Everyone who uses hot/cold water meters has long been convinced that this approach allows for good savings. The population is guided by the principle that you need to pay for what you use - this is the most correct approach.

Legislation

The government has adopted several acts that regulate the means and methods of measuring water supply. Federal Law No. 102 of June 26, 2008 - this law governs the provision of uniform measuring instruments. The document defines the need to check devices according to metrology requirements.

The purpose of the act is to protect the rights of citizens, society and the state from negative influence incorrect measurements. This document also establishes a period after which the inspection must be carried out. During this period, the device operates unhindered, taking into account the supply of cold/ hot water. It is allowed to install only those meters that are approved by the register of measuring instruments of the State Standard of the Russian Federation.

Federal Law No. 261 dated November 23, 2009. This law “On energy saving and increasing energy efficiency and on amendments to certain legislative acts of the Russian Federation" obliges all water utility subscribers in apartment buildings to install water meters without fail. To do this, you need to draw up an agreement with the water utility, and 180 days are given for all installation procedures.

Mandatory installation of a meter provides the following advantages:

1. Economical management of resources.
2. The measuring tool allows you to determine possible losses.

Decree of the Government of the Russian Federation No. 354 dated May 6, 2011. This document explains the features of payment for the use of water and other services in apartment buildings, as well as the rules for providing utilities. The resolution clearly defines the concept of the amounts payable in the presence of a meter, as well as in its absence.

Why is it mandatory to check meters?

The device for measuring the amount of water supplied is an accurate measuring instrument. The latter may simply work together over time and show a false expense for which you may overpay.

Neither the water utility nor the end client in your person will like this situation. What is the reason for the loss of measurement accuracy and how large is the error, and in what direction?

Hot/cold water has different effects on metering devices. Hot water contains chemical additives that, in tandem with high temperature, aggressively affect the parts and mechanisms of the measuring instrument. Therefore, checks of such devices need to be done more often.

The result of such a test can show complete serviceability, while failed equipment should be repaired or replaced.

When is it necessary to change water meters?

The inter-inspection period of the installed measuring device in the hot water supply system is 4 years. As for cold water supply, meters are checked every 6 years. Established deadlines They don't say it will need replacement. The water meter must be replaced when a breakdown is detected and the recording occurs with errors.

The average service life of the meter is 12 years. From this we can easily conclude that one instance can last 6 years, and the other - all 18. It is important to note that you need to start the procedure for checking the meter in advance, and not on the last day of the end of the check interval. It is best to do this one to one and a half months in advance.

If the inspection deadline is approaching, the supplier may also notify you by written notice.

How are water meters checked?

The check is performed on specialized equipment, but not everyone knows that the same check can actually be done right on site. To carry out the procedure, the subscriber can choose an organization that has the right to perform this type of work.

The procedure for replacing the meter:

• before starting work, it is necessary to turn off the water with prior approval from the Housing Office;
• open access to water supply pipes;
• the condition of the pipes must be satisfactory;
• Shut-off units should be provided in the apartment to locally shut off the water.

The check is performed using several methods:

1. With the counter removed.
2. Without removing the meter.

If you use the services of a specialized company, call a home plumber to dismantle the water meter. The removed meter will be put into operation and a document on seizure will be drawn up, which indicates the serial number and brand of the device. Keep the documents for the counter with you - your passport and your passport as a citizen of the Russian Federation.

The verification procedure is performed using a calibration unit, which verifies the readings as accurately as possible. The duration of the check ranges from several hours to several days. When you receive the water meter back, you will be given the following documents:

1. Meter installation agreement.
2. Certificate of completed work.
3. Document confirming the commissioning of the water meter.
4. Certificate for cold water supply meter.
5. Passport for hot water supply water meter.
6. Certificates for equipment.
7. Maintenance contract.

If after checking it turns out that the water meter is broken, it will need to be replaced. A working device is installed in the same place, all changes are documented. The new water meter can be used until the next check comes.

Checking the water meter on site in 2018-2019

When choosing a company to check the meter, make sure that it is specialized and has the appropriate permits for such activities. Upon arrival of specialists, all necessary water meter tests are performed. This approach is the most convenient - you save a lot of time. Representatives of the equipment testing company independently contact the water utility, which, in turn, eliminates the need for verification. You, as a client, receive a document about the date and results of the meter tests.

This on-site testing approach has its drawbacks. During the test, up to 250 liters of water are passed through the device, for which you will need to pay. If a malfunction is detected, you will not be able to repair or adjust the water meter on site - dismantling will still be required.

If the check was not completed on time: what to do

If there is a water meter inspection report, its owner is obliged to ensure that he does not miss the deadline for the next procedure.

An incorrectly functioning meter is considered unusable, and payment based on these readings is impossible. Thus, in such a situation, you will pay for water utility services according to average standards. In simple words, as if you do not have a meter installed taking into account the number of people living in the apartment.

These numbers will be much higher than what you paid if you had a properly working meter.

Is the verification service paid or not?

You have to pay for these types of checks. The cost varies from 370 to 1,000 rubles. You can make payments online without commission. Organizing the verification procedure is not at all difficult. How you perform the check is at your discretion.

To summarize, we note that meters need to be checked once every 6 years for cold water supply, and once every 4 years for hot water. The procedure is paid, and the maximum cost for the service does not exceed one thousand rubles. There are only three ways to check:

1. Inspection by the water utility with dismantling of the water meter.
2. Self-diagnosis on site with the involvement of a specialized organization that has all the permits to carry out such work.
3. Dismantling and inspection by the same specialized company on site, only in a shorter period of time than diagnostics at the water utility.

The last two methods allow you to quickly complete the procedure, and the company’s specialists contact suppliers and notify them of the completed check.

Do not ignore the end of the interval and the need to test the water meter. By doing this, you can only overpay for the water supply services received at prices that are considered average.

Anyone who has installed meters on pipelines supplying cold and hot water from central networks has been able to see that this is beneficial. There is a category of the population that believes that, and this is the most correct approach.

Dear readers! Our articles talk about standard methods solutions to legal issues, but each case is unique.

If you want to know how to solve exactly your problem - contact the online consultant form on the right or call the numbers below. It's fast and free!

Laws regarding the installation of water meters

The government has adopted a number of legislative acts relating to measuring instruments and methods.

Federal Law No. 102 dated June 26, 2008

Federal Law “On Ensuring the Uniformity of Measuring Instruments”, it defines the need for verification of measuring instruments to metrology requirements.

The purpose of the Federal Law is to protect the rights and legitimate interests of citizens, society and the state from the negative consequences of unreliable measurement results.

Verification (verification) is a set of activities carried out to confirm the compliance of metering devices with metrological requirements.

Verification of a device is a check of its serviceability and accuracy using special equipment.

The law regulates the period during which the meter can operate unhindered and what intervals are permissible between verifications of hot and cold flow meters. cold water.

Metering devices are allowed to be installed only those included in the State Register of Measuring Instruments State standard RF.

Federal Law No. 261 dated November 23, 2009

This law states the need to draw up contracts between the service provider and their consumer; this act allocates 180 days to fulfill the requirements.

The Energy Saving Law makes it mandatory to measure the consumption of utility resources.

Mandatory installation of metering devices will make it possible to:

1. Increase the ability to save resources;
2. Allows you to determine losses.

You may be interested in an article on how to save energy at home, you can read about it.

Decree of the Government of the Russian Federation No. 354 of 05/06/2011.

This act explains the nuances of fees for the use of water and other services for residents of apartment buildings and residential buildings, as well as the rules for the provision of utility services.

Here the concept of the amount of payment in the presence of a metering device and in the absence of one is clearly divided.

Why are water meters subject to mandatory verification?

A water meter is a fairly accurate and sensitive device, which after a period of time can fail, that is, show an inaccurate water consumption.

Such indicators are of no interest to either the consumer or the supplier. Why are the readings on the meter no longer accurate, and how much do the device data differ from the actual ones, and in what direction?

Hot and cold water have different effects on metering devices. It is clear that hot water contains chemical additives, so its composition and high temperature more aggressive towards the meter parts, and therefore verification of metering devices on hot water supply pipelines needs to be done more often.

A check may show that the device is working properly, and damaged metering equipment must be repaired or replaced.

When do you need to change water meters?

The calibration interval for a meter installed in a hot water supply system is 4 years, for one installed on a pipe with cold water- 6 years.

Cold water meters should be checked no later than after 6 years, and hot water meters after 4 years.

There is no need to think that the period set for verification means the replacement of flow metering equipment. The water meter needs to be changed only if it does not work or shows incorrect water consumption figures.

The service life of a water meter is on average 12 years, which means that one device can last 6 years before failure, and another - 18 years.

It should be remembered that it is better to take care of the issue of verifying the water flow meter in advance, 1-1.5 months before the end of the verification interval.

The service provider company maintains records for each apartment, each house or other facility. If the user himself has forgotten that the period between verifications is coming to an end, he will be reminded - he will be sent a notification.

Procedure for checking water meters

How are water meters checked? Since verification must be carried out only with the help of special equipment, not everyone knows that verification can be carried out not only in stationary conditions, but also on site.

To carry out work, citizens independently choose an organization that has the necessary permits.

How to replace a water meter?

1. Before work starts it is necessary to take care of turning off the water, having agreed upon this with the Housing Office;
2. Provide access to water supply pipes;
3. Pipes must be in satisfactory condition;
4. Cranes (valves, ball valves) must completely shut off the water in the apartment.

The check can be done in several ways:

• With removal of metering devices
• Without removing metering devices

If the verification will be carried out by a specialized company, then you should call a plumber, house maintenance, to remove the counter. The dismantled device will be put into operation, a withdrawal report will be drawn up, indicating the brand and serial numbers. You need to have a document for a water meter with you - a passport and your passport as a citizen of the Russian Federation.

For the verification procedure, special calibration installations are used, which allow the accuracy of the readings to be verified as accurately as possible.

Read the article on who is entitled to subsidies for housing and communal services.

Having received his accounting equipment back after some time, from several hours to several days, the consumer will receive the following documents:

1. Agreement on installation of water meters;
2. Certificate of completed work;
3. Certificate of commissioning of a water meter;
4. Certificate for cold water meter
5. Passport for hot water meter
6. Certificate for meters
7. Maintenance contract.

A water meter found to be unsuitable will have to be changed, a working one must be installed in its original place and used until the next check comes.

There are methods in which removal of meters is not required - verification will be carried out right on the spot.

It is necessary to make sure that the company is accredited and its employees are certified.

How are water meters verified? We invite you to watch the video.

Of course, this verification method is extremely convenient. Representatives of the company will contact the supplier themselves and remove the issue of verification. The service consumer will receive a document stating the date and results of the procedure performed.

This method also has disadvantages. In order to carry out an accurate verification, about 250 liters must pass through the device connected to the tap. water, for which the apartment owner will have to pay.

If an error is detected on the water meter, you will not have the opportunity to repair or adjust the device on the spot. The device will still have to be removed.

What threatens the owner of a residential property if he does not check on time?

Having the IPU verification certificate in hand, the owner must ensure that he does not miss the deadline for the next inspection.

An unverified water meter, both hot and cold, is considered unusable, which means it is impossible to pay according to the readings of such a device.

In the future bills for water use will be issued at average rates, as for users who do not have meters, taking into account the number of residents registered in the apartment.

These standards will force the consumer to spend a significantly larger amount each month than when the meter readings were taken into account.

IPU verification is a paid service or not?

Citizens are required to carry out verification of IPU (individual metering devices) at their own expense within the time limits specified by the manufacturer and specified in the passport of the metering device.

You have to pay for verification. The cost differs in different regions, but the average figures range from 370 rubles. up to 1000 rub.

If you want to find out how to pay for housing and communal services via the Internet without commission, we advise you to read.

At the same time, it would be useful to note that the cost of work when using a portable standard, that is, on site, without dismantling the water meter, and in the case of removal are almost equal.

Tracking the verification period and organizing its implementation is not so difficult. A self-respecting home owner will always be interested in ensuring that the equipment in his living space works correctly and is in good working order. You can choose any of the methods for checking water meters.

In 2008, the Government of the Russian Federation adopted Federal Law No. 102 on the unity of measuring instruments. It aligns measurements of consumed resources with metrology requirements.

This protects the rights of citizens by preventing overpayment for unused resources.

According to legislative acts metering devices are periodically checked for accuracy of measurement indicators. They are sealed by specialists from certain authorities.

Legislative acts on measuring instruments and methods

To calculate the volumes of cold and hot water used, meters approved for use by the State Register are used.

All water consumers in private, apartment buildings, and temporary industrial facilities must
install water consumption meters and change them on time.

Water suppliers and consumers enter into an agreement on the performance and payment of the service, which must be executed no later than 6 months from the date of signing. The law prescribes the mandatory installation of meters. This allows you to save more water, electricity, heat, and determine the amount of losses.

At home, having consumption meters for the listed resources, the consumer is interested in their economical use. The dimensions are legally approved even in its absence. Decree of the Government of the Russian Federation No. 354 of 05/06/2011 determines the procedure for calculating for the use of water by residents of private and apartment buildings. The same law stipulates the rules for the provision of services by public utilities.

To obtain reliable information about water consumed, you must have an accurate metering device. Therefore, meters are periodically tested for measurement accuracy. The amount of payment depends on their testimony.

Deviations in readings are not needed by either consumers or suppliers.

On pipes with cold and hot water install different meters. Hot water contains chemicals. Its high temperature also affects the parts of the device. Therefore, hot and cold water meters are made of different materials allowing you to use the device for a long time. The hot water meter is checked more often than the cold water meter. The test will reveal device malfunctions. This will be a reason to change it.

On average, the cold water meter is checked once every 6 years, hot water - once every 4 years. If the device is in working order, it must be resealed after installation. There is no need to change a working meter. Only those devices that provide inaccurate data should be replaced. Maximum term meter service – 12-18 years.

Resource providers keep records of each device and notify consumers in advance of the need to conduct a scheduled meter check.

You can check the quality of the device’s operation on site without removing it from the system. Owners can independently choose an inspection organization that has a license to carry out such work.

To check the device in place, you need to:

• negotiate with the housing office on a temporary shutdown of water,
• open the pipeline for inspection,
• ensure the working condition of the system pipes,
• check the reliability of the water shut-off taps and valves.

Then the device must be removed or checked in the system. The verification company’s specialists do not dismantle the device themselves. To do this, you need to call a plumber who is assigned to the house. He removes the meter and hands it over for inspection.

In the presence of the owner, a report on the seizure of the device is drawn up, the brand and series number are recorded. When checking, you need to have a passport of the device and a passport of the owner. If the device is examined under stationary conditions, it should be returned to the owner after a few hours, or after 2-3 days. Based on the results of the verification, the following documents are drawn up:

If during verification it turns out that the device is not suitable for further use, it must be replaced with a new one. If the meter is working properly, it is set to work until the next verification.

It’s easier to check the device in place without removing it from the system. In this case, you do not have to turn off the water and dismantle the water meter. True, to carry out measurements you will have to release about 250 liters of cold water from the tap. The consumer will have to pay the cost. But, on the other hand, he will receive a conclusion about the verification carried out immediately on the spot and he will not have to remove and install the device. If the consumer is confident that there is no instrument error, this method is acceptable. If an inaccuracy in the readings is discovered, the device will need to be dismantled and replaced with a working one.

It is important not to miss the deadline for the next verification of water consumption meters. The readings of an unverified meter are considered unreliable, and charges for the overdue verification period will be averaged, as if there was no meter. The amount of monthly water payment will be several times higher than according to the meter.

Verification of any individual metering devices is a paid service. Each region has its own payment tariff.

Is it necessary to install a meter in practice?

This point is not very clearly stated in the Federal Law. In principle, it is not profitable to use water in an apartment without accounting it. The tariff sets payments for hot and cold water at almost 60% more than the average consumption rate.

Some regions make their own amendments and nuances to the law. For example, in Moscow, by Decree of the Capital Government No. 77-PP dated February 10, 2004, certain intervals between checks of metering devices were abolished. Housing and communal services do not have the right to force consumers to change meters, much less advertise inspection organizations.

The law requires the installation of water meters, but does not mention sanctions for those residents and consumers of the resource who do not do this. The law does not provide for any administrative penalties. The consumer must install and change metering devices at his own expense.

All citizens who believe that it is worth paying only for those services that they themselves consume, installed meters. Payment for hot and cold water is carried out taking into account their readings.

But, like all devices, they tend to age and fail. That is why water metering sensors must be replaced after a certain time. We will talk about the rules and procedure for replacing hot and cold water meters in the article.

Dear readers! Our articles talk about typical ways to resolve legal issues, but each case is unique.

If you want to know how to solve exactly your problem - contact the online consultant form on the right or call free consultation:

When should you change?

According to Federal Law No. 261, all citizens must install meters in their apartments that measure water readings.

Responsibility for their installation and maintenance lies with the residents themselves.

Moreover, only those water meters that are included in the state register of measuring instruments are suitable for installation.

In accordance with Federal Law No. 102 all measuring instruments must be verified. During verification, the accuracy of the measurement and the reliability of the metering sensor are monitored.

The time when it is necessary to change water meters is set individually. This can be clarified after the next inspection.

If it shows deviations in measurements, then the device must be replaced. This must be done and when detecting incorrect operation of the meter: When the apartment taps are turned off, it continues to spin.

The service life of hot and cold water supply sensors is calculated from the date of manufacture noted in the passport, and not from the date of their installation.

What are the timing and types of electric meter verifications? Find out about this from ours.

Calibration interval

What is the frequency of verification and replacement?

In accordance with Government Decree No. 77-PP dated 10/02/2004, clause 7.9 determined the interval between verifications for sensors equal to 4 years, and for cold water - no less 5 years.

This document has been amended to abolish the obligation to conduct an inter-verification interval.

This is stated in Government Decree No. 831-PP dated 12/26/2012. Clause 3.1, which discussed the organization of verification of water meters, canceled.

Now no one can force people to check their water meters. The residents themselves voluntarily decide on the need for such verification.

Terms of work according to the technical passport

Service life of any device recorded in his technical passport. The average operating period of a domestic water metering sensor is 12 years. Need to know that different models and brands have their own period of operation, which is normative.

If after verification it was recorded normal operation device (no error in water measurement), and the standard service life has expired, then such a meter can continue to be used based on a report drawn up by a specialist.

The actual service life in this case will be longer than the standard one.

About what to do if verification period ends counter, you can find out from the video:

You can find out at whose expense the replacement of electric meters is carried out from our.

Why do they fail?

Often water metering sensors become faulty ahead of schedule, established in the technical passport.

There are many reasons for this. Here are some of them:

1. Inconsistency water quality, certain standards. For example, various impurities are found in it, which, passing through the device, deform it. This is also an increase in water hardness, which results in slagging of water pipes.
2. Summer shutdowns water.
3. Large volume water flow passing through the meter.
4. Drastically changing for a short time.
5. Various manipulations of consumers with devices to underestimate their readings. For example, installation of magnets.

What is the permissible noise level in decibels in an apartment during the day and at night? find out right now.

What to do if it breaks down or is “lying”?

If during operation it is discovered that, the counter doesn't work or:

• the meter continues to spin even with all the taps in the apartment closed;
• the meter readings turned out to be too high for the same monthly water consumption;
• the service life specified in the technical passport has expired;
• The device was installed with a manufacturing defect.

You need to replace the sensor with a new one. This must also be done in a situation where the meter’s passport is lost.

How to change?

Where to call or contact?

Replace a device that has stopped working possible in several ways:

• contact the management company;
• invite a specialist from an organization that has this type works license;
• do it yourself: the law does not prohibit replacing a water meter with your own hands.

Often the management company offers several companies to choose from for replacing or checking meters. You need to call them and find out the prices for this service. After selecting an organization, a work time is assigned to replace the devices.

If the meter is purchased directly from the master, then before installation he must show the device to ensure its integrity and check for the presence of the factory seal. You can also purchase the device yourself.

After the work is completed, he is written out commissioning certificate. The new meter must undergo mandatory sealing. Without this, his testimony is considered invalid.

The issued paper and registration certificate must be taken to the organization where payment for water supply is made, for registering a new meter.

If called private specialist or the replacement was carried out independently, it is imperative to call a technician from the management company to seal the meter.

How much will it cost?

Replacement cost includes:

• water meter;
• carrying out work;
• package of documents: an agreement with the company for the removal and installation of the device, a certificate of completion of work, a certificate of putting the meter into operation, a technical passport.

The average cost to replace one water meter is 1300-1500 rubles, for initial installation – 1800-2000 rubles.

Moreover, if you replace several devices at once, it will cost a little less - 2400-2800 rubles for two counters.

If water meters break down, they must be replaced. You can do this in any way: yourself or by inviting a specialist.

The new device must be checked for the presence of the factory seal before installation. After its installation, you need to seal it.

Documents for a new water meter are provided to the management company for registration.

You can learn how to change the water meter yourself from the video:

Any person who has installed meters for hot and cold water is convinced of personal experience in obtaining benefits. The majority of Russians are of the following opinion - you only need to pay for what you use.

In this article we will tell you how often water meters need to be changed according to the law.

The government has adopted certain regulations, controls and measurement methods:

102 federal law on replacing a water meter

Given legal act dated June 26, 2008 determines the feasibility of checking measuring instruments (whether they meet metrology conditions).

1. The main task of the Federal Law is to protect rights and real interests individuals, countries as a whole from negative consequences erroneous calculation results.
2. Verification (verification) refers to various actions, the task of which is to confirm that water meters comply with all necessary conditions.
3. Inspecting a device refers to checking it for damage and accuracy. Special equipment helps to check the device.
4. The legislation specifies the time period during which the metering device is able to carry out its activities as usual. It also indicates after what time water meters are changed.

Federal Law No. 261 of November 23, 2009

This regulatory legal act imposes an obligation on everyone using apartment building, summer cottage, water with the obligatory installation of special devices that keep track of it.

The one who supplies services and the one who consumes them are obliged to enter into contracts. The requirements must be fulfilled within 180 days.

Counters help:

1. Seriously save resources.
2. Decide on losses.

Government Decree of the Russian Federation No. 354 of May 6, 2011.

This act describes the specifics of the amount of fees for the use of water and other services. Applies to owners of apartment buildings and residential buildings. The law specifies the conditions under which services are provided in this area.

There is also a detailed division of the term about the amount of payment if there is a water meter or if it is absent.

For what reasons do devices need to be checked?

The counter is considered very accurate and sensitive. After a certain time period has passed, it may fail, in other words, display information that is not the most reliable.

Neither the one who consumes water nor the one who supplies it needs such information. What are the reasons for such a failure, and how much does the water meter information deviate?

Warm and cool water have different effects on the meters. Of course, in warm water there are chemical components, so its structure and high temperature have a greater effect on meter. It is for this reason that such devices need to be checked much more often.

The results of the study can inform about the serviceability of the device. If accounting equipment deteriorates, it is sent for repair or replaced.

When is it necessary to replace hot and cold water meters?

The inter-verification period for a meter monitoring hot water is considered to be 4 years. For cold water supply – 6 years.

But this does not mean that after this time it will be necessary to replace devices that take into account consumption. Water meters need to be replaced only when they stop functioning. Or when they reflect unreliable data.

How often are water meters changed? The average operating period of a water meter is 12 years. In other words, one device can work without breaking for 7 years, another – for 15 years. Each case is individual.

It is necessary not to forget that it is better to think through this issue in advance - a couple of months before the time period between verification intervals expires.

The one who supplies the services monitors every living space, every house, and so on. If a person accidentally forgot about the expiring period between checks, he will definitely be sent a special notification.

In what order are water measuring devices checked?

How exactly are water meters checked? Since this procedure requires a certain technique, not everyone knows that this process can be implemented both in a hospital setting and at home.

For this purpose, a citizen independently chooses an institution that owns all the required documents.

1. First, the water is turned off, notifying the Housing Office in advance.
2. Provide access to water supply pipes.
3. The taps must completely shut off the flow of water into the home.

Checking is carried out using the following methods:

1. Water meters are removed.
2. Water meters remain in place.

If the procedure will be performed by a special company, it is necessary to call a specialist involved in home maintenance. He will remove the device. The disassembled device will be put into operation, with the drawing up of a withdrawal certificate. The brand and serial numbers must be indicated. There must be a document for the device - it is called a passport, as well as a document - proof of your identity.

Checking is carried out using special calibration installations. They verify the accuracy of information as competently as possible.

After a certain period of time (after 3 hours or several days), the device is returned to the owner with the following documentation attached:

1. Agreements that water measuring instruments have been installed.
2. Certificate of completed work.
3. Certificate of commissioning of the meter.
4. Cold water certificates.
5. Passports for hot water.
6. Certificate for water measuring instruments.
7. Technical support agreements.

When is it legal to change water meters in an apartment?

If the device is found to be damaged, it will need to be replaced. If the device is in good working order, it is returned and you can continue to use it until the next verification.

There are ways in which you do not need to remove the meters - the verification will be done right at home.

But it's worth getting proof of the company's accreditation. Its specialists must be certified.

Of course, this verification method is very convenient. Company employees will call the supplier themselves and resolve this issue. The homeowner will only have to receive a document with the date and results of the process.

But this method It also has disadvantages.

1. To carry out a proper verification, more than two hundred liters of water are passed through a device attached to the tap, and the owner of the residential premises will have to pay for this.
2. If the meter shows inaccuracy, you will not be able to repair or correct anything on the spot. In this case, the water meter will be removed.

What consequences await the owner of an apartment or house if he fails to pass the inspection within the specified period?

Having the verification report, the owner is obliged to track the date of the standard verification.

An untested water supply device of any type is considered faulty. In other words, paying for readings on this water meter becomes impossible.

Next, bills for payment for water use will begin to be calculated based on the average established standards. The procedure is the same as for persons without water meters. In such a situation, the number of citizens registered in housing is taken into account.

These requirements lead to the fact that the consumer will be forced to pay much more every month than with existing meters.

Is it necessary to pay for the IPU verification service or not?

Users should check their water meters. This is done at your own expense, during the time period designated by the manufacturer (it is indicated in the meter’s passport).

Verification is paid service. It all depends on what region. The price varies from 400 rubles to 1000.

It is also worth noting that the cost of work when using a portable standard, without removing the device, and in the case of its removal, does not actually change.

It is not very difficult to keep track of the verification date and the organization of its implementation. Every home owner should always worry about proper operation devices on its territory. You can choose any method for checking water measuring instruments.

Frequently asked questions from residents

Question:I signed an agreement for annual monitoring and verification of the meter. The cost of the service is 600 rubles, for the past four years. I have been using water meters for 5 years. I was informed that the cold water meter needs to be replaced. For what reason? Everything works fine. Replacement costs money. I have 2nd degree disability. Money for extra years. What are the options?

Answer: water measuring devices must be checked once every 6 years for cold water and once every 4 years for hot water. The service provider sends appropriate notice. The price for such a service ranges from 350 to 1000 rubles. It is not necessary to change - this service and constant checks are imposed on you. Everything in this case depends only on your desire.

Question: I would like to know when the operating period of the water meter expires - from the moment of its release or from the moment of its installation?

Answer: The shelf life of water measuring devices is determined by the manufacturer of water meters. Devices from Germany and Italy work for 10-12 years, but are also very expensive. Domestic water meters work less - 5-7 years, and not all of them pass testing. We recommend that you do not bother with inspections; it is better to immediately purchase new devices. And it’s even better to buy imported ones once, so you’ll spend less (since they will last you longer).