When carrying out renovations in a bathroom, you inevitably have to deal with open pipes that you would like to cover beautifully. In this article we will tell you how to hide pipes in a toilet using plastic panels and blinds, and also show photos of interesting solutions.

Preparatory work

The photos and videos at the end of the article show the final results of masking the water supply, as well as detailed sequences of work processes. But before you start hiding the pipes, you need to remember the following important preparatory points:

• Communications must be masked in such a way that they can be accessed if necessary. After all, it happens that the occurrence of an emergency situation leads to additional troubles and expenses, for example, it is necessary to break a wall or partition.
• Before installation, sewer and water pipes should be carefully checked to ensure that no leakage occurs during operation.
• All connections must be tight.
• Each transition element of the pipeline (coupling, angle, tee) responsible for hot water supply must be made of the same material as the pipe itself. Then the heating of individual pipeline elements will be accompanied by equal expansion, which will prevent unpleasant consequences from occurring.
• It is better to use connecting elements to a minimum, then breakdowns will occur less often.

Possible ways to disguise pipes

To get rid of the unsightly appearance of sewer and water pipes, you can use one of the following methods:

Installation of a decorative box. With the help of such a structure you can not only hide required amount pipes, but also acquire functional shelves for various jars, tubes or bottles. To avoid turning a minor leak into a real flood, you need to take a rational approach to aesthetic design. Decorative box should be made only from materials that can be easily dismantled (plasterboard, plywood, etc.). And if the box is equipped with a door, then dismantling may not be necessary.

Making a cabinet for a sewer pipe. The use of this method of disguise allows you to save both space in the toilet and cash, which would have to be spent on a cabinet under the washbasin. In addition, meters, filters and other equipment remain available throughout the entire period of operation of the system. When hanging shelves, you should pay attention Special attention the fasteners used, because in the future they must withstand not only the shelves themselves, but also everything that will be installed on them over time.

Application of roller shutters is the simplest and most quick way masking pipes in the toilet with your own hands. Externally, such a niche will look very neat and attractive, and the roller shutters themselves are very easy to use. The use of this option is especially beneficial if masking of the boiler is required, since this device cannot be completely covered with a solid partition. At any time you may need access to temperature sensors, and a rising roller shutter can fully satisfy this need.

The use of plastic panels for finishing niches. This material imitates the coating for which it was used. ceramic tile, stone or natural wood. In addition, installation work will not take much time and will not require any special knowledge, and performance characteristics such panels are intended to be used in conditions high humidity. Just before starting work, you should make sure that you have wooden frame, to which each plastic panel will be attached.

In addition, you can experiment with ceramic tiles, which are also often used for camouflage. sewer system. For example, you can install a plasterboard partition on an aluminum frame, while leaving the window necessary to provide access to the pipes. Then close this window with a special screen or a small tiled door. The presence of such a hatch will not have any negative impact on the interior of the bathroom, but will provide access to all communications.

Choice correct option masking of pipes depends on many factors, but you always need to monitor how well and correctly the installation is done, since in a toilet that usually has small area, it is quite difficult to carry out work of this kind.

The right decision in combination with quality work will result in not only an attractive, but also a functional toilet.

Video

See instructions for making a PVC box:

Photo

Open placement of water and sewer lines is most often perceived as a violation general design toilet room, which is usually eliminated by masking the pipes located in it. The issue of insulating openly laid pipe lines arises with particular urgency when there is a common sewer riser in the toilet.

Due to the need to solve this problem, we decided to familiarize all interested parties with how to sew up pipes in a toilet, safely hiding them from the eyes of visitors. In the process of studying information on this topic, it turned out that a variety of building materials can be used to close pipes.

Material selection

• environmental safety (absence of harmful emissions at high humidity and ambient temperature);
• resistance to corrosion, as well as its spread to neighboring objects;
• the possibility of arranging a fairly light structure that does not clutter up a small room.

When deciding on materials suitable for closing pipes in a toilet, the contractor is usually offered the following options:

• plastic panels,
• MDF panels,
• moisture resistant plywood,
• plasterboard (moisture-resistant).

In addition to the characteristics of the material used, the choice should also take into account its decorative properties, ensuring a harmonious combination of the cladding with the interior of the room itself.

Preparing the supporting frame and marking it

Carrier installation frame structure you should start by measuring the niche in which water and sewer pipes are traditionally located in communal apartments. To do this, you will have to arm yourself with a tape measure and make accurate measurements of the location of all the highways available in this place.

Small doors should be provided in the casing to provide access to water meters and valves.

Upon completion of the measurements, you will be able to draw up a small sketch containing precise instructions on the places where the frame elements are attached, as well as on the main dimensions of the future cladding structure.

Sheathing with plastic panels

As an example of covering pipes placed in a toilet niche, consider its lining plastic panels. To the undeniable advantages of using plastic materials The following are their advantages:

• simplicity and ease of installation, which does not require much time;
• light weight of the structure and the ability to quickly dismantle it;
• high moisture resistance;
• attractive appearance;
• long service life.

Before the beginning installation work you should prepare all the materials and tools necessary for this:

• the plastic panels themselves;
• aluminum profiles (guides) necessary for arranging the frame;
• fastening elements of a prefabricated structure (self-tapping screws, screws, dowels or nails);
• perforator;
• mounting knife;
• building level, screwdriver and screwdriver.

Work order

There are two options for installing panels installed in the toilet:

1. Complete or “blind” hiding of a niche with pipes by aligning the installation plane of the panels with the wall surface. This finishing method leaves no traces of the presence of pipes (except for doors), which significantly improves the design of the toilet room. But at the same time her effective area is somewhat reduced.
2. Partial closure of a niche, in which only one pipe is closed using boxes. The advantages of this method include saving finishing material and reducing the space occupied by the cladding.

Having made a choice suitable method closing the niche, you can proceed to marking the places where the aluminum guides (profiles) are attached. For subsequent installation of the guides, you should use the previously prepared sketch; in this case, the length of the profile blanks is adjusted using a hacksaw for metal. Direct fastening of the guides to the walls is carried out using dowel-nails, driven in at intervals of 30-40 cm. The sheathing panels themselves are attached to the guides using self-tapping screws.

It makes no sense to tightly close a niche with highways that have obvious defects. This is explained by the fact that at some point in time you will still have to completely dismantle the casing and frame to carry out overhaul pipes

Video

We invite you to watch a series of videos about installing a plasterboard box in a toilet:

Any toilet in an apartment is a concentration of all kinds of pipes, differing both in purpose and in diameter. It contains a sewer riser and a cold and hot water, and sometimes heating pipes. In addition, there are all kinds of taps, meters and filters on the pipes, which do not add any special charm to the overall interior of the room.

There is no way to get rid of the web of these pipes and plumbing fixtures, for the simple reason that it is in the toilet that communication systems least interfere with the inhabitants of the home. However, such an intricacy of communication systems may appeal to the rare exotic lover. At the same time, today there are many ways how to hide pipes in a toilet.

Choosing materials for hiding pipes in the toilet

When starting to solve the problem of how to close the pipe in the toilet, first of all you need to decide suitable material. At the same time, focusing only on the aesthetic component is wrong. This is primarily due to the fact that the material used in the finishing of toilets and bathrooms must meet the following characteristics:

• the design of the material should be obtained as light and compact as possible so as not to clutter up the already limited space;
• the material should not be susceptible to corrosion and exposure to chemicals used to maintain hygiene in the toilet;
• when there are differences temperature regime or increasing moisture levels, the material should not deform or change its structure.

But even taking into account the strict selection criteria, materials for finishing or construction various designs there is quite a lot in the toilet. Plastic panels, moisture-resistant grades of plasterboard or plywood, decorative MDF boards and much more. And finally, when choosing a material, you need to ensure that it fits harmoniously into the overall interior of the toilet.

Options for sewing sewer and water pipes in the toilet

Using plastic panels to hide pipes in a toilet

Installation of decorative plastic panels considered one of the most common methods to hide pipes in the toilet. This option has the following advantages:

• decorative panels made of plastic, quite inexpensive;
• they are easy to install;
• All decorative elements interchangeable;
• on construction market presented the widest range plastic panels.

If we talk about the installation of such material, then it is done on a pre-arranged metal profile frame, which is built around the communication pipes in the toilet. It is on this frame that decorative plastic panels are sewn. For frame It is advisable to use a galvanized profile, which is not afraid of moisture.

At the wall, a starting strip is attached to the frame with self-tapping screws and panels, pre-cut to the appropriate length, are inserted into it one by one. It is important that the next panel fits tightly with its edge into the lock of the already installed element.

If the structure has large dimensions, then it is advisable in its central part additionally secure the panels using self-tapping screws. But for this, intermediate transverse elements must be present in the frame.

Covering the pipes in the toilet with plasterboard

Suitable only for toilet or bathroom moisture resistant drywall. This is due to increased moisture in rooms of this kind. Moreover, this design for hiding the aesthetic defects of pipes in the toilet has the following advantages:

• the material is more durable than plastic panels;
• the design is as rigid and reliable as possible;
• For finishing drywall uses wallpaper, tiles, paint or any other finishing material that emphasizes the overall style of the room.

The procedure for constructing a plasterboard structure is completely similar to installing plastic panels. The only difference is the strength of the frame, which must be constructed with a large number of crossbars, since plasterboards are heavier than plastic ones panels.

How to hide pipes in the toilet using blinds or roller shutters?

The use of blinds or roller shutters is interesting because they provide free access to communication systems. But to install them you will need to build either a false wall or plastic box, or plasterboard construction, which will be the basis. In addition to this you will need cut a niche in the structure for installation of blinds or roller shutters.

Also important is the material from which the blinds or roller shutters are made. In most cases, more expensive aluminum systems are used, as it is resistant to moisture and corrosion. In addition, if a motorized system is used, the motor must be in a sealed housing.

Closing the pipes in the toilet - straight and oblique false wall construction

Towards the most radical solution to camouflage plumbing pipes In the toilet, the construction of a false wall can be attributed. At the same time, on finishing stage such a design can be finished with the material that was used during the renovation of the room, giving a finished look to the interior.

To construct such a structure, markings are made on opposite walls. In this case, the distance from the wall along which the communication systems are located should be enough to hide the pipe furthest from it. According to the resulting markup, using dowels and screws, a guide profile is attached, into which jumpers are inserted in increments of 60 cm. After this, sheets of plasterboard, previously cut to the required width, are attached to the resulting structure.

The inclined structure of the false wall is constructed in the same way as its direct counterpart. Its only difference is that one of its edges retreats from the main wall to the distance of the communication pipes, and the other is closely adjacent to it. It is advisable to close the pipes using this design when the communications in the toilet are assembled in a row near the corner. A straight false wall in such a situation steals useful space, of which there is already little in the toilet.

Square box for hiding pipes in the toilet

The construction of such a structure is advantageous when all pipes are concentrated in one bundle. The technology for arranging square boxes is reminiscent of installing a false wall. A square-shaped frame is created from galvanized metal profiles, which surrounds the pipes in the toilet along the perimeter.

Moreover, for the construction of the box it is not necessary to use metal profiles, or you can replace them with wooden blocks, which are pre-treated with moisture-repellent substances. After the frame is formed, plasterboard is sewn onto it, by analogy with a false wall.

At the corners, the structure is protected with metal corners that sit on the putty. As decorative finishing Any material used in the interior of the toilet, emphasizing the overall styling, is suitable.

Using a multi-level box

The assembly of a multi-level structure is similar to the construction of a box. In fact, not one, but several boxes are formed, which are arranged sequentially. But this option is more interesting in terms of design design premises. Thanks to multi-level boxes, you can build niches that will later be used to place shelves.

Hide sewer and water pipes from human eyes - design technique, which has gained great popularity among apartment owners. Arranging false walls and boxes, using roller shutters and blinds or other structures that hide communication systems, allows you to transform the space in the toilet, making it unique and attractive, hiding all its shortcomings.

By approaching the issue with imagination and with a little effort, you can make something out of the old sewer riser beautiful decorative column, finishing the pipe with mosaic. The resulting niche from multi-level boxes can be used to build shelves or arrange a cabinet For household chemicals. The main thing is that such a design emphasizes the overall styling of the room, and then the toilet will delight the apartment residents with comfort and coziness.

Noticeable communications in the bathroom do not add attractiveness to the room. How to close the pipes in the toilet? We offer you several fairly simple and reliable options for upgrading a room without compromising its functionality.

We have already looked at how it is possible. The same methods are suitable for the toilet. Let's remember them.

Plastic panels or plasterboard

The fastest way to close communications in the toilet is with plastic panels. They are suitable regardless of the finish of the walls, floors and ceilings. The main thing is to choose the color and pattern.

Advantages of this material:

• environmental friendliness;
• simple installation;
• quick installation;
• low cost;
• the ability to install a door to access meters or spikes where breakthroughs are possible;
• possibility of installing a collapsible structure;
• no additional finishing required.

Second convenient option material for the structure with which the pipes will be masked is plasterboard. A toilet is not a bathroom, but it’s still better to use a moisture-resistant one. Advantages:

• environmental friendliness;
• simple installation;
• low cost;
• possibility of installing a collapsible structure;
• possibility of installing a door for access to communications.

The only drawback of drywall is the need to finish it. But, on the other hand, you can make it the same as the rest of the walls in the toilet.

When you decide on the material for the box, you will need to choose its design. Below we will describe everything possible options for installation of structures made of plasterboard and PVC panels.

Regardless of the method you choose, don't forget about access to counters and spikes. To do this, you need to install a door. It can be hidden, or it can be ordinary white metal, these are sold in almost any hardware store.

The whole wall is closed

The first option for hiding communication pipes in a toilet is to cover the entire wall with pipes. This is done on a metal profile box. In the space where there are no pipes behind the decorative wall, you can make storage for small items (toilet paper, household chemicals, etc.).

There must be at least 3 cm between the mounted wall to cover the pipes and the pipes themselves! This does not depend on the type of structure chosen.

Oblique false wall

If the pipes are only on the side, then you don't have to cover the whole back wall premises, it is enough to close only the corner with communications.

Square box

If you are wondering how to cover the pipes in a toilet and leave more space, then the answer is simple: make a box just around the pipes. If they go in the corner along the walls, then you get a kind of column in the room. If they walk on the floor, then it will look like a step.

Multi-level box

If the pipes do not run clearly along a certain wall, but, for example, only to its middle, then you can make a multi-level box and use it as a shelf for decor, household chemicals, or something else. This method is not suitable for installation from plastic panels.

Roller shutters

Roller blinds are successfully used to hide pipes. They are installed less often than structures made of plasterboard or PVC panels, because the installation itself takes longer, the structure is more expensive, and the appearance is not very attractive, that is, it is not very attractive. But this way you get access to any pipes behind the panel and space for storing small items. Of course, for the latter you will have to make several shelves.

Utility cabinet

A very convenient and attractive way to cover pipes in a toilet room is to install cabinets made of chipboard, wood or plywood. Bottom part pipes can be covered with a plastic screen that matches the color. This way you kill two birds with one stone: you create additional storage space and decorate communications.

The only disadvantage of this method is the price. It is the highest compared to all other options, even if you install everything yourself.

Decorating pipes

Using a little ingenuity and skill in making various hand-made products, you can decorate the pipes that run through the room using mosaics, decorative painting, rhinestones and others interesting techniques or materials.

The choice of method and materials for decorating or hiding pipes in the toilet always remains with the owners. There are no strict recommendations or contraindications for any of the options listed above. Even in small room Usually it is possible to install a structure made of plasterboard, PVC panels or chipboard boxes.

When making repairs to a toilet, many people try to disguise the pipes that are in plain sight. Today, the construction market offers a large number of finishing materials that can be used to hide technical unit, while leaving open access for regular and emergency maintenance. In this article we will look at several options for hiding pipes, as well as some nuances of the work.

To hide plumbing communications in the toilet, various finishing materials, as well as special equipment, are used.

Drywall

This is one of the most popular ways to close a toilet pipe.

To the benefits plasterboard sheet(GKL) include the following:

• availability;
• safety;
• ease of installation and dismantling;
• ease of use;
• low cost;
• possibility of installing additional structural parts;
• variety of finishing options.

PVC panels

Polyvinyl chloride panels help solve several problems at the same time. Firstly, they cover the pipes perfectly. Secondly, the design takes on a more aesthetic appearance. The main advantages of such products are the following:

• speed of installation;
• low installation complexity;
• low price;
• ease of disassembly;
• wide range of colors and textures;
• no need for additional decorative finishing;
• moisture resistance;
• ability to withstand temperature changes.

Box

A special box is made from plasterboard or PVC panels, designed to cover existing communications. The selected building material is installed on the frame. When installing such a structure, it is necessary to provide in advance the possibility of free access to important details communications for carrying out preventive maintenance or repairs. A box made of plasterboard requires additional finishing. Most often, ceramic tiles are used for these purposes. To give the box an attractive appearance, it can be coated with bright paint.

Plumbing cabinet

Unlike a box, this piece of furniture is equipped with doors and a large number of built-in shelves designed to store various household supplies. Since the design of a sanitary cabinet is quite simple, an ordinary furniture facade. But it is also possible to make such a product according to custom sizes by placing an order with a company that produces such furniture.

Roller shutters

This design appeared quite recently. It includes several base frames, as well as a large number of narrow panels. If necessary, they can easily be turned into a roll, providing free access to the necessary communications. The material of roller shutters is not afraid of moisture. This device is controlled using buttons or a remote control.

All roller shutters on sale are always painted beautiful colors, have a pattern or unusual ornament.

Blinds

This design is reminiscent of the previous closure option sewer pipes. In principle, roller shutters are a modification of blinds. However, the latter are made much simpler: there is no frame in their design, and control is carried out only mechanically. For the manufacture of blinds, only plastic is used, which is resistant to moisture and has low strength.

Additional materials

Basically engineering Communication can be decorated using various available means:

• cover the pipes with bright paint;
• draw original patterns on them;
• hide communications by making them in the form of trees; the toilet will look like a dense forest or impenetrable jungle;
• wrap the pipes with braid;
• decorate products with artificial plants;
• cover the surface of communications with original decorative stones;
• use various stickers or special stickers.

Preparatory work before installation

Before you start closing the pipes, you need to inspect all plumbing communications and make sure they are in good condition. For prevention, it is advisable to replace outdated parts with new ones.

You must be confident that the connections will not leak in the next few years. It is necessary to inspect the water pipes for rust and traces of condensation. It is important that all joints are sealed.

Making your own toilet box

Work should start from the bottom, gradually working your way up. First you need to determine the dimensions of the closed structure. Its walls should be at a distance of 7-10 cm from the pipes. When laying a non-standard engineering structure, when cylindrical elements branch at the top, it is advisable to place the box at the bottom closer to the pipe. A small closed structure is mounted in the upper part. It can be assembled from profiles using ceiling guides.

How the guides are set

First measure, then cut out the side parts the right size. All operations are carried out using installation technology plasterboard partition. Guides are mounted on the floor, maintaining an angle of 90 degrees. Perpendicularity is checked with a special square. One of the elements must rest against the other.

Then the ceiling part is taken. She lays on flooring, drawing a line from the stop side to the floor in increments of 60 cm. After marking is completed, honeycombs are cut - ceiling guides 10-12 cm long. They are fixed on the part in the center of the applied mark. In this case, it is important to properly secure the honeycombs.

After this, the guide is inserted into another element nailed to the floor. Next, a square is placed, the structure itself is fixed with a seed.

Profile for connecting guides

To secure the guide in a level position, apply a two-meter level to it. With its help, the profile is measured, which will extend beyond the side walls of the guides. After that, all the parts are attached to it. The outermost element is set with a building level.

The first profile is installed at a height of 1.80 cm from the floor surface.

In principle, this distance can be any. The main thing is to maintain a step of 60 cm. Next, additional profiles and drywall are installed.

How to install drywall

The first sheet is fixed first building material. The vertical is checked by the guide. Then the next profile is installed and the second gypsum board is fixed. The result is a box wall.

The width of the plasterboard sheet must exceed the corresponding value of the already laid plasterboard. All excess is cut off after installation.

How to cut drywall correctly

Take a painting knife and use it to back side sheet, a line is drawn along the guide. Once the cardboard is cut, you need to break off the plaster. Use a knife to make a line on the opposite side. The remaining drywall can be easily removed.

After trimming the building material, you can return to installing the box. The side wall is already installed. A guide is fixed in the upper part, which should be slightly longer than the part fixed at the bottom. It is intended for assembling a small structure.

Manufacturing of profiles and additional guides

Another element is inserted into the guide fixed to the ceiling, occupying a vertical position in the corner. Due to the fact that the height of the upper internal covering of the room exceeds 4 m, it is necessary to extend the guide with an additional ceiling profile.

The next step is to cut the profile into parts of the required size. The result is jumpers installed every 1.20 cm on the untreated side.

Another sheet is added from the sewn edge. A guide is attached to it horizontally. A part is also installed on the upper part, maintaining an angle of 90 degrees.

All the missing guides are mounted on the wall: the first element in a horizontal position, the second in a vertical position.

Parts of the required size are cut out from a sheet of drywall, which are subsequently secured below to two installed guides. After this, all the missing guides are mounted on the sheet.

The next step is to place corner piece in a vertical position. A sheet of drywall of the required size is inserted from the side.

Drywall sheets can absorb moisture, which leads to the appearance of fungus. However, working with them is quite easy, and these products are inexpensive. For example, a standard KNAUF sheet can be purchased for 215 rubles.

It is much more difficult to work with PVC, a material that is characterized by resistance to moisture and a long service life. The panels can have different colors; they do not require additional finishing. Of course, the cost of such products is much higher. One package contains ten sheets. With dimensions of 100x600x10 cm, its cost is 700 rubles.

They are quite high quality sandwich panels. They are characterized by moisture resistance and long-term heat retention. This is facilitated by one of the insulation materials included in the product:

• expanded polystyrene;
• polyurethane foam;
• mineral wool.

Price 1 per sq. m of sandwich panels with a thickness of 1 cm is 800 rubles.

How to arrange hatches

If you make an inspection window in the box, this will allow you to carry out preventive work, check meter readings and assess the condition of the pipes.

The plastic hatch can be made removable and equipped with a door. Conducting special preparatory work not required. In drywall construction knife a hole is made, the dimensions of which should be several millimeters larger than the dimensions of the hatch.

It can simply be inserted into the resulting opening or glued with liquid nails.

The viewing window can be a secret hatch. It forms a hidden opening that does not violate the aesthetics of the existing interior. Its design includes a metal frame with a door made of plasterboard. Its finish must match the wall covering.

Such hatches are often covered with wallpaper, sometimes even decorated with tiles. Installation of such a part is carried out before covering the box. The reason for this is simple: the hole frame is attached with self-tapping screws directly to steel frame hollow design.

First, the dimensions of the manhole cover are measured. Where it will be installed, it is necessary to create a frame from profiles, into which the prepared frame is subsequently inserted. This design is screwed with self-tapping screws to metal profile. It is important that two fasteners are placed on each side.

The hatch door must be one piece with the wall of the box. To do this, it is necessary that the sheet of drywall retreats from the edge of the opening along the entire perimeter by 10-12 mm. The resulting gaps between the frame and the frame are sealed with ordinary putty.

How to veneer a box

How to decorate drywall in the bathroom is up to everyone to decide for themselves. There are no restrictions here. To do this you can use:

• tiles;
• wallpaper;
• MDF panels.

To cover drywall with wallpaper, you first need to seal the heads of the screws, and then align the corners using special L-shaped elements. They can be made of metal or plastic. They are embedded in a layer of putty when the sheet of drywall is plastered.

When the surface dries well, it is rubbed and then primed. The next step is to start gluing the wallpaper.

To finish with tiles, no preliminary preparation not required. The surface of the box is covered with an even layer of special glue. It is placed on it tile and presses against the surface.

In the toilet, you can also cover the pipes with plastic panels. To do this, you need to install special guides for inserting all the parts.