Who said that crafts are not interesting to men, it’s just that if women read about how we do it with great pleasure, then for car enthusiasts there is no more interesting topic than do-it-yourself crafts for the garage. In fact, there are a lot of devices with which you can improve your garage life, so there will be something to do throughout the long winter.
Useful homemade products for the garage with your own hands
There are original, interesting products that you can make yourself, and there are useful homemade products for the garage with your own hands. First of all, such things include furniture: cabinets, tables, hangers. All this allows you to optimize the surrounding space as much as possible, especially if your footage is not too large.
Most often, during the initial arrangement, all the necessary furniture is ordered. But if you rent a room or don’t want to take money out of it family budget, then you will be able to settle down on your own, especially if you know how to hold basic tools. To help yourself and for inspiration, you can use the video from homemade products for the garage with your own hands (YouTube can please you with a variety of ideas), and you can also take into account tips on arrangement, which will be the basis for a successful layout.
If you look at the photo that shows the optimal set of useful furniture elements, you will notice useful nuances for yourself. First, the location of any storage system must be located at a certain distance from the walls. It is believed that there should be at least half a meter between a machine standing indoors and a rack for normal, comfortable work inside. If the shape of your car storage is more like a rectangle rather than a square (this happens quite often), then it is worth moving all the storage for tools and useful things to one area along the far wall opposite the door. This is where you can maximum convenience put not only a table or shelving, but even carpentry or lathe. It would be worth mentioning that all storage of your tools should be located inside the garage only if it is securely closed or protected by tightly closed ones. Otherwise, it is better to place there only the most necessary things, preferably those that are not of particular value to robbers.
If you provide them in a separate room, which is located on the territory of your suburban area, then it is better to make them the so-called attic type, that is, located in the roof, and choose a place just above such a working area. In the summer and spring, this arrangement of windows will help you save on lighting; there will be enough sunlight for all types of work, and you will also be able to ventilate the room, because ventilation cannot always cope properly, especially if you are going to work inside, like in a workshop.
If you have a total shortage of money or out of love for art, you can make an original storage system using old empty cans. Any motorist accumulates quite a lot of them over the course of a year, and if you ask your fellow neighbors, there will be enough for each compartment of such an interesting cabinet. Of course, there is nothing complicated here and to perform such homemade garage DIY video-lessons are not needed at all. You need to take a plastic canister and wash it well so that no traces of its contents remain. Armed with metal scissors, a knife or other tool, we cut off the front cover of the canister, but so that the sides remain and the contents do not fall over the edge. To make the structure more stable, you can fix it on the back wall using self-tapping screws, but we will, of course, drive them not into the wall, but into wooden slats, which we attach to dowels.
Do-it-yourself garage crafts photo
Continuing to explore options do-it-yourself garage crafts, photo which you have already seen and will see below, we must look at other ways of rational storage. If horizontal pull-out shelves simply do not fit inside, then you can make very original and functional vertical shelves. You will be surprised how many things they can accommodate, while the tools will be easily accessible and, as they say, “at hand.”
The same option as shown in the photo can be used in, where you also often need to set up a workshop, and even less space is allocated for it than is left in the garage. For such a design, you will need to build a frame from wooden boards, and make notches along its upper and lower edges where the cells will be inserted. Most likely, the inspiration for this design was the classic hives that are used for breeding bees; the system here is exactly the same. The sheets that are inserted inside have a perforated surface and the presence of these small holes will allow you to screw nails inside, hang hooks to hang tools and useful devices as convenient as possible so that they do not fly off when pulling out and retracting.
Exactly the same perforation can be included in a furniture set. Having such a complete set of everything necessary for a home craftsman, you can build many useful homemade products for the garage with your own hands, video with whom you are online. In popularity, such resources may soon overtake popular hand-made projects, because men, no less than women, want to make the space around them, their kingdom, beautiful, functional, and comfortable.
Interesting DIY crafts for the garage
Let’s digress a little from the useful and talk about things that are not mandatory, but no less useful than traditional furniture, machines, lighting or heating. Let's remember that for many men, the garage is a real men's club, where you can equip everything to your liking. We offer you a couple of options interesting DIY crafts for the garage, which support the automotive theme and can be used for long gatherings.
We are used to either simply throwing away tires that are completely worn out, or repairing them. Having spent the last winter set on a swan or a flowerpot, this year you can easily allocate it to your loved one by making a whole furniture set. Frankly speaking, for this purpose you will need not only car tires, but also bicycle tires, because they can be used to construct backrests, turning a stool into a chair.
Practice making such furniture and soon you will be able to replace your coffee table with one that not only looks beautiful, but can also become part of the original design concept.
A table and chairs are great; there will be somewhere to sit, but with the question of what to cook a delicious kebab on, our next idea will help. The fact is that an ordinary folding barbecue may not maintain the required temperature of the coals for a long time, and if you like to sit near the fire for a long time, you should make something larger. We will modernize it a little and present to your attention a grill made on the basis of a wheel rim. In order for the rim to support well set temperature and did not allow the coals to cool, it needs to be covered with bricks, but for maximum decorativeness of such a homemade product, it is better to file them a little using a grinder to fold them in a circle. The bottom must be filled with any available material, which does not support combustion, for example, fine crushed stone.
Homemade products for the garage with your own hands drawings
Again, returning from entertainment to business, you need to understand that for many, a garage can be an alternative to a workshop in which you can serve not only your needs by creating crafts for your apartment, cottage, or even car repair, but also fulfilling small orders. In order to make high-quality useful homemade garage do-it-yourself drawings, diagrams and technical recommendations you will definitely need it.
If you plan to spend quite a lot of time in your makeshift workshop, then among those you are interested in DIY DIY for the garage - heating, lighting, ventilation, that is, the arrangement of a fully comfortable stay inside for a long time. Some people prefer to install infrared heaters, but from the point of view of the cost of electricity this will not be a very rational option. A good option Water heating can be used, but it is best designed in garages that are located next to a residential building.
Solid fuel boilers You can place any design inside any type of garage, even make your own potbelly stove out of metal using a welding machine. But do not forget that with this type of heating, the interior decoration should be made of non-combustible materials, and the ventilation should be done efficiently, even at the stage when we need to promptly remove all combustion products from the room.
DIY homemade machines for the garage
Even if you are a non-professional carpenter or turner, you will still need the most convenient and compact machines. DIY homemade products for the garage can just become workbenches - tabletops on which various electric tools are attached, for example, a jigsaw, milling machine, lathe. Working surface made of metal will last you much longer than wood, so you can easily combine wood and metal.
The article discusses the most convenient and practical devices for the garage with your own hands, which can improve the operating comfort of this room. Here are detailed recommendations for the development and creation of structures intended for convenient storage tools and car parts, advice on making furniture, as well as arranging lighting and heating systems.
The garage is intended not only for storage, but also for servicing the car. For this reason, this room must be spacious, clean, comfortable and well-equipped.
To achieve all this, it is enough to take into account the basic requirements regarding the organization of space:
- The presence of shelves for tires and tool storage significantly saves free space and allows you to optimize space.
- The quality of lighting is of great importance, since not only productivity, but also the quality of small details depends on it. repair work.
- The construction of a garage workbench, machines, inspection pit and other devices expand the range of possibilities of the car owner regarding repairs and service vehicle.
Helpful advice! All these elements should not occupy space exceeding 10-20% of the garage area.
Options for shelves in the garage with your own hands: photos and tips for arranging storage spaces
About 80% of the shelves in the garage are built with your own hands to store garage accessories, namely:
- instruments and additional devices;
- components for the car;
- accessories.
Often in photos of shelves in a garage with your own hands you can see them combined with a rack, which you can also make yourself. Most often, the rack is considered as the main place for storing tools. After its installation, the remaining space is filled with comfortable and spacious shelves.
Be sure to designate a place where work clothes will be stored. It is not necessary to occupy a large area; you can get by with one shelf or even a hook (depending on your needs).
A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, and polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a sand tank.
To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.
Brackets and shelves for wheels in the garage: design features
The most bulky spare parts of a vehicle include sets of tires, which can be winter or summer. When to use winter option, summer tires are usually stored in the garage, and vice versa. Therefore, you should organize tire storage shelves or brackets.
The design of the bracket is as follows:
- Two triangular frames made from corners. Between these frames, jumpers made of any durable metal are installed.
- The triangular parts of the structure are fixed on the wall in a pre-selected location. The wheels should be installed perpendicular to the load-bearing element stands. In this case, the tires should fall slightly between the jumpers, thus being fixed on the shelf due to their own weight.
Helpful advice! It is recommended to place shelves for wheels in the garage with your own hands as close to the ceiling as possible. optimal height. Thanks to this, car tires will not take up usable area in the garage.
For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with discs, which can be placed one above the other in a horizontal position. The structure can be made angular and raised onto the wall.
- wooden beam;
- boards;
- chipboard sheets.
Installing tire racks is the most efficient way to store wheels. Greater savings in free space can be achieved by hanging rubber from the ceiling base along the garage wall. This option is possible if the room has a large height and reinforced concrete floors in the form of slabs on the ceiling. They will be used as a basis for screwing in dowels.
Tool storage: interesting ideas for a DIY garage
To organize a convenient area for placing things, you can make your own homemade and very spacious rack or shelves. Of course, you can find hundreds of ready-made models in stores, however, making a shelf in the garage with your own hands is much cheaper than purchasing a similar product on the market.
The same problem applies to shelving. By taking on the task of making your own tool storage space, you can not only organize a convenient and practical rack, but also fit it harmoniously into the garage space.
Helpful advice! The minimum load that the structure must withstand is 150 kg or more. In this case, the maximum load limit per section is 500 kg.
Rules for the manufacture of wood products:
- It is better to use hardwood, for example, beech, oak, hornbeam.
- Before assembly, it is necessary to treat the wood with antiseptic agents.
- The frame parts must be carefully polished to ensure safe operation of the rack.
- To make shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL slabs with a thickness of at least 4 mm are also suitable.
The thickness of the material is determined by the loads that will subsequently act on the rack.
Recommendations for making tool shelves in the garage with your own hands
Shelves are installed in cases where the garage does not allow for a shelving unit. It is better if there are several designs.
Scheme for creating shelves for tools:
- Plan the placement of shelves, determine their size and mark them.
- Prepare material in the form of boards and fasteners.
- Using a hammer drill, make holes in the wall and install dowels with hooks in them, which will provide enhanced fixation.
- Attach hangers equipped with eyelets to the boards. For metal hangers, it is recommended to use self-tapping screws or regular nails.
- Fix finished products using a building level, otherwise the tool may fall from the shelves, which makes operation unsafe.
Helpful advice! When making shelves, it is better to give preference to several short structures, since one long product can break under the weight of the tool.
At the final stage you can do decorative finishing products (paint or special film).
Technology for creating a tool rack in the garage
To create a rack with my own hands You will need boards 9 and 19 cm wide. The size of the structure can be adjusted.
Step-by-step technology:
- An element 9 cm wide is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.
- The board, the width of which is 19 cm, should be cut into pieces 36 cm long. Shelves will be made from these parts.
- On the board that will become the base of the product, it is necessary to apply markings in those places where there will be spacers. It is recommended to indent 2.5 cm on each side.
- The top spacer is glued, then the top shelf, which already has a spacer, is nailed to it. The same way the remaining parts are installed. Installation of the lower strut is carried out at the end.
- The structure should be turned over and the spacers should be screwed together with the base of the product.
- The surface is thoroughly cleaned using sandpaper. After this, the product must be coated with two layers of oil-based varnish or another type of finishing.
- The structure is fixed to the wall using anchor screws. Fixation should be done both under the top and bottom shelves.
Helpful advice! To strengthen the product, wood blocks should be installed between the sections. They will allow you to evenly distribute the load throughout the rack.
Organization of lighting and heating systems in the garage
To make the operation of the garage comfortable, the lighting, ventilation and heating systems in the room should be properly organized. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in confined spaces is especially acute. For a garage, vents are suitable for brickwork. They are equipped with grilles.
Factors affecting lighting levels:
- garage area, its height;
- the number and nature of the placement of work areas (sizes of a workbench for a garage, inspection pit, number of machines);
- type of decoration on the walls, its colors;
- indicator of network power density per 1 m²;
- type of garage lights.
To maintain the optimal temperature, various types of heating can be used:
- gas;
- based on waste oil;
- air;
- electric ( infrared heater for garage);
- oven;
- water;
There are many alternative ways organize your own heating system.
Features of halogen, fluorescent and LED garage lights
The technical characteristics of halogen lamps are in many ways similar to incandescent lamps, but their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include a long service life - 4 thousand hours.
Helpful advice! Products must be placed in lampshades. It is also worth considering stabilization aimed at protecting against spikes electrical voltage. It is not recommended to touch such lamps with your hands (the shelf life will be reduced).
Fluorescent lamps are filled with inert gases inside. The inside of the flask is coated with a specialized composition that emits ultraviolet light under the influence of an arc-type discharge. Recommended models include IP-65 class products, protected from moisture and dust particles.
Installation LED lighting in the garage comes with the highest costs. However, they pay for themselves in 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components, and the light does not have an aggressive effect on the eyes, so there is no need to purchase additional lampshades.
Installing lighting in a garage: how to calculate
To calculate the power of conventional lamps, you can use the formula:
P = S x W/N.
Explanation of values:
- P – total required power, W/m².
- W – power of one lamp, W.
- N – number of lamps (luminaires), pcs.
- S – room area, m².
For halogen and LED lamps, the optimal indicator is 16-20 W/m². This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.
The calculation is influenced interior decoration room walls. In dark garages, the lighting should be brighter.
Light reflectance level:
| Room area, m² | Ceiling height, m | Wall color | |
| Dark | Light | ||
| 20 | less than 3 | 0,6 | 0,75 |
| 50 | 0,75 | 0,9 | |
| 100 | 0,85 | 1 | |
| 20 | 3-5 | 0,4 | 0,55 |
| 50 | 0,6 | 0,75 | |
| 100 | 0,75 | 0,9 | |
| 50 | 5-7 | 0,4 | 0,55 |
| 100 | 0,6 | 0,75 | |
To illuminate the inspection pit in the garage, it is recommended to use low-power lamps with halogen or LED lamps, since moisture accumulating in this place can cause an electric shock. The devices are mounted on the sides in pre-made recesses.
Helpful advice! To prevent an accidentally dropped tool from breaking the lamp, the design of the lamps can be made retractable. When the pit is not in use, the devices are securely hidden in the recesses.
Do-it-yourself autonomous lighting system in the garage
There are a number of principles on the basis of which an autonomous lighting system is implemented:
- LED strips are mounted inside the lampshades (there are 300 diodes per element).
- The switch is output strictly to the panel.
- A suspended ceiling system is used for electrical wiring.
- The wires are powered by a battery connected to the network via a charger.
A multi-level lighting system for a garage is considered the most optimal. It involves installing a large lamp in the middle of the room and installing small lamps in work areas.
Height calculation for a multi-level system:
| Level | Height, m |
| 1 | ceiling base |
| 2 | 1,8 |
| 3 | 0,75 |
| 4 | 0,4 |
The lamps are installed correctly if the machine does not cast a shadow on either side.
Which heater to choose for a garage
Heating of the garage is carried out using small portable devices that are able to warm up the room in a short time and subsequently maintain the optimal temperature.
Having thought about which heaters are best for a garage, many mistakenly believe that a homemade device can be made exclusively from expensive components and requires a significant investment of time. For this reason, garage owners refuse this idea.
In fact, to make a garage heater with your own hands, it’s enough to limit yourself to: budget materials, for example, thermal film. The scheme for creating such a device is very simple and involves the use of the following materials and tools:
- a kit intended for assembling a heater;
- wire equipped with a plug;
- paper laminated plastic (area of one element 1 m²);
- graphite powder;
- epoxy adhesive composition.
Helpful advice! Be sure to have a multimeter with you. This tool is useless when assembling the device, but it will be needed to check for functionality.
Thermal, or - a common heating option in the garage
Recommendations for assembling a homemade garage heater
Step-by-step instructions on how to make a garage heater:
- A mixture of glue and graphite powder is made. The more powder in the composition, the stronger the heating of the device will be. The average temperature ranges from 60-65°C.
- Plastic sheets on the rough side are coated with a mixture of glue and graphite, which is applied in zigzag strokes, after which they are fastened with their faces and fixed with a frame made from wooden slats.
- Terminals are attached to the graphite conductors and the structure is dried. Drying must be complete, otherwise moisture will damage the device.
After the heater has dried, the resistance should be checked. A garage heater is considered safe only after this check. Until this point, it is strictly forbidden to connect the device to the electrical network.
Safety restrictions:
- It is not recommended to leave the device switched on unattended or near children.
- It is prohibited to use equipment that can cause a fire.
- Do not place flammable substances or materials near the device.
Making useful gadgets for your garage with your own hands
To carry out repair and maintenance work, you will need to build inspection hole in the garage with your own hands, the dimensions of which will correspond to the dimensions of the car, as well as a workbench for comfortable work, plus equip the premises with machines.
The basic set of tools and materials for creating a homemade garage workbench includes:
- boards and wooden blocks;
- fasteners and ties;
- plane and other woodworking tools;
- varnishing and carpentry adhesives;
- sandpaper and drying oil.
Example of placement in a garage useful devices: 1 - with manual machines, 2 - racks and cabinets, 3 - table for various repair work, 4 - shelf for storing tires, 5 - inspection hole
Technology for making a workbench in the garage with your own hands: photos, drawings
The workbench consists of a table top and a base, as well as several clamping devices. The height of the workbench in the garage should be selected taking into account your own height. You can take the height as a guide kitchen table in a house that is convenient to work in. Be sure to make drawings to create.
Helpful advice! Ready-made drawings of a workbench for a garage, which can be found on the Internet, are suitable as a basis for self-made designs. If desired, you can customize it to suit your needs.
Garage arrangement: how to make a workbench indoors:
| Work stage | Details, size in cm | Mounting type |
| Assembling the tabletop | 20 boards (5x10x200) with grooves 2.5x2.5 in the 5th and 16th element (step 25) | Adhesive composition metal ties |
| Drying | - | - |
| Making legs (4 pcs.) | Block (10x10x80) with grooves for brackets on the front supports | Brackets |
| Assembling the base of the underframe | Frames (2 pcs.) made of boards (5x10) | Tenon connection to a depth of 2.5 cm and bolts |
| Fixing the side and rear support walls | Chipboard boards (thickness 10 mm) | Screws |
| Fixing the tabletop to the upper frame | - | Bolts |
Final processing involves impregnation finished product drying oil and opening with varnish.
Recommendations for creating a viewing hole in the garage with your own hands
There are no specific sizes for a garage inspection pit. The dimensions of the car are taken as the basis.
How to make a viewing hole in a garage with optimal parameters:
- The width is selected so that there is enough space inside to work. The size is limited by the distance at which the car's wheels are seated. Each wheel needs small area to perform maneuvers. The average pit width is 0.8 m.
- The length of the pit is limited by the length of the machine. 1 m should be added to this indicator.
- The height of the garage owner is used to calculate the depth. Another 10-15 cm is added to it.
How to properly make a viewing hole in a garage using different materials:
| Material | Wall thickness, cm |
| Ceramic brick | 12-25 |
| Concrete | 15 |
| 20 |
The pit is dug taking into account the optimal width of the pit, the material chosen for the walls, as well as the thickness of the waterproofing layer. Stages of creating a pit:
- marking;
- construction of a pit;
- arrangement of the pit;
- construction of walls;
- lighting gasket.
For waterproofing walls, specialized hydrophobic impregnation is used.
Helpful advice! Using formwork, you can make reinforced recesses in the walls of the pit to accommodate tools and lighting fixtures.
Making a garage press with your own hands
To create a press, a frame measuring 178x80 cm should be made from 4 pieces of metal pipes. These elements are connected by welding. It is recommended to be guided in your work by drawings, selected or compiled in advance. After this you need to install:
- retainer;
- removable stop;
- bottle jack (hydraulic).
You can use video materials to review the detailed technology for creating useful devices for the garage with your own hands. Such visual recommendations help to navigate the size, master step by step instructions and imagine what appearance must have a ready-made design.
Manufacturing diagram: 1 - upper power platform, 2 - nuts, 3 - lower platform, 4 - studs with a diameter of 30 mm, 5 - lower thread of the studs, 6 - hydraulic jack bottle type; 7 - base 20 mm thick
You can do it yourself. The list of useful devices does not end there. It can always be supplemented with any interesting ideas. The main thing is that the garage fully meets personal requirements in terms of comfort and convenience.
Order in the garage means convenient open storage all frequently used tools and compact storage of various small items “in reserve”.
Often the garage and home workshop are combined, so all tools and consumables must have convenient system storage
As soon as the storage system becomes not very convenient for regular maintenance, the garage again turns into a spontaneous warehouse.
It is better to use open shelves to store tools in the garage. It will be very convenient if these shelves are removable.
In the garage of the workshop it is necessary to place not only the usual set of tools for a car enthusiast and a home craftsman, but, sometimes, garden tools, and travel equipment.
Make the most of the entire height of the room. IN plastic boxes under the very ceiling and on the floor you can put those things that you use from time to time.
A tool storage system in a garage uses the entire wall area as a stand. Separate sections-shelves for storing tools and Supplies.
Wooden guides are used here, but it is better to use metal pipes for these purposes. If over time the guide we see in the photo crumbles, a box with a heavy tool could fall right on your foot.
You can make such an organizer for storing consumables yourself from sheets of plywood, which are connected with hinges in the form of a book.
A lockable stand-box for home craftsman's tools will allow him to easily maintain the necessary order in the garage.
Metal mesh is convenient for storing paint cans, fertilizer bags, etc.
Metal guides and metal shelves not only ensure safe tool storage, but are also easy to clean.
It is inconvenient to keep a power tool in a company suitcase; it is much more convenient to make such an open stand for storage.
The owner has a lot in his garage necessary little things and each of them has its own storage method.
Most tool storage methods are simple, but still more effective.
Very convenient design for storing consumables! The box with self-tapping screws that you use is secured to a separate panel, and upon completion of work, it is pushed into a common organizer.
Each owner has his own scope of activity and different quantities tools. But a convenient organization of work always makes you want to do something more. Take the time to tidy up your garage.
Sliding panels provide additional storage space for tools. Make sure that they will work reliably without getting stuck in the grooves, otherwise this storage method will not be practical.
Simple and convenient. Store your instrument wisely! If you don’t have a garage, and you store all your tools in a small box on the balcony, then even there you can organize a small work cabinet.
Let's continue for the happy owners of the garage. Here is a convenient way to store clamps.
Some storage ideas can be found in stores that sell tools.
But our garage contains more than just tools. We also have pipes, planks, and the necessary pieces of plywood and plastic.
It's not difficult to assemble one like this ceiling structure from pipes and in your own garage.
Large sheets of plywood and drywall are best stored this way - in a vertical position.
For scraps of plywood, plastic, etc. You can make a wall rack like this.
Even a dozen boards can create a mess in your garage. Let's do it simple design for storage.
Another convenient way to store long pipes and all kinds of strips in the garage.
A small workbench can also serve as a storage place for boards and pieces of plywood.
You don't have to clean out your garage in one day. All this can be done gradually, step by step.
Absolutely anyone can make accessories for their garage with their own hands. With the help of such products, the owner of the premises will free up a lot of space, and tools and equipment will always be at hand.
A workbench is a necessary product in every garage
A homemade workbench should be in every garage. It does not take up much space and makes it possible to comfortably carry out repairs and manufacture useful crafts. Typically a workbench is made from strong wooden planks that are attached to a thick wooden beam or profiled pipe. Often workplace made from steel billets. They are quite easy to cut and fasten into one robust construction using metal corners and universal screws.
To make a workbench, as well as other machines for the garage, you need to draw an accurate design plan. At the same time, take into account the space that will be allocated for the product. It is best to place the structure next to shelves or racks. In the drawing, note the presence of drawers and shelves. You will store small fasteners and tools in them. You can also attach a compact vise to the tabletop. Having drawn up a plan, start making the workbench. First, we assemble the tabletop.
If you have small room, then there is no point in making a large homemade product for it. You can connect the boards together using good glue and metal ties. As a rule, the tabletop of a standard workbench consists of 5–10 identical boards. Next, we make special grooves measuring 2.5x2.5 cm on the tabletop. They are needed for stops. As soon as the glue on the product has dried, the surface must be planed. The result should be a perfectly smooth coating. The legs for the structure can be made from several bars measuring 80x10x10 cm.
We make grooves in the front legs into which the brackets will be inserted. In the future, the latter will be connected to the longitudinal beam of the tabletop. Then we assemble the base of the underframe. It consists of two frames, which are made from 5x10 cm boards. The base is attached to the support, after which the frames are cut into the legs of the workbench by 2.5 cm. At the end, we secure the components with bolts. Then you need to attach the back and side support walls to the workbench. For their manufacture, sheets of chipboard or centimeter plywood are taken.
The last step will be connecting the tabletop and the upper frame. To do this, you should use powerful bolts. Afterwards we apply drying oil to the surface of the workbench. As soon as it dries, we treat the surface with varnish. As a result of the work, you received a stable structure on which you can not only repair spare parts or make various crafts, but also store tools.
Making a rack - about a complex design in simple words
Every driver probably has a lot of large garage equipment that there is no place to store. Where can you find a place for them so that you can quickly find the right tool? The correct answer is on the rack. This design will allow you to organize free space and save a lot of time. Similar devices for the garage can be made of wood or metal. The second option is more reliable, but it is quite difficult to implement on your own.
The first one is much easier to complete, however, in order for the structure to last for a long time, it is worth choosing strong wood species for the work. Beech or oak are perfect for this. Boxes and shelves made from them can withstand significant loads. In principle, the norm for a rack is the ability to withstand a weight of 150–180 kg. In practice, only a few adhere to these recommendations. However, it is definitely worth remembering that the maximum weight of all tools on the rack should not exceed 300 kg. Otherwise, this design will become dangerous for the garage owner himself.
Making a rack with a complex design is very difficult. It requires significant effort, a lot of time and equipment. It is not much inferior to a simplified product, the manufacturing algorithm of which we will consider in more detail. So, the operating procedure is as follows:
- 1. First you need to take a board 9 cm wide and cut it into pieces of different sizes. In the future, these parts will play the role of supports for the structure.
- 2. For shelves you will need to take a thicker board. It must be cut into several identical parts.
- 3. Next, take a board for the base of the rack and mark on it the points at which we will make spacers. They should be located at a distance of 3 cm from the edges of the base.
- 4. Attach the upper spacer using superglue. We nail it to it top shelf. The same manipulations must be repeated with other spacers and shelves. The bottom expansion part should be attached last.
- 5. Then you need to turn the assembled product over, tighten the base of the rack with spacers, using screws for this.
After the work done, your rack is almost ready. At the end, all you have to do is clean the surface of the rack sandpaper and treat it with oil varnish. It is best to apply the latter in 2 layers. Attach the structure to the wall with powerful anchor bolts, screwing in fasteners under the upper and lower shelves of the structure.
Cyclonic vacuum cleaner and press - useful homemade products for those who like to tinker
The list of homemade machines and devices must include a press. This clamping device will an indispensable assistant to every lover of home creativity. To make a press you will need a hydraulic jack, a metal platform bed and 4 profile pipes. Two of them should have a cross-section of 4x4 cm, and the rest - 6x6 cm. To make a press, we take two pipes with a smaller cross-section and attach them to the base of the product. At the very top, between these pipes, we weld another pipe with a larger cross-section.
Install the remaining pipe so that it can easily move along the previously installed guides. The device made in this way works on a very simple principle. To connect two products, they need to be placed on the base of the press and covered with a thick plywood sheet. The pipe with the jack installed must be lowered, and then the two short pipes must be turned. By making this simple movement, you will securely connect the two previously supplied products.
Second device - cyclone vacuum cleaner, it will help you always keep your garage perfectly clean. To make it, prepare a plastic or metal container. An important nuance is that the lid of the vessel must be tightly closed. Next, we make 2 small holes in the lid. The first should be located in the center, and the second close to the edge. The hole diameters and cross-sections of the hoses you use must be the same. We connect the pipes to the holes. The first will serve to collect garbage, and with the help of the second you will connect a regular vacuum cleaner
Install a plastic elbow into the inlet pipe. With its help, air will be sucked into the device, like a cyclone. Thanks to the presence of this elbow, the vacuum cleaner will be able to suck in not only dust, but also small stones, sawdust, lumps of dirt and other small debris. All this will remain in the container to which you connected the hoses. If you wish, you can not equip the vacuum cleaner with a knee. But in this case, you will not be able to remove garbage, only dust. In such a device, it is best to use a plastic container and narrow hoses. If you need a more powerful device, then you should make a vacuum cleaner from large hoses, an elbow and a steel container.
Device for making ropes - ropes from plastic bottles
When heated, plastic bottles shrink quickly. Thanks to this, we are able to make fairly strong ropes from them. With their help, the garage owner will be able to connect several different products that are used on the farm. To create the device, you need to find two bolts with nuts and washers, a piece of thin board, an electric drill and a utility knife. After that, take two washers and place them in the middle of the board. The centers of the washers should be marked on the board with a marker. We drill holes at the resulting points.
Next we drill holes with reverse side boards. This must be done to prevent rotation during operation of the device. The next step is to screw in the bolts. We are testing the device. We put several washers on the protruding ends of the bolts. The final thickness of the rope will depend on the number of bolts. Next, place a stationery knife or a small piece of it on top of the washers. We secure the device with additional washers screwed in until it stops. Next, the device must be fixed on the desktop using clamps.
Then we take a two-liter plastic bottle, cut off its bottom and cut a strip in the remaining part. We place the latter on the device so that it is located under the knife. Next, we take the strip with one hand and pull it, while holding the plastic container with the other hand. As a result, from one unnecessary 2-liter bottle you will get about 20 linear meters ropes.
How to make a viewing hole - detailed instructions for beginners
Whatever one may say, sooner or later the car has to be repaired. And so that the car owner does not have to crawl under the car and “squirm”, bending double, it is necessary to dig a hole in the garage floor for inspection and repair. First of all, those who want to do this must mark the area of the room where the car is parked. To do this, the area of the garage is marked with chalk. When creating markup there are several things to consider: important factors. The length of the pit must correspond to the length of the car, and another 1 meter must be added to this value. The width should be such that it is comfortable for you to work. However, be careful - this value should not be greater than the distance between the wheels of the car.
The depth of the hole is calculated taking into account the height of the garage owner. Another 20 cm is added to this indicator.
“Having taken measurements”, start digging a hole. Once you've done this, think about the arrangement inside. First of all, this concerns the walls of the pit. For this purpose, brick, building blocks or concrete can be laid on the sides. The thickness of the walls directly depends on the material. So, if you use ceramic brick, then this figure should be equal to 20 cm. If you purchased cement, then the thickness of the walls should be 12 cm. If you want to make walls from blocks, then their thickness should not exceed 22 cm.
Do not forget that the walls of the pit will require hydrophobic impregnation. It will protect materials from moisture. Impregnation must be applied with inside bricks or blocks. To make entry and exit more comfortable, we make steps in the front part of the pit. It is best to use cement for this. You need to start from the lowest step, gradually rising higher. Each of the staircase elements must be the same. To achieve this, first measure the height of the rise and calculate the number of steps.
Shelves in the room - for storing loose fasteners and more
Sometimes the garage space does not allow you to make and install a large, spacious shelving unit. In this case, you can make shelves of different sizes. They will be attached directly to the walls at any height convenient for you. This will make it possible to save space on the floor of the room. First of all, you will need to determine where the shelves will be fixed. On the selected section of the wall we make approximate markings, dividing the area into equal squares. Dowels will be screwed into the corners of these squares to hold the shelves.
To screw in the fasteners, drill holes for them using a hammer drill. If possible, it is worth purchasing special dowels with hooks at the ends - they will provide better fixation of the products. Next, we take a thin board and attach hangers with eyes to it. When calculating the distance, be guided by the markings you made on the wall surface. To secure metal hangers, use reliable self-tapping screws. After that, all that remains is to make the shelves. We take several boards and cut them into equal parts - they will serve as bottoms for the products. Then we cut out the walls of the shelves from thicker boards. We nail or glue them to the bottoms. If desired, the products can be painted or varnished.
The final stage will be the installation of finished shelves in the designated places. When installing each of them, carefully ensure that the products stand level and move freely along the guides. If you want, you can glue turned wooden handles to the front walls of the drawers. It will be more convenient to use the shelves with them. Very interesting idea will be making shelves from plastic canisters.
If you have a sufficient number of these containers, and in the future you do not plan to use them for their intended purpose, then you can use them according to this principle. First, we cut holes in the outer walls of the canisters. At the same time, make sure that only the right or only the left wall of each container is cut off. Otherwise, the shelves will look inorganic. After cutting out the outer walls, clean the plastic from burrs. To do this, use a file. After this, all that remains is to install the shelves in place in the wall or use them as drawers in the shelving unit.
An ideal garage should organically combine the functions of a reliable shelter for a car and a well-equipped place for performing various repairs and other work. There are a number useful recommendations on the interior arrangement of the garage, with the majority necessary equipment you can make it yourself without spending money on buying them.
Work on the interior arrangement of a garage involves the use of many different useful devices. Read the suggested instructions and your garage will become the most convenient and comfortable.
Usually in the garage you have to store not only the car, but also many tools and other accessories. For convenient placement All this needs to be done is to equip the garage with racks, shelves, hooks and other similar devices.
The best option is a spacious rack. You can do it yourself. Fill in the remaining free space convenient shelves. There is nothing complicated in making them either. More detailed instructions you will receive next.
Get to grips with your tools. Arrange them according to frequency of use. The items you use most often should be stored in the drawers closest to the workbench. Store heavy equipment on the lower shelves of the rack; allocate space near the ceiling for spare tires - you will need them least often.
Secure the brackets
These devices will help you conveniently store replacement tires. Place the brackets closer to the ceiling, so the wheels will not take up useful space. For tires, buy large bags, or better yet, special covers to protect them from dust.
He's a workbench. The structure can be easily assembled with your own hands from boards and bars. You can attach a vice and other tools needed in the garage to the table. It is more convenient when the workbench is installed next to shelves and racks.
Organize your lighting system wisely
You will need several lamps: above the place where the car hood is usually located, above the desktop, in others important places garage. Ideally, the lighting system should be organized so that you can turn on all the lamps at the same time and each of them separately. An ordinary double switch will help you do this.
Install an outlet near your garage door and above your workbench.
Designate a place to store your work uniform. One shelf or at least a basic hook will be enough. Also provide a place to store work shoes and personal protective equipment.
Security questions
Substances such as gasoline, oil, etc. are stored in the garage. To store them, you need to allocate a separate cabinet or at least a shelf not far from the gate. Place a box of sand nearby and hang a fire extinguisher on the wall.
Each tool in the garage must have its own place, otherwise there will simply be no order in the room. To organize convenient storage of things, collect homemade rack. Ready-made models are quite expensive, and do not always meet the needs of a particular person. Therefore, it is much more profitable and rational to make a rack “for yourself” right away.
Assemble the rack in such a way that it can withstand a load of at least 150 kg. In this case, the load on each individual section should not exceed 500 kg. The rack can be assembled from wood or metal. The design can be straight or angular.
As for wood, preference should be given to the most durable species such as oak, hornbeam, beech, etc. Everything before assembly wooden elements structures are treated with antiseptic impregnation. Thanks to this treatment, the wood will be more resistant to moisture and various bacteria and will last much longer.
If possible, plan and sand all frame elements with high quality.
Make shelves from plywood or chipboard. DVL and OSB boards are also suitable. The main thing is that the plate has a thickness of at least 4 mm. The higher the expected load on the shelves, the thicker they should be.
To give the shelves a more presentable appearance, it is recommended to cover them with decorative film or paint them. Also, such processing will allow you to better get rid of contaminants in the future.
The simplest rack is made in several steps. Complete each of them in sequence. Various sizes will be given below. You can stick to them or change the dimensions at your discretion.
First step. Take a 9 cm wide board and cut it into several pieces of different lengths: 30 cm, 27.5 cm and 18 cm. From these pieces you will make spacers.
Second step. Take a board 19 cm wide and cut it into the required number of 36 cm long sections. From these sections you will make shelves for your rack.
Third step. Mark on the board that serves as the base the places for attaching the spacers. It is recommended to install spacers at a distance of 2.5 cm from each edge of the base. Glue the top brace in place, then nail the top shelf to it with the pre-attached brace. Do similar manipulations with the remaining spacers and shelves. The bottom brace is attached last.
Fourth step. Turn the rack over and tighten the spacers to the base of the structure using screws.
Fifth step. Carefully sand all wooden surfaces and apply a double coat of oil varnish. If you wish, you can cover the shelves with decorative film or decorate them with other material at your discretion.
Sixth step. Attach the shelving unit to the wall using anchor screws. Place fasteners under the lower and upper shelves.
Using this scheme, you can assemble a rack from the required number of sections. To strengthen the structure, place wooden blocks between the sections. This will help distribute loads evenly throughout the system.
If there is no space to install a full-fledged rack or, on the contrary, you have installed racks and there is little unoccupied space left, be sure to make several convenient and simple shelves for storing various accessories.
First step. Determine where to place the shelves. Accordingly, set the required quantity and optimal sizes products.
Second step. Prepare the required number of boards and fasteners in accordance with the plan drawn up at the previous stage.
Third step. Mark on the walls where the future shelves will be attached.
Fourth step. Armed with a hammer drill, prepare holes in the walls in accordance with the markings and screw dowels into them. It is best to use dowels with hooks - they will provide more reliable fixation shelves
Fifth step. Attach eye hangers to the board. When choosing a distance, refer to the markings on the wall. Use self-tapping screws to attach metal hangers. If you don't have them, you can get by with ordinary nails.
Metal shelves
Metal shelves for garage
Metal shelves
Sixth step. Fix the finished shelves in their intended places.
Remember: it is better to make several short shelves than one long one, which will break under the weight of the objects placed on it.
If you wish, you can decorate the shelves, for example, cover them with film or paint them. Make sure the shelves hang level. A tool called a level will help you control this moment.
To make working in the garage as comfortable and productive as possible, assemble and install a workbench in a convenient place. You can use it to repair both car parts and other household items. A homemade workbench has a big advantage over a ready-made factory-made model - you can make a table of the size that you need.
Workbench assembly kit
- Boards.
- Bars.
- Fasteners.
- Plane.
- Ties.
- Tool for wood processing.
- Wood glue.
- Sandpaper.
- Drying oil.
First step. Think it over optimal design workbench. The main elements of such a product are the underframe and the tabletop. The design also includes one or more clamping devices.
Second step. Assemble the tabletop. The best option is a tabletop made of 20 boards measuring 200x10x5 cm. Prepare grooves for stops measuring 2.5x2.5 cm in the 5th and 16th boards. Place the grooves in 25 cm increments.
Use glue and metal ties to connect the boards. Before gluing, the surfaces of the boards must be planed.
Third step. Plan the dry tabletop thoroughly. You should get a smooth, flat surface. Over time, the wood will shrink. You need not to miss this moment and tighten the nuts on the ties in a timely manner.
Fourth step. Make the legs. To do this, use high-quality blocks measuring 80x10x10 cm. Make grooves for the brackets in the front supports. The brackets will later be connected to the longitudinal beam. This type of beam is commonly used in the construction of window frames.
Fifth step. Assemble the base of the table from two frames and fasten it to the supports. Assemble the frames from 10x5 cm boards. Use a tenon joint. The frames are directly cut into the table legs to a depth of 2.5 cm and bolted to them. Attach to bottom frame plywood sheet. A sheet 1 cm thick will be enough.
Sixth step. Attach the side and back support walls to the table. To make walls, use chipboards or plywood 1 cm thick. Build a convenient cabinet with a hinged door on the left of the table.
Seventh step. Connect the workbench top to the top frame using bolts. It is recommended to prepare the holes for the bolts in advance - this will make connections faster and easier. Tighten the bolts so that their heads are recessed into the wood.
Eighth step. Make a miter box. This device will help you in the future to cut workpieces at the required angles. The miter box is assembled from wooden strips 2 cm thick. Attach the finished miter box to the table using stoppers.
Ninth step. Process yours homemade workbench drying oil and varnish. Let the paint dry and you can start using the table. If necessary, install a vice on it or, for example, circular saw. At this point, focus on your needs.
Video - DIY garage accessories
