Very often you have to hang shelves on the walls to accommodate all the elements. To rationally plan the interior, it is worth using the corners and, thus, freeing up the walls for cabinets and shelving. To do this, you need a corner shelf, which you can make yourself from existing materials. The article will discuss basic recommendations on how to make a corner shelf, as well as basic examples of designs.

Place corner shelves in different rooms

You can install a corner shelf in every room, but in most cases it is great for the kitchen or bathroom. Any housewife will quickly place on it a variety of jars with seasonings, cereals and other kitchen utensils, and in the bathroom such a shelf near the mirror will allow you to accommodate all hygiene products and free up the necessary drawers. It is worth noting that these premises have sufficient high level humidity, which means the wood will need to be additionally treated with antiseptics and at least two layers of paint applied. The best option will become plastic or glass, since they have larger number advantages:

• resistant to moisture and temperature changes;
• mold and fungi do not appear on surfaces;
• withstand heavy weight;
• easy to clean;
• A variety of colors will allow the design to fit into any interior.

Also corner shelves on the wall - this is a rational option that is suitable for bedrooms, children's rooms and living rooms. Any other furniture can be placed under the shelf, for example:

• nightstand;
• computer desk;
• armchair.

Regardless of what material was used, the design will look impressive and presentable. The corner shelf will conveniently accommodate all sorts of little things: books, photographs, dishes, candles, toys and much more.

Pay attention! To add more impact to a corner shelf, you can swipe to it. LED backlight. Using this method, designers add depth to the wall.

Required materials and tools

Before you start planning and manufacturing, it is worth collecting the available materials and calculating: will there be enough of them? You can make your own corner shelf from a wide variety of materials, such as:

• wooden boards;
• plywood;
• glass;
• plastic;
• window sill profiles;
• iron and others.

The first 4 options are considered the most common and practical. Anyone can handle them, and there’s no need to special tool, as is the case with glass or iron. The set of tools in each case will be varied, but if we talk about lumber, then it’s worth preparing in advance:

• hacksaw;
• jigsaw (manual or electric);
• saw;
• stationery knife;
• drill;
• sandpaper;
• glue and fasteners;
• ruler;
• pencil;
• paints and varnishes (paint or varnish);
• tassels.

Pay attention! For comparison, when making a corner glass shelf you will need fewer tools: fasteners (screws and dowels), a level, a drill, a felt-tip pen and a ruler.

Step by step instructions

1. As the main suitable material regular board, which remained from the renovation. The width should be selected individually, based on the items that will be placed on it and the place where it will be installed.
2. In addition, for fastening you will need glue with a dispenser and screws (3.0x25 mm). Semicircular slats can be used as decoration.
3. We mark the board at a 45° angle to the required length and use a hacksaw to cut it at an angle of 45°. As a result, we get 4 shelves.
4. From the remains of the board you need to cut out racks of the same size (for example, 5x20 cm) in the amount of 6 pieces.
5. All elements should be sanded until perfectly smooth.
6. Let's start assembling the structure. Each shelf, except the top one, must be secured with two racks. The markings are applied in the middle, then the elements are fastened with screws. To strengthen the fasteners, use PVA glue.
7. For ease of fastening, the middle shelf posts are placed along the edges.
8. The remaining parts of the corner shelf are assembled in the same way.
9. If you wish and have free time, you can decorate the shelves using semicircular slats. So, with their help you can make low handrails so that small or round accessories do not fall out. On finishing stage the shelf is painted.

Pay attention! After the first element has been cut out, it is necessary to place it against the wall and check the correctness of the calculations. To prevent the board from bursting when fastening, the hole for the self-tapping screws is drilled slightly smaller than the screws.

Corner glass shelf

To make a small and simple design, you won’t need a lot of time and special skills, even if we are talking about a glass shelf. So, to be precise and produce a design correct sizes, it is necessary to take measurements. After this, a diagram is drawn on paper indicating all the obtained parameters.

You can cut the glass yourself; if you don’t have a tool, go to a special workshop. Here craftsmen can cut out the required shape in a few minutes. The following can act as holders:

• metal rods;
• aluminum profile;
• wooden frame.

Ideally, you should buy special holders that will come with screws and dowels for fastening. The holders are attached to the wall and the glasses are put on one by one. Using a building level, levelness is checked. As a result, the cost of the shelf will be lower than the cost of a new one from the store.

Pay attention! For convenience, experts recommend creating a template for the future shelf from cardboard. This will avoid inaccuracies.

Only with strict adherence to the data obtained after measurements can a high-quality and reliable product be manufactured, in particular, a corner shelf. It is very important to measure between the walls, since this angle is not always 90°. You can take as a basis the most different materials that are gathering dust in a barn or garage.

We always strive to make the most of every centimeter of our favorite apartment and our faithful assistant in these aspirations - corner shelf. She allows these very difficult areas make any interior useful, beautiful, comfortable. Such designs are successfully used in any room, wherever you look - this is the hallway, where you need as much as possible more places for storage, and the kitchen with its useful little things, and the bathroom, where you simply cannot do without a small shelf in the corner. Also worth mentioning is the work area, and our favorite corner sofas, also equipped the most convenient shelves. So, first things first.

Photo of corner shelves

Photo of corner shelves you can easily find in any catalog modern furniture. The configuration of new apartments now has many more different corners than in Khrushchev’s “box” layouts of the last century. Yes, it all looks very beautiful, but often the corners become a real stumbling block, you can’t make a normal dressing room with your own hands in such a nook, you can’t put furniture there, but you want to use it. That’s why shelves like these have become so popular, allowing you to completely occupy an entire corner, even with trinkets, souvenirs or bright accessories. But they will “work” to create the necessary appearance of the entire apartment.

You can like buy a corner shelf, and do it yourself, this, strictly speaking, is not the most complex look furniture. However, this statement is true only in relation to ordinary forms, which rather have a purely functional meaning. Whereas among design ideas There are many options that deserve your attention. They may not be as useful as they are beautiful, but they can become a real highlight in your home.

Pay attention to this interesting storage for books in the steam punk style. It is suitable for youth loft interiors, for decorating apartments, studios, salons. She skillfully emphasizes the shape of the corner, taking advantage of all its advantages. Such corner shelves, photo one of which we saw is not anything outstanding in terms of difficulty of implementation, which means that you can try to do something similar on your own.

So many interesting options offered for kitchen equipment. This stuff is very necessary there, and there is never enough space for arranging all kinds of jars and bottles. For open spaces, a wide tabletop is often used, for a dark or modern one - with an abundance of drawers and cabinets, however, in both cases, if the tabletop has a bend, then usually nothing additional is done on it, and after covering the wall with a tiled apron, pick up anything on the wall is not possible. However, there are all these options - you can do DIY corner shelf according to the following example.

As you can see, there is absolutely nothing complicated, but due to the fact that the multi-tiered principle is used, quite a lot can fit on such a structure useful little things. A similar one can be used in each of the available corners. For it you will need any material that you can cut into shapes, ideally it should be decorated to match the color of the facade of your kitchen. The lower tier should not be made wide and monolithic, as its main task is to support further floors. The legs are nailed to it, on which the next floor is installed, so it will be as wide and deep as possible. To connect boards at an angle, you can use special glue, so-called “liquid nails”, and then level the surface, sand it using sandpaper and cover it with self-adhesive film. You adjust the height of the shelf yourself, but do not forget to maintain balance and take into account when creating the structure where its center of gravity is located. The convenience of such a console is its absolute mobility; if you need to remove or wipe it, you can easily put it aside and then return it to its place.

Corner shelf for bathroom

Another place where it is very important to take a corner from the rest small area The premises are the bathroom. There are several places here that you should definitely take. corner shelf for bathroom, racks and bookcases, because you need to store a lot of items, but it’s absolutely impossible to put them away.

The first place to take care is corner shelf in the bathroom- This is the area inside the shower stall or above the bathtubs. Often the side of a large bathing container may be enough to put shampoo or bubble bath there, but in reality the whole family has much more bathing accessories. In order to avoid inconvenience, you can hang on the same corner small design with metal frames and glass shelves. Preference should be given to glass, since it can be easily treated with all sorts of disinfectants household chemicals and it will not cause any harm to its surface. But at the same time, you must be sure of the safety of the entire structure; the elements should not “walk” or rise when pressed, and sit firmly in place, so that you can be sure of your safety. This advice will be especially valuable for families with small children. If you cannot afford a truly high-quality glass item, then it is better to buy a product made of good plastic, which will be much safer, although it will not look as impressive.

allows you to place a large amount of outerwear and other necessary things. But we don’t need so many things in the bathroom, so you can use others for towels, bathrobes, linen, open options placements, including original form. In the photo above you can see a rack that is made in the form of a folded stepladder. It ideally fills an empty corner, and, as in the case of the kitchen shelf, it is completely mobile, that is, it will allow you to clean hard to reach places no problem.

Near the mirror you also cannot do without such convenient storage for small items, if the topography of the room allows you to use this option. In this case, the mirror is slightly recessed into the niche and it’s simply a shame not to take advantage of the resulting angle. A nice technique would be to use a shelf and a mirror frame from a single collection or choose them as similar in style as possible.

Corner shelves on the wall

Hang corner shelves on the wall– the most rational option, which has been used for many years. After all, at the same time there remains a lot of free space below, which can be occupied by other furniture, put a table or a pot down indoor plant. Made from any material, they always look impressive and significantly decorate the room. They are used for convenient placement all sorts of little things, boxes and boxes are placed on them, but in the living rooms they are put on display, decorated with bright decorative elements

For example, such a set metal surfaces can be used in the living room, and in the bedroom, and in. They will be the perfect item for most classic styles, because even by themselves, without others decorative elements, can decorate a room. This is perfect corner shelf for icons, because a large image can be placed at the very top, several small icons can be placed in the middle, and the lower tier can be decorated with candles, embroidered towels, and flowers.

Built-in plasterboard floors can also serve as improvised surfaces, as in the example presented. These are excellent, due to the backlight they create depth to the wall, at the same time, they are quite functional.

Corner wall shelf

Corner wall shelf may be located not only on inside corner, but also on the outside, such options always look original, allowing you to fully use the surface of the wall from edge to edge.

In the example, you can see exactly this use of usable space, the set of which is corner table with shelves. Photo shows us how easy it is to occupy the entire surface with cabinets and shelving, while leaving it attractive and the room spacious.

Corner table with shelf

By the way, exactly corner table with shelf is ideal solution for equipping a mini-office or, more simply, a work area. This solution usually does not require too much space, but in the corner you can comfortably place a table, a chair, and all the materials you need for work or study.

Certainly, corner table with shelves, photo which you see above definitely requires good lighting, since you will have to work while looking at the wall. Provide the right height so that you can comfortably reach for books without hitting your head on the shelves.

Corner table with shelves does not have to be a worker, because there are plenty of examples dressing tables, which are convenient to place in exactly this way. In this case, cosmetics and personal care products, as well as jewelry and hair clips can be conveniently stored on the surfaces. We think it would be superfluous to mention that a mandatory element of such a table will be a high-quality mirror in a beautiful frame.

Size computer desks corner with shelves Today they are no longer as large as they were 10-15 years ago, so they can easily fit even in a small corner. But even if you don’t want to surround yourself with drawers and cabinets while working at the computer, then making at least one shelf, as shown in the example above, is a must. At the same time, it may well have a straight shape rather than an L-shape; this does not change its functionality, in this case. By the way, you can also use it bottom surface and do it on it spotlight, which you will use when turning off the basic desk lamp.

But if you take a break from work and remember about relaxation, you can’t help but mention the wonderful varieties corner sofa with shelves. In principle modern sofas they can already single-handedly replace the entire decoration of a room, including - they have surfaces not only to place a cup, but also the entire dinner service, there are storage containers, a minibar, etc. Therefore, if the sofa is your family’s favorite place to relax, then it makes sense to overpay and buy just such luxurious furniture.

One of the ways to decorate a room is to use shelves. But they are not only an object for decoration. Much more often they are functional. Shelves are hung on the wall, placed on the floor, some are hung from the ceiling or beams. But the best thing is that they are easy to make yourself, with your own hands.

Types of shelves in the house

Depending on the installation location, shelves can be wall-mounted, floor-mounted or hanging. If floor shelf has a large height - from a meter and above it is often called a rack. A few words about hanging ones: usually these are decorative structures that hang on a pipe or a specially driven bracket. This option is popular in rooms where heating pipes run under the ceiling: they just beg to have something hung on them. Shelves are hung on the pipe in the kitchen and bathroom: it’s convenient there.

They are made of wood, fiberboard, and have glass shelves. The same materials are used as stands, but they are also made from metal, plastic and other absolutely incredible things - for example, pipes or bottles.

IN living rooms It doesn’t really matter what material the shelf is made of. It is important that its design is in the same style as the interior. Even functionality is not always important: some play a purely decorative role. If they have anything on them, it’s only one or two items. Their role is to give the interior of the home special style and color.

Laconic style of apartment design and the same laconic shelves in a contrasting color. In this interior they - main element The free space above the sofa is organically filled with shelves to match the walls

If we talk about shelves in technical premises- kitchen and bathroom, in particular, then in addition to considerations of aesthetics, practicality requirements are almost universally added. Even decorative shelves in the kitchen should be washed well. For bathroom shelves, the requirements are generally high: from time to time there are very high humidity and materials are required that can carry it without any harm. There aren't many of them. It's plastic and stainless steel. They also make bathroom shelves from MDF, but they can be used normally if they are in good condition.

Shelves on the wall

In any room there are places on the wall where you just need to hang something. After all, most modern furniture occupies only the lower part - sofas, tables, couches. Upper part remains empty and dissonance arises: overloaded bottom part rooms and a half-empty or completely empty upper one. These voids on the walls are organically filled with shelves.

The whole system, and the most “dead” space is used - the corner

Structurally, most shelves consist of the actual shelves and lintels. But these components are combined into so many options that it is impossible to count. Simple design This is good: you can make any shelves with your own hands. Moreover, these products may be the first self-made things. It's really simple.

How and what to attach it to

It’s not for nothing that we start with fasteners. The design of a wall shelf largely depends on the type of mounting. Or maybe it’s the other way around. It depends on what to dance from...

Traditional hinges

There is a traditional way - on loops. It is suitable for wood and fiberboard, any other material that is thick enough to attach. Screwed onto the sides with self-tapping screws. Then the distance between the centers of the loop holes is measured and marked on the wall (make sure it is horizontal). At the marked points, holes are drilled for the dowel, the dowel is inserted and a dowel-nail with a small head is screwed into it, which fits into a loop or bracket (a pin slightly bent upward). Then a shelf is hung on them.

Not all materials can be drilled. For example, glass shelves. You definitely can't screw anything into them. Fastenings for glass shelves are special: they consist of two parts, between which glass is inserted. Often elastic pads are installed between the holders. The bottom mount usually has a small clamping screw to secure it in place.

Fasteners for glass shelves

The most popular mount for glass shelves is called “pelican” - for its unique shape. He looks good himself, there is different colors. The thickness of glass that it can hold is from 8 to 34 mm. You can insert not only glass into it, but also any other material of such thickness. It just looks stylish with glass.

It’s easy to make glass shelves on the wall with it: you buy a mount, order pieces of glass with processed edges of the required size and shape from a glass workshop (or cut them yourself, if you know how). All that remains is the assembly itself:

1. Attach the pelicans to the wall. Two dowels each. Collapsible body - decorative overlay comes off and there are two holes in the mounting plate. One is higher in the body, the second is lower. We secured it and put the decorative trim in place.
2. Glass was installed.
3. Tightened the screw. All.

There are other forms of similar fasteners. The photo below shows a few of them.

Decorative brackets

Another type of fastening is brackets. They are reliable, some are decorative, so much so that they themselves are decorations.

Concealed installation - shelves without support

And the most amazing device for hidden installation. It makes it possible to hide the fasteners. It is cut out at the end seat under the pin and body of the holder and the shelf is simply put on it.

As you can see, even simple board or a piece of glass on such mounts is already quite good. But there is still a sea of ​​all sorts of ideas.

Bookshelves

There are strength requirements for bookshelves: they can hold significant weight. Therefore, the fastening, materials and design must be reliable. Traditionally, bookshelves are made of wood, laminated or veneered fiberboard. And then fiberboard with a long span (more than 90 cm) sag over the years.

Planning shelves on the walls for books own sizes, please note that the distance between the supports should not be more than 90 cm. Then even when fully loaded it will not bend. There are two types and varieties of shelves: wall-mounted and floor-mounted. Both of them can be angular.

In the very simple case This is a board secured in one of the following ways. Some options, especially correct delivery they look very good.

And with imagination, several planks turn into very interesting thing, which can even be the main element of decor. Ideas for self-made collected in the photo gallery.

And this is a serious way to expand the space due to the angles between two windows. Nonlinearity - they are always interesting, and on such a shelf you can put books of different heights

Floor bookshelves can be loaded more seriously. Here the forms are different: there are racks to which shelves are attached. The highlight can be a broken or unusual line of shelves, as well as interesting racks.

It's more likely bookcase or even a closet, but the essence does not change - the original color and interesting small shelves in the central part and the structure looks interesting
A very interesting idea - non-linear shelves and lintels made of thick glass

On the manufacture of fountains (both small indoor ones and more substantial ones for country houses, gardens or garden plot) read.

Hanging

Not very numerous, but an original type. The most important thing is that it can be done easily: a few planks, four ropes or two belts and you can get to work.

This is a complex system of blocks...and the shelves can be located at any level. Two planks, four ropes and half an hour of time are all that is needed to make this shelf How to make hanging shelf— graphic step-by-step instructions

To the nursery

While the child is very small, I want functional shelves, but with children's drawings. But where can you get these? Do it yourself. Any shelf of the configuration you like can be covered with non-woven wallpaper or thick wrapping paper (glued with PVA). After drying, coat with varnish twice. water based. Such shelves can be washed, but what’s most interesting is that the shelf can change with the child. You tear it off old decor, glue a new one. The idea is simple, it works perfectly.

For children, the shelves are not very different in design. If we talk about floor or shelving, then they must be strong, taking into account the fact that older children will definitely want to climb on them. Therefore, often even those shelves that stand on the floor are additionally attached to the wall: so that they do not collapse and crush young climbers. Based on these considerations, they are not made tall: even if they fall, it’s not scary.

The shelves in the children's room also differ in color - they are brighter, can be made in the form of letters, and boxes for toys can be installed in them: this makes it easier to keep them in order. In general, functionality and security must be combined.

System with drawers - cleaning will be quick Combination of open and closed shelves - convenient for preschoolers

Shelves and shelves for the kitchen

Say what you like, but in the kitchen the main thing is functionality. There is not much free space even on the walls: the cabinets take up a large area. Therefore, one of the tasks is to make the most of free space. There are interesting ideas for small or even very small gaps between the wall and the refrigerator or other household appliances. Strictly in size, you can make a pooka on wheels, which moves out and is completely hidden there. It is wide and narrow (see photo).

It’s easy to make such a retractable shelf-rack on wheels for different jars. Everything you need is at hand and out of the way

There are more interesting ideas about saving space. If the sink or station is located near the window, you can take the sides. There is an interesting hanging option- a grid on chains to which all utensils are attached. But such a shelf is possible if the desktop is not against the wall. Another option for saving space is if the kitchen-dining room is zoned with a counter, you can also make a shelf above it, which will be partially hanging. One part of it rests on the wall, the second on the counter or “hangs” on the ceiling.

Covering the entire wall above your desk with cabinets is not the best the best way out. They look heavy. The problem can be solved by using glass doors, but not everyone likes this. The solution is to make open shelves between the cabinets. They will add more lightness to the interior and work area will not put so much pressure on the rest of the space.

Glass and open shelves will “lighten” the interior The style is different - the idea is the same Closed and open shelves in one system - convenient and non-standard

Decorative and original

Often, shelves on the wall play a purely decorative role. They are designed to attract attention and this goal is achieved unusual shape, contrasting with the walls, color. You can’t bet much on it: one or two things, but how interesting they are.

Another option for “square” shelves. Two identical sets arranged differently If traditional square shelves are decorated around the edges with curly frames, the style turns out to be completely different

Another interesting topic is glass shelves. Just one glass is not very interesting. Its combination with wood and steel is more attractive. The effects are sometimes unexpected. Glass is assembled on guides: the material is fragile and heavy, and it needs to be held. Steel can do this.

In fact, these systems are intended for creating store interiors, but also in apartments modern style or look stylish.

Also suitable for vintage style

What are shelves made of? Even from pipes. Metal and plastic. Do you have any samples from the renovation? Use it and get it designer item, interestingly, collected from trash.

This is an interesting variation of a bookshelf made of pipes

It's hard to imagine an apartment or house without shelves. This piece of furniture plays both a decorative and practical role. They complement the interior and look harmonious in the apartment. Shelves can be installed in any room, be it a kitchen, a room or a bathroom. They serve as stands for kitchen utensils, books, plants, small trinkets, cosmetics and much more. If you want to free up some space in your apartment and organize your things, shelves ideal option for this. But what if the area of ​​your apartment is not so large? Corner shelves are perfect for you.

Based on the name, you can immediately understand that they are mounted in the corner of the room. Thanks to their design and placement, they can smooth out corners and save space in your home. It’s remarkable that anyone can do this. Such work will not take much time. Let's look at how to make a corner shelf for your home.

IN specialized stores Today there is a large assortment of shelves that are made of various materials. Thanks to this, they can be matched to almost any interior. Moreover, various shapes, designs and dimensions allow you to choose a product that will be ideal for functionality. But you will have to pay a considerable amount for them. Therefore, most people want to make a shelf with their own hands.

The first step is to choose the material from which the product will be made:

1. Tree. This is a classic, the simplicity and naturalness of the material has always attracted attention. Furniture and shelves made of wood will always be popular.
2. Chipboard and MDF boards. The boards themselves are made from recycled wood with the addition of formaldehyde. They are often used to make cabinet furniture and accessories. The material is easy to use. Finished goods covered with veneer.
3. Metal. To make shelves use metal profiles. They are used in the form of racks and transverse load-bearing elements. To avoid corrosion, the surface is covered with various polymer coatings.
4. Glass. A material that is often used when installing in the bathroom, as it is not afraid of moisture and is combined with mirrors. To operate, you need impact-resistant glass, which is attached to a metal supporting structure.
5. Drywall. Ecologically pure material and is not subject to combustion. Installation is very simple, and the drywall itself can be decorated with tiles, lining or panels.
6. Plastic or window sill profile. The transverse materials, as well as the racks, are entirely made of polymers.

As you can see, there is more than enough material; the main thing is to choose one that will suit the interior, be practical and functional.

Once the material has been selected, you should preparatory work and decide on the design of the shelf. If the choice fell on wood, you need the following tools:

• hacksaw;
• electric jigsaw;
• marker;
• fine-tooth saw;
• a compass with a large radius or a pencil with a string;
• glue;
• building level;
• file;
• ruler and tape measure.

Then you need to think about what design and shape the shelf will have. Products can be either complex design, consisting of additional elements, jumpers and several shelves, as well as a simple design with only one jumper (shelf), which is attached in the corner.

Let's move on to the markup. To calculate the dimensions of the required sheet, it is enough to measure the depth from the corner along the wall. It needs to be multiplied by 2 and added 5 cm for trimming. For example, having measured the required depth, you got 15 cm. We apply the formula:

Based on the formula, we need square sheet 35 cm in size. Such a sheet can be ordered in a store or cut out yourself. After that, using a pencil and a rope, we apply the knowledge of geometry lessons at school. To outline perfect circle, using a ruler or tape measure, you need to calculate the center of the slab, marking it with a marker. Using a button, we fasten one end of the rope to the mark, and tie a pencil to the other. We pull the rope and draw a perfect circle. The length of the rope should be the required 15 cm. Using a ruler, the circle must be divided into 4 even sectors.

Marking must be done carefully so that the parts are perfectly even. From 1 slab you will get 4 identical blanks, from which you can make either 1 or several shelves.

Cutting the workpiece and mounting a simple structure

Based on the markings, we cut the workpiece. For this purpose you will need a jigsaw. First, cut out a circle from the slab, strictly adhering to the line.

There is no need to use a hacksaw for this job. When cutting, the ends will be uneven and with burrs.

After cutting out the circle, saw it into 4 parts. The resulting blanks will be used as shelves. Here the choice is yours. You can make some simple shelves in different angles rooms or houses. In this case, the blanks are polished and grooves are cut into them, thanks to which they will be attached to the wall.

Holes are cut into the edge of the slab on both sides. On the left side the groove should be longitudinal, like a narrow groove, and on the right side it should be a point groove made with a drill. To do this, we make 2 holes in the left edge and connect them by repeated drilling. On the right side, the holes should have the depth of a self-tapping screw protruding from the wall; the structure will be attached to it. This type of fastening is called invisible. To select the diameter of the drill, start from the size of the screw head.

After this, the shelf itself is attached. To do this, it needs to be mounted on self-tapping screws. To ensure that everything fits perfectly into place and is well secured, self-tapping screws are screwed into the wall in the place where the grooves are made in the product. The screws on the right side must completely coincide with the location of the hole in the edge. On the left side, they should be positioned so that they enter the groove from below and move upward, fitting the structure close to the wall. This mounting option is more complicated than usual, but the shelf will look impressive.

If the simple option does not suit you, the design can be complicated. Using the same 4 finished item You can make a shelf with several tiers. To do this, reduce each next shelf by a few centimeters. The first, still with the same size of 15 cm, is attached to the bottom of the corner. The next one will be set a few centimeters higher, depending on your goals. A distance of 10 cm is recommended. Then, using the same pencil and rope, reduce the remaining 3 blanks by an equal amount.

We cut the rope by 3 cm and draw a cut line on the second piece. We cut off the excess and fasten it at a distance of 10 cm or more from the first finished shelf. We reduce the remaining two in the same way, forming a structure in the form of a Christmas tree. Fastening can be either invisible or using jumpers or screwed brackets.

To make the finished shelf more attractive, the visible ends are covered with veneer or the corners are rounded using grinder. You can decorate the transition from one lintel to another using veneer.

Another design option is a two-tier shelf, the side walls of which will serve not as a wall, but as wood. To do this, three equal parts of the circle are connected together. The base is positioned vertically, and the side walls are attached vertically from above. To obtain tight joints, the rear edges of the parts are trimmed. When the product has ideal geometry, you need to drill holes that pass through the wall of one sector into the end of the next. P

Using a screwdriver and self-tapping screws, we connect the three structures together. The remaining fourth part needs to be cut. This is done with the same pencil and a rope, 10 cm long. The excess is cut off, and the jumper is attached to the center of the finished shelf. Everything must be carefully checked with a building level and secured in place in the corner of the room. There are a lot of options for designs, shapes and designs, the main thing is your ingenuity and a little effort.

Corner shelves in the kitchen serve for convenience and storage of necessary kitchen utensils, spices or other things needed in the kitchen. Therefore, no one really bothers with the design. They are often placed above work surface so that everything you need is always at hand. Such shelves are shaped like the letter “L” and occupy not only a corner, but also space along the wall. For kitchens with a small area, this is an ideal option if it is not possible to install bulky cabinets, but dishes, cutlery and other kitchen utensils need to be stored somewhere.

Such shelves can be made from any of the materials mentioned above, but wood products will look most organic. To make such shelves, you need boards, a hacksaw, screws and a drill. By selecting right size boards, they are cut and connected to each other, forming shelves. The entire structure is attached to the corner.

Corner shelves for the bathroom

It's no secret that bathrooms are usually no different. large size. Therefore, saving space in the bathroom is simply necessary. Thanks to the shelves, you can conveniently place all your bath accessories: cosmetics, shampoos, perfumes, shower gels. Don't forget about detergents for washing and cleaning. Shelves will help save space, and everything you need will be at your fingertips without clogging up the bathroom.

Wooden shelves would be inappropriate here, since this is a room with high humidity. The ideal choice is glass shelves. They fit any bathroom design and harmoniously combine with mirrors. Plastic shelves are also suitable for this purpose. For convenience, they can be equipped with hooks for washcloths and soap dishes. Metal shelves are also suitable; they are more durable and can withstand greater loads. The main thing is that they do not rust, and for this they use chrome and stainless steel.

Corner shelves for books

You can often see corner shelves used to store books. It is not only convenient, but also beautiful. Such shelves complement the interior of the apartment and make it more aristocratic. The design itself can be varied; imagination will help make them original and practical.

A shelf made of wood looks impressive, parts of which are attached either on one side of the corner or on the other. It looks like a ladder. Such shelves are ideal for books, which, thanks to their shape, will fit perfectly into the right place.

Taking into account all the tips, making corner shelves yourself will not be difficult. This kind of work will only take a few hours. And the finished shelf will serve you for many years, delighting you with its beauty and practicality.

You might be interested in the following materials:

Video

From the provided video materials, you can learn about simple tips how to make a corner shelf with your own hands:

Photo

In the photographs provided, you can see various options for making a corner shelf with your own hands:

Schemes

These diagrams show calculations for making corner shelves:

The space in the corners quite often remains unused, despite the fact that in many modern houses The urgent question is: “what to do with the constantly accumulating trifles?” It is for such situations that there are stylish and practical corner shelves. Not only do they help turn a useless corner into convenient storage for books, decor and the like, but they can also serve as decoration and stylish accessory for any room.

In this article, we have collected several examples of functional and beautiful corner shelves that look great in the design of a living room, kitchen, bathroom, hallway, etc. Wall-mounted or floor-mounted, built-in or hanging, shelves or shelving, modern corner shelves come in a variety of shapes, sizes and styles to perfectly complement your home.

So, you want to save space in your apartment? Don't you like the emptiness in the corner of the interior? Want to make your room design more unique? Or maybe you don't know how to present all your books, dishes, souvenirs and other decor in the most favorable light? Then the corner shelves are the first thing you should pay attention to.

Stylish corner shelves (photo)

The kitchen, bathroom and hallway are the most problematic rooms in the house in terms of the need to store a large number of small things in them. Thick floating shelves are already fashion trend, and open corner shelves also help to significantly save space and make the room look freer.

In the hallway, corner shelves can simultaneously serve as a stylish clothes hanger or a stand for bags and shoes.

Tall and narrow floor-mounted corner shelves can look very elegant even with the simplest decor.

At the same time, some corner shelves can be very stylish and original design, which will catch the eye and transform the entire shape of the space.

We hope that after these photos you no longer doubt that corner shelves can help make your interior design more functional and interesting. It remains only to note that beautiful corner shelves, like any piece of furniture, can be made by you yourself (see photo below). Thank you for reading Dekorin!