 |
| Maximum groove length, mm | 100 |
| Number of knife shafts, pcs. | 1 |
| Shaft rotation speed, rpm | 6000 |
| Number of knives of the knife shaft, pcs. | 3 |
| Feed speed during thicknessing, m/min | 10 |
| Cutting height, mm. | 85 (max) |
| Diameter of saw (saws), mm. | 315 |
| Saw blade rotation speed, rpm. | 3450 |
| Maximum diameter of cutters used, mm. | 160 |
| Planting diameter of cutters, mm. | 32 |
| Spindle speed, min -1 | 6000, 8000 |
| Installed total power, kW | 8,2 |
| Rated supply voltage, V | 380 |
| Overall dimensions, mm. | 1950 x 1520 x 1450 |
| Weight |
