How to stick baguettes on the wall. How to glue a ceiling plinth: features of installation of different types of fillets. How to glue foam ceiling moldings

Baguettes for the ceiling are decorative skirting boards of different widths and appearances, which are used to aesthetically decorate a room and give it a harmonious appearance.

It is advisable to complete any renovation in a room by installing such skirting boards, because without them the ceiling joint with the wall will be unsightly. The method of gluing baguettes is simple, but requires strict adherence to the instructions.

Properties and features of baguettes

Baguettes (other names: moldings, baseboards, friezes, fillets) perform a number of practical and aesthetic functions. First of all, they are designed to elegantly design the transition from the wall surface to the ceiling. Also, baguettes perfectly mask small defects in walls and ceilings: differences, unevenness, roughness. You can use baguettes with any type of finish: they attach perfectly to concrete, putty, paint, and wallpaper. The advantages of using skirting boards are obvious:

large assortment in shape, color, size;
flexibility, the ability to work around uneven walls;
ease and speed of installation;
low price of most models;
used in all interior styles.

Calculating the required number of baguettes is very simple. You need to measure the perimeter of the room and divide the figure by the length of one product (usually it is two meters). The result should be rounded and a couple of skirting boards should be added in case of unforeseen damage.

Types of baguettes

Depending on the material used, ceiling plinths are divided into the following types:

Foam. Polystyrene (foam plastic) is the cheapest and lightweight material. Baguettes made from it are attached to glue, putty and hold securely on the surface. Due to low moisture resistance, it is not recommended to use them in rooms with high humidity.
Polyurethane. These are expensive and high-quality baguettes. Polyurethane can be used in any operating conditions; it has a smooth surface, density, and does not need to be painted.
Plaster. They are characterized by low moisture resistance and can be damaged from physical impact, but they are very beautiful and give the overall picture of the room an expensive look. Most often they are installed in public places, hotels, restaurants. For rooms with ceilings below 3 meters, the use of gypsum moldings is impractical.
Wooden. Lightweight baguettes can be attached with glue, heavier ones - only with self-tapping screws. Wood products can be painted; they are resistant to mechanical damage, but are not suitable for the bathroom.
Plastic. This type baguettes cannot be painted, but they practically do not react to humidity and can be installed in any room. Basically, plastic skirting boards are used in conjunction with stretch ceilings.

For long, narrow rooms good option– wide baguettes. In rooms with low ceilings, it is worth gluing thin skirting boards. For curvy classic interiors large, pompous-looking products for stucco molding are perfect, while for high-tech and minimalism they buy modest white baguettes without relief or patterns. To make the walls taller, the molding must match the color of the ceiling, and to visually lengthen the room it is matched to the shade of the walls.

Choosing glue for baguette

All compositions suitable for gluing can be divided into silicone, acrylic and polymer. First you need to purchase the baseboard itself and only then buy glue for it, because the composition must ideally match the finishing material. The cost of adhesives varies, but there is no need to save too much: with low adhesion, the baguette will quickly come off, often this happens even during painting. Heavy fillets are additionally attached to self-tapping screws, the heads of which are then carefully covered and painted over.

Adhesive putty for baseboards

The easiest way is to use regular paper for gluing baguettes. finishing putty or compositions for finishing drywall, which are often left over from major repairs. The acrylic mixture, sold in the form of dry powder in bags, is best suited. This method of fastening has a number of advantages:

quick adhesion to the base;
reliability, good adhesion;
savings (if the putty was purchased for other work);
environmental friendliness of the composition;
no odor, can be used without ventilating the room.

There are also disadvantages to using putty as glue. Applying it in a very thin layer is quite inconvenient, because the baguette is narrow and long. Before use, each batch of dry mixture will have to be diluted and the floor covered. The last point is related to the difficulties of removing dried material from any surfaces. If applied carelessly, pieces of putty may stick out from under the baseboard, so you need to work carefully and slowly.

Special purpose adhesives: “Moment”, “Titan”

Professional adhesives are characterized by high viscosity and a sufficient degree of adhesion, do not spread and can hold severe types baguette They are widely used experienced craftsmen, because they are easy to use, economical and dry very quickly.

Special adhesives also have disadvantages. Most of them contain solvents, so after gluing the baguettes there will be bad smell, and the room needs to be ventilated regularly. For fragile, thin foam that does not have polymer coating, such products may not be suitable: they will ruin the inside of the baseboard and dissolve it.

Liquid nails

This type of glue combines perfectly with all types of ceiling moldings. Due to their high adhesion and adhesion, liquid nails hold even heavy products on the ceiling without losing strength for many years. The skirting boards glued with them can be washed and painted several times without compromising the quality of adhesion.

For work with ceiling fillets, the following types of liquid nails are used:

Neoprene. They are moisture resistant, so they are recommended for work in damp areas. The composition contains organic solvents, therefore they are harmful to health until completely dry and require regular ventilation of the room.
Acrylic. They are used only in dry rooms, since they are diluted with water and do not contain solvents. They are less resistant to damaging factors, but are considered environmentally friendly and can even be used in children's institutions.

How to attach baguettes to the ceiling

There are two the right way gluing ceiling moldings. The first is joining before wallpapering, the second is gluing directly to the surface of the wallpaper. The technology for carrying out the work will be different depending on the chosen method. In any case, before installing the baguette, you need to wash your hands thoroughly so as not to stain the snow-white products, and also take care of safety (wear a respirator, ensure the room is ventilated).

Surface preparation

If the base is clearly uneven, before gluing the fillets it will have to be leveled with plaster or putty, which is especially important when working with plaster and wooden baseboards (they are less flexible). The closest attention is paid to the ceiling and walls in the corners: there all the irregularities after attaching the baguettes will become most noticeable. Minor defects can be left unchanged, but then it is better to use polyurethane or polystyrene foam baguettes, which easily hide such defects.

For puttying, purchase a suitable dry construction mixture and dilute the portion with water according to the instructions. Fill the recesses with the mass. To give the wall perfect evenness, apply thin layer putty over the entire area. The last layer is made as a finishing layer, using a fine-grained snow-white mixture and leveling the mass with a wide spatula. Likewise prepare the ceiling (at least in the place where the baguette will come into contact with it). If the ceiling is smooth and painted, no preparation is required.

It happens that the wallpaper is already pasted, and only the baguette needs to be changed. In this case, you need to prime the areas that will be covered with baseboards and let the primer dry. After the installation of the baseboard is completed, before painting, the part of the wallpaper in contact with it must be covered with masking tape so as not to get dirty.

For styling LED strip It is recommended to make markings in advance, ensuring that the baguette does not fit tightly to the ceiling. Usually draw a line with a pencil 3 cm from the ceiling - the upper border of the baguette will run along it. There is another marking option: drive in nails at the required distance, pull a thread, which you can use as a guide when installing the plinth.

Preparing the baguette

Professionals immediately cut the baguettes for convenience, then you don’t have to be distracted by this process in the midst of work. But beginners should not do this; it is better to take all measurements and cuts directly during installation. If possible, glue the baguettes without joints, making them solid. Parts into corners (external and internal) are cut using a miter box, although specialists often do this by eye.

Materials and tools

To work you will need required quantity baguettes and glue, as well as some accessories and tools:

brush or spatula for applying glue;
glue gun for liquid nails;
stationery knife;
miter box;
masking tape;
rags or wet wipes.

How to glue polyurethane baguette

apply glue to the fillet (on thin, light fillets - dotted, on heavier fillets - in several continuous lines);
wait the time specified in the instructions until the glue dries a little;
place the part against the wall, press firmly with your palms, hold for several seconds or minutes (depending on the type of glue);
moving further along the perimeter, each time accurately measuring the length of the next part, gluing the baseboard throughout the room.

After installing the baguette, you need to let the glue dry completely, then putty the joints. The finished seams should be sanded with fine sandpaper, and the baguettes should be painted along the entire length.

Installation of wooden skirting boards

Typically, wooden baguettes are used to decorate interiors in classic, eco- and country styles. Such products look best with a wooden ceiling. They have a lot of advantages: environmental friendliness, attractiveness, resistance to mechanical damage. Typically, liquid nails are used to attach lightweight wood moldings, and the work in this case is carried out in the same way as described above. Heavier products are secured in a different way:

make careful markings of the walls;
prepare the first baguette - cut it for a good fit of the next one, measuring the angle in the miter box;
lubricate the wrong side liquid nails for convenience;
apply the baguette to the wall;
holding the product securely, attach it with self-tapping screws, driving the caps as deep as possible;
fill the entire perimeter of the room with baguettes;
seal the heads of the screws with wood putty, and after drying, clean it with sandpaper;
the joints are also puttied, treated with sandpaper, and varnished in the color of the baguette.

How to attach PVC skirting boards

Most often, such baguettes are used for finishing walls and ceilings. plastic panels in the kitchen, bathroom, veranda. Often they come complete with panels, have a special groove inside for fastening and are installed only when the panels are attached.

First, a frame is mounted under a plastic finish, the rail of which on the ceiling or wall will become the basis for the baguettes. The latter are attached with staples or self-tapping screws directly to the frame, measured in advance in size and sawed with a hacksaw.

To form joints and corners, special connectors are used, which are attached to glue for reliability. If the installation turned out to be inaccurate and there are gaps between the baseboards, they are coated with transparent or white silicone sealant.

Attaching a ceiling plinth to a suspended ceiling

In this case, the baguette will cover the junction of the wall and ceiling without attaching to the canvas. A small gap is left between the baseboard and the ceiling, or it is made larger for ease of installation of lighting. The easiest way is to glue baguettes made of PVC, polyurethane or polystyrene foam with a wide vertical side to the stretch ceiling. The only difference in the work will be that the glue is applied only to the vertical of the baguette, and the end in contact with the canvas remains clean. Otherwise, the technology is similar to that for attaching other types of baguettes.

The process of gluing ceiling plinths

Each method of installing skirting boards has certain nuances and features that the master needs to take into account.

Pasting the baseboard over the wallpaper

This method must be used if there is already wallpaper in the room, and only baguettes need to be replaced. The advantage is that they hide burrs and uneven edges of the wallpaper: all defects will be reliably sealed. The method also has a downside: if you need to change the wallpaper, you will have to tear it off and ceiling plinth.

The operating procedure is as follows:

trim the ends of the baguettes using a miter box;
miss reverse side baseboards with glue;
attach the product to the wall, adjusting it to the ceiling;
press, hold as long as indicated in the instructions;
remove excess glue with a damp cloth;
cover the top of the wallpaper with masking tape;
Seal the joints of the skirting boards with sealant, putty, and completely paint the products.

Securing the baseboard before wallpapering

The difference between this technique is that first the baguettes are glued to the ceiling, then all seams and gaps are sealed with putty and sealant, and only then do they move on to the final finishing of the walls with wallpaper. To ensure that the wallpaper line is perfectly even, they are glued with a margin, and then carefully cut off with a sharp knife strictly under the baguettes.

Installation of skirting boards in corner joints

Joining the baguettes at the corners is the most difficult stage of the work. The quality of cutting of products will depend on general view rooms, especially the ceiling. To cut skirting boards you will need a miter box, which you should practice with in advance on small unnecessary pieces. The plinth must be placed in the miter box as it will be located on the ceiling, the lower part should be pressed against the side of the instrument. Make a cut to create an angle of 45 degrees. This is true for a room with even right angles (90 degrees). If the angle is not straight, it is adjusted to the desired value using a sharp knife manually. Do not allow hangnails to appear or immediately carefully cut them off with a knife.

You need to glue the fillets in the corners like this:

Place the products together on the floor, check the accuracy of the joints;
cut off the interfering areas with a knife, if necessary;
Lubricate the baseboards with glue and apply them one by one to the wall surface;
press and wait for the required time until the glue dries.

Baguette installation technology

Depending on the type of skirting boards, there are a number of nuances that need to be taken into account during installation.

Lightweight foam models

If there are concerns that the plinth will not stay between the wall and the surface, and the base has defects, it is recommended to use polystyrene foam models. They are so easy to use that when gluing to wallpaper, the base does not require any preliminary preparation.

Instructions for using light skirting boards:

apply markings on the wall with a pencil, marking the bottom edge of the fillet;
take the parts, cut them according to the size of the walls;
to cut corners, use a miter box, a sharp knife, or a special file for polystyrene;
if you have no experience, you can draw the required angle on cardboard, and then apply it to the end of the product before cutting;
grease the back side of the baguette with glue, let it dry a little;
attach the part to the wallpaper, aligning it along the drawn line;
immediately remove excess glue that has come out with a rag;
press well, fix the fillet;
glue on all remaining parts.

Heavy polymer products

Sometimes relief moldings made of plaster or polyurethane are attached between the wall and the ceiling. It is not advisable to glue them to wallpaper, because the latter may not withstand such a heavy “burden”. Therefore, the order of work will be slightly different:

cut parts, including corner parts;
draw a line on the wall along which the lower edge of the plinth will run;
just above this line (1-1.5 mm), using a sharp knife, cut through the entire thickness of the wallpaper;
if the wallpaper is set to suspended ceiling, also make an incision 0.5 cm below its level;
pry off the cut strip of wallpaper with a spatula, remove it (if necessary, additionally sprinkle the wallpaper with water);
thoroughly clean the wall of paper residues and other contaminants and prime it;
glue the plinth in the standard way.

Wooden structures

Wood products are even heavier, so they need to be fastened much more securely. Fragments of skirting boards are cut with a hacksaw according to the size of the walls, in the corners - at 45 degrees. The ends are sanded with sandpaper so that the joints are neat. Next, make markings according to the width of the plinth along the entire perimeter of the room and drill the parts with self-tapping screws, recessing the caps deeply.

Additionally, you can use gluing with liquid nails so that the moldings are held on the wall and do not change position during drilling. Afterwards, the skirting boards are sanded, puttied, varnished or painted.

How to properly glue gypsum moldings to the ceiling

The procedure for working with such skirting boards will be similar to the previous options. The only difference is that the gypsum fillets are placed on a thick layer of gypsum-based finishing putty. The remaining mass is removed with a spatula. It is important to cut the corners and ends very evenly, avoiding the appearance of jags, they will greatly spoil the appearance of the finish.

Over time, any skirting boards, even the most expensive ones, can turn yellow. Therefore, it is recommended to paint them to give a more aesthetic appearance, and also to certainly hide all joints and defects. This way the baguettes will look beautiful and last longer, without requiring replacement during each repair.

Until relatively recently, the joints formed between the wall and the ceiling surface were covered with panels or this part was covered with a thin strip of embossed paper. Today, preference is given to ceiling moldings and baseboards, which hide existing distortions and gaps much better. As a result, the room acquires a unique appearance. Using the element, you can quite easily hide existing flaws that were not removed during repair work. As practice shows, gluing baguettes to the ceiling is not difficult if you follow the recommendations of experts and carry out all the work in stages.

How to glue baguettes to the ceiling and wallpaper

As practice shows, there are several ways to install a baguette on the ceiling surface:

directly to the wallpaper;
even before the finishing work of the premises begins.

The advantage of the first option is the fact that it is not necessary to adjust the length of the wallpaper to the line of the ceiling molding. With the help of such a decorative element, it is possible to visually hide all existing errors on the upper edge of the wallpaper.

In order to carry out installation work correctly, it is recommended to carry out everything step by step, adhering to the following algorithm:

Using a miter box, hacksaw or any other device, it is necessary to cut the edges of the baguette at the required angle.
On those surfaces to which the decorative element will subsequently adhere, it is necessary to apply a thin layer of adhesive.
After the layer of glue has been applied, you need to attach the product to the wall, lightly press it down and hold it in this position for several minutes. As practice shows, the manufacturer often gives recommendations for carrying out installation work using specific adhesives.
If there is excess glue, it should be removed using a rag or spatula. The joints of the baguette will need to be sealed with white sealant in the future.

After the baguette is glued, you can begin to apply the finishing coloring composition.

How to glue baguettes to the ceiling

Before starting installation work, it is recommended to first think about how to glue the baguette to the ceiling surface. In this case, an excellent option is to choose ready-made adhesive compositions. If you take into account the recommendations of experts, then there are several adhesive compositions, each of which is time-tested:

polymeric;
acrylic;
silicone based glue.

Comment! When choosing a polymer option, it is worth considering that the level of stickiness is quite weak. To glue a baguette made of foam plastic to the ceiling surface, you will need to hold it in one position for a long time, which is very difficult, especially when the product reaches a length of 2 m.

Using acrylic and silicone glue, you can quickly install a ceiling molding. On sale you can find tubes that are designed for a pistol. It is easy to apply the composition, and thanks to the presence of a dispensing spout, you can control the glue consumption.

The most budget option is a finishing putty or glue intended for drywall. Distinctive feature This composition has an affordable price and a quick hardening and setting process. Literally a couple of hours after the baguette has been glued, you can begin painting work.

Attention! The disadvantage of putty is the difficulty of applying a thin layer of the composition to the baguette using a spatula.

Preparatory work

As a rule, they begin gluing ceiling moldings after the walls have already been leveled, wallpaper has been hung, or the surface has been painted. If the walls are uneven, they must first be leveled using putty or plaster for this purpose. Particular care is taken in leveling the surface if you plan to install moldings made of plaster and wood. It is enough to press polystyrene foam products and they will hide the existing irregularities.

It is also recommended to prepare the ceiling surface in advance, namely the part to which the decorative element will be glued. If the surface is leveled and painted, no additional work is required. If necessary, the ceiling where the baguette will rest can be additionally coated with a layer of primer.

If you plan to mount the decorative element not end-to-end to the ceiling, but will have a small margin for mounting the LED strip, then for convenience it is recommended to mark the bottom sizing line. To do this, small nails are nailed around the perimeter of the entire room at a distance of 3 cm from the ceiling, after which the thread is pulled. Subsequently, this line is oriented.

How to cut baguettes for the ceiling correctly

Cutting a baguette is a rather complicated process. As a rule, the main problem is not that it is necessary to cut the material at an even angle of 90 or 45 degrees; you can use a miter box for these purposes, but that often the corners in the room are crooked and do not amount to 90 degrees. That is why, after all the work has been carried out, the cracks have to be sealed with putty.

If necessary, you can use special decorative inserts, which are used to decorate residential premises. In specialized stores it is possible to find decorative inserts for external and internal corners. Before installing such inserts, it is recommended to first trim the edges at an angle of 90 degrees.

Many craftsmen use a miter box when performing work. Before decorating the corners of the room, you need to attach the baguette to the surface of the ceiling and visually determine the cut line. The fillet is placed in a miter box so that the edge of the ceiling is at the bottom. The products are held by hand and at the same time the excess part is cut off. To design the right internal corner the cut is made from left to right; for the left, the procedure is done in reverse.

Advice! If a gap has been formed, it must be eliminated using putty.

How to glue foam ceiling moldings

As practice shows, glue ceiling moldings you can do it yourself without resorting to outside help. In this case, the main thing is to ensure that all elements are installed evenly and are firmly fixed.

The work process is as follows:

The final result depends on the correctness of the work performed.

Attention! Products made from foam plastic can be painted if necessary, and they bend well.

How to glue polyurethane baguettes to the ceiling

As a rule, it is recommended to start gluing the polyurethane baguette from the corner of the room, which is located next to the entrance. It is necessary to prepare wet wipes in advance, with which you can remove excess adhesive composition. Glue is applied to the edges and joints of the product. After the glue is applied, the baguette is applied to the surface and pressed tightly. The pressing time can be seen in the instructions supplied with the glue. If there is excess, remove the glue with napkins.

After this, decorative elements begin to be installed around the entire perimeter of the room. It is necessary to measure the length of each step and trim off the excess. The corners must coincide and they should be pressed as tightly as possible. To ensure that there are no marks or dents left on the material, it is pressed with the entire palm.

How to stick a wooden molding on the ceiling

The first thing you need to do is check the walls for unevenness - there shouldn’t be any.
If necessary, markings are made on the surface of the wall or ceiling.
After this, they proceed to preparing the first baguette - the corner must be cut.
If the baguette is narrow and light in weight, then it can be secured using liquid nails.
If the material is heavy, you will have to use self-tapping screws. You can first place the wood product on glue, and then securely fasten it with self-tapping screws.
When the perimeter of the room is completely processed, they proceed to eliminating existing gaps using putty.
At the end, all joints are coated with paint and varnish.

Often, decorative wooden elements are attached to special wooden corners.

How to properly glue gypsum moldings to the ceiling

Before installing gypsum products, measure the room and cut baguettes to the required length. It is important to ensure that the corners are cut straight.

After everything is prepared, it is necessary to apply a thick layer of finishing putty to one of the sides of the material, which will be adjacent to the wall. After this, the gypsum product is tightly applied to the surface of the wall and ceiling. If there is excess putty, remove it with a spatula.

Conclusion

Gluing baguettes to the ceiling is not as difficult as it might initially seem. All work can be done independently if you adhere to the recommendations and strictly follow a certain algorithm.

Many who have not encountered finishing works, it seems that all the talk about how to glue ceiling plinths is a simple waste of time, because this process is not particularly difficult. But once you encounter it, it turns out that the work requires increased attention. It is impossible to install fillets if their features are not taken into account, there is no clear plan of action, and the composition for fixation is not determined. If all this is not taken into account, the consequences will be very sad: fragments will begin to fall off, cracks will appear in the joints, incorrectly formed corners will ruin the entire appearance.

Installing a ceiling plinth with your own hands should begin with choosing a fillet. There are many types of products that have significant differences.

First of all, you need to know that baguettes vary in shape. So, it is customary to highlight:

Parts with grooves and clearly visible longitudinal recesses are an extruded version.
Elements with a well-convex, highly relief surface - injection type.
The variety that has a very smooth coating is referred to as the laminated type.

But the differences in the material of manufacture are much more pronounced. It is this feature that determines the final characteristics of the product and gives the best idea of how to properly glue the fillets into place.

This option is considered the most versatile and very practical. It has a lot of advantages:

Due to its high strength, the profile has a long service life.
Does not lose its external properties even if it is exposed to direct sunlight.
There is a variety that is flexible, which simplifies work on complex geometric structures.
It is not exposed to moisture, which makes it possible to use not only in bathrooms and shower rooms, but also in rooms that are constantly different high humidity: swimming pools, saunas, baths.
Has a wide range of colors and textures.

A polyurethane profile is the only option that can be used on highly curved structures

Gluing polyurethane baguettes to the ceiling is carried out using special adhesives that do not react with the material and have a good degree of fixation. Installing such a profile is quite simple; the work requires a minimal set of tools.

For all its advantages, this material has very noticeable disadvantages. They conclude that its cost significantly exceeds other options, especially when it comes to the flexible variety. It is also taken into account that the elements are quite heavy, which limits their use in conjunction with suspended ceilings.

Foam profile

Foam fillets are rightfully considered the most popular, because they are accessible to the majority of the population, while being endowed with excellent qualities and appearance. In addition, they have a number of other advantages:

They are light in weight, which allows them to be used for suspended ceilings, as well as to perform work without the use of additional forces.
They are easy to process, which reduces the time required for installation.
If necessary, the surface can be painted many times, and this creates endless possibilities for design solutions.

Also, we must not forget that this type of fillet has negative qualities, which are due to the fact that the products are extremely fragile and are easily damaged.

In addition, this option has the most restrictions on the use of fixing compounds. When deciding how to glue foam plinth to the ceiling, take into account that the adhesive solutions used should not contain any solvents. The fact is that their presence is a direct path to complete deformation of parts that literally dissolve from the influence of this substance.

PVC profile

This type of fillet is a product that is made of polyvinyl chloride. To put it simply, it's just plastic. PVC profiles are most often used in the case of wall cladding with plastic panels. But this is not a necessary condition.

PVC fillets have the following advantages:

Quite cheap, although this parameter is much higher than that of foam products.
They have an abundance of colors and imitations. If necessary, you can select parts that will replicate the natural cut of wood or stone.
Insensitive to moisture. According to this indicator, they are superior to polyurethane.

For gluing, universal adhesives are used, which are marked as suitable for PVC. Although plastic has impressive qualities, it cannot be painted, which is important to consider.

Wood profile

The widespread use of wooden fillets is on the decline. This is facilitated by:

Expensiveness of the material. We are not talking about rare breeds here, high cost They even have widespread species. Of course, in specialized construction stores you can also find inexpensive wooden frames, but they are of very low quality.
Not the easiest processing procedure. To ensure a perfect fit, the parts must fit flat surface, and pruning is done very carefully. The resulting defects are very difficult to hide under a layer of putty.
Installation involves a series of labor-intensive procedures. Before gluing the ceiling plinth, you should decide whether this will happen using putty or glue. The first option is often preferable. Next, additional fixing measures are taken - using self-tapping screws, dowels or nails; the choice of fasteners depends on the base.

Of course, a wooden fillet is a real luxury. It is she who is able to give the room a certain aristocratic look. It is important to consider that walls covered with clapboard and wood panels cannot look good without such an element. Attempts to replace the profile with a modern version will lead to the interior losing its appearance.

Note! Gypsum varieties are also becoming less popular. They have an unsurpassed appearance. But this feature began to be copied by many synthetic products. In addition, gluing stucco molding is only possible on a plaster solution.

Gluing taking into account the width of the product

It is impossible to talk about how to properly glue a ceiling plinth with your own hands if you do not take into account its width. This indicator directly affects the sticker technology and the overall appearance of the room. The following features are taken into account:

Wide parts are perfect for rooms with high ceilings, because they visually reduce their height. To get reliable fixation, the composition is applied along the entire seamy side, this will prevent the glued elements from starting to fall off.
Small-width fillets are an excellent solution when ceilings need to be visually raised. Fastening is carried out pointwise if lightweight products are used.
Medium-width fragments are considered the most acceptable; they are used everywhere. Ceiling plinths of this size can be glued using all known methods.

Note! The appearance of the product is of great importance during installation. Thus, fully processed, painted, textured elements require very careful application of adhesives. The fact is that getting them on the front side can lead to the fillet being irrevocably damaged.

Sticking according to design

Particular attention should be paid to the external features of the fillet. Thus, the color of the elements can visually change the perception of the room. For example, if the shades decorative details and the walls coincide, the room will seem much smaller.

But then how to properly glue the ceiling plinth, taking into account the shape of the product? There are a number of simple recommendations for this:

The pattern should be selected taking into account what style will dominate the interior. Thus, classic variations suggest that baguettes will have a complex texture, patterns that resemble stucco. Modern minimalism strives for simplicity, so thin fillets are suitable for it, the ornament on which is absent or has a clear geometry.
with volumetric figures it is better to use for plain surfaces. This option significantly complicates the atmosphere, so it is absolutely not suitable for small rooms.
To achieve harmony, the pattern must be combined with the walls or ceiling. This will make the transition as smooth as possible.

You can create the most harmonious interior by combining the fillet pattern with the walls or ceiling

Note! When working with baguettes that have a complex shape and texture, take into account that these parts are very difficult to adjust to the corners. Therefore, it is better to purchase special corner pads for them.

Basic installation methods

There are various ways, which are used when gluing ceiling plinths. It is customary to distinguish two main technologies that allow the installation of the most popular product options: polyurethane and foam.

Method one - using putty

This option is great for situations in which wallpapering has not yet been done. Many masters rightly consider this method the most acceptable. The fact is that an untreated surface allows you to achieve the best grip.

Preparation

To work you will need the following set of materials:

Directly fillet. It is very convenient that this method is universal and practical for all varieties.
Putty. The process uses the most common mixture, which is sold everywhere in stores; you can use leftovers from previous repairs. It is important to pay attention to the expiration date and integrity of the substance. If the material is not friable, it is rejected.
Note! A gypsum composition can be selected for the job. But it has one big disadvantage - quick setting. This limits the time the solution can be used, and also does not make it possible to correct any defects that have arisen.
Priming. Used to increase surface adhesion. It is better to choose formulations with deep penetration.

For gluing the ceiling plinth, select necessary set tools:

Trimming of parts is carried out using an ordinary hacksaw for metal. You need to use a stationery knife only when the width of the elements does not exceed two centimeters, otherwise the quality will not be as intended.
To form an angle, they resort to the services of a primitive, but very effective device - a miter box.
A medium-width spatula of 8-10 cm is suitable for applying putty.
It often happens that the surface of the fillets has a very noticeable roughness, which interferes with high-quality work. It is removed using sandpaper.

Before attaching the plinth, check the availability of all materials and tools. Work is much more efficient when there is no need to search necessary devices in the process of its implementation.

Fixation

The fillets are glued according to a specific pattern, which consists of several stages. It should be borne in mind that when performing work, all actions are adapted to the specific situation.

Stage one:

It all starts with inspecting the area where the molding will be installed. Happens often, especially after doing finishing that small defects and irregularities remain on the surface. To remove them, sandpaper is used, which is attached to a special block. Of course, it is better to do such preparatory work in advance.
The walls and ceiling are treated with a primer. It is important to consider that even this composition needs preparation. The simplest option is to simply stir, but if a concentrate is used, it must be properly diluted. Further procedures can be carried out only after the surface has completely dried.
Marking is required. The simplest way is to apply the part to the desired location. A line is drawn exactly along the edge that will serve as a guide.

Marking the wall surface

Many craftsmen advise measuring the length of fillets in advance. That is, measurements of all areas are taken, and fragments are calculated. It is much more convenient to draw up a diagram on a piece of paper. You can skip this step, then the marking will have to be done for each individual element when direct fixation is performed.
Parts are being trimmed. It is this process that can cause many problems. You need to be especially careful when working with polystyrene foam, which easily crumbles from improper exposure. To form corners, use a miter box. It’s better to practice a little to determine the correct placement of the products in this tool.

Cutting skirting boards at an angle

Stage two:

Installation of the ceiling plinth begins with the preparation of the putty mixture. It should be noted that it is kneaded immediately before work to prevent loss of properties. ready solution. This process It’s quite simple: a dry substance is poured into a container, which is diluted with the required amount of water. The mixture should be thick and well mixed.

Advice! It is important to avoid the appearance of lumps or dry residue in the mixture. Therefore, it is recommended to first add water, and then add putty. Each manufacturer places instructions on the label that must be strictly followed.

Now comes the most crucial moment - fixation. To do this, use a spatula to collect a small amount of the prepared solution. It is evenly distributed over the entire surface of the baguette, which will directly interact with the ceiling and walls. This procedure is not complicated, but care must be taken to ensure that excess does not fall on the front part.

Installation starts from one of the corners. It is believed that it is better to choose an area for this that is in the field of constant visibility. But before gluing the ceiling plinth, check that the applied mixture is not too much. Otherwise, there will be too many leftovers that will be difficult to deal with.
The part is pressed to a specified location. It is at this moment that those lines that were previously drawn will come in handy. They are used to verify the correct installation. There is no need to press too hard; fresh solution allows you to fix the element very quickly. In any case, excess mixture will appear from under the edges. Until the solution hardens, it is removed.

Advice! Removing excess is not always advisable. It often happens that there are minor unevenness on the surface, in which case the putty fills them perfectly. Thus, fillet edges are formed that do not have any defects.

When attaching the second fragment, a logical question arises: how to join the ceiling plinth correctly? Many people make a typical mistake - they forget to apply the solution directly to the end part. The mixture requires a small amount so that the excess is completely absent or minimal. The product is pressed into place and combined with the first element. It is important to achieve a perfect match, because any distortions will be obvious.

Each glued part must be installed clearly along the line. It takes time for the material to adhere well and dry completely. This takes about a day. Further work consist in the fact that possible flaws caused by mixture residues are cleaned out. If necessary, the fillets are primed and painted. To avoid painting adjacent surfaces, apply masking tape along the edges of the ceiling plinth.

Note! When work is carried out with fillets that are highly fragile, pressing is carried out with the back of the hand, without a point stop. This will help avoid dents.

Method two - using glue

This option is usually used when you need to glue the ceiling plinth onto the wallpaper. Although this does not mean that it cannot be used on bare walls. An important condition in this case, the wallpaper must be glued very securely, because you can diligently and carefully install the fillets, but due to defects in the main coating, they will begin to lag behind the wall.

Installation of ceiling plinth using glue can be done over the finishing finishing: painting or wallpapering

Glue selection

Before gluing the skirting boards, you need to decide on the choice of adhesive composition. Currently, there are many options that are suitable for this task. So, among all the diversity, the following stand out:

Universal substances. This category includes solutions that have a very viscous and transparent mass that hardens for a very long time. The most popular options are called “Titanium”. These products are recommended for working with polystyrene and its varieties, and are suitable for any foamed materials. But they are quite inconvenient to use: they take a long time to apply to the surface, and the fixation is not always of high quality; you have to hold the parts for several minutes.
Liquid nails. These are very convenient compositions, to which many masters give the unconditional palm. Available in tubes for a construction gun. But when choosing this option, it is necessary to take into account that the composition must have an inscription confirming that it can be used with polystyrene foam products.
Acrylic sealant. Enough original solution, which helps to find a way out of the situation when it is not possible to purchase one of the above materials. But in this case it is very important to choose proven formulations.

Fixation

Now you need to figure out how to properly glue the ceiling plinth with glue. The instructions are:

The surface is being prepared. It is necessary to carefully inspect it for any irregularities or defects. If there are any, they are completely eliminated. This is required to ensure that the planks are pressed tightly and that strong bending does not occur.
Markings are being made and parts are being prepared. It is better not to neglect this procedure; it allows you to perform work with better quality.
Next, begin applying the adhesive. It is most convenient to distribute it in the center of areas adjacent to the surface.

The parts are applied to a given area and pressed. It is important to follow the instructions that come with each glue. So, different types of compositions require different approach: holding, tearing and re-sticking. It is better to strictly adhere to the specified scheme.
Advice! It is these parameters that you should pay attention to before purchasing. They help you understand how to glue the ceiling plinth as quickly as possible.
The remaining elements are stacked. After which the fillets are left until completely fixed. This time determined by the composition used. If there are cracks, they are sealed with sealant. Joints that are not always able to fit tightly are also sealed.

Repairing cracks with sealant

When you have to correct a large number of defects, it is better to carry out subsequent staining. It will help hide conspicuous flaws.

Indeed, glue helps to significantly reduce the time required for work, but it is important to take into account the features of each composition.

Currently, many popular solutions have similar names, but differ in manufacturer. Therefore, the manufacturer is the main indicator of quality.

Correct formation of corner and intermediate joints

It is this procedure that causes the most problems: it only takes a small mistake to irrevocably damage the workpiece. Therefore, it is impossible to talk about how to properly glue skirting boards to the ceiling if there are no concepts about the formation of joints.

So, there are a number of tips that will help in this situation:

For such work, a miter box is used, which has a set of stencils at different angles. To create a 90-degree angle, you need to trim two parts at 45-degree angles.
The internal corner is obtained if the fillet is placed pressed against the bottom and side of the miter box. In this case, the surface of the part that will be adjacent to the ceiling should be located on the bottom of the tool.
To obtain the left angle vector, the element is located on the same side, and the knife must enter the stencil from right to left. If you need to get the right vector, then everything is done in reverse.
But how to glue plinth to the ceiling when you need to get external corner? In such a situation, the cut must be directed differently. That is, to obtain the right vector, you need to position the knife from right to left.

If you don’t have a miter box on hand, you can resort to creating a stencil with your own hands. To do this, the baguette is placed on a table on which two lines are marked corresponding to its width. So, for example, with a fillet width of 80 mm, both lines will be located exactly at this distance. A square is drawn between them, which should have all sides of 80 mm. It contains diagonals. They will form an angle of 45 degrees. Now all that remains is to place the part on the desired side and cut it. This option is bad because the fragments are difficult to fix; any shift can lead to an uneven angle.

Attaching the ceiling plinth is also complicated by intermediate joints. There are several recommendations:

Baguettes made of plaster and foam are best laid at right angles, especially when using putty. It should be noted that a thin layer of solution is applied to the joint of the second (next) element.
Trouble can arise if the edges are damaged. Then it is necessary to cut the part so that it is possible to form a complete pattern in two fragments.
Polyurethane products need more attention; their joints work better when they are made at an angle. The bias stitch will be less noticeable.

Indeed, cutting corners is not the easiest task and requires concentration and care. To better understand the whole process, we suggest watching the video below.

Features of gluing to different ceiling surfaces

Difficulties also arise when there is no proper understanding of how to glue baguettes onto a ceiling made of different materials. It is a mistake to assume that different surfaces require exactly the same approach.

Stretch ceilings

This option is very popular. This is easy to explain, because it can be done very quickly and without special effort obtain a flat surface that can have different design. It is important to take into account one feature when you need to select a fillet for such a coating: the side of the part that will face the ceiling remains without adhesive. That is, the fixation is carried out directly on the wall. Therefore, products must have the following qualities:

Light weight. In this case, polystyrene foam, polystyrene foam, plastic and some types of polyurethane are suitable. At the same time, we glue the ceiling plinth with compounds that have quick and reliable fixation.
The side that faces the ceiling should be less than that which is adjacent to the wall.
To install wooden baguettes, you will need additional support points. These could be: dowels, hidden anchors.

Designers advise choosing PVC products; they harmonize best with tension structures.

Ceilings from gypsum plasterboard

How to glue skirting boards to plasterboard surfaces? This is a fairly simple procedure, because the base turns out almost perfect. A little attention should be paid to the joints of gypsum plaster boards, as they may contain putty residues. Any irregularities can be easily removed with sandpaper.

Note! Any fillets are suitable for such surfaces. But it should be borne in mind that the use of plasterboard leads to a reduction in the size of the room, especially when mounted on a frame. That's why the designers came up with great solution– place the wider side of the baguettes on the ceiling, which visually enlarges the room.

Plastered ceilings

Such surfaces have their drawbacks. Therefore, before installing the ceiling plinth on a plastered ceiling or wall, check their evenness. If the defects are small, then there is no need to eliminate them. For this case, you can use fillets with soft edges that will not create very noticeable irregularities.

Summarizing the above, it becomes extremely clear that the work of installing baguettes requires proper treatment. All the talk about how to quickly glue skirting boards to the ceiling, but maintain quality, makes no sense, since this is a guarantee that the desired effect will not be achieved.

Baguettes visually look like baseboards and are used to decorate the junctions of walls and ceilings. They can have different shapes, colors, finishes and are glued end-to-end or on wallpaper. They can be easily painted with water-based paint depending on the design objectives. Options for creating a variety of style solutions a lot, you just need to choose the right baguette, as well as choose good glue and carefully fix the products on the ceiling and wall.

How to properly glue baguettes to the ceiling

Work begins with leveling the surface. Walls and ceilings with defects are carefully puttied, after which a primer is applied.

Start gluing the baguette from the corner. The end of the baguette is cut at an angle of 45 degrees to create an even, neat joint.

The glue is applied in an even layer along the entire length, as well as on the cut corners. Next, the product is applied to the surface and pressed tightly.

How to glue baguettes to the ceiling?

The cut corners should line up exactly to form a corner. The joints are also carefully taped.

Question: glue baguettes in the corners

The craftsmen answer - when connecting parts of the plinth end-to-end, you must add glue and carefully press it against the wall to squeeze out the remaining adhesive. It is better to press down with the edge of your palm so that there are no indentations from your fingers. Remains of glue are removed with a damp cloth.

How to properly glue baguettes onto putty

How to glue baguettes onto putty

The option of gluing baguette onto putty is often used, especially by professionals. Work begins with careful preparation of the ceiling and walls, which are leveled with putty. Next, use a miter box to trim the ends.

The baguette is attached with glue, for example, it can be Cosmofen plastic glue, or the same putty, all the cracks between the wall, ceiling and baguettes are rubbed with it. Excess material is removed with a clean cloth. The work must be completed before the putty is completely dry.

The next stage is priming the surface and painting it in the desired color. It is worth remembering that painting the same color as the ceiling will help create a visually unified structure.

After this, you can start gluing the wallpaper; the remnants of the overlap of the upper part of the wallpaper onto the baguette are pressed with a spatula and cut off with a stationery knife.

Advantage this method The fact is that you can safely paint without fear of damaging the wallpaper.

How to glue baguettes to wallpaper

Gluing baguettes to wallpaper

This method is used when wallpaper has already been pasted and baguettes need to be fixed on top. In this case, the operating procedure is as follows:

first you need to trim the ends with a miter box,
then apply a thin layer of glue to the surface of the wall and ceiling,
attach the baguette to the wall,
press it down and hold it for the time specified in the instructions,
remove excess glue with a napkin,
seal the joints with sealant,
the surface is painted with acrylic or water-based paint.

It is very important to be careful when painting. so as not to touch the wallpaper, and even better, paint the baguette before starting its installation.

For those who are interested in how to glue baguette to wallpaper. It is worth knowing that using this method, you will not have to adjust the wallpaper, and if there were distortions or burrs, they will be hidden under the baguette.

Glue for baguettes

Modern baguettes are most often made not from plaster, which is difficult to glue, but from foam plastic. It is lightweight, simply cut, transported and glued. Craftsmen use acrylic, putty, and special adhesives for polystyrene.

The most common choice of glue for baguettes is liquid nails. They adhere perfectly to concrete, set quickly and over time the baguette does not move away from the ceiling. Available in cans. It is applied using a special mounting gun, which allows you to carefully apply glue in awkward places with minimal excess.

Acrylic adhesive is water-soluble, it attaches well not only to foam plastic, but also to parquet, cork, parquet board, drywall.

If there is putty left after finishing the walls, you can use it. The best choice is a fine-grained finishing putty, which can be easily removed with a damp cloth, leaving a smooth seam.

Transparent polyurethane adhesives, available in tubes, are also used. They glue baguettes very reliably, but you need to work quickly and carefully.

If the choice was made in favor silicone sealants, it is worth knowing that after drying it will not be possible to paint them with water-based paints.

If you are in doubt about what to choose, you can ask for help from a sales assistant at a building materials store. He will select the composition based on the material of the baguette and your goals and objectives. Much will depend on the quality of the glue, but you also need to work with it correctly, so do not forget to study the instructions before starting work.

1.Materials and tools

2. Gluing baguettes

The ceiling molding serves not only to hide the gaps between the ceiling and walls, it is also a decorative element that can give the renovation a finished look. You can see what the surface of a ceiling with a ceiling plinth looks like in the photo. Many people don’t even think about how to glue baguettes to the ceiling.

How to glue a ceiling molding with your own hands

It seems to them such an easy task that they do not think about any of the nuances involved in this work. But in order for the result to please you for a long time, you should follow some rules.

Materials and tools

Before moving on to how to glue baguettes to the ceiling, you need to prepare following materials and tools:

hacksaw for metal;
pencil;
sponge;
miter box;
soap solution;
sandpaper;
level;
brush;
glue or liquid nails.

As for how to glue baguettes to the ceiling, this can be done with either glue or liquid nails.

How to glue baguettes to the ceiling, see details in the video:

Pasting baguettes

How to glue baguettes to the ceiling - secrets and subtleties

Very often, many of those who decide to carry out home renovations with their own hands do not even realize that in the process of gluing baguettes there are important rules and requirements that must be followed. However, you should not think that only professionals can handle this work. We will try to tell you about all the most important points so that you can handle it on your own.

A baguette or ceiling plinth is not only an accessory that hides unevenness and gaps formed at the junction of the wall and ceiling. It is also a decorative element that gives a complete look to your room.

Baguette for wallpaper: how to glue correctly

The plinth can be made in different colors and forms, have different textures and finishes. They are easily painted with water-based emulsion, it all depends on the tasks at hand. There are a huge number of style solutions that you can bring to life with the help of baguettes. All you need is to choose a ceiling plinth that suits your style, good glue and carefully glue this decorative element.

Types of baguettes

Types of ceiling baguettes

All these products can be divided into two types:

The difference between them is as follows: the wall one is glued to one plane, it is installed on both walls and ceilings, it can also be used to decorate external corners, make a frame for panels, etc.; and the ceiling one is glued on two planes; it is often used only when finishing the junction of the wall and the ceiling.

Advice: if you decide to glue the baseboard yourself, you should not choose products with intricate patterns. They are difficult to join and putty. Believe me, a simple baguette, carefully glued, will look much better. We also recommend choosing a ceiling plinth at least 5 cm wide. Its installation will be much easier.

Gluing process

What you need to stock up on before work:

liquid nails or glue;
brush;
construction knife;
pencil;
miter box;
clean rag or sponge;
finishing putty;
spatula.

The process of gluing the ceiling baguette

So, how to glue baguettes to the ceiling? Professionals advise the following course of action:

The whole process should start with leveling the surface. If the ceiling and walls have uneven surfaces, they need to be puttied. After this, apply primer.
Gluing baguettes starts from the corner. The end of the ceiling plinth must be cut at an angle of 45 degrees. This way you will get a smooth and neat joint.
Apply glue along the entire length of the product in an even layer. Don't forget to apply glue to the cut corners.
Place the product on the surface to be glued and press firmly. If you made the cuts correctly, the corners will clearly coincide and form an angle.
The installation is complete, and once the glue has dried, you can start painting.

Many people have difficulties in designing corners, so here we would like to go into more detail. Experts say that when joining two parts of a ceiling plinth end-to-end, it is necessary to carefully work the edges with glue and press the parts tightly to squeeze out any remaining glue, which should be removed with a napkin. Press down not with your fingers, but with the edge of your palm, so you will not leave indentations from your fingers.

Sticking baguettes onto putty

Gluing baguettes onto putty

Specialists have to perform work such as installing baseboards on putty. Work should begin by leveling the surface of the walls and ceiling. Then the ends are trimmed using a miter box.

The baguette is placed on glue and putty, and all unwanted cracks are closed with putty. If excess material appears, it must be removed with a napkin or clean rag. Naturally, the work must be completed before the putty dries.

After the baguette is glued, you can start gluing the wallpaper. If there is an overlap of wallpaper on the ceiling plinth, then the wallpaper is pressed against the joint with the baguette with a spatula and carefully trimmed using a stationery knife. The advantage of gluing the wallpaper after installing the baguettes is that you can safely paint the ceiling plinth without fear of staining the wallpaper.

How to glue baguettes over wallpaper

Ceiling baguette on top of wallpaper

Specialists also have to deal with this method when the wallpaper is already pasted and there is no need to change it. In this case, the work plan looks like this:

Trim the ends using a miter box.
Apply a thin layer of glue to the ceiling and walls.
We attach the ceiling plinth to the wall.
We press it down and hold it for the time specified in the instructions for the glue.
We remove excess glue with a napkin and seal the joints with sealant.
We carefully paint the baguette; in some cases, the baguette is painted before starting work, so as not to stain the wallpaper.

Those who decide to use this method should know that in this case you will not need to adjust the wallpaper to fit the baguette.

In addition, if distortions occur during wallpapering, they will be hidden by the baseboard.

We hope that we were able to answer most of the questions related to ceiling cornice, and its installation will be easy and relaxed for you!

How to glue ceiling plinth

Most pleasant stage repair work - wallpapering the walls and installing ceiling plinths, as the room is already becoming cozy and the cherished moment of completing the renovation is approaching. In order for the molding to fully fulfill its practical (disguising defects in the ceiling-wall joint) and decorative (giving the room sophistication and special charm) functions, it must be properly glued.

Methods for attaching skirting boards

Before gluing the ceiling plinth, you need to decide on the method:

Installation over wallpaper. The advantage is the ability to select molding when you can already see the complete picture of the room, without fear of making a mistake with the design.
Installation on walls only prepared for wallpapering. The advantage is that there is no chance of spoiling the final finish during the process of attaching the curbs.

Attaching the ceiling plinth

Preparation for installation work

You can glue the ceiling plinth only after it has been left unpacked for a day. Therefore, after purchasing a baguette, you have at least a day to fully prepare for the installation process.

First of all, you need to purchase all the materials and tools that you may need:

Glue or putty, depending on the chosen installation method.
A miter box, a fine-tooth saw and a construction knife will help you carefully make a cut at the junction of two baguettes with the desired outer or inner corner.
Spatula, rags and sponges to remove excess glue and putty.
Paint and brushes for painting the border.

Tools for installing ceiling plinths

If you have little or no experience in gluing ceiling plinths, you need to practice filing corners. Therefore, it is better to purchase an additional baguette and use it to make all kinds of corners that are available in the room.

Ceiling plinths should always be glued to a dry and clean surface, so the place of attachment should be wiped with a cloth to remove dust. If the baguette is attached to a plastic surface, it must be degreased and wiped dry.

Choosing glue for attaching the baguette

Adhesive for ceiling plinths

If you are going to glue the ceiling plinth before finishing, it is better to use finishing putty or plasterboard gluing solution.

If installation will be done on top of wallpaper, special glue is required. Here the choice becomes between 2 types: acrylic and polymer. Water-based adhesive (acrylic) is used in children's rooms, bedrooms, living rooms and other rooms where safety and the absence of a pronounced odor are important. Polymer adhesives, such as Moment and Titan, are recommended for use in rooms with high humidity.

Installation of skirting boards before finishing

The process of installing the molding must begin by sawing down the edges at the desired angle. To avoid confusion, prepared baguettes can be laid out near the perimeter walls in those places where they will be attached to the ceiling. The joints of the plinth on a straight wall are adjusted in place so that there are no large gaps. Therefore, there is no need to immediately cut them to size.
To make the corners perfect, it is better to adjust them without adhesive. We take two baguettes, sawed at the desired degree and join them in the corner. If the gap is large, we adjust the joint by cutting off the excess with a knife. If the quality of the joint is satisfactory, take a pencil and outline where the molding fits against the wall and ceiling.
After everything corner connections prepared, you need to dilute the mixture. There are 2 possible ways to prepare it:

Mix the finishing putty with water until a homogeneous soft mass is formed, the excess of which will be squeezed out from under the baseboard. It is important that the mixture is like thick sour cream, but does not flow;
Add putty and PVA glue to the water (proportion 1:1:1) and mix until a homogeneous mass is formed and leave for 2-3 minutes. The adhesive mixture is ready, you can start working.

We glue the ceiling plinth starting from the corners. To do this, apply the putty evenly on both working surfaces and install the baguette along the previously drawn lines, pressing it along its entire length. Remove excess putty with a spatula, immediately rubbing the joints and wiping them with a damp cloth. The only case when it is necessary to apply glue or finishing putty to one surface is a suspended ceiling (nothing can be glued to it).

In the same way, we will glue the baguette on the other side of the corner and putty the junctions with the walls and other molding.

When all the corners are ready, we proceed to the straight sections. We measure the required size by placing the plinth between two already glued ones, cut it off and fasten it in a well-known way.

After the putty has dried, prime the molding and paint it.

Installation of skirting boards on wallpaper

The algorithm for attaching a baguette to wallpaper is the same as in the previous case. But there are some nuances:

Glue is also applied to both surfaces of the baguette, but not evenly, but pointwise in increments of 3–4 cm or in a narrow strip. The amount of glue should be such that it holds the glued product well, but does not protrude when pressure is applied to the molding. If it does appear on the wallpaper, you need to immediately wipe it off with a dry sponge or cloth.
After applying the glue to the baseboard, you need to wait a little time (so that it sets) and then stick it on the walls. If this is not done, you will have to stand for a long time, pressing the molding against the wall and ceiling, which is very inconvenient.
It is more convenient to paint the baseboard before installing it, this eliminates the risk of paint getting on the wallpaper.
How to glue baguettes to the ceiling

If the walls are uneven

Often you have to stick a baguette on uneven walls with wallpaper, which is why they appear large gaps and gaps. At the same time, wallpaper does not allow you to putty the joints and improve the appearance. To correct the situation, you need to take a sealant that matches the color of the molding (usually white) and carefully mask the joints. This should be done after the glue has completely dried.

Nothing makes the transition from the wall to the ceiling of a building more aesthetic than an exquisite frame made of aesthetic and practical plastic. The question of how to glue a plastic baguette is relevant and, if necessary, to hide small imperfections after repairs. The presence of such an interior detail opens up additional opportunities for improving the appearance of the room.

A plastic baguette is more practical than a wooden one. This material is easier to clean and retains its presentable appearance longer without additional care. Plastic edging is much lighter in weight, so installing its structure is technically simpler. In addition, the price of plastic as a baguette material is significantly lower. This is especially important if ceiling frames are purchased for finishing office or public premises, and it is desirable to save on materials.

Stages and features of gluing plastic baguettes

The traditional technology of gluing a baguette frame for the ceiling includes several steps. This:

Preparing the surface for gluing.
Carrying out the necessary calculations.
Cut the required length of the baguette blank.
Direct installation.

The technical nuances of baguette gluing may vary depending on the type of surface. If baguette frame glued to wallpaper, it is necessary to apply a smaller amount of adhesive to avoid stains and softening of the wallpaper. When gluing under a suspended ceiling, it is best to attach the interior frame to the wall so as not to damage the delicate surface of the ceiling. Most practical option baguette for most of these structures - ceiling plinth.

In order for the baguette edging to hold securely and look impeccable, installation must be performed correctly at all stages of work.

Surface preparation

The first step of gluing baguette edging is preparation work surface. Before gluing the decorative panel, the surface must be thoroughly cleaned of dust and remnants of the old coating (paint, wallpaper, whitewash) and any gaps must be smoothed out using primer. In many cases, additional putty is required.

Main task preparatory stage- increasing the load-bearing capacity of the surface on which the baguette panel will rest. Applying a layer of primer will greatly improve the adhesion rate, or adhesion. If you properly prepare the wall before gluing plastic baguettes, this will greatly save the consumption of adhesive while ensuring excellent fixation of the frame.

Calculations and markings

If each corner of the workroom is exactly 900, standard cutting using a miter box is sufficient.

How to stick baguettes to the ceiling yourself (video)

The marking work becomes more complicated if the task of the baguette panel is to hide the imperfections of the room at the junction of the ceiling and walls. To calculate the required amount of material and mark in a room with non-standard corners, you need to place a piece of baguette in the corner between the ceiling and the wall, and then draw lines along the bottom and top of the piece.

The main value that you should focus on in this case is the intersection of solid lines on different sides of the angle. These places are indicated by marks on the baguette opposite straight lines. Accuracy and aesthetics of making joints - important indicators gluing quality.

Cutting part of a baguette

To separate the desired portion of the material for decorative panel, you can use a hacksaw for plastic or a knife with special blades.

After the necessary pieces are cut, you must check the accuracy of the angle by folding the two parts along the previously drawn marks (internal and external corners). The slightest inaccuracy should be “smoothed out” with sandpaper or a knife, otherwise a gap may form. Also suitable for this purpose electric jigsaw, especially when working with “curly”, volumetric panels.

It is also possible to trim the baguette blanks during fastening, but this is much more difficult and more time-consuming and effort-consuming. Therefore, it is better to glue pieces that fit perfectly together, rather than making corrections during installation.

Installation nuances

It is best to start gluing the baguette edging from the corners of the room - this is the basic and most painstaking work. Straight parts of the required size are much easier to glue. When applying glue to the edges of the workpieces, you must ensure that any excess sticks out. The more uniform the layer of adhesive applied, the better the plastic will “grab.” The excess that appears is evenly distributed along the edges with a brush, and the residue is washed off with heated water and soap or solvent.

When the panels are already glued, you need to pay attention to processing the connections. They are lightly puttied and sanded with sandpaper. After sanding and drying the glue, if necessary, you can paint the mounted baguette.

Choosing glue for a baguette panel

How to glue a plastic baguette selected from the rich collection of the ART-BAGET online store? Many experts recommend using “liquid nails” for this purpose - a special construction adhesive that is designed for any weight of parts. “Liquid nails” are made on a neoprene or water base. This adhesive is universally compatible with different surfaces. It is preferable to apply it with a pistol.

Other options are glue “Dragon”, “Moment”, Bostik Vinycol 1520, “Khimkontakt-Desmokol” based on organic resin, specially designed for soft plastic “Secunda Vinyl”. Regardless of which glue you choose, you need to avoid getting it on the outer surface of the baguette.

Easy gluing and excellent results!

Which photo frame is better to buy →

Finishing ceiling surface It almost always ends with the installation of a decorative plinth, which gives the room a finished and harmonious look. However, this part of the work requires adherence to a certain sequence and technology, especially regarding the design of corners. In this article we will look at how to glue baguettes to ceilings to ensure a high-quality repair.

Features of using baguettes

In addition to the fact that ceiling moldings allow you to harmoniously design the transition from the wall to the ceiling surface, they also have a number of advantages, including:

budget price;
wide range of sizes, shapes, configurations;
the ability to use decorative plinths with any type of ceiling finish;
flexibility allows you to bypass unevenness on the walls and hide them;
ease of installation.

Depending on the material from which they are made, you can choose the following types of products:

foam and polyurethane;
plastic;
aluminum;
plaster
wooden.

Ceiling plinths can be smooth or embossed, narrow and wide.

Before you start gluing the ceiling molding, you need to decide what the products will be installed on. Most often, compositions are used for polystyrene foam materials. But you can find other alternatives on sale:

putty is often used to glue two surfaces together. The main advantage is that it not only securely fixes the plinth, but also allows you to immediately seal visible seams and transitions;
liquid nails efficiently secure the plinth under the ceiling, ensuring instant adhesion of the two surfaces;
acrylic glue is used for installation wooden skirting boards and a foam baguette;
Silicone sealants are also used to attach baguettes, but they have a significant drawback - after installation, the exposed areas of silicone cannot be painted.

To make sure that you have chosen the correct composition, read the information on the instructions for the glue. Manufacturers usually indicate the type of material to which a certain type of adhesive is suitable.

To correctly install the plinth, you need to make markings on the wall surface. You can skip this step if all angles in your room are strictly 90°. For a large room, it is better to start from the corners. Prepare a solution of water and soap, a small sponge and a spatula in advance.

The algorithm of actions will be as follows:

Apply a small amount of glue to the edge of the plinth using a spatula, carefully coat the joints of the elements;
work carefully so that the glue does not get on the front side of the plinth;
place the baguette on the surface, press it tightly;
Immediately remove any exposed glue with a sponge soaked in soapy water;
After you have covered the entire perimeter of the ceiling with plinth, seal the seams between the individual parts with putty.

We are talking about when the walls have already been decorated with wallpaper, and on top of them you need to apply a baguette to the ceilings. In this case the order will be as follows:

the ends of the plinth are trimmed using a miter box;
the reverse side of the plank is coated with glue;
apply the product to the wall and, pressing lightly, hold it for as long as indicated on the packaging for the glue;
excess glue is removed with a sponge;
the joints are sealed with silicone-based sealant;
if necessary, the baseboard is painted.

With this method, care must be taken not to damage the wallpaper. If you plan to paint the baguette, it is better to do this before installing it.

In this case, the peculiarity of the work is that they first glue the baguettes to the ceiling, use a putty mixture to seal cracks and gaps, and only then proceed to finishing the wall surfaces. In this case, it is necessary to very carefully bypass the baguette gluing line. Even the slightest shortcomings in subsequent repairs that were made in this place will become noticeable. If you are not confident in your abilities, then stick baguettes to the ceilings after decorative finishing walls

Joining the plinth in the corners is the most difficult stage of work associated with their installation.

Important! To avoid damaging the material, adjust the last straight strip to size after gluing the corner.

If all angles in your room are strictly 90°, the following recommendations will help you trim the baguette correctly:

place the baguette in the miter box exactly as it will be located on the wall surface;
Press the lower part of the plinth tightly against the wall of the tool;
Using a miter box, cut the parts of the fillets that will join in the corners to the required size;
Using a construction blade, finish finishing the outer sides of the parts;
check the evenness of the joints by applying the elements to each other at right angles so that there are no burrs left. Otherwise, gaps will appear at the installation site.

To glue baguettes in the corners of the room, proceed in the following sequence:

Having cut off the end of the products, attach the fillets to each other, check the place where they are joined for the presence of gaps;
cut off the interfering areas with a knife;
coat the baseboards with glue and attach them to the wall surface. If the glue requires curing, wait the specified amount of time.

Ceiling polyurethane or plastic skirting boards usually have a white color, so many people want to give baguettes a different shade that will suit the style and design of the room. There are several other reasons why there is a need to paint glued plinths:

Often the surface of the baguette contains minor defects in the form of scratches and dents, which are especially noticeable in bright lighting;
the loose structure of the material does not always look aesthetically pleasing. Skirting boards are easy to paint, so this flaw can be successfully masked;
Over time, white fillets lose their original shade and turn yellow. Painting and decoration can easily eliminate this defect;
applying a layer of paint will help hide the joints formed during the installation process;
It is recommended to coat wooden baguettes with varnish or special impregnations. This will not only make them more attractive, but will also extend their service life.

Before you begin painting work, you must select suitable paint. For foam products, water-based emulsion and acrylic compounds are best suited.

If you want to do original interior, use glazes - these are special paints with which you can get different textures on the surface of the baguette - natural wood or stone, patina, gold, etc.

It is better to paint ceiling skirting boards before they are glued. In this case, you can use not only regular paints, which are applied with a brush, but also sprayers.

The paint is usually applied in two layers to obtain the best result. In this case, before applying the next layer, the previous one must dry well.

measure the perimeter of the room:
divide the resulting value by the standard length of one baguette (2 m);
round the result up;
add two or three more elements for an unforeseen event (damage during installation or transportation).

Variety of shapes and types ceiling fillets often presents buyers with difficulties, then they need to choose the right product. After all, your own preferences do not always correspond to the chosen direction in the interior. To avoid mistakes, pay attention to the following tips:

for narrow and long rooms choose wider fillets;
in a low room, a thin plinth under the ceiling will look better;
minimalism will be emphasized by a modest white plinth; for lush interiors, you should choose pompous baguettes that imitate stucco;
if the color of the baseboard matches the shade of the walls, it will visually lengthen the room, it matches the color of the ceiling - the walls will become noticeably higher;
As for the material, it all depends on your financial capabilities. The cheapest are foam and polyurethane baseboards, the most expensive are wooden and aluminum baguettes. In any case, you can always paint the product in the desired color.

It is not difficult to properly glue a baguette to the ceiling. The main thing is that before installation, study the features of the products and choose a reliable adhesive.