Any good housewife knows that a clean toilet is the main indicator of the sanitary cleanliness of a home. Contaminants such as limescale cannot always be easily removed. But it is precisely this yellowish layer that makes the toilet especially untidy. How to return your “faience friend” to its original appearance?

How can you clean a toilet from limescale?

Various minerals and lime present in the water linger on the surface of the toilet in the form of a characteristic coating. The hardness of the water determines the speed of its occurrence - the higher it is, the faster the layering occurs. The process can take from several weeks to months. Removing a thin layer of lime is possible with conventional toilet cleaning products, which are applied to its entire internal surface and left overnight, after which the deposits are cleaned off with a brush and washed off with water.

Before applying any product, you must completely remove water from the toilet bowl and the visible part of the drain. This can be done using a plunger, any narrow container with a handle, or by absorbing it with a rag.

There are many special products that can dissolve layering - Domestos, Toilet duckling, Santry and others. Their cost varies from quite cheap to very expensive. With their help, plaque can be dissolved very quickly without labor-intensive processes. Therefore, if you are not allergic to these products, then they can be used in cases of severe plaque that does not respond to folk remedies. To use factory products:

• read the instructions carefully;
• put on rubber gloves;
• remove all liquid from the toilet drain, dry the surface with a rag;
• apply the product;
• leave it for the time specified in the instructions;
• clean the plaque with a brush;
• close the toilet lid and flush the product.

A colored toilet can be cleaned with the same products as a white one, but any abrasives will leave noticeable scratches on it.

Toilet duck and other industrial products are good at removing plaque and unpleasant odors from the surface of the toilet bowl

If you want the toilet to retain its original appearance for a long time, take preventive measures. They will help prevent plaque from occurring. And if it appears, first try some proven folk remedies, including:

• baking soda;
• vinegar;
• citric acid;
• Coca-Cola;
• Whiteness, etc.

Ways to get rid of limescale deposits on the toilet

Factory and folk remedies differ in price and composition, but they are all based on three active ingredients: alkali, acid and abrasive.

1. The best way to remove minor lime deposits is with such irreplaceable products as citric acid, vinegar and chlorine in the form of bleach. These products can be reused if they do not work the first time. It should be taken into account that all traditional methods They do not act as quickly as store-bought ones and require considerable effort.
2. If the plaque has accumulated over many months and does not respond to specialized drugs, all hope remains for potent drugs. Among them are oxalic acid and electrolyte.

There are also some effective non-traditional remedies, for example, Coca-Cola.

Coca-Cola is not only tasty, but also effective in cleaning the toilet from limescale.

How to use citric acid

1. Take 2–3 sachets citric acid.
2. Apply the substance to problem areas.
3. Close the toilet lid and wait 3 hours.
4. Work well with a brush and rinse with water.

How to remove limescale with Coca-Cola and citric acid - video

Step-by-step instructions for cleaning a toilet with vinegar

To clean the toilet with this product you will need:

• 1 glass of 9 percent vinegar;
• 2 tsp. baking soda.

Operating procedure:

• Pour vinegar into a saucepan.
• Heat the liquid to approximately 40 °C.
• Add soda.
• Pour the sizzling solution onto the lime-covered areas.
• After 8 hours, wash off the mixture along with the plaque with warm water.

Using products available in every kitchen, you can effectively remove limescale from the surface of the toilet bowl

How to clean a toilet from heavy limescale with vinegar - video

How to use Whiteness correctly

1. Dry the inside of the toilet with a rag and absorb water from the drain.
2. Fill the bottle with Whiteness and do not use the toilet for 12 hours, but be sure to close it with a lid so that harmful fumes remain inside.
3. When the plaque softens, immediately rinse off the product with water and then clean the toilet.

The easiest way to clean a toilet from plaque - video

Features of cleaning the tank, lid and toilet seat

To clean the tank, first close it water tap, and then drain the water from the device. You should use a neutral product without acids, which can destroy rubber and plastic elements. To prevent plaque, special hard plates should be attached to the wall of the tank. To clean the toilet seat and lid, select detergent with a minimum of alkalis, acids or chlorine, because residues of aggressive substances can cause a chemical burn on the skin when using the toilet.

Removing plaque with oxalic acid

The substance in the form of a dry powder can be purchased at a hardware store. It belongs to carboxylic acids and has moderate toxicity. The exposure time of the substance must be strictly observed so that it does not have time to corrode the enamel. However, this acid provides impeccable whiteness of the toilet bowl, even if it is not used for pure form, but as part of any funds. Before using them, you should carefully study the instructions for use and take all safety precautions specified therein. In particular, be sure to wear thick rubber gloves.

1. Take a piece of cloth and dampen it.
2. Pour the powder onto a cloth and wipe all areas with limescale formation (to clean the drain, the powder is dissolved in the water remaining in it).
3. Wait one hour.
4. Use a brush and water to clean off the deposits.

An effective way to clean stubborn limescale is to use oxalic acid in its pure form or products based on it.

Electrolyte for toilet cleaning

Battery electrolyte is one of the most effective, but at the same time the most dangerous means for getting rid of limescale, since it can leave chemical burns. To use it, get all the personal protective equipment - a rubberized apron, a respirator, safety glasses, thick rubber gloves.

1. Pour the electrolyte very carefully onto areas with lime deposits, avoiding splashing of the product.
2. Close the toilet lid and wait 15 minutes.
3. Wash off the electrolyte along with the deposits with plenty of water.

Electrolyte - effective, but dangerous drug for removing limescale

Possible mistakes when cleaning toilets - table

Wrong actions	Their consequences
acid-based cleaning agent is left on the earthenware longer than necessary	destruction of enamel and, as a result, it is much more difficult to remove dirt from such a toilet, since they eat into the earthenware
flushing water after cleaning with an aggressive agent with the toilet lid open	spray active substance may come into contact with skin or eyes, resulting in chemical burns
cleaning the toilet without protective equipment	allergic skin reactions and chemical burns
the use of acid and electrolyte based products if metal-plastic pipes are installed	pipes may partially dissolve and leak
lean over the toilet when cleaning it	there is a risk of inhaling harmful fumes

What to do to prevent limescale from accumulating: preventive measures

With limescale, as in many other cases, sometimes it is better to avoid the problem than to solve it. To prevent build-up on your sanitary device, follow these steps:

• clean with special non-aggressive means at least once a week: the frequency is determined by the number of people who use the toilet;
• Always after use it is necessary to drain the water and clean it with a brush if necessary;
• repair a leaking tank in a timely manner to avoid leaks and at the same time save on water bills;
• It is important to use special tablets or anti-plaque agents, which over time remove a layer of lime and at the same time resist the formation of a new layer;
• Place oil-free wet wipes next to the toilet, which do a good job of cleaning the seat and the outside of the toilet, but do not throw them down the drain, as this can lead to a blockage.

Getting rid of limescale is a very real task, although problematic. To solve it, factory and folk remedies are used. But it is better to clean the toilet regularly than to then suffer from peeling off the lime layer.

Quite often you have to deal with such a problem as urinary stone on the surface of the toilet. What to do in such a situation, and how to clean the toilet from urinary stone? You can use both folk remedies and those specially designed for this purpose. chemical compositions created in industrial conditions.

You can clean the inside of the toilet using bleach and vinegar. It is worth noting that the most proven and oldest product is considered the good old white, which is used for washing, bleaching things and for caring for various surfaces. Before treating the surface, you need to dry it as much as possible from moisture and water, for which an ordinary rag will do.

After this:

• Whiteness pours into the places where the stone is formed;
• Then leave for at least 12 hours;
• As soon as this period ends, the toilet needs to be cleaned with a brush and rinsed with water.

The result will surprise even a cleaning service specialist. As for cleaning the toilet with vinegar, it can indeed effectively remove urinary stones, but this requires a whole glass of this composition.

It is poured into a container, for example a pan, and heated to 40 ᵒC.

Then baking soda is sent there, and everything needs to be mixed as thoroughly as possible. The solution is applied to problem areas in the toilet and left for 8 hours, after which it is washed off. This is a fairly good toilet cleaner that can clean even old stone formations.

Instructions: how to clean the inside of the toilet from urinary stones

To remove stone from the surface of the toilet, you need to choose not only the means, but also follow the recommendations of experts in this field. The most important thing is to protect the skin on your hands with gloves before starting work.

Aggressive chemicals can cause:

• Allergic reaction;
• Formation of severe ulcers;
• Ozhegov.

Even if the stone is formed only on part of the toilet, then all the equipment inside must be treated, otherwise the problem will reoccur.

That is why you need to do it before cleaning the toilet. complete drainage, for which you need to remove water even from the pipe, for which a plastic cup is suitable.

For effective removal dirt from the walls of the toilet, you will need to read the instructions for the product that will be used. The product must be kept on the surface of the toilet for as long as the manufacturer advises, otherwise the enamel surface can be corroded.

How and how to remove urinary stone from plastic

If the choice falls on vinegar, then you need to choose vinegar essence, as it is more effective. A rag is moistened with it and applied to a dried surface for several hours. It is quite possible to use vinegar at 9%, but it is better to heat it to a temperature of 40 ᵒC and mix it with baking soda, which will significantly improve the effect. The prepared solution is poured onto the problem area and left overnight.

Other ways to clean stone from plastic:

• Citric acid;
• Baking soda;
• Soda.

Baking soda in its pure form is not a particularly ideal solution for removing stains on a toilet or any other plastic surface. If you want to use this particular product, you need to use a large dose, in particular a whole pack, pour it onto the toilet and leave it overnight.

Citric acid is considered an affordable and budget-friendly remedy, since it is inexpensive and can be found in almost every home.

It is enough to pour the contents of a couple of bags into the toilet and leave for 10 hours. If the layer of composition is much thicker, then less time will be needed. If the case is very advanced, then much more acid is needed. Few people know that you can clean the toilet from urinary stones using the well-known Coca-Cola. It contains citric acid in large quantities, and therefore if you pour several bottles into the toilet and wait a while, you can get a high-quality result.

The benefits of hydrochloric acid for cleaning toilets

Did the usual means fail? You can use a number of other compounds - hydrochloric acid, battery electrolyte, phosphoric acid, chlorine or well-known brand cleaners. Naturally, chemical compounds can cope with the most neglected means, however, when using them, you must follow special instructions from the manufacturer.

• Gloves;
• Respirator;
• Headscarves;
• Sleeves, if we are talking about using a spray.

It is especially important to use protective equipment if hydrochloric acid is used, since it can corrode not only urinary stones, but also the skin. It is strictly forbidden to use acid if the pipes are made of plastic.

In terms of power, there is a product comparable to hydrochloric acid, and this is battery electrolyte.

It has a liquid state and allows you to eliminate even the most stubborn plaque. The only thing that can be noted as special instructions is that it is strictly not advisable to use the products if the pipes are not made of a durable material such as metal. Phosphoric acid is an effective and inexpensive product that will perfectly help cope with a large number of old mineral deposits. As for volume, only 100 g of solution is enough. It is applied to the walls of the toilet and left for 20 minutes. Chlorine is an equally effective and affordable remedy. Some compare its effect to whiteness, but it can cause significant harm to health. It is much safer to use white, since it will not harm either health or the equipment itself.

As for the remedies from the multitude famous brands, then there are an incredible number of them, and you can select them by:

• To the manufacturer;
• Composition;
• Power or efficiency;
• Price;
• State, such as powder, liquid or gel.

Most often, such compositions are made on the basis of hydrochloric acid, but only in limited quantities, and therefore you should carefully follow all the recommendations from a specialist so as not to harm the equipment or your health. It is worth noting that it is strictly not advisable to use strong abrasive substances, as this may negatively affect the integrity of the toilet bowl coating. There are a number of special tablets that are placed in a barrel where they dissolve. They can cope, but only gradually, with various deposits, as well as prevent their formation.

Remedies: how to clean a toilet from urinary stones (video)

Before choosing a product, you need to read the recommendations from the manufacturer, as well as how to use them and for what surfaces. This will prevent damage to property and, in particular, harm to health.

Keeping the restroom clean requires significant effort and time. What to do if the inside of the toilet becomes dirty over time? yellow plaque, the so-called urinary stone? These are hydrochloric acids formed by the combination of limescale deposits and urine, which combine and settle at the bottom of the toilet. This cannot be done without additional means of combat. How to clean a toilet from urinary stone?

Contents of the article: 1. 2. 3.

Reasons for the formation of limescale on the toilet

Unfortunately, a yellow coating does not always indicate carelessness of the owners. Even with constant proper care Over time, microcracks appear on the special glaze coating.

Reasons for education limescale some:

• Damage to the glaze on the toilet. Rapid wear is promoted by cleaning the surface with metal-containing sponges and scratching abrasives;

• Lime deposits clog into microcracks that form when hot water is regularly flushed into the toilet;

• The water contains minerals. The more water leaks out of the tank, the more deposits will appear on the walls of the toilet;

• Insufficient flushing with water after using the toilet;

• Irregular prevention of plaque and stone formation.

Methods for cleaning a toilet from urinary stones

There are many ways to clean the toilet from urinary stones and dirt, but, of course, the cheapest, but no less effective, are folk remedies. Which method to use depends on the degree of contamination of the inner walls of the toilet and the thickness of the urinary stone deposits below where the water is located. It is unlikely that you will get a brilliant result from the first cleaning, but in a few times you can deal with the most stubborn stones.

It is sometimes possible to effectively clean a toilet only with the help of acids. Do not try to remove limescale deposits with a knife or sharp object; this is useless and will certainly damage the integrity of the glaze. Be sure to use thick rubber or latex gloves.

Toilet before and after cleaning urinary stones

Folk remedies

Folk remedies for cleaning the toilet from urinary stone contaminants are cheaper, but no less effective:

White

A popular remedy for removing urinary stones. Using a plunger, remove water from the toilet. Pour the bottle of white over the walls, covering the inner surface. Close the lid and leave overnight. To eliminate chloride fumes, throw a rag on top.

In the morning, rub it with a brush and wash it off several times. If the stone is old, then we will perform this operation several times. But whiteness most likely will not be able to dissolve very old stones.

Vinegar

To clean brown deposits that are not very old, you can use vinegar. Heat half a bottle of 9% vinegar in a closed metal container to 40 degrees. Pour it over the walls into the toilet; for greater effect, first sprinkle the inner surfaces with soda. A glass of soda is enough. Leave the mixture overnight and wash it off in the morning.

It is necessary to rub the softened stone with a hard sponge. If you have 70% vinegar essence, then mix 100 grams with iodine in equal parts and pour overnight.

Citric acid

Citric acid will help to effectively clean the toilet from urinary stones. Pour two sachets into the toilet water, leave for at least 2 hours, or better yet overnight, and rinse clean water, then rub the dirt with an abrasive sponge or brush and wash it off again. The effect can be enhanced with soda.

It is advisable to repeat the procedure several times. The thicker the layer of plaque and stone, the more bags you need to pour into the toilet.

Soda

Fresh stains can be removed using baking soda alone. She can quite cope with softening urinary stones. The main thing here is long-term interaction with problematic surfaces. Sprinkle a pack of baking soda onto the wet walls and into the water and leave overnight. In the morning, rub the stained areas and rinse with water.

Oxalic acid

It is better to remove older stones and many years of limescale with oxalic acid. Technical oxalic acid is sold in small packages. Pour a little acid onto a damp cloth and rub the urinary stone directly. Leave for a couple of hours, scrub with a brush and then rinse.

You can also pour a packet of oxalic acid into the toilet for a short time, a maximum of an hour. Then rub and rinse thoroughly with water. Be sure to wear gloves when working with acids.

HCl

If you have access to hydrochloric acid, you can, with all precautions, wipe particularly old stones with it, but only if other methods have not helped. After an hour, rinse with several waters.

Automotive electrolyte

The most drastic method for clearing a toilet from urinary stones is used when the issue is pressing and other methods have not satisfied you. This is cleaning using automotive electrolyte.

In addition to special gloves, safety glasses are required, and it is advisable to send family members for a walk, since electrolyte vapors are dangerous to the respiratory tract. In addition, its use is permissible if you only have metal pipes, including wiring.

Pour electrolyte into the toilet, close the lid and place cellophane on top. After two hours, rinse the toilet repeatedly with water and only then open the lid.

Cola

And Coca-Cola can also help you in this noble cause. High content citric acid in the drink will eat away fresh deposits in a short time. Pour two liters into the toilet, wait a few hours and polish until shiny with a brush or hard sponge.

Cleaning the toilet with cola

Household chemicals for cleaning the toilet from urinary stones

If you trust household chemicals more, then the best helpers in the fight against urinary stones will be products containing a high concentration of formic or hydrochloric acids. Together with limescale and urinary stones, such household chemicals will also cope with rusty stains. Products containing sodium salts of sulfate or carbonate and anionic surfactants (A-surfactants) are also effective.

Everything should be used only according to the instructions in the instructions and always wearing gloves that will protect you from aggressive acids and components. When choosing household chemicals, it is necessary to take into account the thickness of the liquid.

Manufacturers offer the following effective products to remove dirt and urinary stones:

• "Toilet Duckling Active" is a product of the Johnson company and is based on hydrochloric acid. Enough effective remedy to remove old dirt.

• The Domestos line contains a specially created drug for removing urinary stones. Domestos Pink is sold in a black container and is not diluted when used. Removes only fresh dirt and stones.

• The curved spout of Silita allows you to apply the product under the rim on the inner walls of the toilet. It contains hydrochloric and other strong acids. "Silit" is considered the most effective household chemically clean the toilet from urinary stones.

• Mister Muscle in granules, which destroys especially old stones, may also be useful to you. Cover the most contaminated parts of the toilet with granules for three hours. Rinse off with plenty of water.

When using these cleaning products, you must remove the water from the toilet using a plunger or by emptying it completely. Pour in the chosen product and leave for four hours.

If the gel-like product is runny and drains quickly internal surfaces toilet, top up periodically. Take a brush or a stiff sponge and remove the softened dirt.

Rinse with water several times and see how much the urinary stone has dissolved. If some of the dirt remains, repeat until it disappears completely.

Prevention of urinary stones on the toilet

If you don't clean your toilet weekly, after a few years you will have a difficult and grueling job of removing limescale and urinary stones.

There are several rules that allow you to maintain your toilet for a long time without general cleaning:

• Adjust the drain and prevent water leakage. It is this problem that primarily leads to the appearance of limescale. Use tablets for the cistern.

• Rinse off with plenty of water;

• Keep the toilet clean at all times, as it is known that a rough, contaminated surface accelerates the formation of new deposits:

• Clean the toilet weekly with a sponge and cleaning products.

And may you be rewarded for your tireless work with a sparkling white, well-groomed toilet.

When we come to visit someone, we find ourselves in the hallway. She is considered business card housing. But this is only partly true. At first glance, it is this room that indicates whether the owners of the apartment are clean. But if you get into the bathroom or toilet, the opinion about the apartment’s residents can change dramatically. And not always for the better.

Not everyone can boast of a sparkling and clean toilet, and the blackness of the knee ruins the whole look. How to make your toilet clean and shiny? Naturally, Domestos and Toilet Duck can perform this task well, but only if they are used regularly. In order to prevent the formation of stone deposits, you should clean the toilet at least once every seven days. To maintain cleanliness, it should be wiped with an abrasive sponge dipped in powder and warm water.

For softening water and aromatizing air in toilet room, it is necessary to use specially created means. They are placed in the tank or attached to the rim of the toilet.
If you need to clean the place where the water in the toilet stagnates, you need to use a plunger and a disposable cup, remove the water, pour in the cleaning product and let it sit for about an hour. When liquid cleaning agents are used, they should be topped up. After that, use a non-metallic object to remove all dirt from the edges, and then throw the object away. When the dirt and impurities are removed, you can use a brush and then wash everything off.

But sometimes radical methods are needed for cleaning. Especially when a very thick coating and urinary stone have formed in the toilet, and it’s impossible to remove everything with a sponge. Let's look at more radical cleaning methods in detail.

Cleaning the toilet with vinegar

When cleaning the toilet regularly, ordinary vinegar will do to get rid of limescale. Can also be used apple cider vinegar. 70 percent vinegar is ideal, but 9% is also suitable.

You should pour a glass of vinegar into a saucepan or any container and heat it. To avoid a strong odor, the container should first be covered with a lid. Next, warm vinegar is poured into the toilet and soda and iodine are added. Leave on for two or three hours and then wash off. It is better to carry out this cleaning method before going to bed. The stone should disappear overnight. If the effect does not live up to expectations, you should carry out the cleaning procedure a couple of times.

The second method is based on whiteness. The first step is to remove the water from the toilet. And then pour a bottle of whiteness into it. It is better to carry out this procedure at night. Leave everything overnight and wash it off in the morning. You can apply this method several times until the result is desired.

Citric acid is also used to clean the toilet from plaque and stone. You need to pour a couple of packets of acid into the toilet, close the lid and leave for several hours so that the plaque dissolves. And remove with a brush and water. Repeat several times. Until the result is great.

But these methods will not help if the toilet is very dirty.

How to remove the most from the toilet heavy pollution?

If the toilet is old, and the owners haven’t cleaned the plaque and dirt for a long time, then usual ways Cleaning won't help. In this case, you must use one of the following options.

Technical oxalic acid will help remove the most severe stains from the toilet. It can be purchased in dry form at the pharmacy. When using it, you should wear gloves. You need to wet a rag and add a little acid, and rub the areas where there is a lot of stone. You can just pour it into the toilet. Leave for an hour and clean with a brush.

Effective cleaning with battery electrolyte

Using electrolyte to clean the toilet is effective option. You have to be very careful. To work, you will need to wear gloves, clothing, goggles, and, if possible, a respirator to avoid inhaling fumes. The electrolyte should be poured without splashing. This method can only be used if the toilet is in very poor condition and it is not possible to buy a new one. You cannot clean with electrolyte if there are plastic pipes.

Coca-Cola, no matter how funny it may seem, can help clean the toilet. A couple of bottles of cola are enough to pour into the toilet, and after four hours, flush it and clean it until it shines with a brush.

There are many methods of cleansing. You can choose the most suitable one. It all depends on the condition of the toilet. It's very simple. Products that are specially created for this purpose clean the toilet well. But in reality, not all means will be able to cope with the oldest plaque.

How to clean with home remedies

But such products do an excellent job of disinfection and constant cleaning. Therefore, it is better to monitor cleanliness regularly than to later look for electrolyte to clean the pipeline.

After using the toilet for a long time without proper cleaning and cleaning of its walls and rim and drain hole deposits appear in the toilet bowl in the form of urinary stones. This also occurs when the tank is not drained completely or regularly, often in families with small children. As a result, mineral deposits form on the walls and bottom of the toilet. Over time, it only increases, becomes denser, and its thickness increases, which narrows the lumen of the outlet, often leading to blockages and a source of bad smell from the toilet. It will not be possible to remove such a urinary stone using a brush or a more radical means of a cable. Toilet bowl cleaners are more suitable for removing limescale deposits that form due to the high hardness of the water supplied to the water pipes.

As a preventative measure against the formation of urinary stones, we can recommend regular cleaning of the toilet, using special toilet tablets that are thrown in after flushing, and various mounted cleaners. According to the manufacturers of these tablets, they not only color the water, but also eliminate unpleasant odors, cleanse and also protect against the formation of urinary plaque.

Incorrect gaskets also contribute to the formation of limescale and urinary stones. plumbing pipes, defects and microcracks on the toilet itself, defective products.

If you use the toilet incorrectly, you do not flush it completely, pour out fatty liquid soup residues, or pour boiling water, which leads to microcracks and the formation of urinary stones.

Simple folk remedies will help you clean the toilet from urinary stones at home.. To effectively get rid of urinary stones inside where the water stands, you must first remove the water from the water seal.

How to clean a toilet from urinary stone inside where the water sits

To remove water from inside the toilet, you can use an old ladle or a small container with a handle. Put on rubber gloves, remove the liquid from the neck of the toilet with a container, and soak up the remaining liquid with a rag or old washcloth. Pour in the required cleaning liquid and leave for 1-2 hours depending on the degree of contamination, it may take longer.

Syringe for pumping water out of the toilet

A car oil change syringe can help remove water from the oil seal.

To pump out liquid from the toilet, you can buy a liter syringe at an auto store and pump it out with it. This is often done when replacing a toilet, so that the liquid inside does not spill onto the floor, or when storing the toilet in the countryside in the winter, when it is not in use, when low temperatures ambient air so that freezing water does not destroy the toilet.

How to get rid of urinary stone

Option #1

Remove water from the bottom of the toilet using one of the methods described above. Take the usual whitening product “Whiteness” and pour it into the neck. Leave it to soak for 12 hours, you can increase the time by testing with a stick to see if the urinary stone breaks off. After removing the stone, rinse everything well warm water. Be careful not to damage the walls of the toilet!

Water in the toilet neck prevents penetration unpleasant odors. After removing water from the water seal, foul odors may penetrate from the sewer into the toilet room.

Option No. 2

You can dissolve urinary stone in the toilet and clean it using a simple and available means this is vinegar and soda.
Pour 50 - 60 grams of baking soda or caustic soda into the neck. Take vinegar 9% 200 gr. glass and slightly heat it over low heat to 40 degrees Celsius and pour into the toilet. will happen chemical reaction with the release of heat and foam. Leave it all overnight for 8 hours.
Rinse off any remaining residue with warm water and repeat the process if necessary.

Video: How to clean a TOILET from TERRIBLE limescale and urinary stones

Option No. 3

Cleaning the toilet from a simple layer of urinary stone with Coca-Cola
Coca-Cola contains a weak solution of orthophosphoric acid that can remove carbon deposits from pots and remove limescale and urinary stones. You will be pleasantly surprised at how clean it can be. Can be used as a prophylactic.
Take a 1.5 liter bottle of the drink and pour it into the neck. After about four or five hours, you can polish the earthenware and remove a simple deposit with a toilet brush.

Video: How to clean Cola

Option No. 4

Removal using oxalic acid.
There is oxalic acid powder on sale that can be successfully used to quickly clear urinary stones from the toilet.
To do this, you need to take all precautions when working with acids: wear safety glasses, rubber gloves, and a respirator. Apply powder to damp cloth and wipe contaminated areas and walls where there is limescale or urinary stone. Leave it all alone for an hour or two. Treat the surface with a brush and rinse with water.

Method number 5

How to remove plaque from urinary stones using citric acid.
Citric acid for the toilet has long been used by housewives and in everyday life in general. Take two small packets of citric acid, you can use essence instead of citric acid.
Pour the powder onto problem areas and rub with a brush and water. Close the lid and leave for 2 hours. Rinse again with a brush and rinse everything off with water.

If you are using a porcelain toilet, do not use metal brushes or cleaning powders that contain abrasives. Porcelain is very fragile and deteriorates. In some cases, do not pour boiling water, this will lead to damage and microcracks. Use liquids and gels.

Liquid acids and alkalis

To get rid of urinary stones, especially on fragile porcelain toilets, cleaning agents containing phosphoric acid will help. Take 100 grams of this substance and apply it to the urinary stone. This is a quick remedy for stones; after 15 minutes you can wash everything off with water, rinsing everything with a brush.

To protect your skin from irritation from phosphoric acid, always wear rubber gloves.

Hydrochloric acid (HCL) household use for cleaning urinary stones from the toilet bowl

A 33% percent solution of hydrochloric acid is widely used in everyday life, in particular for cleaning the toilet from urinary stones. This is the most effective remedy for removing deposits on porcelain and earthenware surfaces. You only need to wear eye and skin protection.
One glass of acid is enough to remove all plaque from the surface and walls of the toilet.
If the deposits are ingrained, then treat everything with a brush, as if rubbing it all inside.
After fifteen minutes, rinse everything with plenty of water, flushing everything down the drain.

Where is phosphoric acid used?

1. Food additive (E 338),
2. Pepsi Cola and Coca Cola drinks (immerse raw meat in Coca Cola and you will see it turn white. This is the action of acid!
3. Used in food industry as an additive to sausages, processed cheese, baked goods
4. Soldering flux stainless steel tin
5. In rust removers

The main advantage of this product is that phosphoric acid does not destroy rubber and plastic products.

Video of the best “Silit Bang” product for cleaning urinary stones

For a year my toilet bowl was not rubbed or cleaned, and urinary plaque formed, or as it is called, urinary stone. I spent 2 hours scrubbing the toilet with various chemicals in the evening, left it soaked in chemicals overnight, scrubbed it in the morning for 2 hours and ended up scrubbing only the middle. I started randomly pouring in all the chemicals that came across in the kitchen and bathroom. And one worked! I scrubbed the toilet completely white. It’s surprising that the enamel hasn’t been scratched yet, because I endured Pemolux for a long time.

Well, nafik start it like that, now I’ll clean it at least once a month... To find out more, watch the video under the article.