It’s not at all difficult to make a beautiful three-dimensional paper tree. Follow the instructions, use the template provided, and you will have a branchy, lush crown, a real gorgeous tree.

Materials for work:

• 4 sheets of brown cardboard;
• 1-2 sheets of green colored paper;
• A simple pencil, scissors, glue stick.

How to make a three-dimensional tree out of paper?

Download the template from the link or draw any tree with branches in the area of ​​roots and crown. It is important that both sides of the tree are completely symmetrical. Therefore, if you decide to draw own version tree, fold the paper in half, draw one part of the tree, cut it out and you will get absolutely identical sides.

Cut out 4 blanks according to the template from brown cardboard.

Fold each one in half exactly in the middle.

And then begin assembling the plant into a single whole. To do this, first glue 2 blanks in the area of ​​the bent halves, and then two more. You need to glue everything, both branches and roots, but for now only use one bent half.

You will now have almost a tree, even two. But the work is not finished here, because we need a lush and voluminous paper tree.

Therefore, glue both parts together in the area of ​​the remaining sides.

The result is a fairly dense and very stable tree. It is a little gloomy, but, in principle, like all trees without leaves. But this can be fixed.

Draw a small leaf of the desired shape. It can be oblong, round, absolutely anything. You might prefer to do autumn tree, and for this, replace the green paper with yellow and orange. Fold the paper from which you will cut the leaves into an accordion, and then double this accordion, and cut out many leaves at once.

Glue them to the tree, on each branch, wherever there are large voids, to create a lush and spreading crown. Volumetric tree paper is ready.

Trial lesson on layout http://bestmaket3.ru/ochnoe-obuchenie...
In this video we will show you how to make trees, bushes and flower beds for your layout. There are several options for making bushes and trees, which are mastered by the guys undergoing training in the prototyping studio. The simplest, and therefore often used, is the production of trees from stranded copper wire. The thickness of the wire, that is, the cross-section, is selected according to the thickness of the trunk of the trees depicted.
Then the wire splits into separate branches. Then, on a suitable piece of foam plastic, this could be a piece of plasticine fixed to something, into which we inserted the trunks of trees and bushes, we paint them in brown colors.
It is advisable to seal the paint with a layer of varnish. Even simple hairspray will do. Next, the branches are coated with glue. Anyone will do, with whom you have already worked. It could be Uranus, Cosmofen, or PVA. You just need to take into account the drying speed of this or that glue.
The foliage used for gluing trees and shrubs can be either purchased, from ready-made kits, or homemade.
For homemade, a regular sponge works well. It is painted in various tones green shades are quite chaotic and disorderly.
After drying, knead the sponge either with your hands, or in a blender until it becomes small pieces, but not into dust. Then the trunks of trees and shrubs, coated with glue, are sprinkled with finished foliage.
If fall foliage is desired, more yellows and reds are added to the paint. Making models with your own hands is an interesting and creative process. Watch our lessons, take a full video course or an intensive course and you will succeed! http://bestmaket3.ru/

Layout lessons. Making trees, bushes, flower beds -

Hello dear craftswomen! Today I present to you how to make tree models with your own hands. I never thought that I would have to do this. The fact is that such trees were ordered for me by my dad, who makes models of Temples and churches. I promised to promise, but I don’t know how to do it! But the promise is made - it must be fulfilled. I found the video and got to work. The video on which I made my trees can be viewed here - http://yandex.ru/video/search?filmId=1IwlFm7AUXI&text=%D0%BC%D0%B0%D0%BA... . I decided to show you how I made them, especially since very often either at school or in kindergarten They ask you to make some kind of craft on a particular topic, and then my MK and the author’s video will certainly help you in this matter.

This is the tree and I got a few more. I’ll be honest: I didn’t think that making trees would be so exciting. Dad asked for two trees, I got carried away and made 4.

For work we will need: fine wire, a sponge for washing dishes or ordinary foam rubber, any lid or cardboard on which we will wind our wire, pliers that are usually used in beading and green paint of different shades.

We wind the wire around the lid. For one tree, approximately 8-10 m high, one coil is enough. But if you want a thicker trunk and a more branchy tree, then you can use more wire. Having wound the wire in this way, cut it at one end.

Let's straighten it out.

Below we leave a centimeter and a half - two for the roots. They will continue to serve as a stand for our tree.

At the bottom we straightened the roots, twisting several wires into one. Next, we begin to form our crown, starting with the lower branches. To do this, separate 6-7 wires from the clouds and twist them in a spiral until about halfway. Next, we divide our wires in half and continue to twist them separately.

Then on each branch we leave one alone, and then twist two at a time. This is how it is shown in the photo.

Using the same principle, we make 3-4 more lower branches.

So that the branches of the second tier do not come into contact with the branches of the lower tier, we scroll the trunk up a little more.

We make a second tier of branches, scroll the trunk again and form the top in the same way as we did the rest of the branches. This is what we should get.

And this is the skeleton of the future birch tree.

Here is our tree completely covered with PVA glue (as if covered with snow. We leave our tree until completely dry, for about 2-3 hours. As soon as our tree is completely dry, we begin to paint it. Unfortunately, I didn’t take a photo of the painting process, but you can see it in the video there is nothing complicated here. We paint the trunk and branches either with brown acrylic, or, if it is birch, with light gray with black dots.

Next we paint our future crown. For this purpose, I took a dishwashing sponge and plain white foam. I poured some water into a bowl and added some acrylic paint in different shades. I squashed it in water so that the sponge colored evenly.

She wet the sponge again and, without squeezing it out, began applying paint to the sponge with a brush: first with one shade, then with another, then with a third. It is enough to apply a little paint on one side.

And then just squeeze it in your hand, putting a glove or plastic on your hand. The sponge, as you can see, is colored unevenly, which is what we need. Since the sponge was yellow, this gave us an additional shade of yellow. This is what we got.

We squeeze out excess water from our sponge and place it on the battery until completely dry.

And this shade was obtained by dyeing ordinary white foam rubber. As you can see, this one is greener. The first, lighter sponge was used as foliage for the birch tree.

dipped in crumbs. And so on every branch. Then she let it dry, shook off what didn’t stick. Then she applied glue to the branches again, but not with a brush, but simply dripped drops from the bottle and added little by little crumbs and again until completely dry. And so on several times. This is of course more troublesome, so it is better to do as the author advises.

The scenery is an important detail of the model railway. They can be purchased at the store or made by yourself. The big advantage of DIY crafts is realism, as well as savings. cash. In addition to the trees themselves, a complete landscape requires some shrubs and grass. To make them, you need to prepare the necessary material in advance. Of course, all this can be purchased at a specialized store, but if the model of the railway is large-scale and the number of trees exceeds 100, purchasing them can cost a pretty penny. Moreover, most of the goods presented in the store are distinguished by artificiality, which attracts attention at first sight. Considering all of the above, you can purchase several trees to later compare them with the products self-made and feel the difference with a specific example, for our part we will try to make your work as easy as possible by offering detailed instructions. It's just a matter of starting!

Railway will go through a dense forest, so in total we will need 200 - 300 trees. The layout assumes the presence of mountains, so most specimens will be conifers.

After reading the below step by step description, you can easily make an artificial tree and you will find that it is very, very simple to do. However, given the fact that we have to create an entire forest, we need to prepare in advance for the fact that the procedure will take a lot of time.

First, we need to decide on the dimensions, using real trees as samples. Given that the scale is 1:87, the length of the tallest tree will be 30 cm, and the shortest 8 cm. In addition, it will be useful to make several stumps to give our forest realistic features.

Required materials:

• Round blanks for tree trunks, thickness 1.5 – 0.8 – 0.5 cm.
• Wire nails, 3 mm thick.
• A skein of green or galvanized knitting wire.
• Glue and a brush for its careful application.
• Latex paint mixed with sand and fine cork material.
• Water.
• Brown acrylic paint(or a bottle of pigment to add to latex paint).
• Pool filter material (available at every garden center).
• Wood glue, diluted with water.
• Acrylic paint.
• Spray - glue.
• Green fibers.
• Alcohol or gasoline to clean the glue from the barrel, as well as a cotton swab.
• Airbrush gun and compressor.

Required tools:

• Set of steel knives.
• Sandpaper.
• Ticks.
• Peripheral cutter.
• Tool for applying glue.
• Scissors.
• A tool for chopping wood.
• Brush.

Step 1.

First of all, rods of the required length are prepared for tree trunks. With the help of a steel knife they are very easy to do, since balsa wood is a very soft material. Then using sandpaper the rods are given conical shape, and the remaining dust may be useful later, so it must be saved.

Step 2.

In the second stage, using Carpenter pliers, cut the wire nails into pieces required sizes, after which they are inserted into the wooden blank, and glue is poured into the resulting gap.

Step 3.

We cut the knitting wire into several lengths from 4 to 10 cm. They will serve as the basis for branches, as well as small trees and bushes.

Step 4.

We adjust the branches so that they are the same length on all sides. We start with the lower branches, for which we take the longest 10 cm segments. A little higher we make another row of smaller segments, etc. We also crown the crown with a piece of wire.

Step 5.

At the fifth stage, the branches are fixed with glue. Here you can use special samples or use super glue.

Step 6.

At this stage, we are faced with the task of producing a mixture of clay, water, paint, pigment and sawdust. Here you can also use a latex mixture of brown or black color, mixed with sand and sawdust (remaining from us after the production of wooden trunks at the first stage). Shake the resulting solution thoroughly with a wooden stick until thick. The most important thing is that the mixture is not liquid.

Step 7

Using a brush, apply the resulting mixture to the trunk and branches and let it dry; if necessary, apply several layers.

Step 8

Using scissors, make small strips of fibrous material, and then using wood glue we put them on the branches and let them dry thoroughly.

Step 9

After the workpiece has dried, we use an aerosol to apply dark green or brown paint to the wood.

Step 10

At this stage, a layer of glue is applied to the fibers, but it is advisable to avoid getting it on the tree trunk. Considering that some of the material is more liquid, it should be carefully scattered over the entire area of ​​the branch. After this, the tree is given a few minutes to dry, and then using a cotton swab, alcohol or gasoline, it is necessary to remove glue and fibers from the trunk, since needles do not grow on it.

Now the tree can be used as decoration. Considering that a living forest is distinguished by its richness of form and content, it is advisable to paint the trees in different shades to avoid monotony.

It would be useful to create small details, for example, broken branches, dead wood, so that the work looks natural.

Alternative design.

This technique assumes that the branches are located exclusively on the upper part of the tree, by analogy with pine forests. To do this, several pieces of wire are attached to the barrel, which takes a little time. The branches are fixed using quick-acting glue.

Bark paste is made from latex paint with the addition of brown and black pigment, as well as sand and sawdust remaining after the production of the cone. This allows the tree to look naturally, resembling specimens of the wild.

The next step, as in the first case, is attaching the fibrous material and painting it in green. In this case, the pine should be larger than the spruce, so that the length of the trunks will reach 25 cm.

Trees, bushes and flower beds can be crafted in different ways. We will tell you about one of them.

This option is the simplest and therefore more often used. The trees are made from stranded copper wire.
The thickness of the wire must be selected so that it matches the thickness of the trunk of future trees.
The next step is to separate the wire into separate branches.

Next, you need to take a suitable piece of polystyrene foam and paint them brown (or any other color, depending on the task).
It will be good if you fix the paint with a layer of varnish, you can even use simple hairspray.

After the paint has dried, you need to coat it with glue. You can use Uranium, Cosmofen, PVA or any other. with whom you have already worked. Here you need to take into account the drying speed of a particular glue.

You can buy foliage for covering trees or shrubs or make it yourself.
You can make your own foliage from an ordinary sponge. To do this, you need to paint the sponge in different shades of green. To make the foliage look natural, you need to paint it chaotically and haphazardly. When painting, water-soluble paints are used.

When the paint dries, you can knead the sponge with your hands, or even in a blender. The main thing is not to overdo it and not grind it into dust.
Now all that remains is to coat the trunks of trees and shrubs with glue and sprinkle with the prepared foliage.

If we want to show autumn, we color our foliage in more red and yellow tones. If we are making a winter layout, we can glue cotton wool and also sprinkle it with soda or semolina.
The article was prepared by the center’s specialists