How to make wheels out of paper. Handicrafts for children.

Parents often work with their kids to make entertaining crafts from plain paper or cardboard. If these are ordinary animal figurines, then creating them is easy. But if, for example, a car is chosen as a craft, then you will have to work here to make the model as reliable as possible. recommends reading the article.

The car, as you know, has round wheels, which are most easily made from the same material from which the entire model of the car is made. To do this, take thick cardboard and use a compass to draw a circle of the appropriate diameter. You will need four such circles. Their diameter must be determined by examining the car to which such wheels will be attached.

Take sharp scissors and carefully cut out the paper wheels. Next, you need to lay them out and, using pencils or felt-tip pens, try to give the circles the appearance of a real wheel. Draw tires and protectors, try to make them as similar as possible to the original.

The wheels, like a car, can also be painted or varnished, because with this method the model will become more durable. Just wait for the paint to dry thoroughly. Please note that for greater authenticity, the wheels should be painted on both sides.

To make them spin, try to punch a small hole in the very center of the circle with nail scissors. Take the wire rods and carefully tuck them into the holes in the center of each wheel. Secure them with pliers from the outside.

When attaching wheels to a paper car, make sure that they are all placed at the same level. Next, insert the other end of the wire into the pre-made holes in the car and secure the wheels. The wire, which should be quite rigid, is very convenient to secure with pliers.

It is also necessary to leave a small part of the wire axle free so that the wheels can rotate freely. Check if they rotate easily. If this is difficult, then you should slightly enlarge the holes in the center of the wheel. See also others in this section.

How to make a gazebo - greenhouse DIY covers for armchairs and sofas, pattern, covers for armchairs and sofas Water at the dacha - do-it-yourself water tank for the dacha How to knit a baby hat with knitting needles How to make Christmas tree decorations with your own hands

We will need: matches, a compass, a ruler, a pencil (well sharpened), a notebook, a protractor (you can do without it).

1. We will produce an assembly panel as auxiliary tool for making crafts. First, let's draw a template for the machine. Here is a drawing for making a wheel consisting of 15 links. Using a compass, draw a circle with a radius of 4.2 cm and divide it, using a protractor, into 15 sectors of the same size (24 degrees).

In principle, a wheel can consist of 14 links. And such a design would be even preferable, since with 15 links the load-bearing matches have a very high voltage.

2. As soon as the drawing of the tool is ready, you can begin to manufacture it. We take an unnecessary book that has a hard cover and cut off the cover from it. Next we will use a hammer and nail to knock out holes on this cover.

3. Cut out the drawing and paste it on the cover. We punch holes in it in the places marked in the drawing. The backing can be the same book from which the cover was cut.

Such a book could well be, for example, a book about Friedrich Engels and Karl Marx.

4. Let's start assembling the wheel. We select matches, discard split, thin, bent and crooked ones. We stick support matches into the assembly panel.

5. We begin to fill in the gaps between supporting elements carrying matches. Each subsequent match must overlap the previous one.

6. Raise the first supporting match of the ring in advance. It will overlap the last 2 matches of this ring.

7. We insert the penultimate carrier match.

8. Place the last match in the ring.

9. Press the first 2 matches of the ring down, then press down the remaining matches of the ring. By analogy, we lay the second ring.

10. Place the third ring.

11. Place the fourth ring.

12. Place the fifth ring. Once again we will consider in detail the process of laying the last two supporting matches.

13. Raise the first supporting match.

14. We insert the penultimate carrier match.

15. Place the last match in the ring.

16. Gently press down all the match-carrying wheels. The assembly panel can then be lifted.

17. Turn the assembly panel over and begin to carefully squeeze the support matches out of the holes in a criss-cross pattern. To do this, you can use a match.

The wheel of matches is ready.

Many people know that many types of crafts can be made from cardboard. In childhood, probably, any person with imagination and the desire to make something with his own hands made something from such available material. Few people know, but there are people who have not given up this childhood hobby and make truly amazing things out of cardboard.

Today we will tell you how to make a car out of cardboard.

Beautiful car

It will surely delight your baby.

So what we need:

• At least two pieces of cardboard boxes;
• Colored paper;
• Scissors;
• Compass;
• Colored pencil or felt-tip pen;
• Copper wire;
• Pliers;
• Glue.

Cut off the walls of the boxes and draw circles on them, these will be the wheels for our future car. Then cut them out using scissors.

Having attached the circles to the base of the second box, trace with a pencil the places where the wheels will be located.

Using an awl or scissors, make holes on the sides where the center of the wheels will be located.

Cut pieces of the prepared wire as long as the width of the future car. This will be the basis for the wheel axles.

Using glue, attach the wheels to the pieces of wire threaded through the holes. If you want the wheels of the car to eventually spin, use pliers to pinch the ends of the wire on both sides in the form of loops.

Then we'll start making the car look beautiful. appearance. To do this, use a pencil to draw and color windows and doors, then cut them out with scissors. Or they can be cut out of self-adhesive paper suitable color. If you have time and patience, you can make the doors open.

In the same way, you can create a cardboard trailer for her, it will be more fun. You can attach it again with a piece of wire.

By the way, if you get inspired, you can make a few more trailers, then you’ll get a whole road train.

You will need following materials for this craft:

• Sheet of cardboard.
• Paint, brush for coloring.
• Glue or stapler.
• Scissors.
• Unnecessary and outdated old toys to decorate your car.
• Seven round cardboard tubes that remain after toilet paper.

Paper cardboard tubes are painted in different colors in any way - with a brush or using a piece of cotton wool. Then you cut out circles from cardboard, they will serve as cylinders for the car and paint them.

You glue these wheels to the sides of the car using glue or a stapler.

And now we will tell you how to make a car out of cardboard using modern computer technology.

Racing car

You will need:

• Paper
• Printer
• Scissors

This type of craft is easy to make; you just need to print it, carefully cut it out and glue it along the drawn contours. You can find any number of such blanks on the Internet; an example of one of these is shown in the figure below.

How to make a car out of large cardboard?

Tape all parts of the box together.

On both sides, draw doors symmetrically on both sides and cut them out using a sharp knife with a thin blade.

Draw and cut in the same way. windshield.

Using tape, secure the bent parts of the ends with an inward bend, now using the same tape to secure the windshield.

If there are any extra pieces left at the corners, trim them off with a knife or scissors.

Using the bottom of paper cups, you make wheels for your future car. If you don’t have them on hand, you can simply use round pieces of cardboard of the desired color and size.

Now color your creation and admire it!

The simplest and nicest machine

Shape a piece of paper into a square. For those who don’t know, this is done like this: bend the sheet diagonally and cut off the pieces that protrude beyond the edges. Trim off the excess with scissors.

Bend the square into two halves, then two more times lengthwise and crosswise. This will show you the fold lines. Now you can expand the sheet.

Wrap its lower ends to the very top of the middle. Then bend the lower parts of the bent corners on both sides to make wheels.

Fold everything that comes out in the end in half along the line that is located along the central fold. Bend the lower part up and bend the upper right corner.

Draw the headlights and other details on the product, paint it in any colors. We hope this simple craft will delight your child.

Car for girls

Few parents realize or understand that not only boys, but also girls can play with cars. Below we will tell you how to make a car to carry your favorite dolls in it. I think your daughter will really like this craft.

So, what you will need to have on hand:

• One carton from under shoes;
• Thick cardboard;
• Thin paper of different colors;
• Glue;
• Double-sided tape;
• Long wooden sticks in the shape of toothpicks;
• A small piece of transparent plastic;
• Any objects that resemble headlights.

To begin, draw on paper a template of doors that would fit the size of the toy. The usual length of the legs, for example, of a Barbie doll, which girls love so much, is eighteen centimeters.

Cut the workpiece on both sides and bend the ends of the resulting template inward. We will attach the seats to these tips.

Then make cuts with a sharp knife where the car seats will be.

Now cut it out smooth circles made of colored and thick cardboard, four pieces of each. These will be the wheels.

Using a needle or awl, make through holes in the center of these circles and then make more of them.

Cut out the hood and trunk from thick cardboard according to the size of the shoe box.

In turn, glue each prepared part to the car, then make holes in the box for the wheels.

Use colored paper to cover the car, then make a windshield using transparent plastic.

Video lessons

Gluing wheels for paper cars, rollers for tanks, and any cylindrical parts is not entirely easy. Usually there are a lot of them and there are a lot of valves on them, which take a long and tedious time to cut out. In this article we will talk about one of the gluing methods, in which we will cut off the excess flaps and glue the parts end-to-end.

First we cut it out the required part paper model. After this, we cut off the valves; in our method they will not be needed. It’s not that we don’t like valves, but in our opinion, it’s much easier to glue wheels and rollers without them.

Next, the most important thing is to find an object, a cylinder of the same diameter as our part. In our case, a regular battery was ideal. As such an item, you can use all kinds of bottle or spray caps, pens, markers, and so on.

We put our cylindrical part on the found object. This will give the cylinder correct form for gluing the base.

There is little left to do - glue the base to our cylinder. Since we cut off all the valves, we will have to glue them end to end. After applying the glue, it is necessary to press the base of the cylinder without removing it from the found object. That's it, the part is ready, you can do the next one.

Do you have an idea?

Send your materials to our address email - This email address is being protected from spambots. You must have JavaScript enabled to view it. . Best materials will definitely be published.

The uniqueness of paper crafts is that to make them you need something accessible to any family. safe materials. Possession of such art is possible small child. You can attract a boy to needlework by creating paper toys only by getting him interested in this activity. Suggest little man options on how to make and print a car, car, truck and KAMAZ from paper using a gluing template.

The uniqueness of paper crafts is that to make them you need safe materials available to any family

How to fold or assemble a police car from paper using origami: a simple diagram and drawings

The craft can be made both for play and an original gift good friend- an adult. Since men are always boys at heart, an origami machine made from a banknote is a suitable gift.

You will need:

• Rectangular sheets of colored paper;
• scissors, glue.

How to make a toy car:

1. Fold a sheet of paper of the selected color horizontally. This is the central bend of the future product.
2. Bend the two halves of the sheet on the left and right sides inward, parallel to the bending lines.
3. Bend the bends back inward. Then turn the ends of the sheet out from the inside out.
4. Bent Bends internal corners form the body of an improvised paper machine.
5. Make triangle folds under the wheels. To achieve maximum resemblance to a wheel, bend the corner vertices inward.
6. For headlights, also bend the right corners of the car internally. On the left side we make the bends in the same way, but smaller in size and outward.

To make your car more colorful, stick paper triangles of a different color on the headlights.

How to make a paper car in 3 minutes (video)

Gallery: paper car (25 photos)

How to make a car that drives out of paper

You can make a moving racing car out of paper. To start moving, place such a craft on smooth surface and blow on it. Under the influence of the air flow, the figure begins to slide across the surface, imitating the movement of a real racing car.

Necessary:

• A sheet of white paper with a side ratio of 1:7 or A4.

You can make a moving racing car out of paper

How to do:

1. Fold the paper sheet in half lengthwise.
2. Mark the fold lines by folding the top right and bottom left corners of the paper.
3. Form a curve at the top of the sheet with inner triangles in the center.
4. In the central direction, bend the existing triangles again.
5. By bending the sides inward towards the center line, we form the sides of the car.
6. Fold bottom part sheet with triangles over the top of the craft, then bend the figure in half. Tuck the corners into the pockets.
7. Now the car model can be decorated as you wish.

By helping and guiding your child’s work, you can build a whole racing fleet.

How to make a truck out of paper

The figure of the truck looks more impressive in a three-dimensional format.

You will need:

• Thick paper;
• Glue, scissors;
• Wooden skewers;
• Double-sided tape;
• Plastic bottle;
• Compass, pin.

The figure of the truck looks more impressive in three-dimensional format

How to do:

1. Cut separately four squares for the cabin, three equal rectangles and two squares for the body.
2. Fold two boxes from the cut out figures and connect them with fastenings using tape inside. First, you can cut out the side windows from two squares of the cabin, securing pieces of plastic from the inside with tape. We do the same with the front of the craft, imitating a windshield. Glue the cab and body parts together.
3. On black paper, use a compass to mark eight small circles of the same size with a central point. For stability, glue future wheels together in two circles. Make a small hole at the center point with a pin.
4. Attach the wheels through symmetrical opposite holes on the sides of the figure, placing them on skewers through the hole.
5. Color the figure of the truck with paints as desired.

The stability of the model will be ensured by the strength of the wheels - the more circles glued at the base of the wheel, the better the craft will be.

How to make a war machine out of paper

You will need:

• Sheet thick paper dark green;
• Skewers;
• Scissors, compass;
• Pencil, ruler, glue;
• Black paints, brush;
• Paper or plastic cocktail straws.

the finished product can be further decorated

How to do:

1. Draw four squares for the cabin. On another sheet, draw three rectangles and two squares for the body. Take a sheet separately, fold it lengthwise into three parts, glue it into a triangle - this will be a mount for rockets.
2. Draw side windows on the cabin parts and a windshield on the front square. Glue the squares together on the wrong side with tape or strips of paper.
3. Connect the car body parts in the same way. Glue a paper triangle at the top.
4. Combine the finished cabin and body into a single model of the car.
5. Make eight identical circles with a central point from black paper. Use a needle to make a hole in the marking for the skewers.
6. Make holes at the bottom of the cabin and body with skewers, and string wheels on them. To prevent the structure from falling apart, soak the ends of the skewers in glue and dry.
7. Cut the cocktail tube into equal parts, about 3 cm each. Paint all the pieces black. Let dry thoroughly.
8. Carefully place homemade rockets on the body mount with glue.

To decorate a military vehicle made of paper, you can draw finished product dark spots on the sides (or stripes along the hood) with watercolor paints.

Paper racing car

This racing car figure is designed for little ones.

Necessary:

• Toilet paper roll;
• Paints, brush;
• Cardboard, compass, scissors;
• Toothpicks 2 pcs.

This racing car figure is designed for little ones

How to do:

1. Clean the paper roll from any remaining toilet paper, paint it in the desired color with watercolors. Draw when dry ballpoint pens racing designations.
2. Using a compass, mark four equal circles for the wheels, cut them out, and paint them with black paint.
3. At the base of the roll, use a pin to pierce the holes for the toothpick axle.
4. Thread the roll onto toothpicks and secure on both sides of each wheel.
5. Cut a semicircle at the top, bending the outer part like a windshield.
6. You can put a man cut out of paper inside, attaching it with tape.

To make your car wheels spin, place a drop of glue on the ends of the toothpicks. Dried glue will prevent the paper wheels from being removed when moving.

Paper diagram of a car: how to make it

The machine's deployment diagram can be downloaded from the Internet. The presented models allow you to make any type of equipment out of paper, from special equipment to Soviet times.

To make a figure according to the diagram you need:

• Selected car model diagram;
• Scissors, cardboard;
• Glue.

How to do:

1. To ensure the stability of the future figure, paste the picture of the diagram onto cardboard. Trim after drying.
2. Fold the layout details along the lines. Glue them together, carefully hiding the gluing points.

How to make a paper car (video)

Assembling an origami machine or diagramming one will seem a little complicated at first. However, a fascinating and educational activity will delight the future designer. Handmade develops the baby's thinking, helping to improve hand motor skills. And the car you make will become your favorite of all toys.