Spinner: application, making it yourself. Material for production

Has your child succumbed to the popular fashion for spinning spinners? Is he asking for a red one, a yellow one, and also a luminous one in the form of a minion? In general, so that it’s not like everyone else? Then you can make a toy with your own hands. Moreover, such a labor lesson will keep both you and your baby busy. And if you still don’t know what a spinner is, there we answered all the popular questions about this modern, arch-modern fun.

We have put together three ways for you to make a spinner, two easy and one more difficult (you'll need dad's help here). But we are sure that both tools and materials should be found at home or in the country. Each instruction is supported by a video tutorial found on YouTube for clarity. So, how to make a spinner out of paper, from plastic caps and made of wood?

Method 1. Spinner made of paper and cardboard.

Simple, cheap and not at all ugly - a paper spinner for beginner spinner makers. An older child can handle it on his own, a little one may need a little help, and the result can be proudly taken to kindergarten or school - where creativity is always held in high esteem.

What you will need:

Cardboard, marker and caps (or a ready-made template from the Internet)
Scissors
Nail scissors or awl
3 coins
Pen refill
Paints or glitter for decoration

Instructions:

Download a ready-made spinner template from the Internet. Or draw it yourself by tracing the lids from plastic bottle on cardboard. You need to cut two pieces of cardboard in the shape of a spinner.
Cut out four more smaller circles. You can circle a coin of a lower denomination.
Glue three coins of the appropriate size on the sides of one of the cardboard blanks.
Glue the other half on top of the blank with coins.
Using nail scissors or an awl, make a hole in the center of the spinner.
Cut about 1 centimeter off the shaft from the handle.
Punch holes in the center of two small circles.
You can paint the finished spinner blank in any color or decorate it with sparkles, rhinestones or stickers with your child’s favorite characters. Everything is your choice and completely unique!
Insert a piece of dowel into one of the small circles and glue it around the edges of the hole.
Insert the circle with the rod into the center of the spinner and glue the second circle on the other side.
Glue the two remaining small circles on top of the ends of the rod. Ready! A spinner made of cardboard, without a bearing and with complete imagination in terms of design is sure to keep a child occupied for some time.

Source: PLASTILIN

Method 2. Spinner made of plastic caps.

This spinner will require a little more materials and diligence, but it will also last much longer. In general, a spinner made from Coca-Cola caps is something like crafts made from matchboxes for older generations. Dear consumables and soul-warming results with minimal costs for an actively functioning (that is, rotating) thing.

What you will need:

Plastic bottle caps
Kinetic sand or plasticine
Glue gun
Nail and lighter
Glue stick
Scissors
Toothpick

Instructions:

Place kinetic sand or plasticine into three bottle caps almost to the top. The main thing is to make the blades heavier.
Use a glue gun to fill the remaining space in the lids to the top.
Make a hole in the fourth (without sand) lid (you can use a heated nail).
Glue three lids with sand to the central lid with a hole.
Cut two pieces about 1 centimeter from the glue stick.
Break a toothpick in half. Place a piece of rod on one end (don't let the toothpick stick out) and thread it through the center of the spinner.
Place the second piece of the rod over the tip of the toothpick on the other side. Ready! If you are very eager, such a spinner can also be decorated creatively - painted with paints (for example, acrylic) or pasted over with something positive. Or you can leave it as is, choosing interesting combinations of caps from bottled drinks.

Source: Feature of the Day

Method 3. Wooden spinner (with bearing)

Let's move on to the most labor-intensive method of making a spinner. You can’t do without parents here, but the result can be safely laid out on the desk along with purchased toys. Again, in terms of design, freedom for self-expression is provided. For those dads and children who are friends with a jigsaw, know how to find bearings on the shelves of hardware stores and know which side to hold the drill on.

What you will need:

2mm bearing
Plywood sheet (5 mm)
Stack of coins
Scissors
Pencil
Hand jigsaw
Sandpaper
Template (or cardboard and marker to create it)
Clamp
Drill

Instructions:

Glue the template onto a sheet of plywood and mark the locations for future holes in each of the circles.
Drill holes in each of the three circles on the sides to make it easier to cut them out later.
Insert a jigsaw into the holes and cut them out.
Cut out the workpiece itself from a sheet of plywood and sand it with sandpaper.
You can paint the spinner any color you like.
Insert the bearing into the central circle; if it does not fit well, you can drive it in with a hammer.
Glue together a stack of coins for the inner circles. Start with a five-ruble coin (put it under the circle), then two-ruble coins and on top again a coin with a face value of five rubles.
Do this for all circles. You can decorate it on top as you wish. Ready! Just think about the benefits of a homemade anti-stress toy: you had a good time together with your child, worked hard and saved money on buying another plastic trinket. And it spins great!

Despite the fact that the peak of popularity of the anti-stress toy that was fashionable in 2016-2017 has begun to subside, many are still looking for ways to create an original little thing that will help them spend time not boring on long trips, long queues or difficult situations. life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - read more in our material.

What are spinners for and how do they work?

Each twist dismantles the individuality of its owner.

Fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children around the globe. Its main purpose is to occupy and distract . Some people think that spinner is useful , because thanks to him you can distract from everyday and psychological problems, relieve irritability, get rid of anxiety. Others claim that thanks to the turntable you can focus on the right things , distracting from everything unnecessary. Be that as it may, the fame of the toy does not need explanation, because literally everyone loves it.

There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on what is available in stock component parts. To understand the specifics of the work when creating a spinner with your own hands, you need to know just a few important points.

Mandatory traditional elements of a spinner are:

bearing;
wings.

The most important part of the spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its sound and vibrations. In many homemade toys bearings are often replaced with primitive designs from toothpicks , which also allow the toy's wings to spin.

Popular articles:

Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas and show individuality.

Unusual design one of the most primitive forms of a toy - round.

The so-called twisters made from plastic, metal, wood, cardboard and many other materials. Often materials are combined. Recently, plastic or metal toys with glowing wings.

Products made of plastic, wood and copper.

The design of many hand-made spinners is amazing. Many people decorate their toys with interesting engravings, illustrations, and icons. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.

Spinner in the shape of a Snitch.

Fairy-tale illustrations and details look very interesting on spinners.

Men's design turntables.

Lately, glow-in-the-dark toys have become very popular.

Fidget spinners in women's design.

Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But to stand out from the crowd, you need to make a certain effort, for example, make it yourself original item for yourself or your child, relative, friend (for example, as a gift). If a child asks for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with creating a memorable toy.

General instructions before starting work

Before you start working on your spinner, you need to have an idea of what exactly a person wants to get as a result. To ensure that the result does not disappoint, you need to work according to a simple scheme.

Stage No. 1 - selecting a model and design

Since there are countless possible models of spinners, and we are all different, and we like different things, then for starters you can choose suitable model from the simple ones. This is necessary so that the process does not turn into punishment. Or you can go the other way and choose the most original model from a special material unusual shape. This option will do for those who have already tried to create things with their own hands.

Options for creating a hand spinner with your own hands.

Stage No. 2 - draw and draw

For everything to work out, you should take care of the drawing on a scale of 1:1. Can be depicted on paper future model spinner, or you can search for ready-made drawings on the vast expanses of the Internet.

Drawings and blanks.

Stage No. 3 - prepare tools

Now that the creator has decided on the design and the schematic image is ready, you can begin to prepare all the necessary materials.

The first step is to purchase (or withdraw from old technology) bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it ends up in the toy. Why clean the bearing from grease? It makes the rotation slower, and also gets your hands, clothes and furniture dirty.

In addition to the spinner assembly parts, you will also need the following tools:

Construction marker (pen, pencil, regular felt-tip pen);
Scissors;
Stationery knife;
Elements decorative finishing(optional);
Glue;
Special tools for creating the wings we need (tools for working on wood or metal).

Preparatory stage.

Stage No. 4 - creating a spinner

When the preparation is complete, you can safely start making the toy with your own hands. Next, we will consider several popular options for creating spinners from various materials in several ways.

Varieties of hand twisters made from improvised means.

Spinner made of paper and cardboard without bearing

The most popular option for those who are in no hurry to run for a bearing and cut out squiggles from metal or wood is to make the first simple spinner from cardboard and paper. It’s really not difficult to do this with your own hands, and if you show a little more imagination, then a simple cardboard can turn into an original canvas for your favorite icons or drawings.

Tools for work:

ruler;
compass;
pencil;
pen;
scissors;
stationery knife;
cardboard;
glue;
toothpick;
nut - 2 pcs.

You can watch the step-by-step process in the video:

Using plastic lids

Another easy way To create a spinner with your own hands, which will require a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here's a little step-by-step instructions.

Tools for work:

caps - 4-6 pcs.;
plasticine (you can use kinetic sand);
glue gun;
glue stick;
lighter;
awl;
stationery knife;
toothpick;
scissors.

Work progress:

Fill three lids (or more if the spinner has more wings) almost to the top with plasticine. We secure it with a layer of glue from a gun, which should fill the lids to the top.
The main cap remains without filler. We make a hole in it with an awl in the very center. We glue the lids with plasticine on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
Take a glue stick and cut off two equal parts - about 1 cm each.
We break the toothpick in the center. We insert it into the central cover and attach pieces of silicone rod to the ends so that it is convenient to hold the piece of wood.
Your DIY spinner is ready!

Wooden with bearing

A wooden spinner is the most pleasant and affordable option, which you can create with your own hands. A real lesson in labor for adults and children!

Tools for work:

Glue gun;
Bearing 2 mm;
Plywood sheet, thickness 5 mm;
Several coins;
Drill;
Hand jigsaw;
Clamp;
Scissors;
Sandpaper;
Pencil or construction marker;
Ready-made spinner template.

Work progress:

Print out the diagram and cut it out. We fix it on plywood sheet and circle it. It is necessary to mark the places in each of the circles where there will be holes.
We drill additional holes on the sides of the circles with the door, allowing us to cut out beautiful figure circle from inside the wing.
The future spinner needs to be cut out of plywood with a jigsaw. Then we carefully sand the edges and surface until the surface is smooth.
The bearing must be inserted into the hole prepared for it in the center. If you have difficulty, you can use a hammer and hammer in metal element in a wooden one.
The wings of the “spinner” need to be weighted down—for this you will need coins. You can glue the weights for each hole in the following order: a coin with a face value of five rubles, then two, and again five, as shown in the video.
You can cover it with a solid color paint, or you can decorate it with another interesting and in an original way- there is room for imagination, which is so nice to realize with your own hands.

Video tutorials on creating spinners

To get comfortable with creating a spinner with your own hands, you can watch some video tutorials on this topic. The conditions for creation can be very different, as well as materials and styles, but a homemade spinner can turn out no worse than a factory one.

Here's another way to create paper twisters, this time in the shape of shuriken :

Minimalistic spinner made of bearings and clamps:

Here's a great spinner option for girls:

Craftswomen with great experience They know how tedious and difficult the work of stringing beads on a fishing line or thread can be. Hands and eyes get tired quickly, even with a minimal amount of work. You have to tinker for hours, but the volume is minimal. And if you have to redo it, then the desire to do it further disappears altogether. To help craftswomen, there is a spinner for, which significantly speeds up and simplifies the process.

Translated from English, Spinner means spinning machine. This reliable assistant, which is advisable for every craftswoman to use, regardless of skill level. There are many offers in the trading network. But the design is so simple that you can make it yourself. The information provided will introduce readers to how to make a bead spinner with your own hands. The most primitive machine, which is made from scrap materials that can be found in every home.

Step by step instructions

Before you make a bead spinner, you need to prepare the material. You will need:

plastic container;
rod (pen body, pencil);
stand;
scissors.

Follow the suggested instructions. It will only take a few minutes to work.

Using scissors, make holes in the containers strictly in the center. It is not advisable to use a knife, as the hole will be uneven.
Insert the rod, connecting the containers together as shown in the photo.

This is all the work, in front of you is a ready-made spinner.

Self-production option No. 2

To work you will need:

plastic container;
self-tapping screw

Just insert a self-tapping screw in the center of the container, and the bead spinner is ready. It is better to heat the screw head so that it sticks and remains motionless.

To make such a device at home, there is no need to involve men in the work. Any woman can handle this work on her own.

Improved model

To make it you will need:

an old computer fan or other rotating element;

container for beads.
glue.

It is enough to secure the container on the rotating surface and the work can be considered complete. Insert a special needle into the container. Twist the device slightly, the beads are collected much faster.

Terms of use

If the craftswoman has no experience in using a spinner, then the attached instructions will help you quickly master the indispensable assistant.

Fill the cup.
Take a special needle for a spinner or simply bend a piece of wire.
Place the needle or wire into the container.
Scroll the container slightly with your other hand.

The beads are assembled on their own, all that remains is to move them further along or.

Having mastered this simple technology, you can save a significant part family budget. The retail chain offers a wide range of spinners. But most of them are quite high. The store presents simple spinners With electric drive, which will significantly speed up the process of setting beads.

But if there is no need to purchase a ready-made spinner, then you will need a special needle. For example, if you need to string beads on a soft fishing line or thread, then without a needle, even with a spinner, it will be problematic to cope with this. Such a mechanical device made with my own hands in collaboration with a needle, will greatly facilitate the work of the craftswoman.

The spinner is a new fun toy that adults and children will enjoy. It appeared in America last year and in a short time gained enormous popularity. The principle of operation of the toy is simple: with the middle and thumb of one hand we grab the central bearing. With the other hand we activate the wings of the turntable. With sufficiently good control skills, you can operate the toy with one hand. Use your index finger and thumb to grasp the center bearing. The hand spinner consists of three parts: a housing, a bearing and a plug.

Advantages of a spinner

Hand motor skills develop, fingers become more sensitive. This tool will be very useful for those who have suffered various hand injuries.
This is a kind of anti-stress toy that calms the nerves. In addition, thanks to it, you can concentrate, restore efficiency, relieve anxiety and nervousness, and also become less irritable.
The spinner will be an excellent companion during a long trip; it can be a great way to occupy your free time.

LED spinner on the controller

Some people buy them, while others make them themselves. Here circuit diagram spinner with LEDs controlled by a microcontroller. When rotating, all sorts of pictures and signs are created.

Project Parts List:

MK ATtiny-45
5 smd led (1206)
5 smd resistor (47 ohm)
1 battery 16 mm (3 V)
22mm diameter bearing
A piece of wood or plastic

As you can see, the scheme is simple, but if anyone doesn’t understand something, study the datasheet from Atmel.

The positive LED leads go to PB0 - PB4 on the MK. To limit current, resistors are added between them. The negative contacts of the LEDs go to minus - GND.

Possible different options displaying figures, so a browser page is made to create image sequences for the spinner. In the general file, the link to which was above, you will find the drawing, firmware and program.

Spinner with ball bearings

This spinner consists of a housing on bearings and a plug. The center bearing is the most important. The speed and time of rotation of the spinner depends on its quality. The plugs are inserted into the central hole.

One of the most accessible means at hand is paper and cardboard. A hand spinner is made from paper using a knife, four bearings, and glue. First you need to make drawings. Using a utility knife, cut out pieces from paper or cardboard. The holes for the bearings are cut with nail scissors or a knife. It is important to ensure that their diameter is slightly smaller than the diameter of the bearing. This is necessary so that the bearings fit tightly into the holes. The number of parts depends on the width of the bearing. Gluing requires a lot of glue. it will give the product greater strength. After finishing the work, we paint the toy in any color.

To increase the moment of inertia, it is necessary to provide weights. The most simple option are coins glued to each other. For 10 mm plywood, you need to glue 8 ten-kopeck coins together. Internal surfaces We level the workpieces using a drill. We carefully and quickly bring the outer surfaces to the contour using a grinder with a grinding wheel. We remove all remaining irregularities manually with sandpaper.

For those who know how to work with a jigsaw and drill, you can make a spinner out of wood. Wood is an environmentally friendly material. The product turns out beautiful and pleasant to the touch. First we choose durable wood. For beginners, it is better to use plywood. Working with wood requires skills. First prepare a drawing. You can come up with it yourself or simply print it from the Internet. Place the paper blank on the wood or plywood and trace it with a pencil. Cut out and sand the part with sandpaper. The hole can be cut out, but it is better to use a drill to make the hole even. Important point: Use a drill to make a hole halfway on one side, and then turn the part over. This way you have a better chance of getting the perfect hole for the bearing. The thickness of the wood or plywood should be exactly the same as the bearing. If it is a little larger, it needs to be sanded.

Typically, a bearing from skateboard wheels, rollers or scooters is used. They have standard size diameter 22 millimeters, width and inner diameter can be selected at your discretion.

After experimenting with sizes, we came to the conclusion that the ideal size for long-term torsion is 25-27 mm in diameter. At the same time, for a spinner it is better not to take bearings smaller than 20 and larger than 30 mm.

Finger spinner will be a savior for those people who bite their nails, pens, or the like during stress. The fidget spinner is designed to relieve stress, warm up your fingers, as well as concentrate your attention and develop hand motor skills. Such a device will become an irreplaceable thing for children and adults.

The surface of the materials can be lumpy or smooth, and you can find a variety of color options: white, black, red and many others. The size of the toy is small, which allows you to carry it with you. Unusual and stylish design can make a great accessory out of it.

How to make a spinner with your own hands

Why do you need a spinner from a store if you can make it yourself? The whole process of work will take a little time, and its design is simple. In order to start tinkering, you will need:

Textolite;

furniture ties;

bearings;

drill and drill bits for it;

ruler, compass.

First you need to take the PCB and cut out the base for the spinner from it. First, using a compass, a drawing of the toy is drawn, and only then it is cut out. Before you start drawing the base, you need to find out the size of the bearing, for example, it is 22 mm, so the compass needs to be inserted into the PCB at 11 mm and draw a circle. After this, insert a compass at 18 mm and draw another circle. An individual calculation is required for each case. This is easy to do, all the different options are presented on the Internet, there are also stencils for the spinner.

Then we start working with bearings. Each of them needs to be wiped with resin, after which they can be connected to the block. Only after this can you drill holes for the sleeves. To do this, you need to mark six sectors of the spinner. Each intersection point of sectors and circles is the center of the sleeves. You need to drill holes in each intersection, exactly six pieces. Then you need to drill out the center of the spinner.

Each sleeve must be sanded before being inserted into the hole. This is very simple to do; to do this, you need to insert it into the drill chuck and rub it against the sandpaper until all the paint is removed from them. Each of the sleeves must be lubricated with the same resin and pressed in.

After all the steps are done, the toy needs time to dry. This will require a minimum of six hours, after which you can enjoy playing with the hand spinner.

Video - the coolest spinners

In beadwork, as in any handicraft, along with complex manipulations there are a number of simple monotonous operations. They take a lot of time, but further process is impossible without them. In our case, we are talking about stringing beads on a fishing line.

Fortunately, modern gadgets come to the aid of craftsmen. One of them is a bead spinner. Let's figure out what principle this device works on and how to make a bead spinner with your own hands.

Operating principle

To understand how a bead spinner works, you need to imagine a regular spinning wheel.

The bowl with beads unwinds and the beads themselves are quickly put on the placed under right angle(90 degrees) fishing line.

Advantages

Using a spinner for stringing beads has a number of clear advantages:

saves typing time required quantity beads;
the load on vision is reduced, because there is no need to look for a hole in each bead yourself;
labor productivity increases.

A bead spinner allows you to significantly speed up the weaving process. But there is only one case when this gadget will be absolutely useless to you. This is the creation of a product with a complex pattern, when it is necessary to string beads on a thread according to color in strict accordance with the diagram.

Types and characteristics

There are two types of bead spinners on sale: manual and automatic. Let's look at each of them in more detail.

Manual

A hand beading spinner consists of a plastic, ceramic or wooden bowl placed on flat base with a convenient vertical handle in the center.

The bowl unwinds easily, allowing the beads to be threaded onto the fishing line. The master sets the rotation speed of such a spinning wheel independently.

Auto

The main difference between an electric bead spinner and a manual one is that its bowl rotates automatically. The master can only bring the fishing line. The spinning wheel runs on mains power, although you can also find a battery-powered bead spinner on sale.

How to make a spinning wheel with your own hands

However, many needlewomen prefer homemade spinning wheels.

Photo source: http://biser-mania.ru/master-klassy/spinner-dlia-bisera

So, in order to make a bead spinner you need to find:

a round plastic box with a flat bottom;
body from ballpoint pen;
ruler to measure the required distance;
pencil to make markings;
stationery knife;
scissors;
candle or lighter.

Creation algorithm homemade spinner for beads the following:

From the base of the box, a distance of 27 - 29 mm is measured upward, a line is drawn, the excess part is cut off and the edges are singed.
In the center of the base of the box, use a stationery knife to make a hole into which the body of a ballpoint pen is tightly inserted. (To prevent the handle from slipping out, you can glue it with a glue gun).
The operation of the spinner is checked. It should spin like a spinning top.

Application

Let's take a step-by-step look at how to use a spinner for stringing beads:

2/3 of the bowl is filled with beads.
The end of the line is bent 90 degrees and lowered into the bowl.
The vertical rod carefully unwinds clockwise.
Beads are collected onto a fishing line.

As you can see, using such a device is convenient and simple. However, its ability to simplify the process of creating any jewelry is very obvious.

Storage and care

Neither purchased nor homemade devices do not require certain storage conditions, except perhaps a clean, dry room and protection from children and pets.

Plus, the running parts of purchased spinning wheels can be lubricated with machine oil.

If you are a professional bead weaver and do large amounts of work, then faithful assistant you will get an automatic spinner.
For those who are just starting to learn the basics of working with beads and do not want to waste time on monotonous stringing of beads, a hand spinner will be useful.
If you are not sure of the benefits of such a gadget and do not want to spend extra money, then try making a bead spinner with your own hands.

However, which gadget to give preference to, each master has the right to decide for himself.