One of the most popular in household power tools – angular Sander(angle grinder), popularly called an angle grinder. Despite the fact that its main purpose is grinding, it is more often used as a cutting tool. various materials. This is primarily due to the abundance of types of disks that can be installed on it.

The main disadvantage of an angle grinder when performing such work is the low cutting accuracy, because while holding an angle grinder in your hands, it is extremely difficult to maintain the exact angle and direction of the cut. It is rarely possible to trim any material strictly at a given angle. Especially if you have to prepare parts of the same type of any design, and even with specified cutting angles. This disadvantage can be minimized by applying to the grinder special stand.

There are such factory-made devices for various models Angle grinders, some of them are quite versatile. But relatively high price makes them inaccessible to most home craftsmen. Meanwhile, most of these craftsmen are able to make a stand for their angle grinder with my own hands without spending a lot of money or time on it.

Drawings of a stand for an angle grinder

There are not many drawings of such racks on the Internet. Basically, these are primitive sketches that illustrate the principle of operation of the device rather than the exact dimensions and order of its assembly. And even those that exist do not have all the necessary information.

And the very design of such devices quite often raises doubts about the use of such a drawing without some correction.

Therefore, we advise you not to waste time searching for them, but to carefully consider the options for implemented projects to create homemade racks for angle grinders, choose the one that suits you. Or, taking into account their shortcomings, implement your own.

Do-it-yourself stand for an angle grinder - overview of options

The main tasks of this rack:

securely attach the instrument to the console;
ensure minimal deviations from the cutting plane during operation;
hold the tool securely in the up position.

To attach the grinder to the console, threaded fastenings of the handle on its head are suitable. There are 3 of them, and this is more than enough for reliable fixation.

Sometimes not everyone uses them.

And sometimes, to fasten the grinder, they use a fairly rigid one that is securely attached to its head. protective cover.

For small grinders working with discs up to 125 - 150 mm, sometimes it will be sufficient to fasten the body to the console using powerful clamps, but to prevent axial rotation of the tool, the stop pad of the grinder head must be used.

angle grinders working with cutting discs large diameter(200 - 230 mm), in addition to securely fastening them to the console, must have a good support base for attaching the console itself to the desktop.

This ensures minimal deviation from the cutting plane.

Many DIYers ensure the oscillatory movement of the console by installing one or two bearings to attach it to the desktop. For this purpose, ready-made bearing units for cars or bicycles are often used. However, sufficient mobility will be ensured by simple bolted connection, the parts of which, if well lubricated, will work as ordinary plain bearings.

So, as shown in the video describing the simple design of a metal angle grinder stand:

True, we would not rely on such reliability of fixing the tool in the upper position, as the author of the video recommends, but would install the tension spring in a convenient place.

It is clear that repairing such a console mount comes down to replacing the bolt, or, in extreme cases, simply increasing its diameter or installing a bushing if the mating parts are worn out a lot.

A similar principle of ensuring compliance with the flatness of the cut is also ensured when making a stand not from corners, but from profile pipes. Watch a short video about a simple homemade metal drain for an angle grinder:

Few people dare to do wooden stand for an angle grinder, but this does not mean that it cannot be done. Here are some Constructive decisions, which we want to show you, may well serve as a source of ideas for creating a rack of your own design, incl. and from this material.

To enlarge the picture, click on it:

Sometimes, to ensure the tool returns to top position after making a cut, instead of a tension spring, a conventional counterweight is used to compensate for the weight of the tool itself.

Features of using an angle grinder as a saw

For your safety, it would be useful to remind you that not all types of discs can be directly used for an angle grinder. First of all, this concerns disks for sawing wood, which have significantly lower speeds than are used in almost all grinders.

The exception is special wood discs designed for standard angle grinder speeds.

It's good if your tool has speed control. And if not, then before using your angle grinder as a miter saw for wood, make a simple speed regulator based on the KR1182PM1 microcircuit, or similar in performance, according to such a scheme.

You should not use a simple rheostat for this. Along with the reduction in speed, it will also proportionally reduce the power and torque of the tool. And for the grinder itself, using it in such operating modes is harmful.

We strongly recommend securing your rack emergency shutdown button tool, because access to the shutdown button after installing the angle grinder in the rack can be difficult. And even an angle grinder securely fastened in the device is a rather traumatic tool.

You can place such a button in the cut of its power supply wire, but it is better to break the supply line with it, because when removed from the stand, the angle grinder becomes an ordinary mobile tool with all its advantages.

The simplest device for an angle grinder stand

Actually, this device cannot be called a stand, but the work with it can be done almost the same as that provided by the most technologically advanced stand. The principle of its operation is clear from the short video:

But if instead of a strip you use a corresponding corner with a sawn-off part of one of the shelves, as one of the authors of a similar design did, then there will be no need to drill a blind hole in the head of the angle grinder.

In this case, the tool will be fastened with two screws into the threaded holes for the handle existing on the head of the angle grinder. But the principle of operation of the sole will not change - only its rigidity will increase.

The method of using the grinder as a kind of semblance will also not change circular saw using the same sole, shown in another video by the same author:

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)

The grinder is an indispensable tool when performing construction, installation and other work. The main task of this design is to cut metal or stones with high speed. If you use special attachments, you can thoroughly sand the base of the workpiece, clean it and remove various contaminants. However, in order to be able to use this tool in other areas, you will need to buy or make homemade devices for the Bulgarian.

In some cases, the grinder is used as a wall chaser. To do this, you will need to increase the width of the protective casing, and then make a plate for support. Such a tool can be used either with one disk or with several. In the latter case, it will be necessary to improve the fastening unit. If necessary, the modernized case with the support element can be easily removed, and then use the angle grinder as usual.

It happens that you need to carry out work to clean hard-to-reach foundations. For such purposes, craftsmen use a special attachment that is capable of carrying a small-diameter disc beyond the dimensions of the grinder. Rotation in this case will be transmitted from the main drive using a special belt drive (rubber belts are used). Cutting using this design will not work, but you can easily remove scale from the weld seam.

Today there are quite a large number of different attachments with which you can expand the scope of application of this tool. Among them the main ones are the following:

devices for sanding substrates and removing old layers of paint;
beds;
protractors.

Read also:

DIY inverter 12 to 220 –
What do you need to make homemade tools for an angle grinder?

Most owners prefer purchasing ready-made attachments in construction supermarkets. Such elements are not too expensive, and there should be no problems with finding devices. However, some people prefer to make such parts for an angle grinder with their own hands.
In order to make devices of this type, it will be necessary to purchase such elements as:

electric drill with a small number of different drill bits;

screwdriver;

hacksaw for working with wood;

grinder discs with a diameter of 125 mm;

wooden bars;

metal corner;

duralumin steel plate;

self-tapping screws

First of all, you need to cut a plate out of metal. Next, you should make an angle out of it. To do this, you will need to make a triangle-shaped cutout in the workpiece shelf and bend it at a right angle. In the design of the metal plate, you will need to drill 6 holes with a diameter of 4 mm. Self-tapping screws will be installed in these holes, which will be able to fix the handle, corners and timber beams. All holes must have special recesses for screw heads.

The handle is attached to the beam using several self-tapping screws. The dimensions of the elements for fastening should be 3x35 mm. As a result, it will be possible to obtain a part in the shape of the letter G. All elements, together with the plate, are assembled into a single structure. The accessories for the grinder need to be secured with several 3x20 mm self-tapping screws.

On at this stage the base of the structure is ready. Next you will need to install metal corners. There should be several similar elements, with dimensions 75x30x55 and 45x60x60 mm. It should be noted that the first corner must be bent from 90° to 60°. If this is not done, then it will not be possible to attach the manufactured structure to the angle grinder. After the metal corners are installed, you will need to secure the tool itself to them. It is connected to the structure using a separate handle on one side and a bolt and nut on the other. The latter will be needed to ensure that the screw does not unscrew from the structure during the process of cutting the material. You don’t have to mount the nut on the handle, as it will be held by hand. At this stage, the structure for cutting has been made.

Return to contents

How to make a frame for an angle grinder with your own hands?

Similar devices for grinders are used to make it possible to facilitate the user’s efforts when cutting workpieces. It is worth understanding that holding a tool with a large weight in your hands for several hours is quite difficult. Therefore, most craftsmen want to make special device for an angle grinder, which is called a frame. Using such structures, you can carry out cutting metal workpieces with one hand.

First of all, you will need to make a box from wood. You can only make one side so that you can attach the angle grinder. All other walls need to be removed, and special legs must be attached in their place.

However, for such a tool to be effective, the first step is to adapt it to existing conditions. To do this, you will need to dismantle the casing of the angle grinder for protection. Next, you should put the disk on the instrument. When it is pressed against the side wall of the device, you need to put a mark where the gap was made for the movement of the nozzle or disk. It should not be too wide, otherwise it may get inside the structure. foreign elements. However, it is worth knowing that the gap can be expanded. This should be done in cases where there is a need to replace nozzles without completely disassembling the entire structure. As supporting elements you can use several blocks of wood. After this, you can begin sawing various workpieces.

Features of using an angle grinder

When performing construction and installation work a large amount is used different instruments. The most commonly used grinder is the grinder. The main task for which it is used: metal cutting; processing of building materials.

If you also use attachments with this tool, you can expand the number of options for its use. In particular, using this tool with attachments, you can perform high-quality grinding blank bases. They will be cleared of foreign inclusions. Attachments for grinders can be purchased at the store. But if you do not want to pay money, then you can make them yourself.

In some cases, this tool is used as a wall chaser. With his help grooves are created for laying pipes and electrical wires. To use an angle grinder in this capacity, you will have to perform some manipulations and increase standard width protective casing. In addition, you will need to make a support plate.

This tool can be used with one disk or several at once. If the grinder is used with two disks, then it is necessary to make some changes to the attachment point of this tool. After this, the grinder can be used in standard mode.

It often happens that during repair work and there is a need to clean the base of parts that are difficult to access. In such cases, craftsmen most often resort to using a homemade device for an angle grinder in the form of a special attachment, thanks to which the disc small size can be carried beyond the dimensions of the angle grinder.

In this case, the rotation will be transmitted using special belt drive from the main drive. Using this design, materials cannot be cut. However, scale can be removed from the surface of materials without any problems. It often occurs on the surface of welds.

Currently, the market offers a large number of attachments for tools such as an angle grinder. Their use makes it possible to significantly expand application options this tool. If we talk about the most commonly used attachments for grinders, we can highlight the following:

a device for sanding the base and removing the paint layer from the surfaces of materials;
beds;
protractors.

Materials and tools to make attachments for an angle grinder

When the need arises to use an angle grinder for specific tasks, in this case many craftsmen opt for ready-made attachments. They can be purchased without any problems at a hardware store.

The cost of the devices is not very high, so everyone can afford them. There are also no difficulties in finding these attachments. However, despite all this, many people still decide to make attachments for an angle grinder with their own hands.

If you decide to make attachments for this tool yourself, then before you begin, you need to prepare the following tools:

An electric drill, it is advisable to purchase a set of drills in addition to it;
It is advisable to choose discs with a diameter of 125 mm.
Wooden bars.
Metal corner.
Duralumin steel plate.
Self-tapping screws.

Work technology

Before starting work, you need to cut a plate out of metal. After this you need to make an angle out of it. To achieve your plan, you must first do triangle shaped cutout in the workpiece shelf. And when this is done, the workpiece must be bent at a right angle.

Further, the design of the plate should drill six holes. The diameter of each of them should be 4 mm. Subsequently, it is in these holes that the self-tapping screws will be installed. With their help it will be possible to fix the handle, corners and timber. All holes must have special recesses for screw heads.

To securely fasten the beam handle, a few self-tapping screws are enough. The fasteners used during this work must have dimensions of 3x35 mm. This will allow you to get the part L-shaped.

After this, all the elements together with the plate are assembled into a single structure. The created tool fixture must be secured using 3x20 mm self-tapping screws.

So, the basis of the future structure has been made. Next, you will need to perform installation of metal corners. You should have several of these items available. They must have the following dimensions:

Please note that the first corner must be extended to 60 degrees. If this is not done, then you will not be able to achieve your main goal - to fix the manufactured structure on the angle grinder. When the installation of the metal corners is completed, the tool itself is attached directly to them.

To connect the tool and structural elements, use a separate handle on one side, and bolts with nuts. on the other side. The latter are necessary so that during work the screw of the structure does not unscrew.

If desired, you can refuse to install the nut on the handle, since it will be held by the hand of the master during work. At this point, the work on creating a cutting structure can be considered complete.

How to make a frame for an angle grinder

Grinders are often used together with a stand. They are used mainly to enable the master to carry out certain work on cutting materials and workpieces with less physical effort.

It is obvious to everyone that it is extremely difficult to hold a heavy instrument for several hours. Therefore, to make their work easier when performing an operation, many craftsmen make special devices. which are called beds. When an angle grinder is equipped with such a device, cutting work can be done using only one hand.

To make a frame, you first need do wooden box . You can get by with only one side on which the tool will be attached. All other walls can be removed, and legs of a special design can be attached instead.

But in order to achieve the effectiveness of using an angle grinder with such a device, it is necessary to make some changes to its design.

The first step is to do dismantling the casing of the angle grinder. After this, you need to put a disk on the instrument. When this action is completed, it must be pressed against the side wall of the device.

It is necessary to mark where the gap was made for the movement of the nozzle or disk. Its width should not be too large, otherwise foreign objects may get inside the structure during work.

If desired, the gap can be increased. The need for this arises in cases where it is necessary to replace the nozzles without completely disassembling the entire structure. Samples of wooden blocks can be used as support elements. After this, you can begin cutting workpieces.

Protractor for grinder

When carrying out construction and installation work, an important device for an angle grinder is a protractor. It is especially indispensable when work is carried out on processing or cutting metal profiles.

By using such devices, you can easily calculate cutting angles blanks And this has a positive effect on the speed and quality of work performed. In addition, this device is suitable for cutting metal profiles.

This type of design is widely in demand when working on wall and floor tiles.
They are also used for cutting and processing flooring and baseboards.

By making a protractor for an angle grinder with your own hands, you will no longer need to purchase special tools, which are quite often expensive and large in size. A homemade protractor is not suitable for industrial use, but for home use it will be an excellent replacement for store-bought tools.

The operating principle of a homemade protractor design

The first thing to do is install guide angle. equipped with a special overlay for the tile. A similar pad is used to prevent the workpiece being fastened from slipping. Therefore, thanks to it, displacement of the element will be eliminated.

Then you need to press the workpiece tightly against the shelves of the corner. After this, the user must set the cutting angle he needs.

Next, you can proceed to cutting the material. When performing this action, it is necessary to take into account that when cutting it is necessary to press lightly on the disc. There is no need to make any serious physical effort.

A homemade protractor for an angle grinder has a design consisting of the following elements:

Corner.
Loops.
Bolt used for fixation.

Note that making such elements with your own hands is quite difficult. Therefore, if you are unsure that you can cope with such a task, then it is better buy in store ready-made models transporters

The grinder is a fairly popular tool among builders and repair specialists. It can be used to cut various materials and process workpieces and parts. However, sometimes specific operations are required. Therefore, experts purchase special attachments for the grinder. They can be found in stores without any problems.

The use of such devices allows you to expand the number of options for using this tool. However, it is not always necessary to buy them in hardware stores. If you wish, you can make them yourself. To do this you just need to have free time and know how to properly make attachments for an angle grinder.

DIY accessories for an angle grinder

In order not to hold a heavy tool in your hands, you can make a simple device that will help you when working with an angle grinder. Its simplest version consists of two plates of different sizes screwed together.

One of them is made of steel, duralumin or textolite piece 30*12 (15) cm. In the third case, 5-6 mm material is taken. The second plate is made of steel 120*50 mm. It bends in the middle at an angle of 60 degrees. You can take a corner of the appropriate size and bend it.

4 simple holes are drilled in a small plate (corner) for installing it on the main surface and one with an M8 thread for securing the angle grinder. The working tool is secured with an M8 bolt with a lock nut, which is needed to prevent the bolt from turning out due to vibration.

For greater convenience of working with this device, additional components have been developed. Their main function is precise cutting (along the line).

The first node consists of the same plates, to which are added:

square 30*30*420 mm;
corner 55*30*80 mm;
two wooden blocks 27*30*35 mm and 120*60*25 mm.

The bars are screwed together with screws in the shape of the letter “G”. A triangle is cut out in the square at a distance of 12 cm from the end, and it is also bent “L-shaped”. The connected bars are placed on a square, and the entire structure is screwed with screws (hats at the bottom) to the main plate.

A corner is installed on one side of the long bar to more securely secure the handle of the grinder.

Serves as a limiter and guide during operation. regular board. The master rests the device against it, so that when moving it, an ideal line is obtained.

The second unit consists of the same two main plates. You screw a square to the main one from below with your own hands, which plays the role of a cutting limiter. It is advisable to make several rows of holes in the main substrate for different widths of the part to be cut.

How to make homemade tools for an angle grinder?

The grinder is an indispensable tool when performing construction, installation and other work. The main task of this design is to cut metal or stones at high speed. If you use special attachments, you can thoroughly sand the base of the workpiece, clean it and remove various contaminants. However, in order to be able to use this tool in other areas, you will need to buy or make homemade tools for an angle grinder.

Diagram of the grinder device.

Today there are quite a large number of different attachments with which you can expand the scope of application of this tool. Among them the main ones are the following:

devices for sanding substrates and removing old layers of paint;
beds;
protractors.

What do you need to make homemade tools for an angle grinder?

Assembly diagram of the grinder.

Most owners prefer purchasing ready-made attachments in construction supermarkets. Such elements are not too expensive, and there should be no problems with finding devices. However, some people prefer to make such parts for an angle grinder with their own hands.

In order to make devices of this type, it will be necessary to purchase such elements as:

electric drill with a small number of different drill bits;
screwdriver;
hacksaw for working with wood;
grinder discs with a diameter of 125 mm;
wooden bars;
metal corner;
duralumin steel plate;
self-tapping screws

First of all, you need to cut a plate out of metal. Next, you should make an angle out of it. To do this, you will need to make a triangle-shaped cutout in the workpiece shelf and bend it at a right angle. In the design of the metal plate, you will need to drill 6 holes with a diameter of 4 mm. Self-tapping screws will be installed in these holes, which will be able to fix the handle, corners and timber beams. All holes must have special recesses for screw heads.

Design of a single-phase asynchronous motor.

The handle is attached to the beam using several self-tapping screws. The dimensions of the elements for fastening should be 3x35 mm. As a result, it will be possible to obtain a part in the shape of the letter G. All elements, together with the plate, are assembled into a single structure. The accessories for the grinder need to be secured with several 3x20 mm self-tapping screws.

At this stage, the base of the structure has been made. Next you will need to install metal corners. There should be several similar elements, with dimensions 75x30x55 and 45x60x60 mm. It should be noted that the first corner must be bent from 90° to 60°. If this is not done, then it will not be possible to attach the manufactured structure to the angle grinder. After the metal corners are installed, you will need to secure the tool itself to them. It is connected to the structure using a separate handle on one side and a bolt and nut on the other. The latter will be needed to ensure that the screw does not unscrew from the structure during the process of cutting the material. You don’t have to mount the nut on the handle, as it will be held by hand. At this stage, the structure for cutting has been made.

Return to contents

How to make a frame for an angle grinder with your own hands?

Schematic diagram of the angle grinder speed controller.

Similar devices for grinders are used to make it possible to facilitate the user’s efforts when cutting workpieces. It is worth understanding that holding a tool with a large weight in your hands for several hours is quite difficult. Therefore, most craftsmen want to make a special device for an angle grinder, which is called a frame. Using such structures, you can carry out cutting metal workpieces with one hand.

First of all, you will need to make a box from wood. You can only make one side so that you can attach the angle grinder. All other walls need to be removed, and special legs must be attached in their place.

However, for such a tool to be effective, the first step is to adapt it to existing conditions. To do this, you will need to dismantle the casing of the angle grinder for protection. Next, you should put the disk on the instrument. When it is pressed against the side wall of the device, you need to put a mark where the gap was made for the movement of the nozzle or disk. It should not be too wide, otherwise foreign elements may get inside the structure. However, it is worth knowing that the gap can be expanded. This should be done in cases where there is a need to replace nozzles without completely disassembling the entire structure. Several wooden blocks can be used as supporting elements. After this, you can begin sawing various workpieces.

Return to contents

How to make a protractor for an angle grinder with your own hands?

The protractor is the most important device when performing construction and installation work. Such elements for grinders are indispensable in the process of processing and cutting metal profiles. The use of such a design allows you to accurately calculate the cutting angles of workpieces, which has a positive effect on the quality of the work performed. Such a device can be used not only for cutting metal profiles. The design is widely in demand when processing wall and floor tiles, floor coverings and baseboards.

A do-it-yourself protractor is an excellent replacement for large and expensive specialized tools.

The position of the handle of the grinder.

In an industrial environment, there will be no benefit from equipment that you make yourself, but at home this element cannot be replaced.

The design has the following operating principle:

First of all, the tile (or any other material to be cut) is installed on a guide angle with a special overlay. A similar pad is used to prevent the workpiece being secured from slipping. Therefore, in this case, the possibility of displacement of the element is excluded.
After this, the workpiece will need to be pressed tightly against the shelves of the corner. Then the user must set the required cutting angle.
At the next stage, you can start cutting the material. In this case, it should be taken into account that for cutting you will only need to press lightly on the disk - much effort will not be needed.

The design of such a homemade product consists of the following elements:

It is worth noting that it is quite difficult to make such elements with your own hands, so the easiest way is to purchase ready-made models of protractors in construction supermarkets.

When using various additional attachments for grinders during work, you will need to remember safety measures. This applies to a greater extent to homemade devices.

By using various attachments that you can make yourself, you can use an angle grinder to perform a large number of technological processes.

Manufacture various devices For an angle grinder, doing it yourself is not as difficult as it might seem at first glance. All you need to do is buy everything necessary tools and materials, as well as familiarize yourself with step-by-step technology manufacturing.

How to make homemade devices for grinders?

Bulgarian is indispensable tool when performing various construction, installation and repair work. the main task of this device is to quickly cut metal or stones. Also, thanks to special attachments, it is able to thoroughly grind the surface of the part, clean it and remove deep and ingrained dirt (often rust). However, in order to expand the scope of application of this device, many purchase and even construct homemade devices for the angle grinder themselves. And today we will look at which devices and attachments are most in demand in construction, and how to make them yourself.

At the moment, there are many different attachments that can significantly expand the scope of use of a simple grinder. These, for example, are:

Attachments for sanding surfaces and removing old paint.
Beds.
Protractors (we'll talk about them at the end of the article).

It is worth noting that most owners still prefer to buy ready-made attachments in a store rather than making them themselves. They are not that expensive, and they are not at all difficult to find. But some craftsmen make these devices with their own hands. Read more about this below.

How to make homemade tools for an angle grinder? Preparing the tools

To perform this work you will need the following devices:

electric drill with a set of drills;
screwdriver;
wood hacksaw;
discs for grinders with a diameter of 125 millimeters.

What materials should be prepared?

You need to purchase wooden blocks (2 pcs.), a metal corner made of duralumin steel and the same plate. You will also need self-tapping screws measuring 3...3.5x169hellip;35 millimeters. In total you need to have 8 such elements.

Let's get started

First, a metal plate is cut out. Next, a corner is made from the duralumin corner. This is not difficult - you just need to make a cutout in the form of a triangle in one of the shelves of the part and bend it at a right angle. IN metal structure the plates must be drilled 6 holes with a diameter of 4 millimeters each. This is necessary to secure the handle, corners and wooden block with self-tapping screws. It is worth noting that each of these holes must have a special recess for the head of the screws.

The handle is fastened to the block using two self-tapping screws. The dimensions of fasteners should be 3x35 millimeters. This way you will get an L-shaped part. All these elements, together with the plate, are then assembled together. In this case, devices for angle grinders are secured with 4 self-tapping screws 3x20 millimeters.

So, the base of the element is already ready. Now you need to install steel corners here. There should be two of them - with dimensions 60×609times;45 and 55×309times;75 millimeters. It is worth noting that the first corner must be straightened from 90 0 to 60 0. If this is not done, such a product will definitely not be attached to the angle grinder. What to do next? After installation steel corners The grinder itself is attached to them. It is connected to the device using its own handle on one side, and on the other - using a bolt and lock nut of the “M9raquo” series; (8x20 millimeters). The latter is needed so that the screw does not unscrew from the device while cutting the material. It is not necessary to install the locknut on the handle, since you will be holding it with your hand. That's it, at this stage the cutting device has been successfully manufactured.

Such devices for angle grinders are used to facilitate the effort exerted by the operator to perform cutting work. Agree, holding a bulky grinder suspended for several hours in a row is quite difficult. For this reason, many craftsmen make special beds that allow cutting metal and products almost with one hand.

How to make such a device for an angle grinder with your own hands? First you need to make a wooden box. It is enough to make only one side for fastening the grinder. All other walls are removed and legs are attached in their place.

But for such an angle grinder to be truly effective, you must first adapt it to new “living conditions.” What do I need to do? First you need to remove the tool guard. Next, the disc is put on the grinder. When it rests against the side wall of the tool, you should mark where the slot was made for the movement of the nozzle or disk. It should not be too wide (the distance is to prevent foreign objects from getting inside the device). However, the gap can be widened. This is done in cases where there is a need to quickly replace nozzles without disassembling the entire structure. Two can be used as supports wooden bars. That's it, now you can safely start cutting various materials and products.

About the protractor

The protractor is the most important tool when performing construction and installation work. These devices for grinders are indispensable when processing and cutting light metal profiles. Using such a tool allows you to high accuracy calculate the cutting angle of the part, which is best reflected in the quality of the work performed. In addition to metal profiles, this tool is also widely in demand when processing tiles, flooring and baseboards. A homemade protractor is an excellent alternative to bulky and expensive tools, which are also called specialized ones. Perhaps in industrial scale benefits from homemade equipment it won’t, but such an element will definitely be indispensable in the household.

The principle of its operation is as follows:

First, the tile (or other material to be cut) is placed on a guide angle with an anti-friction lining. The latter has high anti-slip properties, which prevents the part from moving on the device.
Next, the workpiece is pressed tightly against the corner flanges, after which the operator sets the desired cutting angle.
Then the cutting of the material begins. Here it is worth considering that to cut you just need to press the disk a little - extra effort in this case there is no need.

Design

Structurally, these devices for grinders consist of the following parts:

clamp corner;
loops;
fixing bolt;
main parts.

Unfortunately, such attachments for an angle grinder cannot be made with your own hands, which is explained by their complex design. Therefore, it is best to buy such protractors in specialized stores.

20 photos of cats taken at the right moment Cats are amazing creatures, and perhaps everyone knows about this. They are also incredibly photogenic and always know how to find themselves in right time in rules

What does your nose shape say about your personality? Many experts believe that you can tell a lot about a person's personality by looking at their nose. Therefore, when you first meet, pay attention to the stranger’s nose.

How to look younger: the best haircuts for those over 30, 40, 50, 60 Girls in their 20s don’t worry about the shape and length of their hair. It seems that youth is created for experiments with appearance and daring curls. However, already last.

Why do you need a tiny pocket on jeans? Everyone knows that there is a tiny pocket on jeans, but few have thought about why it might be needed. Interestingly, it was originally a place for storage.

These 10 little things a man always notices in a woman Do you think your man doesn’t understand anything about female psychology? This is wrong. Not a single little thing can be hidden from the gaze of a partner who loves you. And here are 10 things.

What is it like to be a virgin at 30? I wonder what it’s like for women who didn’t have sex until almost middle age.

What accessories for an angle grinder can you make with your own hands?

Widely known corner Grinder with its ability to cut, grind and clean, it turned out to be capable of several more functions. Expansion of functionality requires certain work with your own hands to get the necessary equipment for the job.

Stand for grinder + (Video)

This device is a small machine that makes cutting easy, safe and very precise. metal pipes, profiles or rods. It consists of a base or small table attached to the ground or to a bench.

The machine is assembled in a simple sequence:

install a hinge on the base;
We weld the supporting pipe to the hinge;
We attach the U-shaped plate for attaching the grinder to the pipe;
We put a rubber handle on the supporting pipe;
install the disk and check its position.

As a result easy work We have a machine or stand for an angle grinder. Now the grinder can rise and fall down on a hinge onto the part installed for cutting. In order for the angle grinder to rise up without loads, we install a spring on the pipe.

It is necessary to install two fixing angles on the table. At the base of one corner we make a groove around the circumference for a bolt. It will be needed when a pipe or profile needs to be cut at a certain angle. Then we install this corner with a slot at the same angle to the plane of the grinder’s cutting disc.

Parallel to the corner with the arc slot, we install a corner that can be moved towards the part to fix it on the table. The pipe or profile will simply be inserted between two corners. This is enough to perform fast and precise cuts.

By installing a supporting transverse metal bar on the machine table, you can strip the material using a steel brush mounted on the angle grinder shaft.

Simple cutting machine + (Video)

You can make a cutting machine based on an angle grinder yourself in one day. For the machine it is necessary to select a frame - a metal base plate. Attach the hinge to it. Weld a supporting frame with a plate for attaching the grinder to the hinge.

Any suitable part can be used as a hinge. In this case, the joint is made from car swivel joints. The hinges have already served their purpose, but they fit the machine very well.

Do-it-yourself wall chaser from an angle grinder + (Video)

A groove is a groove that must be cut in the wall for installation electric wire or cable. The difficulty of this work is that the groove must be of constant width and depth. Then the wire will be laid evenly and less mortar will be required for laying.

A wall chaser is rarely used in practice, so buying one for your home will be expensive. But it can be made on the basis of an angle grinder - our favorite grinder.

The main task is to install two diamond blade on the angle grinder shaft with a distance of at least 1 cm:

install the first disk and secure it with a nut;
install the second disk and secure it with a nut;
measure the resulting distance between the disks;
install protection on the grinder;
checking the work.

But, if for some reason it is not possible to install two disks on the shaft, the groove can be cut using the usual method with one installed disk. You'll just have to cut a second parallel line.

Work with a wall chaser is carried out indoors. This creates a huge amount of dust. Even a respirator can't save you from it. To eliminate this negative phenomenon, it is necessary to make a protective casing that would cover both disks and have a pipe on top for connecting to a vacuum cleaner. A similar device is available on electric jigsaws for collecting small sawdust.
Sometimes there are amateurs to this casing rational use The tool is equipped with 2 or 4 rotating rollers. When the wall chaser moves along the surface of the wall, it will move on rollers without creating additional stress on your hands.

To make a tool for a wide groove, it is necessary to make special bushings to mount the disks to the desired width. With such a wall chaser it will be possible to make grooves for laying pipes.

But the protective casing will also need to be made wider. It is necessary to install an immersion adjustment screw on the wall chaser casing for both wires and pipes cutting tool into the wall. In this case, the casing will consist of two parts connected by a hinge and a immersion adjustment unit.

Grinder milling cutter + (Video)

Sometimes there is a need to mill a hole or surface, but there is no familiar milling machine operator, and there is nowhere to look. But there is an angle grinder - an angle grinder. This is the solution to the problem. We choose a machine from two options - a movable machine and a movable table.

In the first case, we secure the workpiece or material that needs to be milled, and the grinder is attached in a vertical plane to the frame. On the frame it is possible to move the plate to which the grinder is attached left - right and forward - back. In other words, we can move the angle grinder relative to the workpiece.

In another version, the grinder is fixed rigidly, and the workpiece moves, by analogy, left - right and forward - back. These are the main directions for milling. For milling along the up-down axes, it will not be difficult to supplement the device.

Having chosen the machine option, you can begin implementation. The only place, which will require the involvement of a turner - a cutter holder. It is turned from a hexagon of at least 16 mm, because the thread of the grinder is 14 mm. Collet type holder. It is easy to manufacture and does not have large runouts. A regular jaw chuck does a worse job.

The advantage of such a machine, like all machines based on an angle grinder, is that they can easily be transformed back into an angle grinder. As a type of milling cutter, you can make a drill from a grinder.

Pendulum saw + (Video)

It’s not difficult to make accessories for an angle grinder with your own hands. You don't even need drawings here. It is enough to know the principle that is embedded in a particular machine. A pendulum saw based on a grinder is no exception. This is the same cutting machine, but its weight is distributed almost in half.

It is somewhat similar to a children's swing. A frame is located on a movable bushing, and an angle grinder is mounted on it. The counterweight can be any weight in combination with a return spring.

If you want to make accessories for an angle grinder with your own hands, the drawings will be very useful to you. With their help, you can assemble all kinds of homemade designs, the main task of which is to expand functionality, increasing safety and simplifying the operation of the angle grinder.

Working with an angle grinder, this power tool allows you to perform three main operations:

Cut hard materials;
Grind the surfaces of products with abrasive wheels;
Clean surfaces with special brushes.

We offer you a way out of the situation - a device that will make the grinder stationary. Various types of adaptations allow you to make a full-fledged machine with expanded capabilities from an angle grinder.

Available accessories for grinders

Fixture drawing

Let's look at the devices that you can actually make from an angle grinder with your own hands. You will need assembly instructions, useful recommendations and video guides.

We offer the following accessories available for assembly for your angle grinder:

Tripods;
Fasteners;
Miter box;
Milling cutters;
Wall chasers;
Design for cutting porcelain stoneware;
Culinary device.

Now every submitted homemade device Let's look at it separately. Let's find out how you can make this or that design and improve your angle grinder (angle grinder) with it.

Tripod

The tripod makes the difference main problem grinders - the need to hold it with your own hands, while there is no one to install the workpiece.
If you make a tripod, you can hold the grinder with one hand, and hold and move the workpiece with the other.
Using tripods, the cutting angles of the grinder are set, while the disk moves strictly vertically. This device improves the quality of processing and reduces the risk of injury.
To make a tripod, use metallic profile, car shock absorbers or ordinary plywood.
If you make the device correctly, the angle grinder will turn out to be an excellent stationary installation with a level of reliability and safety equal to factory tripods.
An important element of a tripod is the protective casing. If it is available, you can place wood on the workbench, work on wood, metal, and plastic.
Using a tripod, you can protect yourself from the main causes of injury when working with an angle grinder - an angle grinder falling out of your hands or a jammed disk when working on wood.
When making a tripod, it is recommended to convert the power button into a pedal type regulator. This will allow you to quickly turn off the power by releasing your foot from the pedal of the device.
On average, a tripod can be made in an hour if you use simple drawings. They are not much inferior to factory tripods, but in financially are almost free.

Retainer

A retainer or holder is the next most popular element that allows you to make a functional device out of an angle grinder;
The purpose of the latch is to secure the power tool. This is how you get a stationary saw;
The clamp performs fastening on the required surface - table, workbench, vice;
This mount has an important advantage - you can remove the holder at any time, returning the power tool back to manual operation mode;
A stop with a special slot can be installed across the disk. This addition allows you to process high-strength parts while holding the workpiece with your own hands;
The most popular clamp is a sawmill from an angle grinder. To make it, you will need a high-quality frame under which the angle grinder is fixed. In just a few hours, the grinder turns into a full-fledged sawmill, which can be quickly disassembled as needed.

Miter box

By making the work table under the angle grinder rotary, you will get an excellent device - a miter box.
Miter box for electric grinder allows you to work on wood, cut skirting boards, profiles, baguettes, and wooden blanks at an adjustable angle.
For these purposes, you need to install the required disk on the grinder and fix the work table at an angle of 45 degrees.
This is an incredibly convenient unit for those who need to cut large quantities window casings, glazing beads, skirting boards, etc.
A miter box in combination with a grinder facilitates slicing paving slabs in a diagonal direction. This will allow you to diversify the options for laying the material.
Miter boxes for grinders are manufactured by factories, but the cost of such units is unreasonably high. Therefore, a homemade device is much preferable for working at home.

Wall chasers and milling cutters

Wall chaser. The grinder can be used as a wall chaser, which requires laying electrical wiring or cutting passages in the wall. By holding an angle grinder, you greatly risk your health and the quality of the work performed. For such purposes, there is a special device - a nozzle on solid foundation. It is a support sole that facilitates smooth movement of the tool along the wall, while creating uniform force. Be sure to make a case closed type. It would be a good idea to equip the device with a pipe through which the vacuum cleaner is connected;
Fraser. This device is possible to implement, since most angle grinders are equipped with a gearbox and a powerful electric motor. To make a similar design, you need to bring the angle grinder shaft into the hole assembled workbench, put on the cartridge milling head and the device is ready for use. This device is designed for woodworking. But cutting too hard rocks is not recommended.

Porcelain stoneware processing

Working with stone is a responsible thing, accompanied by certain difficulties and risks.
If you tilt the grinder disc incorrectly, you can easily damage the porcelain tiles. Its cost is already not small enough to allow such a defect.
Another situation is the splitting of the machine saw blade itself.
The purpose of this device is to control the angle of entry into porcelain tiles and ensure straight-line movement of the power tool.
To automate the processing of porcelain stoneware, drawings of special devices with guides have been developed. Assembling them with your own hands is not so easy, but it is possible.
The main feature is the guides along which the grinder moves with enviable precision, ensuring an even and neat cut.

culinary device

How can cooking and an angle grinder be related? In the most direct way.

Using a grinder and available materials, you can get an excellent homemade mill or coffee grinder. The build process looks like this:

Take a two-liter jar made of tin;
Arm yourself with a strip of galvanized steel;
Make a hole at the bottom of the jar, the diameter of which is equal to the diameter of the protective casing;
Remove the casing and disk, and in their place pass the shaft through the hole;
A piece of galvanized steel is placed on the grinder shaft, matching the described radius inside the can;
The galvanized sheet is screwed with a nut to the angle grinder shaft;
Pour grain or coffee inside the jar, close it and turn on the angle grinder. The flour or coffee is ready for brewing.

Making your own devices is not difficult. You just decide which version of the device you need.

The well-known angle grinder, with its cutting, grinding and cleaning capabilities, has turned out to be capable of several more functions. Expanding the functionality requires doing some work with your own hands in order to obtain the necessary devices for the job.

This device is a small machine with which you can easily, safely and very accurately cut metal pipes, profiles or rods. It consists of a base or small table attached to the ground or to a metalworking table.

The machine is assembled in a simple sequence:

install a hinge on the base;
We weld the supporting pipe to the hinge;
We attach the U-shaped plate for attaching the grinder to the pipe;
We put a rubber handle on the supporting pipe;
install the disk and check its position.

As a result of some simple work, we got a machine or stand for an angle grinder. Now the grinder can rise and fall down on a hinge onto the part installed for cutting. In order for the angle grinder to rise up without loads, we install a spring on the pipe.

By installing a supporting transverse metal bar on the machine table, you can strip the material using a steel brush mounted on the angle grinder shaft.

Simple cutting machine + (Video)

Any suitable part can be used as a hinge. In this case, the joint is made from car swivel joints. The hinges have already served their purpose, but they fit the machine very well.

Do-it-yourself wall chaser from an angle grinder + (Video)

A groove is a groove that must be cut in the wall for laying an electrical wire or cable. The difficulty of this work is that the groove must be of constant width and depth. Then the wire will be laid evenly and less mortar will be required for laying.

A wall chaser is rarely used in practice, so buying one for your home will be expensive. But it can be made on the basis of an angle grinder - our favorite grinder.

The main task is to install two diamond discs on the angle grinder shaft with a distance of at least 1 cm:

install the first disk and secure it with a nut;
install the second disk and secure it with a nut;
measure the resulting distance between the disks;
install protection on the grinder;
checking the work.

But, if for some reason it is not possible to install two disks on the shaft, the groove can be cut using the usual method with one installed disk. You'll just have to cut a second parallel line.

Work with a wall chaser is carried out indoors. This creates a huge amount of dust. Even a respirator can't save you from it. To eliminate this negative phenomenon, it is necessary to make a protective casing that would cover both disks and have a pipe on top for connecting to a vacuum cleaner. A similar device is found on electric jigsaws for collecting small sawdust.
Sometimes lovers of rational use of tools attach 2 or 4 rotating rollers to this casing. When the wall chaser moves along the surface of the wall, it will move on rollers without creating additional stress on your hands.

To make a tool for a wide groove, it is necessary to make special bushings to mount the disks to the desired width. With such a wall chaser it will be possible to make grooves for laying pipes.

But the protective casing will also need to be made wider. On the wall chaser casing for both wires and pipes, it is necessary to install a screw for adjusting the immersion of the cutting tool into the wall. In this case, the casing will consist of two parts connected by a hinge and a immersion adjustment unit.

Grinder milling cutter + (Video)

Having chosen the machine option, you can begin implementation. The only place that will require the involvement of a turner is the cutter holder. It is turned from a hexagon of at least 16 mm, because the thread of the grinder is 14 mm. Collet type holder. It is easy to manufacture and does not have large runouts. A regular jaw chuck does a worse job.

Pendulum saw + (Video)

It is somewhat similar to a children's swing. A frame is located on a movable bushing, and an angle grinder is mounted on it. The counterweight can be any weight in combination with a return spring.