Recirculating dust collection units APR-1200, APR-1600, APRK-1200, APRK-1600 are designed for suction and air purification from dry, non-stick, fine abrasive dust. The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, centrifugal fan with profiled blades, installed inside the housing, built-in silencer and filter stage. As a filter stage, either a filter can be installed on the dust collecting apparatus sleeve made of imported needle-punched calendered material based on polyester fibers(APR-1200, APR-1600), or filter paper cassette of cleaning class F9 (APRK-1200, APRK-1600).

Devices with a filter bag have a relatively small filter surface and, as a result, low dust holding capacity.

Devices with a cassette, due to the developed filtration surface, have a significantly higher dust holding capacity, which makes it possible to ensure long work device without a significant decrease in performance. On dust collecting devices with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m3.

The devices are installed in close proximity to the machines, providing a suction speed of up to 22 m/s. Optimally suitable for equipment with a small load factor of 0.1/0.2. Several local suction units can be connected to one device.

Specifications

APRK-1200,
APRK-1600

APRC recirculating dust collection devices are designed for suction and air purification from dry, non-coalescing fine abrasive dust.

The device consists of a housing, a built-in cyclonic element for separating large fractions, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage. A cassette is installed on the device as a filtering stage. The cassette has a developed filtration surface and, accordingly, a large dust capacity, which allows for long-term operation of the device without a significant decrease in productivity. Polyester cassettes have high mechanical strength and, accordingly, a long service life.

Filter cassettes produced by our company have a cleaning class of F7 (fine cleaning) and E10 (high efficiency filters), the residual dust concentration, as a rule, does not exceed 0.5 mg/m³.

The devices are installed in close proximity to the machines, providing suction speeds of up to 22 m/s. Ideally suited for equipment with low load factors.

Air ducts, transitions and manifolds for several inputs can be supplied with the devices.

1. Fan
2. Cyclone element
3. Cassette (APRC)
4. Electric motor
5. Dust collection box
6. Inlet pipe

Overall dimensions of dust collection units APRK-1600

1. Fan 2. Cyclone element 3. Cassette (APRK) 4. Filter bag (APR) 5. Electric motor 6. Dust collection box 7. Inlet pipe.

Payment methods:

• By bank transfer for legal entities with VAT.

Delivery in Moscow and the Moscow region:

• Transport company Business lines or PEC, others by agreement.
• Items “in stock” can be picked up from the warehouse on the day of receipt cash to our bank account.
• Delivery is carried out within 1-2 business days from the moment your order is ready.

Delivery within Russia:

• Transport company (TC) Business lines or PEC, others by agreement. Delivery to the TK terminal is FREE. (3 times a week).
• Delivery costs TK depend on the region. Our managers will calculate all options and offer the most convenient and profitable delivery method for you.
• By our vehicles in the shortest possible time. Delivery costs are calculated based on the volume and weight of the cargo.

Guarantees

• Our company sells exclusively new products, which are covered by a factory warranty from 12 months to 36 months.

Dust collecting unit APRK-1600

High productivity and degree of purification,
- simplicity of design, reliability and durability,
- maintainability of all wearing parts of the APRK-1600 unit,
- compactness of the unit and versatility of use,
- low operating costs and long service life,
- minimal energy consumption when operating the dust collector APRK-1600,
- the devices are designed for installation in close proximity to machines.

Dear visitors! If you have questions related to the characteristics of the dust collection unit, overall dimensions, operating conditions, how to buy a dust collection unit APRK-1600, contact our specialists.

Price from 55,000 rub. (depending on the unit size and configuration)

Provide suction and air purification from dry, non-stick fine dust and abrasives allows the use of dust collecting devices APR-1200 and 1600. The MiroVent company sells such equipment on favorable terms.

Design of recirculating dust collection units APR-1200 and 1600:

• frame;
• built-in cyclonic element;
• dust collector;
• centrifugal fan with profiled blades;
• built-in silencer;
• filter stage.

Filter bags are installed as filters on dust collection units APR-1600 and 1200. For their production, imported needle-punched calendered material based on polyester fabrics is used.

Models equipped with a filter bag have a relatively small filter surface and therefore have low dust holding capacity. Cassette analogues are characterized by a large indicator due to the developed filtration surface.

The proposed aspiration units are located directly next to the machines and allow the connection of several local suction units. These models provide suction speeds of up to 22 m/s. They are a suitable solution for production equipment with a load factor of 0.1/0.2.

Productivity, m³/h
Installed power of electric motor, kW
Dust container volume, m³
Number of suctions, up to pcs.
Recirculating dust collection units APR, APRK designed for suction and air purification from dry, non-stick, fine abrasive dust during metalworking of products on sharpening, grinding and metal-cutting machines. The dust collecting apparatus consists of a housing, a built-in cyclonic element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage. The following can be installed on the dust collecting apparatus as a filter stage: filter bag made of imported needle-punched calendered material based on polyester fibers, in this case the unit models are designated APR-1200 and APR-1600; cassette made of filter paper (cellulose) of cleaning class F9 (dust cleaning efficiency ≤ 3 microns - 99%) or a polyester cassette of cleaning class M6 (dust cleaning efficiency ≤ 5 microns - 93%), in this case the unit models are designated APRK-1200 and APRK-1600. Devices with a filter bag have a relatively small filter surface and, as a result, low dust holding capacity. Currently, the production of APR industrial vacuum cleaners with a filter bag has been temporarily suspended and only APRK devices with a filter cassette are produced. Devices with a cassette, due to the developed filtration surface, have a significantly higher dust capacity, which allows for long-term operation of the device without a significant decrease in productivity. On dust collecting devices with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m3. Dust collection units APR are installed in close proximity to the machines, providing a suction speed of up to 22 m/s. Optimally suitable for equipment with a small load factor of 0.1/0.2. Several local suction units can be connected to one device. An example of the operation of the dust collection unit APRK-1200 with a metalworking machine at the site of one of our consumers is shown in the photo on the left. Regeneration. APRC devices are manufactured only in versions with manual regeneration (cleaning). To clean (regenerate) the cassette, you must remove it from the device and clean it inner surface using a soft long-haired brush and thoroughly shake out the cassette, then blow it with compressed air from the outside to the inside. Technical characteristics of dust collection units APR, APRK APR-1200 / APRK-1200 APR-1600 / APRK-1600 Productivity, m 3 / h 1200 1600 Installed power of electric motor, kW 1,5 3 Voltage, V 380 380 Dust container volume, m 3 0,04 0,055 Weight, kg 75 98 Number of suctions, up to pcs. 1-2 1-3 Maximum length air duct (hose) from the dust collection point, m 6 6 Noise level, dBA 74 76 Maximum dust concentration at the inlet, g/m 3 5 5 Efficiency of dust removal, average particle diameter d=30 μm, not less, % 99,5 99,5 APRC cleaning class with cellulose cassette F9 F9 APRK cleaning class with polyester cassette M6 M6 to the APRC unit withcellulose cassette, rub. 83"000 108"700 Current selling price including VAT for 2019 to the APRC unit withpolyester cassette, rub. 85"600 113"300 Production time for any APRC unit: 20-25 working days after payment. Selling price including VAT for APR unit with bag filter, rub. temporarily not available temporarily not available Fan Cyclone element Cassette for APR or filter bag for APR Electric motor Dust collection box Inlet pipe Overall and connecting dimensions of APR, APRK connecting dimensions devices for collecting fine dust (APRK-APR)" width="100%"> Dust collection unit model H B d h L APRK-1200 2250 560 160 670 700 APRK-1600 2300 710 180 810 755 APR-1200 2300 560 160 580 700 APR-1600 2400 710 180 605 755 Questionnaire and passport We recommend reading Free astrological program for checking spouses for compatibility by date of birth Queen of Swords of Thoth in a Relationship What is the Aphrodite Club? Torsion fields - what do we know about them? Pericardial topography, volvulus, pericardial sinuses Air sickness, causes, symptoms, treatment Preventive measures to prevent seasickness Related Posts Lighting 2024-09-11 01:55:30 Quiet morning - Kazakov Yu. P. Yuri Kazakov: Quiet morning Read quiet morning full content Yuri Kazakov Quiet morning The sleepy roosters had just crowed, it was still dark in the hut, the mother had not milked the cow and the shepherd had not kicked out... Ceiling 2024-09-10 02:03:12 Jerome Salinger - books and biography Jerome Salinger biography J.D. Salinger was born and raised in the fashionable area of ​​New York - Manhattan. His father, a Jew by nationality, was...