How to connect the Internet on a wired computer. How to connect a laptop to the Internet via cable

Modern technologies There is an inspiring variety of access to the World Wide Web - these include wireless networks, fiber optic cables, 3G and 4G modems. Each type of Internet access has positive and negative characteristics, like cost, speed and stability. And the issue of connection complexity remains the same. Are they really necessary? additional services a specialist, or can everything be set up without assistants?

Preparing to set up an Internet connection

VPN connection, PPPOE, L2TP

PPPoE connection

If, when configured correctly, errors 651 occur, then the problem is related to the blocking or deactivation of the computer’s MAC address. To resolve the issue, you will have to contact support, describe the error and give the physical address.

Installing a home router

Is your home computer connected to the Internet via fiber optic cable directly? Is your recently purchased laptop completely cut off from the outside world? Ideal option– purchase a Wi-Fi router (router), configure the equipment yourself and provide the entire apartment with wireless access to the network, including a laptop, phone and tablet. The Internet fee will not change, everything is according to the tariff!

Search suitable place for the router. It is better to locate the source of uninterrupted Wi-Fi in the center working area to ensure a stable signal. It is important to ask optimal height and location - a smart choice will increase overall coverage.
Equipment. The Wi-Fi router, first of all, should be powered from an outlet. Next connect to router laptop with a wire with two plugs (in any slot marked either with numbers or LAN names), hidden in the box with the purchased equipment. And then plug the cable provided by your provider into the WAN connector.
Driver update. Any software must be installed in advance from the included disk.
Setup. The method for resetting information in the TCP/IP v.4 protocol is described above, but in short, in the protocol properties you need to set the automatic method for obtaining information about IP and DNS servers.

Setting up Wi-Fi on a laptop

- If the IP is automatic, then you won’t have to configure anything, just select the connection type in the main settings and correctly connect the router to the equipment.
- A PPPoE connection requires entering a login and password, and at the same time setting up a DNS zone. All information is issued by the provider upon conclusion of the contract, so you should carefully consider all documents issued.
- Static IP. Copied from settings local network and is recorded in the WAN settings.
- L2TP. All information is provided and filled in the appropriate fields.

An indicator in the wireless access panel will notify you of a correctly configured network. But it’s too early to start using Wi-Fi; the connection needs to be secured with a password and restricted from unwanted guests. WPA will do the job just fine. So, go to the router’s home page, the “Security” tab. First, select the security type, then the password. Save the entered settings, reboot the router, done!

Connect to an available Wi-Fi hotspot

Get free access to wireless internet can be found in almost any modern cafe, restaurant or shopping center. It is enough to activate the Wi-Fi module on your laptop, select a free connection and start surfing the pages of the World Wide Web. But how do things work in practice?

More information about activating the Wi-Fi module on various laptops:

HP. The F12 and Fn keys together enable the corresponding service. The Wi-Fi icon on your keyboard will change from a dull red to a brilliant blue.
ACER. The constant (regardless of the series) combination of Fn and F3 activates the connection menu and allows you to select the desired access point.
ASUS. Activation by simultaneously pressing Fn and F. The icon lights up and information about the connection pops up.
TOSHIBA. The buttons on the keyboard (Fn and F8) help; when the network is active, it opens access to the menu for selecting the future connection.
SAMSUNG. A typical use case for a combination of Fn and F. The control panel immediately opens.

If the function indicated in the list does not work, then you should first of all take a look at the keyboard. Find a key on the functional part that represents a network connection. Press in combination with Fn. Sometimes the activation method through special software installed with the drivers helps.

The second option for problems is uninstalled drivers for the network card or module WiFi. You will need to install the software from the disk included with the laptop, or using the modern DriverPack Solution utility, which automatically installs the missing drivers. You can also find the necessary files on the manufacturer’s website through a search; the main thing is to know the full name of the laptop.

A large list of advantages that modern laptops have over PCs, under some circumstances, can create difficulties in their everyday use. This reality can be confirmed by a situation in which the owner of a laptop, even though it has the function of connecting to wireless Internet, must still connect to a wired one. Thus, independently of us, a computer-laptop network is created, in which the laptop is used for permanent job, and the PC is only for the Internet. This fact creates the inconvenience of connecting a laptop via a network cable, so further we will consider in more detail the question of how to properly connect the Internet on a laptop via network cable?

So, how to connect correctly wired internet to the laptop in the manner described above. Connecting a laptop, namely an Internet cable to the LAN port of a network card, is one of the simplest and most obvious ways. After connecting the cable itself, you only need to configure the connections according to the requirements of the provider.

Next, you should understand in more detail how to connect the Internet on a laptop via cable. Having received the necessary settings from the provider, the user should take the following steps. Open the windows step by step: “Start”, then “Control Panel”, where you need to find the section called “Network and Internet”. In the window you should find an item called “Network Sharing Center...”, where you should find the item labeled “Change network settings.”

Here you need to select the section: “Setting up a connection, network”, where you need to click on “Connect to a workplace” > “Next”. In the pop-up window, select the section called “Use Internet connection” > “Next”, in the “Internet address” line that appears then indicate “vpn.internet.***.ru”, in the line the combination “***” means underneath is the name of the service provider obtained from the network administrator.

Enter the name of the VPN connection in the “Destination name” line, check the box next to the inscription “Do not connect now, perform connection setup...”, click “Next” > “Enter password and login” > “Create” > “Close”. After this, you need to click “Change adapter settings”, then in the window named “Network Sharing Center”, you need to right-click on the icon of the required VPN connection.

Select the “Properties” section in the menu that opens, in which, in all its tabs, select the required options. Then select the VPN connection icon, enter your username and password, and save it by selecting the appropriate button. Then click on “Connection”, after which mark in next window network type - “Public network”. This completes the connection procedure.

To increase the mobility of your laptop, you can install a Wi-Fi network using a Wi-Fi router and connect to it. In the Wi-Fi module router menu, you must select the necessary settings. A sign that the module is “working” is the glow of the corresponding diode on the laptop.

Wi-Fi router setup diagram: searching for available connections in the “Network connections, network management” menu: “Start” > “Connection” - find the network fixed in the router settings from the list - select it with the left mouse button, then click “Connect” and enter the code specified in the router settings. Thus, you can make sure that connecting a laptop using a Wi-Fi router is much easier.

A laptop has long ceased to be a luxury - it is a tool for work, relaxation and entertainment. Many have already appreciated and fallen in love with this wonderful device; for some, it has become a full-fledged replacement for a desktop PC.

If you connect your laptop to the Internet, it will be able to reveal its potential even more. And this makes me happy. Today we will look at several options for “how to connect a laptop to the Internet.” Are you ready? Let's begin.

Option 1. How to connect a laptop to the Internet using Wi-Fi.
This is one of the most simple ways connections. Most modern laptops are equipped with a Wi-Fi module. If you are in range Wi-Fi networks- connection can be made in the following way:

Turn on the Wi-Fi module on the laptop;
Go to Start/Connection, find and click Wireless network connection;
Select the network to which we want to connect;
Double click on the selected network - and we are connected. If the network is protected, you will need to enter a password (check with the administrator/owner of the network);
When a connection is established, you get full access to the Internet.

If there is no Wi-Fi module, it is possible to purchase and install a miniature USB Wi-Fi module that can become a full replacement for missing/non-functioning equipment on a laptop.

Option 2. How to connect a laptop to the Internet using a USB modem*.
Currently using " popular love» USB modems with which you can access the Internet. This access option is interesting if you have good coverage and adequate prices in the tariff plan. If you wish, you can find providers that provide mobile Internet complete with a 3G modem. Depending on your equipment and service provider, the connection procedure may vary.

In some cases, providers set up a connection in their area for free. service center, sometimes you can find special programs that automatically install hardware drivers, create a connection and configure Internet access settings. It is possible that you will have to connect and configure the USB modem yourself. How it usually happens:

Insert the SIM card into the USB modem;
Insert the USB modem into USB port on a laptop;
The system will detect a new device (you need to select a language during the installation process);
We agree to the License Agreement and the installation location of the program;
After installation is complete, click “Finish”;
The program will start automatically. If not, run in manual mode and enter the PIN code (written on the card for the SIM card);
The program is ready to use. Click “Connect with...”. After creating the connection, we can use the Internet.

*Connection diagram may vary depending on the equipment used and the ISP (service provider).

Option 3. How to connect a laptop to the Internet via a cable using a network card*.
Let's imagine that experts who are engaged in connecting subscribers have already come to you. They ran the cable, checked for connectivity and plugged the cable into the network card connector. All that remains is to configure:

Go to the Start menu, then select Control Panel;
Find and click there, select Local Area Connection and double-click on it with the left mouse button;
Then select and click Properties, in the list we need TCP/IP Protocol, then click Properties again;
Finally we reached our destination. If the provider provides automatic settings, select “Obtain automatically” for the IP and for the DNS server. Clicking OK will complete the network card settings. All settings are complete. Welcome to the world of the Internet.
**If your provider does NOT provide automatic settings, select “Use the following IP” and manually enter the IP, Mask and Default Gateway.
The next step is to register the primary and alternate addresses for the DNS server;
After clicking OK, the settings made are saved. The Internet connection will be made automatically when you turn on the laptop.

*Descriptions of settings may vary depending on your service provider.
** Please check with your ISP (service provider) for the information required for setting up your network card.

Ignore the apparent complexity of the connection settings. After you make the settings at least once, everything will fall into place. After several trial connections, you can easily set up Internet access not only for yourself, but also for all your “technically hopeless” friends. Congratulations: you now know three answers to tricky question“how to connect a laptop to the Internet.”

How to connect a laptop to the Internet?

Today, any computer is an integral part of our life. It is both a means of entertainment and a tool for work and learning. Of course, one of the most important elements a computer can be called the presence of the Internet in it.

Let's look at the main ways to connect a laptop to the Internet.

Ways to connect a laptop to the Internet

Today there are several ways to connect your device to the Internet:

USB modem.
Wired Ethernet network.
Wi-Fi.
Through a telephone line.

How to connect a laptop to the Internet via USB modem

First of all, it is worth noting that this is a fairly common technology. You can purchase such a modem in stores of mobile network providers.

You can take this modem with you all the time, since it is slightly larger in size than a flash drive. Thus, the Internet will be with you anywhere.

The modem operates using 3G technology. The speed of the Internet also depends on the provider, but it is much lower than, for example, the data transfer speed via Wi-Fi. There is no need for special drivers, installation disks or programs; the 3G modem has everything you need.

To connect 3G Internet:

connect the modem to any free port on your laptop;
wait while the computer searches for and connects new devices;
Autorun will open a window to perform the required actions. If the window does not open, go to the “My Computer” folder and double-click on the icon of the new device (modem);
install additional programs - the installation wizard will help with this, which will start when you open the modem installation file;
After installation, an icon will appear on the desktop, run the program;
click the "Connect" button;
you can use the Internet.

How to connect a laptop to a wired network

We can say about this connection that it is the most inconvenient, but the fastest. The disadvantage is that you are tied to one place. Therefore for such portable device as a laptop, it's not the best current method. But if you don’t need to leave your home or place of work with your laptop, then this connection is quite suitable.

The speed of the Internet in this case will depend on the provider and the package of services that it provides you.

To connect to the Internet, connect the cable to the laptop. The input for such a cable is indicated by the icon of three computers connected by one line. Further, the situation can develop in three directions:

you can immediately use the Internet without additional operations;
It may be necessary to register the IP address, DNS server and other settings for your computer;
You may need to create a separate VPN network connection and enter the data that your provider offers (login, password, etc.). To do this, follow the path: “Start-Control Panel-Network and Sharing Center-Set up a new connection or network-Connect to the Internet.” Next, enter all the data that the PC requests.

How to connect a laptop via Wi-Fi

This type of Internet connection is rightfully considered the most convenient, fast and comfortable. The disadvantages, again, include attachment to the place. But in this case, you can move in a certain area (depending on the router’s coverage area) and not be “on the wire”.

For this connection you will need a Wi-Fi router and a laptop. The connection procedure is as follows:

When you are within Wi-Fi range, check that your wireless network module (in your laptop) is connected. To do this, go to the Network Control Center and check if it is enabled. You can also enable it using the Fn + F3 key combination. You don’t have to worry about the presence of this module in your laptop - all modern laptops have a built-in wireless network module. Also check that the Wi-Fi router is turned on.
Next, after making sure that everything is connected, we search for available connections.
In the tray (in the lower right corner) you will find the monitor icon or communication bars (as in mobile phone). Click on the icon and see all the connections available for your laptop.
We connect to the router - find your router in the list of connections and enter its password.
Click the “Connect” button.

Internet connection via telephone line

This is very old way Internet connection, and its speed is very, very slow, but it can also be used. To do this, the laptop must have a built-in modem. And the quality of the connection depends on your telephone company (service provider).

Also, another important disadvantage is that the phone will be busy when using the Internet. You will need a wire to connect to the telephone socket. Everything will be connected in exactly the same way as with a standard connection using a modem, only here it is built into the computer, and the connection will be made directly via the computer-phone system.

To connect, you need to follow the path: Network Control Center - Setting up a new connection - Setting up a telephone connection - Create a remote access connection. We fill in all the necessary data and connect.

You may also find other articles useful.

In order to connect to wired Internet you need to do the following:

Go to “Start – Control Panel”.

Then “Network and Sharing Center”.

In the window that opens, find the item “Change network settings”.

In it, select the “Set up a new connection or network” section.

In the next step, you must choose how to connect, select “High-speed with PPPoE”.

On the page for setting up a new connection, you need to enter the information that your Internet provider should have provided you with, namely your login and access password. If the provider has provided you with such data, then you must enter this data in the appropriate fields. You can also specify the name of the new connection in the “Connection name” field. After this, you can try to connect to the Internet by clicking on the “Connect” button.

kompogolik.ru

Connecting a laptop to the Internet via cable

A laptop is often used as a home computer, resulting in the problem of accessing inexpensive Internet, which in addition has high speed, is relevant for him. These qualities today are more closely matched by an Ethernet connection, so below we will tell you how to make correct settings Internet on a laptop.

Ways to connect a laptop to the Internet

There are several ways to connect your laptop to wired Internet:

via a USB modem, which is convenient, for example, in the country, but such a connection often does not provide sufficient speed and usually costs more;
using Wi-Fi if there is an access point, for example, when a Wi-Fi router can be connected to a desktop computer with the Internet;
This can be done via a wired Ethernet network, which provides the highest speed, connection to which will be discussed later.

Cable Internet for a laptop is the fastest, but also the most inconvenient, since in fact it can turn a mobile computer into a stationary one. At the dacha, for example, it is better to turn on a simple USB modem. A Wi-Fi router is very useful for use in an apartment.

Preparing for cable internet connection

To set up an Ethernet connection, first connect the network cable to your laptop. You can also connect a router to it, which, after configuration, will be able to distribute Wi-Fi to any other devices, providing fairly decent speed.

Wire " twisted pair» is laid from the switch in the entrance to the place where you plan to make an access point to the Network. Special tool A plug with an RJ-45 connector is mounted on the cable, which must be plugged into the corresponding socket on the panel on the side of your laptop.

Connecting to the Network will not be possible without the necessary drivers for the network card. To check that they are installed correctly, do the following:

windows XP. Go to the control panel by clicking “Start”, select the network connections section.
For windows 7 and older versions. Go from the control window to the network and sharing settings section, then select the option to change settings for the adapter.

If the window that opens is empty, the driver is probably not installed.

General rules for connecting high-speed Internet

The data required for connection is indicated in special agreement. If you want to turn on the router, you will need to make other settings described in the specifications for the device. If automatic network detection does not occur, you will have to configure the TCP/IP protocol yourself.

In Windows 7 and 8, the connection is made in the following order:

In Windows 10, the connection is made as follows:

From the Settings section of the Start menu, go to Network and Internet.
Next, you will need to open the adapter settings settings.
Next, follow all steps, starting from step 3, described for Windows 7 and 8 systems.

No further actions are required - the connection should work at full speed automatically. If you connect via a router, the procedure may vary for different providers, so to set up the Internet, first find out the full information on the corporate website of the provider providing this service.

Alternative Internet for a summer residence

Please note that in a dacha where it is not possible to connect to the Internet via cable, optimal choice will use a USB modem. As a rule, there are no problems connecting it:

Insert a SIM card into the modem, then connect the device to the laptop;
The system will detect a new device and offer to install a program that allows you to use a modem on your device;
You may then have to enter the PIN code indicated on the card, after which the modem will automatically connect the laptop to the Internet.

In a word, you can connect to the Internet, which would have high speed even in the country, through a cable or router, and the procedure for setting up the connection can sometimes differ slightly.

LookForNotebook.ru

How to properly connect wired Internet to a laptop

Nowadays it is already difficult to find the owner of a laptop that is not connected to the Internet. Despite the increasing development and spread of communications via Wi-Fi connections, access to the Internet via cable attracts with its undeniable advantages, since it is more reliable and at the same time the lowest cost. Below are detailed guides about how to properly connect a stable wired Internet to your laptop, as well as how to set it up for subsequent work.

Connection procedure

There are 2 connection types:

Wirelessly
Via a network cable.

The settings process after connecting via a network cable varies slightly depending on Windows versions operating on a PC. But the procedure itself is very simple, since you only need to insert the cord from the provider into the socket of the laptop’s network card. All laptops have a connector on the side of the case.

You need to install a wire coming from the distribution device installed in the house into the connector.

Preliminary activities

But if the user has a question about how to connect the Internet to a laptop, then first they need to decide on the choice of provider. To do this, it is recommended to analyze the following conditions:

Possibility of cable connection to the system of the communication service provider;
Price for services provided;
Providing by the provider a data transfer speed that is acceptable to the subscriber’s requirements at an optimal cost;
Availability and speed of response of the provider’s technical support service;
Additional criteria(promotions, special discounts, etc.).

Next, in order to connect to the wired Internet, you need to fill out an application on the official resource of the selected provider or by phone. Also, if possible, it is recommended to simply personally visit a nearby office of the communication service provider to draw up an agreement.

Setup procedure

Simply connecting the PC to the cable is not enough, because you also need to set up the Internet. First, let's take a step-by-step look at the entire setup process using the example of a laptop with Windows 7 installed.

Windows XP

In the case when a user solves the problem of how to connect a laptop to the Internet on which good old Windows XP is installed, then only a few steps should be taken:

Through “Start” open “Control Panel”;
Next, go to the “Network Connections” section;
Then right-click on “Local Network Connection”, click on the “Properties” line;
Click once on the line “Internet Protocol (TCP/IP)” and then click “Properties”;
Next, in the window that appears, select the “Use the following IP” item, indicate the data specified in the subscriber’s agreement with the provider;
Ready! Internet configured.

Windows 8

The following sequential steps must be performed:

Log in to the “Control Panel”;
Go to the “Network and Internet” section;
Next, open “Network and Sharing Center”;
Check the box “Set up a new connection.” or networks";
Specify the “Internet Connection” section, click “Next”;
Then it is recommended to install “High-speed (with PPPoE)”;
Type the name and access code specified in the agreement with the service provider, and check the “Remember this password” option;
Click “Connect”.

Note: after entering the parameters, sometimes for correct operation you need to restart the laptop.

nastrojkin.ru

How to set up an Internet connection on Windows 7

A computer or laptop running Windows 7, of course, can work without Internet access, but it functionality in this case they will not be used to their full capacity. In addition, the World Wide Web in its current state– the main supplier of information, software, entertainment content, etc. Therefore, the question of how to set up the Internet on Windows 7 requires a comprehensive analysis and successful resolution.

Preparatory stage

Before you start creating an Internet connection, make sure your computer has all the necessary software and hardware.

Connect the network card if it is not integrated into the motherboard or is not previously installed as an extension. The same applies to other devices through which you want to establish a connection to the Internet (USB modem, router, etc.).
Install drivers for the connected equipment. Without software, devices will not work correctly. Drivers are usually supplied on a disk, but if there is no media, they can be found on the official website of the manufacturer of your network equipment.

Connection setup

The instructions below will cover the wired connection. If you want to create a wireless network at home, find out how to connect a router and configure its operating parameters correctly.

Be careful! The system will offer you several connection types and you will have to choose the right one depending on the type of equipment you are using.

When using a 3G modem, you usually do not need to create a new connection, since all the necessary software is installed automatically when you connect a network device to the USB port.

If you use wired Internet, which is delivered via a cable laid by your provider in your apartment, select the first type - “Internet Connection”.

In the next window, the wizard will ask you to choose which technology the connection will be used. Click on the "High Speed (with PPPoE)" button. Below it says that for identification you will need the login and password provided to you by your provider. This data must be entered in the next window.

The name of the new connection is also indicated here, which can be anything.

If you specified everything correctly, the following window will appear on the screen:

Network card settings

In some cases, providers require users to specify the IP address and DNS server address in the connection properties. To meet these requirements:

If you see error message No. 651 when trying to connect to the Internet, check that the network card drivers are installed correctly.

Create a connection shortcut

The connection has been created and now you can use it to access the Internet or, for example, connect a remote desktop. Now, for convenience, let’s place a shortcut to the created connection on the desktop, so that immediately upon logging in you can connect to the Internet without launching the “Control Panel”.

A shortcut to your connection is available on your desktop - you can use it to access the World Wide Web.

mysettings.ru

How to connect wired Internet to a laptop?

In total, there are only two options for connecting to the global Internet network to your laptop: wireless method and via a network cable. Moreover, one procedure is very different from another based on the OS version. Now we will learn how to connect wired Internet to a laptop.

Let's start setting up

Before you start setting up, you must make sure that the network cable has been connected to the computer, the network card has all the necessary drivers, and the Internet provider has started providing Internet service.

Using the example of one of the most popular operating systems Windows 7, the principle of connecting to the Internet will be considered. So, in order to become a member of the “global web”, you need to do the following:

The user should go to the “Control Panel”. This transition can be done from the Start menu.

We find the point that is responsible for global network and we enter it. Even on different versions of operating systems, this item looks approximately the same.