A fence is not only a structure for the safety of people, but also a stylistic addition that gives beauty and a finished look to a summer cottage. There is a huge variety of fences. However, choosing a design that meets your needs is sometimes difficult. If you want your summer cottage plot looked modern, without spending much effort on arranging the territory, and at the same time you have a small amount of money, then the garden net - best option. How to choose a garden mesh for a fence? What should you consider when deciding on a purchase? We hope this article will fully answer the questions raised.

Garden plastic mesh has a number of advantages. Here are some of them:

1. Light weight, which greatly facilitates the transportation process. So, on average, a roll (coil) weighs 6–8 kg and has a length of 20–100 m (for comparison: a steel analogue of mesh weighs more than 23 kg).
2. The installation process is quite simple, which is why you can use this fence both permanently and as a temporary – portable one.
3. Wide range garden net. Manufacturers produce mesh in different colors with different cell sizes, widths and heights, which allows you to adapt the designs to any needs.
4. Does not corrode or rot. The polymer mesh does not need to be coated with protective antiseptics.
5. Durable. Plastic garden netting will serve you for at least 50 years.
6. Able to withstand heavy loads and not lose properties at temperatures from -60°C to +80°C.
7. During operation, the mesh does not change color and does not heat up, since these products have high level resistance to UF radiation and are characterized by a low thermal conductivity coefficient.
8. Made from environmentally friendly and safe raw materials.
9. Easy to care for. There is no need to paint or treat with all kinds of means, and any dirt can be removed with ordinary warm water from a hose.
10. As a result of the absence of metal in its composition, this type of fence does not interfere with the passage of radio waves and unhindered reception of radio and television programs is possible.
11. Low cost, which makes it accessible to families with different income levels. As a rule, the price of garden mesh made of polymers is at least 5 times lower than the price of its metal counterpart.

Of course, garden plastic fencing mesh also has its disadvantages, which are explained by the peculiarities of its design. This:

• Relative strength. A fence made of polymer mesh cannot protect against intruders, since the threads of the polymer mesh are easily cut.
• Transparency of the fence. Such a fence will not save the yard from prying eyes, strong gusty winds and dust.

To install fencing from plastic mesh you don't need any special equipment. As a support, you can use wooden or metal beams installed at a distance of 2–3 m from each other. You can attach the mesh to the beams using plastic or metal clamps or wire, and the mesh itself can be easily cut into pieces of the required size using ordinary garden shears (secateurs). In order to strengthen the structure, it is advisable to run wire along the upper and lower edges of the cut garden mesh.

Due to the low weight of the polymer mesh, one person can both install and dismantle it. Polymer garden netting is fairly easy to roll up and store until needed again.

In order not to miss anything when choosing a garden net, pay attention to the following points:

• First of all, you need to decide what type of fence you need: it will be a fence to enclose everything personal plot or a fence dividing the territory within the site into zones. It is worth noting that many experienced gardeners They are engaged in zoning only in order to protect plants from unfavorable conditions. And someone simply wants to separate the garden area from the recreation area, etc.
• Then you need to think about how tall your fence will be, and measure the size of the area that you are going to fence. These parameters are very important, since you will need to proceed from them when choosing a roll or rolls of garden mesh with the appropriate dimensions (meaning the length and width of the roll).
• If you want to decorate the area of ​​the proposed fence, then at this stage you must decide whether the fence will be a boring structure or whether it will be covered with climbing plants, creating shade and giving the area a beautiful finished look. And also here you have the opportunity to decide on the color of the desired fence: will it be standard green, khaki or another shade that suits you (for example, you can buy a mesh to match the color of the metal - a silver shade, or you can choose orange, black, white or red).

The cost of plastic mesh is affected not only by the weight and cost of polymer raw materials, but also by the cost of copolymers and dyes.

Since garden nets made of polymers are used for different types fences, there is a little trick regarding the choice of cell size. Mesh with large cells – perfect solution for a fence enclosing the entire plot of land. In addition, it is used for fencing shrubs, play areas, tennis courts, swimming pools, as well as for separating garden paths, arranging flower beds and beds.

With the help of a mesh that has large cells, your fence can easily turn into hedge. Such a grid will serve as support for spreading and climbing plants. For example, ivy, climbing roses, clematis, decorative grapes and others.

For fencing the territory of a summer cottage, the most suitable option is a plastic garden mesh F-50 with large cells.

When choosing a plastic mesh for a fence, you can get confused, not knowing what to give preference to - products from world leaders or products from domestic manufacturers. At the moment, plastic mesh from such world leaders as Tensar (USA), Conwed Plastics (USA or Belgium) and Tenax (Italy) has proven itself well.

For example, from wide range products Tenax (Italy), you can pay attention to the mesh gray“Millennium” (mesh size 34×48 mm), which is a good alternative to metal mesh and is particularly durable due to a special production technology using the process of molecular orientation of polymer fibers along two axes. This mesh is used both for zoning a personal plot and for constructing enclosures or pens for animals and birds.

For fencing the territory of a personal plot, as well as for constructing a fence for livestock and fencing against sand and snow drift, Tenax laminated mesh “Griffin” (mesh size 60×45 mm), which is distinguished by its flexibility and strength, can be optimally used.

Fence nets produced by domestic manufacturers, such as Stran, Lepse, Project (Slavros), are in no way inferior in quality and range of products to their imported counterparts, gaining more and more popularity in the market.

Who or what to give preference to is decided by everyone individually, based on their desires and capabilities. If you have some experience in this matter and would like to add your own tips to the article on how to choose a garden net, please write comments.

Video

The video shows the types of Tenax plastic mesh:

Evgeniy Sedov

When your hands grow from the right place, life is more fun :)

Content

Warm days have arrived and a large number of annoying insects are trying to get into the house. To solve this problem, it is necessary to install a mosquito barrier, which uses mosquito nets, which can be attached to both wooden and plastic windows. Such a purchase will help protect square meters of living space from the encroachment of various insects - primarily flying blood-sucking insects. Thanks to it you will feel comfortable both day and night.

What is a mosquito net

If you are interested in making mosquito nets according to the size of your wooden or PVC window, then keep in mind that it can protect you not only from insects, but also from fluff, dirt, and snow. In the fall, this design will become a reliable barrier to leaf fall, allowing you to keep the windows open. Modern options Such meshes are characterized by good resistance to physical impact, and at the same time are difficult to ignite. Fiberglass is used to produce many structures. A profile that is resistant to weather conditions is used as a frame.

Types

Before you buy mosquito net on the window, check out the varieties. Depending on the purpose, there are nets for windows (vents), doors, loggias, terraces and even strollers. In addition, such products are divided into universal and non-standard. The latter are ordered individually from specialized companies by owners of windows of the following shapes: arched, triangular, trapezoidal, etc.

In addition, they may differ in color and service life. There are also products with hooks, magnets and loops, corners and rods, with Velcro/buttons, and adhesive tape. On sale you can find both plain products and options in different colors, and even with a pattern. In addition, there is a classification of mosquito nets and other insects depending on the design:

Buy mosquito nets

You can order a mosquito net from a specialized point of sale, and in the online store with delivery by mail. Before choosing one or another protective kit, be sure to familiarize yourself with its advantages and disadvantages. Conduct some kind of price monitoring, visit as many resources as possible - maybe you will be able to get into some promotion with a significant discount. As for fastening the nets, metal Z-shaped brackets, special hooks, retractable mounts, etc. are often used for this.

Framework

This type of mosquito net is classic version, suitable for almost any type of window. Such models received widespread due to ease of use, versatility and low cost. Their fabric is made with different diameters mesh cells, due to which they can become less noticeable both from the outside and from the outside inside. This type of structure can be easily removed and can be washed under a running shower. One of the popular models is:

• name: Haft 13950-150;
• price: 450 rubles;
• characteristics: hinged mount, fabric – 100% polyester, weight – 130 g, size – 130x150 cm;
• pros: inexpensive, easy to install and remove, protects from insects, dust, poplar fluff;
• cons: it is recommended to remove it from the window for the winter, like many other frame models.

If such a standard anti-mosquito model did not suit you, then pay attention to another option, which is more universal. Mosquito without a separate installed mount:

• name: Haft 13950-150;
• price: 1850 rubles;
• characteristics: no separate fastening, size – 90-110x120-140 cm;
• pros: easy to install and remove, suitable for non-standard windows, no need to drill the frame during installation;
• cons: expensive.

Sliding

This type of mesh is great solution, if you need to save space, putting them in place is not much more difficult than frame products. In addition, such designs are lightweight and easy to use. They are installed mainly on balconies. The principle of operation of sliding structures is simple - the mesh moves away from the window opening along special guides. They are often made to order. A striking representative is the model:

• Name: sliding design from Decor City Group;
• price: from 2400 rubles;
• characteristics: material – nylon, profile – aluminum, manufacturer – Russia;
• advantages: easy to assemble and install, does not require special care, does not impede the flow of air into the room;
• disadvantages: high cost, inconsistency with some windows.

A cheaper, but no less aesthetic and excellent option from the same company is:

• name: mosquito net from Decor City Group;
• price: from 1200 rubles;
• characteristics: material nylon, aluminum profile, manufacturer – Russia;
• pros: easy to assemble, install, resistant to the vagaries of nature;
• cons: inconsistency with some windows.

Roller shutter

Installation of mosquito nets, the operating principle of which is similar to roller blinds or roller shutters, is not so difficult, the main thing is to choose the best option. These designs are very effective for balcony doors and large windows. Their canvas is easy to move both horizontally and vertically thanks to a system of guides and rollers.

• title: Praktika 43;
• price: from 5500 rubles;
• characteristics: system with attractive design, compact box, height – up to 2600 mm;
• pros: can be vertical, horizontal.
• cons: very expensive.

The design of the box and guides for roll models is made of aluminum alloy high quality, and more often to order. Their standard colors are white and brown. Pay attention to this option:

• name: System 43;
• price: from 79 euros for 500x500 mm;
• characteristics: one of the most affordable roll systems, does not have plastic jumpers, suitable for large windows;
• advantages: can be installed both on the window opening and on its frame;
• cons: very expensive.

Door

Door screens, which are installed in country houses or on the balcony. In appearance, they are no different from their window counterparts, but unlike them, they are made from a more powerful profile. The latter is made of aluminum alloy, after which it is coated with colored enamel. The design of the door screen is similar to the frame screen. A good option is:

• name: Irit IRG-600;
• price: 250 rubles;
• characteristics: equipped with magnets for closing curtains, size – 210x200 cm;
• pros: very cheap;

In addition, take a closer look at another option, which could be an ideal choice for a country home in summer time year:

• name: Magic Mesh Sky;
• price: 499 rubles;
• characteristics: material – dense synthetic, equipped with magnets for closing curtains, size – 90x200 cm, weight – 420 g;
• advantages: low cost;
• cons: relatively low strength.

Anti-cat nets

Compared to many other analogues, the Anti-Cat protective product can withstand the weight of a pet, thanks to which your pet will not fall out of the window. There will not be a single trace of scratches left on the high-quality mesh fabric. This is due to the fact that in the manufacture of Anti-Cats, nylon or vinyl threads coated with polyester are used. If you are looking not finished design, but a whole roll of canvas that can be used to equip all the windows of the house, then pay attention to:

• name: Bauset;
• price: 13,573 rubles;
• characteristics: 1 roll, width – 1400 mm;
• advantages: increased strength, easy installation, dismantling, protection against falling out of the window;

If you are looking for a ready frame option with Z-fasteners and a metal profile, then check out the model:

• name: Pet-Screen;
• price: 1500 rubles per 1 m2;
• characteristics: profile – 25 mm, canvas made of vinyl threads;
• advantages: high strength, easy installation, dismantling;
• cons: low light transmittance.

Anti-dust nets

Often, at a sale in Moscow, St. Petersburg or any other city in our country, you can come across a version of a mosquito net such as Anti-Dust. Its main purpose is to protect premises from dust and poplar fluff. Despite this, the product copes with its direct responsibilities, i.e. protection against insects. For its manufacture today they use heavy-duty material, thanks to which it is not afraid of anything. harmful effects precipitation or strong gusts of wind. One of the representatives of the Anti-Dust canvas is:

• name: Poll-tex;
• price: 1500 rubles per linear meter;
• characteristics: cell size – 0.25x0.9 mm, oblong (elongated) cells;

Another no less durable and effective, but cheaper analogue is:

• name: Micro Mesh;
• price: from 600 rubles per m2;
• characteristics: cell size 0.8x0.8 mm, good air permeability;
• pros: aesthetic appearance, European quality;
• disadvantages: dust quickly clogs into the cells, the need for additional care.

For strollers

Nets against mosquitoes, mosquitoes and other insects are great addition for a stroller with a child. Thanks to this, parents can safely walk with their child without fear of being bitten by blood-sucking and ubiquitous insects. This addition is very useful in warm weather. summer days. Some of its options are capable of trapping dust. The following model of stroller net has become very popular and in demand:

• name: Vitosha;
• price: 199 rubles;
• characteristics: size – 60x95 cm, weight suitable for any type of stroller;
• pros: protects from insects, attaches conveniently, allows light to pass through;
• disadvantages: dust quickly clogs into the cells, the need for additional care.

If you don’t like the described option or it doesn’t fit your baby’s stroller, then check out the model:

• name: Sportbaby;
• price: 126 rubles;
• characteristics: size – 180x30x250 mm, universal, has rectangular shape;
• pros: protects against insects, fluff, has the finest weave;
• Cons: difficult to put on the stroller.

How to choose mosquito nets

You need to choose a mosquito net with all seriousness. In fact, there is not much difference in the material of its manufacture, be it polyester, nylon, fiberglass or even cotton. Just evaluate their quality, test their strength a little and be sure to sniff - it is important that the product does not have any strong odors. The most important thing is to decide optimal sizes cells:

• Fabrics with mesh sizes of 0.6 mm or less do not allow air to pass through well, which negatively affects the cooling of rooms on hot summer days.
• You need to choose small cells provided that the house is located near a pond and you are often bothered by midges.
• For residents of city apartments it is quite suitable option from 1 to 1.2 mm, but if you have allergies, then take a closer look at the meshes, the cells of which can hold pollen and fine dust.

Also make sure that the frame of the product is really strong, otherwise you will soon have to fork out for a new purchase. In addition, do not forget about care, because... Some canvases are permanent and very difficult to clean. At least once a year, wipe the mosquito with a damp cloth and soapy water. Many designs can be pre-removed, making them easier to clean, but there are non-removable models.

For many people, a dacha is not just a place to relax, but a whole world in which you can take a break from the bustle of the city and be alone. If you are tired of annoying neighbors, their children and homeless animals visiting your summer cottage without an invitation, then it’s time to put up a special fence - a fence. A budget option when building a fence is the so-called garden fence nets. Such a fence can serve as temporary protection until time and financial opportunities arise to build a fence made of brick or wood. This article will answer in detail the question of how to choose a garden mesh for a fence.

Features of choice

Garden fence mesh fits perfectly into any design. Their main advantage is stability. From the point of view landscape design, it is advisable to fence an area with a beautiful view with a transparent fence. This extraordinary move is called a borrowed landscape, according to which the area of ​​the site visually appears larger.

When choosing a garden net, you should consider the following key points:

1. Purpose of construction and type of fence. The first category of summer residents chooses fence nets to protect them from strangers on the site, and the second - to protect plants from unfavorable conditions. Some plot owners divide the garden into zones for personal convenience in navigating the plot, highlighting special boundaries for recreation areas. Owners of summer cottages with a normal average income want their garden mesh fencing to be attractive and stylish, taking into account architectural features buildings and invisible to robbers.
2. Colors. This indicator is important if the owner of the site wants to build a fence from the mesh for the purpose of decorating the site.
3. The height of the fence and the size required to enclose the area. These 2 indicators are the most important, because the choice of the length and width of the garden net depends on them.
4. Price. Compliance with price and quality will always be a pressing problem for summer residents. On the one hand, a building that is too expensive can attract the attention of country thieves, on the other hand, it is too cheap material may quickly become unusable. Therefore it is important to find quality material at an affordable price.
5. The need for maintenance of the structure. Nobody wants to spend extra time for mesh care. Therefore, when choosing a mesh for a fence, you should pay attention to the content of the structure with PVC, which will save you from unnecessary work.

Garden mesh is made of high-quality steel wire, fastened together spot welding or weaving. The garden mesh is coated with special enamels, powder paints, polymer and zinc coating depending on the type of mesh.

There is no uniform classification of garden nets. The main criteria for dividing structures can be production technology and installation method.

Depending on the installation method, fence nets can be sectional or tension. In sectional fencing, the mesh is fixed inside a welding frame from an angle or profile pipe. Fences made from such a mesh are much more reliable and durable than those made from tension mesh due to phased installation. Garden nets sectional type can be manufactured in any shape, making it possible to build unique and non-standard fences.

Grid in tension fences can be stretched along installed poles. The advantages of installing this type of garden mesh are its low cost and the ability to quickly install.

Grids can be divided into the following types:

• Welded mesh fence.
• Chain-link fence.
• Plastic mesh.
• Wire mesh is known for its strength, so it is used not only as a fence, but also in production processes. This mesh is sold in cards, rather than in the usual rolls, due to its rigidity and strength of the material. When purchasing such a fence, you should choose a mesh with the most large size cells.
• Lightweight metal mesh. Visually, such a mesh seems light and resembles threads, so its use is advisable for temporary fencing of an area. This mesh is considered one of the cheapest, but its service life is short.

Welded mesh is a fairly common material in the construction of mesh fences due to its strength due to the predominance of low-carbon steel wire in its composition.

In turn, welded mesh can be:

• Not galvanized - very few people choose this type of mesh for fencing because of the special care it requires. This mesh is easily subject to corrosion and to protect it it is necessary to use special anti-corrosion compounds.
• Galvanized - caring for such a fence does not require special treatment, because the zinc coating is already applied to the mesh after release. This garden net can last a long time.
• With a polymer coating - such nets can be found in parking lots, schools and other government institutions, which do not require significant budget expenditures.

The main advantages of such a mesh for the garden are:

• easy to maintain, in particular, no cleaning or painting is required;
• long service life, can be up to 50 years;
• light weight;
• wide range of modifications;
• beautiful appearance;
• price;
• ease of installation;
• do not block the penetration of sunlight and air.

The disadvantages of this design are:

• transparency, which will not allow visual delimitation of the territory;
• does not protect the area from the wind;
• low strength, such a fence is easy to saw (which can be to the advantage of attackers).

Garden mesh netting is the most preferred and affordable of all materials.

The main advantages of such a grid are:

1. Reasonable price.
2. Easy to care for. Periodically it is necessary to touch up the sticky areas and renew the layer of anti-corrosion coating.
3. Simple and convenient installation.
4. Service life is more than 20 years.

The types of chain link mesh used in the building environment are PVC braided, zinc coated, and ferrous.

The main advantage of ferrous metal chain-link fencing is its low price. The disadvantages of this design are fragility and the need for special care. To protect against rust, such a mesh needs to be tinted periodically, every 3-4 years. Also, such a garden mesh should be checked for corrosion.

Galvanized fence mesh will never rust, does not require special care and its service life will be up to 20 years. The only drawback of such a fence is the price. Among all types of such fencing, such a mesh is the most expensive.

One of effective models Chain-link mesh is a PVC-braided mesh. This material protects the metal from corrosion and is an excellent decorative fence.

When choosing a chain-link mesh, you should pay attention to the size of the cells. The smaller the cell, the stronger the mesh.

Sometimes a garden net made of plastic can become a worthy analogue of a metal one.

Plastic meshes are characterized by:

• Light weight, which simplifies the process of transportation and installation.
• Installation and dismantling of the fence can be carried out by one person.
• Easy care. This mesh does not require processing by special means because it is not subject to corrosion. All contaminants are easily washed off with ordinary water.
• Long service life exceeding 40 years.
• Low cost. Prices for plastic mesh are significantly lower than for metal fencing. The pricing of plastic mesh for the garden depends on the cost of dyes and the weight of the mesh itself.
• Environmental friendliness. Such meshes are made of non-toxic materials.
• Resistant to temperature changes. At high temperatures, this mesh will not lose its shape or color.

The main significant disadvantages of plastic mesh include:

• Low strength, so this design will not be able to protect the area from penetration by unauthorized persons.
• Inability to protect the area from strong dust and wind.

When choosing such a mesh, you should pay attention to such manufacturers as Tenax, Tensar, Conwed Plastics, Stran, Lepse, Project (Slavros), known for their quality.

Thus, choosing a garden mesh for a fence is a process that depends solely on the financial capabilities of the owner of the summer cottage and the desire to decorate the site.

Video

The video provided details the benefits of garden netting:

The mesh is a rolled building material used to reinforce internal and external surfaces for various purposes. The maximum effect is observed in new houses that have not yet gone through the shrinkage stage, but in a number of works it cannot be done without it. The cell sizes, diameter and base are different; in each individual case it is important to choose the right option.

The material is used to strengthen the working coating, protect the applied mixture from delamination and cracking, and prevent deformation of the finish. Its installation significantly reduces the influence of mechanical, humidity and temperature influences and increases the quality of adhesion of solutions to substrates. Plastering walls on a grid (and other surfaces) is considered mandatory when:

• External facade cladding.
• Reinforcement of floor screeds.
• Finishing smooth tile building materials with low adhesion, such as polystyrene foam.
• Strengthening areas with a high risk of plaster shedding: openings, slopes, joints.
• Thick-layer application of the solution (over 2 cm).
• High risk of building shrinkage.

Types of meshes, features and applications

The base material must be strong, alkali-resistant, as light and durable as possible; steel, plastic and fiberglass have suitable characteristics. Hardware Depending on the manufacturing method and type of fabric, they are divided into thin and flexible woven (with a small wire diameter), braided, welded (the most rigid, recommended for high mobility of the base) and expanded metal, obtained by cutting holes in a stretched sheet.

Depending on the rolled products used, they are all divided into types of stainless steel and galvanized and non-galvanized wire. When using them as a mesh under plaster, it is worth choosing a protected type, with a zinc coating; it better withstands the alkaline effects of cement and is less susceptible to corrosion.

Fiberglass fabric is made from strands of molten glass to increase strength, flexibility and resistance to moisture, alkali and biological effects it is impregnated with special compounds. It is the thinnest, it is recommended to choose it when finishing, applying a rough or finishing layer within 2-3 cm, arranging warm and self-leveling floors. TO characteristic properties Also include high thermal stability (up to 1500 °C), this plaster mesh tolerates temperature changes well. The intended purpose of fiberglass is determined by the size of the cells (for interior works It is advised to buy a 2x2 m canvas, for facades and exteriors - 5x5).

The polypropylene-based variety is universal; its advantages are: lightness, compactness, strength and affordable cost. The specific option depends on the size of the cells: small (up to 6 × 6) is used for reinforcing thin-layer plaster (up to 20 mm), medium (13 × 15) is recommended to buy when reinforcing coatings up to 5 cm thick, including loaded ones, large (22 × 35) – when working with large surfaces and uneven facades. This group includes many subtypes and brands: Plurima (based on polypropylene with high chemical inertness), Syntoflex (ultra-strong and geometrically stable brand), STREN (recommended for use under the influence of aggressive environments), Armaflex (reinforcing any type of masonry, including uneven ones). Price square meter depends on the quality, chemical inertness and strength of the plastic and varies from 11 to 110 rubles.

Which mesh should I use and in what cases?

The main determining criterion is the thickness of the applied solution when carrying out work indoors, reliable basis and thin-layer leveling (up to 20 mm) it can be abandoned. When cladding facades, reinforcement is always carried out: metal mesh reinforcement for plaster is selected when the wall level deviates by more than 30 mm, and if there is a significant risk of destruction of the base or shrinkage of the building, it must be welded. In other cases, to cover standard masonry, fiberglass or plastic with a density in the range of 160-300 g/m2 is sufficient. Smooth foam boards that insulate the facade are recommended to be finished with light fiberglass.

It is better not to skimp on external surfaces; these areas require varieties coated with zinc or impregnated with alkali-resistant compounds. To eliminate doubts, the material is checked by immersing it in a soapy solution for several days; high-quality products do not spread or change color. When purchasing façade mesh, attention is paid to the breaking load value. On flat areas, a blade with 1800 N and above is used, on curved areas - in the range of 1300-1500.

When finishing interior spaces, the same rules apply - a thick-layer coating requires reinforcement with metal, a thin-layer coating requires reinforcement with fiberglass or polypropylene. The latter type is also used as masonry: an elastic fabric with 5x5 cells is placed between bricks or blocks and increases the adhesion of rows and products. Recommended density range for synthetic mesh under interior plaster is 110-160 g/m2, this is enough to ensure crack resistance and keep the layer within 2-3 cm. For sealing joints of building boards (plasterboard, fiberboard or chipboard), strengthening window openings and areas adjacent to the ceiling, reinforcement of mastic roofs, serpyanka is well suited - thin fiberglass with a cell size of 2x2 mm and a density in the range of 45-60 g/m2.

The nuances of installing a mesh with your own hands

The metal variety weighs the most and requires secure fixation with screws or nails. It is degreased (galvanized steel is simply washed with water or wiped with a rag) and cut into pieces with special scissors the right size taking into account the obligatory entry into neighboring areas by 10 cm. In some cases, holes for dowels are prepared in advance, the step is 25-30 cm, on average 16 fasteners are used per 1 m2. The edges are fixed if possible mounting tape(when working with large-mesh options, its use is mandatory).

It is better to finish metal-reinforced surfaces in two layers (not counting the spray), the second, thinner and leveling one is applied after the first has dried slightly. This type must be reliably covered with the mixture; it is important to choose the correct cross-section and method of connecting the wire; the thickness of the coating cannot be reduced below the recommended value.

When working with fiberglass and polypropylene meshes for plaster, the mortar itself or self-tapping screws can act as fastening materials. In the first case, the canvas is placed in the middle of two layers; to increase density, it is better to unwind it directly on the spot, rather than cut it into separate pieces (the exception is the finishing of foam plastic, where segments are better suited). Plaster in the direction from the middle to the edges.

During the process, it is important to prevent the formation of air bubbles and avoid stretching of the plastic mesh.

But the more reliable and correct option is to fasten the dowels to a still dry wall, followed by spraying and applying the first layer as a base. The number of fasteners is minimal (one per canvas with a uniform step of 1-2 m), with a significant level difference they are used for installing beacons. The first layer of mortar is placed along the width of the product; after laying it, they proceed to the adjacent one, tracking the overlap of 10-15 cm with each other. Plastering for the purpose of leveling should also be done from the middle to the edge. Avoid sudden movements with a spatula, especially when working with facade mesh, otherwise they come off along with the finishing composition. Correctness is checked visually - if they are visible under the leveling layer, then it is better to increase it by 1-2 mm.

Material cost

Name, basis	Special properties, brief description	Cell size, mm	Roll size, m	Price per 1 m2, rubles	Price per roll, rubles
Plaster woven mesh made of galvanized wire	Wire diameter – 0.25 mm	0.63×0.63	1×30	468	14040
		1×1		208	6240
	The same - 0.4	2x2		162,50	4880
		4x4		143	4290
	The same - 0.6	10×10	1x60	65	3900
		15×15	1x80	62	4990
Non-galvanized chain-link	Wire diameter – 1.2 mm	6x6	1x10	240	2400
Welded galvanized	Wire diameter – 1 mm	10×10	1×25	240	6000
Fiberglass mesh	Serpyanka with a density of 45 g/m2, white	2x2	1×50	18	900
	Plastered, impregnated with alkali-resistant polymer composition, 60 g/m2, white	5x5		21	1050
	For facade, 160 g/m2, blue			31	1550
Plastic mesh Station wagon S	Colors: khaki, black. Used for finishing and rough layers up to 1 cm thick	6x6	2×100	14	2800
Syntflex E	High-strength, flexible, biaxially oriented polypropylene, for reinforcing layers up to 5 cm	12x14		65	13000
C1-3, polypropylene	Gray color, for reinforcing plaster (up to 2 cm) and masonry	13×13	1×30	21	630

Today, a chain-link fence is considered one of the most popular types of fencing. Completely different objects are surrounded by such a fence: dachas, sports and industrial sites, enterprises, parks, private territory . In each specific case, it is worth choosing a specific type of mesh. What are the main types of fence mesh? and how to choose the one most suitable for specific conditions?

Chain-link mesh

One of the most popular options for mesh fencing. Every second dacha plot is fenced off with it, and all thanks to numerous advantages:

• durability;
• strength and ability to withstand a wide range of temperatures;
• ease of installation;
• relatively low price;
• the ability to reuse the removed mesh;
• The chain-link mesh visually separates the boundaries of the space, but does not interfere with the penetration of sunlight.

This grid option is great not only For summer cottages , but also for fencing various sports facilities, playgrounds, reservoirs etc.

Types of mesh

The chain-link mesh can be like this three main types:

When choosing a chain-link mesh, attention should be paid to the size of its cells, which can vary from 25 to 70 mm. The smaller the cells, the stronger the mesh, but the less light she will miss. The choice must be made based on your own requirements and the characteristics of the fenced area. So, for the dacha A mesh with cells measuring 40-60 mm is optimal: this way enough light will penetrate and the strength will be acceptable. For children and sports grounds It’s better to choose a fish with cells no larger than 40 mm so that it can withstand, for example, being hit by a ball.

Welded mesh

Welded mesh is considered the strongest and most durable, which is determined by the peculiarities of its production. That's why it's usually used for fencing sports fields and tennis courts. It is also used for fencing industrial and construction sites and private areas.

If chain-link mesh is sold in rolls, then welded mesh is often sold in cards, which, again, is dictated by its properties and production features. This mesh is based on strong steel wire with a diameter of 3 to 5 mm. As a rule , the cell size is 100*150 mm, and the card size is 2*2.5 m. All the rods that make up the mesh are welded to each other at the intersection points, which gives the mesh its name. Thanks to this feature, welded mesh fences are strong, reliable and durable. Moreover, each fragment of the mesh is additionally equipped with stiffening ribs: they are responsible for preserving the original shape of the mesh map and the fence from it.

Features of welded mesh production technology

The mesh can made in two ways:

• Before the welding process, the wire is galvanized, but the protective coating is partially erased at the welding points. This means that in the future it is in these places that a corrosion process can develop;
• welding, and only then galvanizing. This is a more advanced mesh production process, which removes its weak points and makes it as resistant as possible to all environmental influences.

By the way, it should be noted that some manufacturers additionally coat the welded mesh with polymer, giving it maximum protection and durability. A wide selection of similar welded mesh is presented on the website http://sitka.com.ua/ru/page-51/.

Due to its structure, welded mesh has a lot of advantages. By strength a fence made from it can be compared to a fence made from metal sheet, and special protrusions do not allow free entry into the fenced area through the fence. In addition, such a grid can be used to fence areas with any terrain, and if any fragment of the fence is damaged, then one of the grid cards easy to replace. For all its strength, such a fence easy to install, is light weight and skips sunlight. The only negative is the higher price compared to chain-link mesh.

Corrugated mesh

Corrugated mesh, which is often called channeled, different high strength, therefore, it is used not only for fencing, but even in some production processes. Before making the mesh, the wire is slightly bent to create a wavy profile, and then the wire is intertwined as in the manufacture of fabric.

Corrugated wire is sold in cards rather than rolls due to its strength and rigidity. The thickness of the rods may vary from 2 to 7 mm, but for fencing dachas and sports areas, a mesh with a wire thickness of no more than 3 mm is suitable. Cell size can vary from 1*1 cm to 10*10 cm depending on the area of ​​application of the mesh. For fencing, it is better to purchase a mesh with maximum size cells.

Lightweight metal mesh

This mesh looks light even in appearance, which is why it is used for temporary fencing of areas only for the sake of marking the boundaries of the territory. Excellent for fencing e.g. construction sites.

Outwardly, such a mesh can even resemble thread, it is so thin and light. In this case, the transverse and longitudinal wires are connected by a hinge unit, and the size of the cells varies even in one roll. The height of the cells starts from 15 cm and with each row decreases to 5 cm, and then increases again. In this way, the required strength is achieved while the mesh is light. This option is considered the cheapest, but does not have great durability: it will survive temporary construction work, but nothing more.

Plastic mesh

Plastic mesh today in some cases they can become a complete replacement for traditional metal analogues. The basis of such a mesh is an extruded polymer, from which subsequently interwoven fibers are made.

The main advantages of plastic mesh include:

• simple transportation and installation process, since the material is very light, and you can create a fence even without additional connecting elements;
• huge selection meshes that differ in color, size and shape of the cells, and the height of the canvas itself. All this allows you to create a structure of the required size and with the required parameters;
• polymers more resistant to negative factors environment . They are not subject to corrosion, so it will be unnecessary to regularly cover them with a protective layer of paint or any other means;
• plastic mesh withstands wide temperature changes without changing its properties;
• durability, which is measured in tens of years. So, the mesh can last about 40 years;
• safety and non-toxicity of the material;
• under the influence of direct sunlight mesh will not change either its color or its shape;
• easy to care for, because any dirt can be washed off with plain water.

But there is one significant drawback – the strength of the plastic mesh is low, therefore it cannot become a complete protection against attackers. That is why it is often used to fence certain areas within a garden, dacha or construction site.

Types of plastic mesh for fencing

Today they highlight several types of plastic mesh, which differ in purpose:

• garden trellis- most universal type plastic mesh. It is used to fence all kinds of garden designs, different beds, enclosures and paddocks. Moreover, it is often used as a basis for climbing plants;
• plastic mesh its structure resembles a metal analogue. It is based on high-strength polyethylene, thanks to which such meshes are considered the most durable of all plastic ones;
• emergency mesh often used on construction sites to mark high-risk areas, as well as during sports and cultural events. To highlight the fenced area, the mesh is painted with luminescent paint.

IN END

Of all those present at construction market types of grids, you can easily choose the one that will best suit your specific wishes. You always need to take into account the requirements that are put forward for the fence and compare them with the performance characteristics of different meshes.