Ceiling plinths are very often used for decorating rooms. They give the ceiling a complete look and allow you to convey a particular style in the interior. In addition, they serve to mask the joints between the walls and the ceiling, where the two join various materials. Although such elements are not always present in the premises, they make the interior more complete. In the material below, we will describe in detail how to cut the corner of a ceiling plinth, since in such places the joining of individual elements often poses a problem for inexperienced builders.

If the room has simple form, then only the internal corners will need to be cut. But in rooms of a more complex configuration, with columns, partitions and niches, there will also be external corners. In order for decorative elements to look beautiful, trimming must be done correctly and carefully, otherwise the appearance of the ceiling will be ruined.

To cut the ceiling plinth in the corners as best as possible, you can use high-quality and sharp tools or other means. The type of tool that will be used to cut skirting boards depends on the type of material they are made from. Thus, ceiling plinths are made from PVC, polystyrene foam, polyurethane and wood.

Most cheap option– these are PVC skirting boards. They are soft, so it is easy to leave dents and creases on them that cannot be corrected in any way. In addition, this material has the property of attracting dust. A hacksaw or sharp knife is suitable for cutting such skirting boards.

Another fairly cheap type of material is polystyrene foam skirting boards. They crumble easily, so to cut the corners of the ceiling plinth you should only use a sharp knife or a hacksaw. Movements should be soft, without pressure.

Cutting plinths to decorate the ceiling

Another type of ceiling plinths is made from extruded polystyrene foam. They are much denser than ordinary foam plastic products (therefore they do not crumble), they cost a little more, but they are also somewhat more difficult to cut. For work, you can use the same knife or hacksaw for metal.

The most expensive skirting boards are made from polyurethane. These are elastic, strong and moisture-resistant products that are very easy to cut construction knife. True, they cannot be used in all rooms, since polyurethane is sensitive to high temperatures– it becomes deformed, begins to crack or crack.

To work with wooden baseboards, only a hacksaw with fine teeth is suitable; you can use a metal tool.

However, many novice craftsmen are interested not so much in what, but in how to correctly cut the ceiling plinth in the corners. This process requires careful calculations and accuracy from the performer. In some cases, if the interior of the room allows, you don’t have to think about how to cut a corner on ceiling plinth, but use ready-made corner elements. They can be purchased at construction stores. In this case, the plinth is simply cut straight and inserted into the corner element. All irregularities and flaws will be hidden.

Using a miter box to cut baseboards

In carpentry, a special device made of wood, metal or plastic is often used - a miter box. There are special slots made in it that allow you to make an even cut at 90º, 45º, and in more complex devices – also at 60º. There are also professional miter boxes equipped with a rotating mechanism. In them, the cutting tool can be installed and fixed at any angle to the workpiece. Before you make a ceiling plinth in the corners, you need to understand the details.

To cut internal corner ceiling plinth using a miter box, you must:

• First, you need to attach the baseboard blank to the ceiling surface and mark the length.
• Now the piece of plinth is placed in the miter box in the same position as it should be placed on the ceiling.
• The plinth is pressed tightly against back wall miter box.
• Hold the workpiece with one hand so that it does not move during cutting.
• The hacksaw is installed at an angle of 45º to the workpiece.
• Cut the plinth, controlling the degree of pressure of the hacksaw so as not to damage the product.
• Then they move on to cutting the counter piece of plinth. It is also applied to the far wall of the miter box.
• The workpiece is pressed and held by hand so that it does not move.
• The hacksaw is installed at an angle of 45º to the workpiece so that the cutting direction is opposite to the first element of the plinth.
• Cut off the corner of the plinth.

After trimming the ceiling plinths in the corners, they proceed to joining the resulting elements. If the cutting was done accurately, they will fit tightly together.

Let's look at how to cut external corner ceiling plinth using a miter box:

• It is best to start marking and measuring the ceiling plinth from the inner corner, and only after completing it, start cutting the outer corner. Otherwise, the plank may be short and not enough to fill the entire length of the ceiling.
• The plinth is applied to the ceiling and its length is marked.
• Then the workpiece is placed in a miter box and pressed against the front wall.
• The hacksaw is placed at an angle of 45º and, holding the workpiece with your hand, the corner is sawed off.
• Similarly, it is necessary to cut off the opposite part of the outer corner.
• The workpiece is pressed to the front of the miter box.
• The hacksaw is placed at an angle of 45º to the baseboard and the workpiece is sawed off.

Upon completion of the work, the pieces of plinth are joined together, checking that everything is done correctly and evenly.

Marking on the ceiling to make a corner on the plinth

There are different ways to properly make a corner on a ceiling plinth. Some are easier to do, others are more difficult. One of these methods is to mark the baseboard on the ceiling. True, cutting a plinth by weight is not very convenient, but it’s accurate this method not inferior to everyone else. Before cutting the plinth for the ceiling, it is applied to the surface, while all the imperfections and unevenness of the walls, as well as the size of the corners, are immediately taken into account.

Let's take a closer look at how to correctly make corners on ceiling plinths using this technique:

• First, the two mating plinth strips must be cut at an angle of 90º;
• One of the blanks is pressed against the wall, and its end is pressed against the opposite wall. Then the outline of the workpiece is drawn on the ceiling.
• At the next stage, take the second plank and press its end against the wall in the same way. Draw a line.
• At the intersection of the resulting lines, a point is placed at which further trimming of the skirting boards will be carried out.
• Then each of the planks is applied to the ceiling in turn and the cutting point is transferred to the workpiece.
• From this point, a diagonal cutting line is drawn into the corner of the plinth.

It is worth noting that this method More often used for internal corners.

Applying a miter box template

To cut the plinth in the corner of the ceiling as evenly as possible, you can use a paper, cardboard or wooden template instead of a regular miter box. Two parallel lines are drawn on it, then the central point is found and any necessary angle is laid off from it using a protractor. Before cutting the corner of the ceiling plinth without a miter box, it is worth double-checking the size of the internal or external angles between the walls of the room, using the same protractor.

The principle of cutting corners using a template is similar to using a standard miter box. In this case, the workpiece must be pressed against a parallel line and, setting the hacksaw at the desired angle, saw off the workpiece.

How to make a miter box yourself

Often the only way to evenly cut the corner of a ceiling plinth is to use special devices so that the tool does not move to the side during the cutting process. In this case, you can make a miter box yourself.

Option 1. A box in the shape of the letter P is made from three boards. The required corners are marked on the walls of the box and slots are cut in the appropriate places. The result is a complete device.

Option 2. Sometimes it is quite difficult to make the corners on the skirting boards on the ceiling as even as possible, especially if you have to hold the workpiece in weight. In this case, you can use homemade device. Take two boards and knock them down into a corner shape. Then lines with the required angles are drawn on a sheet of paper or cardboard and the template is applied to the corner. Then press the plinth, place the template under the cutting area and saw off the corner along the lines.

Option 3. If you are still in doubt about how to properly cut the corner of the plinth, almost anyone can help with this household item, the shape of which allows you to form an angle. This could be a chair or a table, simply placed close to the wall.

To understand how to properly cut a ceiling plinth, you should also familiarize yourself with the rule for measuring workpieces. So, to make an internal corner, the length begins to be measured directly from the beginning of the corner. But to determine the external corner, it is worth considering that it will protrude into the space of the room by the width of the product.

There is no need to rush and fix the workpieces before the mating plinths in the corner have been completed. In order not to redo the work, you must first make sure that the joining surfaces fit tightly to each other and to the ceiling. Small defects can be corrected with a file, thin nail file or knife, depending on the material of the product.

If cutting the skirting boards in the corners did not work out perfectly, small cracks can simply be filled with putty. In general, the process of cutting skirting boards at the corners is not at all difficult. However, for practice, you can take several small pieces of baseboard and practice on them.

How to cut corners of ceiling plinths. Photo 1

Probably everyone who has ever carried out repair work with their own hands has encountered the problem of cutting out the outer and inner corners of a ceiling plinth. Ceiling plinth, also called fillet, is used in renovations to hide the uneven boundary between the wall and the ceiling and give the interior completeness. How to cut a corner of a ceiling plinth without a miter box? We'll talk about this in our article.

How to cut ceiling plinths in corners without a miter box? If you don't have a miter box on hand, it doesn't matter. You can cut out the outer and inner corners without a miter box.

Today there are fillets on the market different sizes, shapes and colors, with and without relief patterns. The material from which they are made is also different. These are mainly: polyurethane, expanded polystyrene, polystyrene and polyvinyl chloride. But lately the most popular in repair work became a wooden ceiling plinth. Its aesthetic appearance allows you to add elegance and rigor to the design of the room.

Which skirting board is better?

Before you can correctly cut the corners on the ceiling plinth, you need to select it correctly.

Advice: The ceiling plinth will look harmonious if its width is chosen correctly. The higher the walls, the wider the baseboard should be.

The most durable, moisture-resistant and elastic are polyurethane fillets and cutting a corner from such a ceiling plinth is not very easy. However, all these positive qualities are overshadowed by one significant drawback - they cannot withstand sudden temperature changes, which does not allow them to be used in all rooms.

For example, in a kitchen where there is gas or electric stove, polyurethane fillets will retain their original appearance for about a week. After this, with frequent cooking, when hot air will either rise to the ceiling or fall, they will begin to deform, spoiling the whole “picture”.

Skirting boards made from other materials also have their disadvantages.

For example, products made of polyvinyl chloride have increased electrostaticity and if dents appear on their surface during operation, it will be impossible to remove them. At the slightest mechanical impact, ceiling plinths made of expanded polystyrene and polystyrene break.

If we talk about which ceiling plinth for suspended or ordinary ceilings is better, then it’s probably not possible to give an exact answer here. Since each of them has its own positive and negative qualities. Therefore, you still have to make a choice, based on the financial resources you have and on the conditions under which the fillet will be used.

How to cut corners without a miter box?

At first glance it seems that do not cut off the corner of the ceiling plinthdifficult - I cut the edges of the baseboards at an angle of 45 degrees and glued them. However, this is absolutely not true. Each corner of the room may differ in its parameters, for example, one is 90 degrees, another is 88 or 92.

This difference is normal, especially in buildings that are more than 30 years old. Therefore, if you simply cut the baseboard at an angle of 45 degrees and glue it at the border between the ceiling and the wall, a gap may form that should not exist. How to join the ceiling plinth so that there are no gaps? So let's begin.

First you need to prepare a tool that will be used to trim the edges of the skirting boards. This could be a metal saw or a regular sharp knife.

How to cut the inner corner of a ceiling plinth without a miter box? The answer lies below the surface.

Step 1. Take the baseboard and place it on the corner in the same way as you will glue it. Using a pencil, draw a line on the ceiling along the baseboard. Remove the fillet.

Step 2. Place the second plinth on the other side of the corner where it meets the first. Follow the same procedure as with the first one. As a result, you should have markup.

Step 3. Take the plinth, lean it firmly against the place where you will glue it, and transfer to it the point of contact of the two straight lines drawn earlier on the ceiling. From this point, draw a line to the opposite edge of the baseboard. This line will be the cut point.

Step 4. Do the same procedure with the second baseboard.

Step 5. Cut the edges of the baseboards along the marked line.

Step 6. Place the cut baseboards against the corner. If the place where they meet has no gaps, you can start gluing the fillet. If there are gaps or irregularities, adjust the cut corners with a knife.

How to cut the outer corner of a ceiling plinth? When creating an outside corner upper part should protrude above the lower one, the inner one - everything is the other way around.

Whatever ceiling you glue the plinth to, be it the ceiling in the bedroom or kitchen, do not rush, measure everything carefully. This will help you avoid damage to the material.

Since the vast majority of rooms are rectangular, when installing skirting boards, right angles of the walls (90 degrees) are formed. It is necessary to cut the plinths at an angle of 45 degrees so that when joining 2 ceiling plinths, a right angle is formed.

Important! The slope of the line will be different depending on whether we are making an internal or external angle.

If you cut the ceiling plinth correctly, you will get an ideal corner without gaps when joining.

How to cut the corners of a ceiling plinth using a miter box

It is quite difficult to make an even cut for a corner by eye. We simplify the task and use a miter box (you can buy it at any hardware store).

The ceiling plinth is cut using a hacksaw. The cutting should be done very carefully. Do not put too much pressure on the hacksaw to avoid chipping.

Important! At uneven walls For better joining in the corners, a shorter plinth is suitable. With a short plinth it is easier to achieve a corner without gaps; it will not be deformed as much due to unevenness as a long plinth.

How to join skirting boards at arbitrary angles

If your walls do not form a right angle, then cutting should be done without the help of a miter box.

It is necessary to cut the ceiling plinths with a stationery knife. In general, you can use any sufficiently sharp knife. Even a kitchen one will do, but it must be very well sharpened and have a thin blade.

We will measure our cuts directly along the corner on the wall. We will need to make marks on the wall, so it's worth stocking up on a pencil.

If, when joining, the parts do not fit together enough, a more careful adjustment is needed. This can be done by trimming the baseboard with a utility knife; you can also trim the edges sandpaper.

Advice! If you can't fit the joint perfectly, don't worry. The gaps can be filled with sealant or putty.

Upon completion of any repair, installation of ceiling and floor skirting boards is usually the finishing touch. And while gluing a plinth plank onto a straight section of the wall is not difficult, many people often have problems with how to decorate a corner with a ceiling plinth.

In fact, modern polyurethane and polystyrene foam skirting boards are easy to join into corners, since they are easy to process and quite light in weight (see).

Let's figure out how to glue the inner corner using a ceiling plinth, as well as the outer one, so that it does not look foreign against the background of the overall beauty of the renovation.

Features and methods of forming the corners of ceiling plinths

You need to understand that corners in rooms are not only internal, but also external, which, in fact, is the main difficulty of our task.

However, the problem is completely solvable and can be solved in several ways.:

• Firstly, it is possible to avoid cutting the material altogether by purchasing special fittings. Corner elements for ceiling plinths they are both internal and external corners attached to the corners of the room. The ends of the outer skirting strips are inserted into this corner for the plinth.. This option is the simplest and does not require any special skills.

• Well, the second option is to trim the edges of the baseboards at a certain angle, which will ensure a tight and even fit of the baseboard strips to each other. Cutting, in turn, can be carried out in two ways:

1. using a special template tool called a miter box;
2. manually according to markings made using a certain method.

Performing an angle using a miter box

Such carpentry tool, like a miter box, is specially designed for cutting various materials that are planned to be subsequently mounted at right angles. Its design or rather appearance may be different, but the principle remains the same.

There are variations of the tool with the ability to manually adjust the cutting angle, but the simplest miter box looks like a wooden tray with vertical slots in the walls to allow insertion of a hacksaw (see a). It allows you to perform vertical cutting at an angle of 45 or 90 degrees. If you wish, you can make something similar to such a tool yourself.

There is also a more complex tool with which you can make a corner of the ceiling plinth. It is presented in the form of a plastic tray with similar slots in the side walls for a hacksaw, but, in addition to angles of 45 and 90 degrees, there is also a slot of 60 degrees, as well as the possibility of not only vertical cutting of the material, but also with an inclination of the hacksaw blade of 45 degrees.

As for professionals, they usually use a miter box with a rotating mechanism, which allows them to fix the hacksaw at almost any angle relative to the workpiece (see). If the first two types of tools are suitable only in cases where there are even angles in the room (90 degrees), then the third is effective regardless of the size of the angles.

Instructions for cutting skirting boards for arranging a corner

How to make corners on the baseboard using a miter box when there are right angles in the room?

Simple enough:

1. To do this, first insert one strip of plinth into the miter box, insert a hacksaw into the holes in the cutting tool at an angle of 45 degrees and make the cut.
2. Then a second strip is inserted into the miter box to be joined to the first one, and in the same way, only using opposite holes in the miter box, also at an angle of 45 degrees, cutting is carried out.

Pay attention! As a result, when the joining parts of the plinth are combined, a right angle should form between them. If this happens, it means that the cutting was done correctly and the planks can be glued.

Moreover, it is of decisive importance whether you need to arrange an internal or external corner.

The cutting direction should be selected according to the following rules:

• To arrange the outer corner:

1. Mounted to the left relative to the corner, the plinth strip is applied to the wall of the miter box closest to you, with the bottom side facing up. The hacksaw is inserted into the groove closest to you on the left and into the groove on the far right.
2. The plank installed to the right of the corner is applied in a similar way, but the hacksaw is inserted into the near right and far left grooves.

• To glue the inner corner, cut the ceiling plinth as follows::

1. The plinth strip, mounted on the left, is applied to the near side of the miter box, also with the bottom side up. The hacksaw is inserted into the near right groove and the far left one.
2. The part of the plinth installed to the right of the corner is applied in the same way, only the hacksaw for cutting must be inserted into the near left groove and the far right one.

Forming the corner of a ceiling plinth without using a miter box

Now let's look at how to make a corner of a ceiling plinth if the tool is unavailable for some reason. For this purpose, a marking method is used, according to which further cutting is carried out..

The tools you will need to prepare are a ruler, a stationery knife and a corner.

So, let's figure out how to make a corner from a ceiling plinth manually:

1. The corner of the room is measured, for which the corner is applied in the corner compartment to ceiling surface. The indicator should usually be 90 degrees or so (see). If the value is higher or lower, this means that the corners in the room are uneven, and accordingly it will be more difficult to make high-quality corners of the ceiling plinth.
2. Apply a ruler to the plinth at an angle of 45 degrees and, with a careful but bold movement, cut off the excess part of the plinth along the ruler using a stationery knife. If the plinth is made of durable materials, such as wood, the cutting line must first be marked with a pencil, and then the cut must be made with a hacksaw or jigsaw.
3. Before gluing the ceiling plinth in the corners, you need to make sure that the cutting was done correctly by applying them to the corner in the place of subsequent dislocation.
4. If the angle is not right, you will need to accurately measure its degree, then divide the resulting value in half and obtain the required angle for marking the cut of the plinth. For example, if the angle is 80 degrees, then the angles for the baseboard according to which cutting will be done should be 40 degrees.

You will need to carefully double-check the quality of the joint before gluing the ceiling plinth in the corners - a video about this procedure is recommended for viewing for a clearer understanding.

Advice! If the joining still turns out to be of insufficient quality, the plinth strips should be further trimmed, or their edges should be sanded to an acceptable condition, and then the corner joint should be tried on again.

Thus, we figured out how to glue corners on ceiling plinths, what are the features of internal and external plinth corners. In practice, the process of arranging corners looks much simpler than in the description, and certainly will not pose insurmountable problems even for a person without experience in repairs.

You just need to show some patience and attentiveness. And before gluing the ceiling plinth in the corners, a video about which you can find on our portal will once again give you the opportunity to check the quality of the future corner joint.

Skirting boards for ceilings are cut in different ways, but professionals use a miter box. This carpentry jig, which is a tray with slots on the sides. A hacksaw is inserted into them, and a board, lining, plinth and other materials that need to be sawed at a certain angle are placed on the bottom of the tray.

How to trim ceiling plinth?

When finishing finishing work in a house, many homeowners are faced with the problem of cutting ceiling skirting boards, especially their corners. After all, the attractiveness of the interior depends on them. Without these decorative elements, the rooms look unfinished. It’s not difficult to figure out how to cut a ceiling plinth using a square, a metal ruler or a straight strip, since here you only need to maintain a right angle.

But in finishing works It is also necessary to trim skirting boards at other angles, for example 40 degrees. Therefore, the installation of these plastic elements is associated with certain difficulties. To get the appropriate angle, you need to be extremely careful. One of the problems is cutting the ceiling plinth in the corners with further joining.

The following materials are used in the production of skirting boards:

• Wood. Wood is considered the most labor-intensive material to process. Wooden skirting boards sawed with a carpenter's hacksaw.
• Extruded polystyrene foam. Finishing material high density. Does not absorb moisture. When burning, it does not emit toxic substances. It is quite difficult to process, but easy to cut. To do this, you only need a carpenter's knife.
• Foam plastic. It is fragile, the cheapest and easiest to process material. Its fragility is not a drawback, since the baseboards are located right under the ceiling and are not afraid of mechanical stress. You can cut a ceiling plinth from polystyrene foam without any effort.
• Polyurethane. It is characterized by plasticity and flexibility. Thanks to these qualities, it is used on uneven surfaces. It has water-repellent properties and is resistant to temperature changes.
• Polyvinyl chloride. Difficult to fit material due to increased rigidity. Manufacturers offer from it different types finishing: imitation of stone, metal, wood and uniform coloring. In the cold it becomes brittle.

Decorative elements made of aluminum look no less attractive under the ceiling. True, processing and cutting metal is much more difficult than the materials from the proposed list. The increased demand for aluminum skirting boards is due to the fact that they are cable channels in which it is convenient to hide wiring and cables. Equally important is aesthetics, non-reaction to aggressive environments and chemical detergents.

Cut the aluminum ceiling plinth with a hacksaw. To avoid breaking the canvas, reciprocating movements must be smooth and uniform.

Regardless of the material of manufacture, ceiling plinths can be considered the best solution to create unique interior. They are mounted directly difficult area, which is the junction of the wall and ceiling. Anyone who knows how to correctly cut a corner on a ceiling plinth will quickly complete the interior of the room, which will give it more attractiveness. Using these elements you can partially hide minor defects.

The cutting tool is selected depending on the material and the required angles. In rooms of standard shapes with ideal smooth walls and ceilings, a miter box is used to cut off the corners of the ceiling plinth. The wood is cut with a regular carpenter's hacksaw, but for other materials you should purchase a jigsaw. You can also use a hacksaw. To adjust the angles manually, you will need additional tools: ruler, square, protractor, pencil.

Trimming ceiling plinth using a miter box

Work with this device as follows:

• We fix the miter box on the workbench, put it in the tray decorative element and press it to the bottom and to one of the walls. Only in this case can you correctly cut the corner on the ceiling plinth.
• The wood is cut with a regular hacksaw. Insert it into the slots that will give you the desired angle. Hold the cutting tool perpendicular to the element being cut. Internal as well outside corner The ceiling plinth is also cut out using a miter box.
• To cut polystyrene foam strips, it is better to use a carpenter's knife or jigsaw.
• It is not recommended to use force during cutting. The blade must move smoothly, otherwise you can damage the decor or completely deform the product. Foam skirting boards are cut with a jigsaw with the finest teeth. A knife is not suitable for this work, as the material will wrinkle and crumble.

Correctly cutting ceiling plinths where non-standard angles are required is quite difficult. After all, the miter box is not designed for this. If there are no skills, then dents may remain on the products. They are sealed with finishing putty and then painted in the desired color.

The main difficulty is that when cutting it is necessary to maintain the required angle, otherwise when two skirting boards are closed, a clear gap will be visible between them. Many owners don’t even pay any attention to this and are not upset at all. They just putty all the cracks and paint over them. And since it is difficult to choose the exact shade of paint, the entire atmosphere in the room will be overshadowed by lack of aesthetics appearance decorative elements.

We invite you to watch a video on how to cut corners on ceiling plinths. Cutting using a template allows you to make a clear end without the slightest deviation. Processing decorative elements without a miter box is also possible, but provided that the person has a certain skill and knows how to use others auxiliary tools: square and protractor. Using them, it will not be difficult to trim ceiling plinths with non-standard angles.

By the way, You can make a miter box yourself at home. To do this, you will need three identical planks, 15 cm wide, approximately 50 cm long and 1-2 cm wide. The last two parameters are not particularly important, so they can be chosen arbitrarily. We put together a tray from these parts. It resembles a box without ends and a lid. Then, using a protractor, mark the required angles on the side boards with a pencil. Next, using a hacksaw, we make cuts along these marks all the way to the base. You should cut through two planks at the same time.

You should know at what angle to cut the ceiling plinth, so make exactly these angles in the miter boards.

If you cannot make such a device, then use another method. In this case you will need hard cardboard, from which you can cut a template with the required angles. For this work you will also need a protractor. If angles of 45 and 90 degrees are required, then you can use a regular square. This is much easier and faster than building a miter box. Take cardboard, mark and cut out the template the desired shape. Now all that remains is to attach it to the plinth, leave a pencil strip on it and cut the ceiling plinth at 45 degrees.

Professional craftsmen begin installing decorative elements from the corners, and then begin installing skirting boards on straight sections. Here's a video on how to cut ceiling plinths in corners, as well as methods for installing them.

These products are the final finishing elements. They are used for cladding the joints of ceilings and walls. In addition to the fact that with their help they mask a crudely executed pairing, they are in perfect harmony with any style. The wider the baseboard, the more streamlined the interior looks. For suspended ceilings such decorative elements are mandatory. They ideally hide the installation gap between the wall and the frame.

Perhaps from this article you understood how to properly join the ceiling plinth in the corners and how to secure it on straight sections. When choosing such products, we are guided by simple rule: the higher the walls, the wider the baseboard should be. However, the wider, more heterogeneous and harder it is, the more difficult it is to cut. Therefore, for such work it is necessary to prepare absolutely sharp cutting tools. You can try them on scraps of decorative elements. This will be a kind of training that will help you avoid unnecessary pressure in your work. As you know, this leaves dents in polyurethane and PVC, chips peel off from the wood, and the foam crumbles.

Color schemes and decor depend on the style of the room. A huge variety of widths, textures and colors makes it possible to select optimal option For country house or apartments. When installing these elements, the main thing is to cut them correctly. See the photo on how to cut a corner on a ceiling plinth and you can handle this job yourself.

The product is cut and secured in the corners if a fragment of the strip for fastening, cut at the desired angle, has already been prepared, as well as a decorative element to be joined to it. If, when cutting the plinth, the internal angle is not accurate, then you can ignore this. The main thing is that the front side was clearly joined. It is not recommended to attach joints to paint. For this would be better suited rough plaster.

To summarize, it can be noted that cutting ceiling skirting boards is possible without the involvement of specialists. The main thing is to be attentive and do the work thoughtfully and without fuss.