AGREEMENT OFFER

Individual entrepreneur Klimov Alexander Nikolaevich, acting on the basis of a Certificate of state registration individual as individual entrepreneur, hereinafter referred to as the Seller, publishes this Public Offer about Digital Goods presented on the Seller’s website

1. GENERAL PROVISIONS. SUBJECT OF THE AGREEMENT

1.1. In accordance with Article 437 of the Civil Code Russian Federation(Civil Code of the Russian Federation) this document is a public offer, and if the conditions set out below are accepted individual, which accepts this offer, makes payment for the Goods and/or Services in accordance with the terms of this Agreement. In accordance with paragraph 3 of Article 438 of the Civil Code of the Russian Federation, payment for the Goods by the Buyer is an acceptance of the offer, which is considered tantamount to concluding an Agreement on the terms set out in this offer.

1.2. Based on the above, carefully read the text of the public offer, and if you do not agree with any point of this offer, you are asked to refuse to purchase the Products and/or Services provided by the Seller.

1.3. In this offer, unless the context otherwise requires, the following terms have the following meanings:

Acceptance – full acceptance by the Buyer of the terms of the Agreement;

Offer – a public offer of the Seller addressed to any individual (citizen) to conclude a purchase and sale agreement with him (hereinafter referred to as the “Agreement”) for existing conditions contained in the Agreement.

Buyer - Site visitor - an individual who has entered into an Agreement with the Seller on the terms contained in the Agreement and is purchasing Digital Goods (s) and/or services.

Parties - Seller and Buyer are referred to together.

Website – a platform located on the Internet with the domain name “site”, which is an online store containing the Seller’s range of goods and services.

Digital product is a virtual product that is the subject of this agreement and has the following types:

a) finished digital goods – digital goods laid out for sale, having a completed appearance and ready for use.

b) courses – training programs using a distance learning system.

Delivery – delivery by the Seller of digital goods presented on the Site via electronic communication channels to electronic mailbox, the address of which is specified by the Buyer in the Order;

Account is a virtual “office” of the Buyer, in which the registered user sees his personal data.

Registration is the process of the Buyer entering personal data into a special form on the Site when placing an Order (last name, first name, email address).

Order – individual items from the assortment list of Digital Goods specified by the Buyer when filling out an application to receive a Digital Good.

2. SUBJECT OF THE AGREEMENT

2.1. The Seller sells Digital Goods in accordance with the current price list published in the Seller’s online store on the website, and the Buyer makes payment and accepts the Goods in accordance with the terms of this Agreement.

2.2. The Seller delivers Digital Goods in exclusively virtual form, through email and does not mail printed products.

2.3. This Agreement is official document Seller.

3. ORDERING

3.1. The Order of the Goods is carried out by the Buyer by sending a properly completed form during the payment process. All fields of the payment form must be completed. In case of absence necessary information which allows the Buyer to be identified and the Goods sent to him, the Order will not be accepted by the Seller.

3.2. When placing an Order, the Buyer undertakes to provide the following information about himself:

last name and first name,
email address.

3.3. The Buyer gives his consent to the Seller’s processing of the Buyer’s personal data with or without the use of automation tools. This consent of the Buyer applies to his last name, first name and other information related to his personality and specified when placing the Order. Consent is provided to carry out any actions regarding personal data that are necessary for the proper execution of this Agreement, including without limitation: collection, systematization, accumulation, storage, clarification, use, distribution, blocking and destruction, as well as carrying out any other actions with personal data in accordance with current legislation RF.

3.4. Payment by the Buyer for an Order placed on the website means the Buyer’s agreement with the terms of this Agreement. The day of payment for the Order is the date of conclusion of the Agreement purchase and sale between the Seller and the Buyer.

3.5. If the Buyer has any questions regarding the Product, before placing an Order, he must seek advice from the Seller by email at help@site, or through the feedback form posted on the site.

4. CONDITIONS AND DELIVERY TIMES OF DIGITAL GOODS

4.1. Delivery of the paid goods to the Buyer is carried out by sending an email with a link to receive the Digital Goods to the email address that the Buyer specified during the Registration process. The deadline for sending the letter is 8 hours from the receipt of payment.

4.2. The Seller delivers the Goods based on the Order placed by the Buyer.

4.4. The Goods are considered received by the Buyer, and the Seller’s obligation to deliver the Goods is fulfilled from the moment the operation of sending the Goods is recorded via electronic communication channels to the Buyer’s electronic mailbox in the Seller’s automated electronic system.

4.5. In case of failure to receive the Goods by the Buyer within the period specified in clauses 4.1 and 4.2. of this Agreement, or due to technical problems with the mail server of the Buyer's provider or for other reasons, the Buyer must contact the Seller and report non-receipt of the Goods. In this case, the Seller will resupply the Goods free of charge within 2 (two) business days from the date of receipt of the corresponding message from the Buyer.

5. PRICES AND PAYMENT PROCEDURES

5.1. The range and price of Digital Goods are freely available on the Seller’s Website.

5.2. The cost of the Product indicated on the website may be changed by the Seller unilaterally at any time.

5.3. Payment for Digital Goods occurs non-cash using the payment system installed on the seller’s website.

5.4. The Buyer's obligation to pay for the Goods is considered fulfilled from the moment funds are received into the Seller's bank account

6. TECHNICAL SPECIFICATIONS OF DIGITAL GOODS

6.1. Digital products are supplied in the following formats: PDF format, JPG format, mp4 format, XLS format.

7. RIGHTS AND OBLIGATIONS OF THE PARTIES

7.1. Rights and obligations of the Buyer:

7.1.1. The Buyer has the right to be provided with Digital Goods in accordance with those specified in this Agreement technical characteristics (clause 6)

7.1.2. The Buyer is obliged to pay for the Digital Goods in full before receiving the Digital Goods.

7.1.3. Products purchased from the Seller are intended for the personal use of the Buyer. The Buyer agrees not to distribute copies of the Digital Product in any form or manner.

7.2. Rights and obligations of the Seller:

7.2.1. The Seller has the right not to deliver Digital Goods for which it has not received cash in full.

7.2.2. The Seller is obliged to supply the Digital Goods in proper quality in accordance with the technical characteristics specified in this Agreement (clause 4).

8. RESPONSIBILITY OF THE PARTIES

8.1. For failure to fulfill or improper fulfillment of obligations under this agreement, the Parties are liable in accordance with the current legislation of the Russian Federation.

8.2. The Seller is responsible for the conformity of the delivered Digital Goods technical specifications indicated in clause 4, as well as for compliance of the content of the Digital Product with all legal norms.

8.3. The Buyer is responsible for the proper use of the Digital Goods in accordance with clause 7.1.3

8.4. The Seller is not responsible for the content and accuracy of the information provided by the Buyer when placing the Order.

8.5. The Buyer is responsible for the accuracy of the information provided when placing an Order.

SELLER'S DETAILS

IP Klimov Alexander Nikolaevich

OGRNIP 311222511700014

Website Privacy Policy

This site is an information and educational Internet project of Klimov Alexander Nikolaevich (IP Klimov Alexander Nikolaevich. OGRNIP 311222511700014).

This site strictly adheres to the following privacy policy principles:

1. Subscription to the newsletter is carried out at the own discretion of anyone through the form on this website. To do this, your email address is requested. You must also confirm your consent to receive information materials from the site in the letter that arrives after filling out the form.

2. The personal data of each subscriber is used only to send him periodic newsletters, news and project promotions: and will never be transferred to third parties in any form.

3. To get an idea of ​​the content of the newsletter releases, you can familiarize yourself with the contents of the “blog” section of the site:

4. Each subscriber can unsubscribe from receiving newsletters at any time by clicking on the link present at the end of each letter.

In general, I have already considered this in a review article, which was devoted to without the use of a format-cutting machine.

Today I decided to dwell in more detail on a method that is accessible to most DIYers - sawing with a jigsaw, since this tool is very widespread. In this lesson I used a household jigsaw Skill 4581LA, by the way, a very good machine.

For the highest quality cut, the following conditions must be met:

• the file should be fine-toothed (a metal file is optimal)
• sawing is carried out at medium speed

In addition, for a cleaner cut, we will use a modification called “scratch” sawing. Its essence lies in the fact that the laminate is scratched to its full depth and its pieces, pulled out by the teeth of the saw, do not extend beyond the scratch boundary. For clarity, here are a few photos.

You need to scratch along the ruler (with any sharp object - I used a drill bit, or you can even use a self-tapping screw.) To prevent the ruler from moving during the scratching process, I additionally secured it with a clamp - maybe a couple.

We scratch to the full depth of the laminate, that is, until sawdust appears in the scratch.

Then we take the jigsaw and move it so that the file goes as close as possible to the edge of the scratch, without going beyond this border.

Thus, chips are formed only on the unnecessary side, without going beyond our marking line

Once again the same cut upon completion. It can be seen that minimal chips still remain, although they may be on professional equipment. But the evenness of the cut leaves much to be desired.

Of course, there are unique people who can cut quite smoothly with a jigsaw. I'm not one of those people. Of course, the class of the tool itself also plays a significant role. As a rule, the file of inexpensive tools is not as stable as in professional models. Due to this, it is pulled towards the sawing.

All in all, this method has a right to exist, but I wouldn’t recommend putting it on stream.

We recently bought coffee table, the price is inexpensive, but there is a “but”. The height of the table is too big for our interior. It would be nice to reduce the height of centimeters by 10. As they say, we are not looking for easy ways, I decided that

I can handle it with my own hands.

I remembered that on our website there is an asoleg specialist who did it, I am, of course, far from him, but some recommendations may help. I contacted him, explained the problem and he kindly shared his secret. With his permission, I publish his cutting technology furniture chipboard no chips.

Everything turned out to be banally simple. Mark the cutting line. Then, using a stationery knife, along a ruler, we cut top layer Chipboard. Just run the knife several times with little effort along the cut line. (I recommend practicing on an unnecessary piece of wood particle board) If you press very hard, the decorative layer will begin to swell and the result will not be very beautiful.

Next, retreating 1-2 millimeters from the intended line towards the rough part, we cut with a jigsaw or a suitable saw with teeth directed towards the saw handle. We make a notch on the opposite side of the cut to prevent chipping when completing the cut. And saw through to the end. You need to cut carefully, slowly. Then, using medium-grain sandpaper attached to a block, we clean the end of the part. If necessary, we remove the millimeter that we retreated. My cut turned out almost perfect; after sanding, there were no burrs at all. The photo shows the difference between the left and right side of the cut. Well, accordingly, if both parts of the chipboard are needed, we cut with a knife on both sides of the cut. We measure the thickness of the cut with a jigsaw or file and add 2 millimeters. The result is the distance that should be between the slits made with a stationery knife. We cut exactly between these lines. Then there will be no scuffing on the other side either. Naturally, you need to use a sharp tool, I use a tool.

Everything turned out great. On the finished table, my wife did not find the place where I cut.

Thank you for your assistance and assistance asoleg.

Tags: How to cut chipboard without chipping, how to cut chipboard without chipping.

This article is found by the words:

• how to saw off chipboard without chips
• how to cut chipboard without chipping
• how to cut chipboard without
• how to cut chipboard without chipping with a jigsaw
• how to cut chipboard without chipping at home
• how to cut chipboard without chipping at home
• how to cut chipboard without chipping
• how to cut chipboard without chipping
• how to cut chipboard
• how to cut chipboard without chipping

If you like to do things with your own hands, read the article.

In the process of making furniture yourself, the contractor may need to cut or trim the laminated chipboard for subsequent use. Of course, it is best to perform this operation by sawing, but if necessary and to reduce labor intensity, it is quite possible to cut laminated chipboard at home (using a jigsaw). Moreover, it is very important to implement this procedure in such a way as to minimize the number of chips and thereby create an even cut.

Why do chips appear?

Before cutting laminated chipboard or laminate using a jigsaw, it is advisable to understand why chips form when cutting sheet material. And the answer here is simple: everything lies in the design of the jigsaw, or rather in the design of the nail file.

So, during the cutting process, the file receives return movements (up and down). And if when the saw moves along the teeth (usually downwards), chips practically do not form, then when the tool moves in the opposite direction, the teeth seem to tear out the top layer of material, thereby forming an unpleasant chip. That is why you can observe an almost perfect cut on the bottom side of the chipboard and a chipped cut along its upper edge.

Ways to minimize chipping

An additional reason for the formation of chips may be misalignment of the saw teeth. Therefore, the first thing you need to do is purchase a tool with a straight cut (often Bosh files). However, it should be taken into account that when long work, such files overheat and may even bend during the cutting process. Therefore, it is necessary to take breaks from work to cool the cutting tool.

However, just replacing the saw blade is not enough and in order to cut laminated chipboard (laminate) with a jigsaw without chipping, you need to make minor modifications to the power tool. Namely, make sure that when the saw moves against the inclination of the tooth, the material does not pull out. For this purpose it is enough to make a persistent platform. This conclusion can be reached by trying to cut through two laminated chipboard sheet. So there will be practically no chips on the lower element.

In order to make a stop pad for a jigsaw, it is enough to cut out a rectangle from any dense material (for example, laminate) with dimensions identical to the dimensions of the sole of the power tool.

Then, along the larger center line, you should make a notch and secure the resulting equipment to the sole of the jigsaw using insulating tape or double-sided tape. All modifications are ready and finishing work can be carried out in compliance with certain recommendations.

Firstly, as mentioned above, you should use a jigsaw file with a straight cut.

Secondly, in order to better control the cutting process, it is justified to apply a marking line on both sides of the chipboard and check the accuracy of the processing from above and below.

And thirdly, take constant breaks from work to cool the cutting equipment.

Sometimes the solution to this issue can be simply cutting through the laminated layer of material using a mounting knife, and subsequent work with a jigsaw will no longer cause large defects in the form of chips. However this work requires the performer to have certain experience and accuracy.

LDSP is a very common chipboard covered with a paper-resin film, which is also finely sanded. Lamination occurs at a temperature of 140-210 degrees Celsius and at a pressure of 25-28 MPa. After the entire lamination procedure, the surface turns out to be beautiful, durable, resistant to thermal influences and mechanical damage, which gives the chipboard a very attractive appearance when making furniture and when finishing the interior of a room.

A large number of craftsmen prefer to make furniture themselves and for this they buy high-quality laminated chipboard from manufacturers or in ordinary construction stores. A wide range of colors when laminating the surface allows you to easily choose required material. Textures also have a variety: it can be embossed to look like wood spores or shagreen, or smooth, and also imitate natural stone or wood.

But in order to make an exclusive interior or unique furniture yourself, it is not enough to simply purchase laminated chipboard. U laminated coating there is a very fragile structure. If not correct actions The cutting of laminated chipboard turns out to be very ragged, and deep cavities appear on the edges. In order to cut laminated chipboard without cracks and chips, you need to know a few tricks when making a cut.

Basic rules for cutting laminated chipboard

You can cut laminated chipboard at home using circular saw, jigsaw, hand saw with fine teeth. For all work to be successful, you should:

• Fix very tightly along the main cut line duct tape, which does not allow the teeth to damage the front surface.
• Using a sharp knife, make a cut along the cutting line in the laminated coating. In this case, the saw will cut the inner layers of the chipboard, having only a tangential effect on the coating.
• When working, a hand-held saw should be positioned at a very acute angle relative to the surface of the board.
• Sawing using an electric tool with minimal feed.
• On this part, cut off the surface edge layer at an angle of 45 degrees with a thin knife.
• Sanding the cut area should be done with a small file, sanding the cut in the direction from the edges to the center.

To subsequently protect the surface from cracks and chips, you should use overlays: C-shaped overlay edge, self-adhesive melamine tape, T-shaped edge.