DIY board chandelier. DIY wooden chandelier. A few words about self-assembly

Such a product would look great in a country or country house, in the hallway of the bathhouse and even in an apartment furnished in rustic style. But finding it in stores is far from easy, but affordable price and not at all possible. There is no need to rush to search online stores, because you can easily make it yourself. Let's consider two versions of the product, which differ from each other in the degree of difficulty of production.

Self-assembly of a simple product

To make a wooden chandelier of a similar design with your own hands you will need the following:

Wooden beam square section 10x15 cm.
Battery-powered LED lamps.
Chisel.
Hammer.
Needle file.
Drill.
Antiseptic.
Sander (fine and coarse sandpaper).
Stain.
Hanging hooks.
Chain.
Linen rope.

DIY wooden chandelier
Chandelier made of wood and bottles

Basic energy-saving lamps and their features.

Assembling a wooden chandelier with your own hands is as follows:

1. We mark the future location of the lamps on the timber. Draw contours of appropriate sizes.

2. Using a drill, we make many holes inside the contour, splitting the wood as small as possible.

3. Using a chisel and hammer, knock out the excess wood. It is advisable to make the holes through.

4. Using a needle file, level and sand the inner sides of the squares.

5. Sand the entire surface of the timber by hand or with a grinder.

6. We treat it with an antiseptic in several layers.

7. Protect the surface sandpaper the finest grains, cleaned from dust.

8. Cover the timber with stain of the desired color.

9. C reverse side products and make holes on the ceiling for hanging hooks.

10. Cut off sections of the required length from the chain and attach them to the hooks on the beam.

11. To enhance the decorative effect, we wrap linen rope around the edges and in the middle in several rows around the beam. The ends of the segments are fixed liquid nails.

12. We insert light bulbs into the holes, which are fixed in the sockets with liquid nails.

13. Instead LED lamps You can insert sockets into which energy-saving light bulbs will be screwed. The wiring will be hidden from the top of the product and in the fastening chain.

DIY veneer chandelier
DIY chandelier from branches

DIY options step by step master class from various materials.

DIY assembly of a wooden chandelier of a more complex design

To make a more complex wooden chandelier with your own hands, you will need the following tools and materials:

Untreated or debarked logs.
Shingles ( wooden slats) 2.5 cm wide and 0.5 cm thick.
Linen rope.
Ammo.
Coarse and fine grain sandpaper.
Stain.
Chainsaw or hand.
Drill and cutter.
Screws with bolts.
Solvent (turpentine, acetone or gasoline).

The product is manufactured as follows:

1. A third of its thickness is sawn off along the log (a fourth is possible). You will need three of these blanks.

2. Their length is determined individually depending on the desired dimensions of the product.

3. Bark is removed from untreated logs.

4. The surface of the workpieces is wiped with a solvent to remove any resin that has emerged.

6. Then they are folded into a triangle, so that one edge of the workpiece overlaps the edge of the other, and the second lies on top of the edge of the third.

7. Marks are made at the joint for drilling. In the center there is a large hole for the cartridge, on the sides there are smaller ones for screws.

8. Large ones are cut out with a milling cutter through holes with a diameter that allows you to insert a cartridge into them. A drill is used to drill through holes of smaller diameter for screws.

9. Closer to the vertices of the triangle, three more holes are drilled from the sections of logs to thread through them the ends of the rope on which the product will be suspended.

10. The surface is sanded with fine sandpaper.

11. The shingles are sawn into small details the same length.

12. Lampshades are assembled from chopped shingles, which were previously coated with antiseptic and stain. Two parts are placed parallel to each other, two more elements are placed on their edges, which form a square. One lampshade consists of 24 elements.

13. Fastening of parts in the lampshade is carried out using liquid nails.

14. The blanks are coated with antiseptic and stain, assembled together and fixed with screws and bolts.

15. Lampshades are glued to the blanks using liquid nails or wood glue.

16. The assembled product is varnished.

17. The edges of the ropes are threaded into the holes, which can be hung, for example, on a hook.

You can make a completely elementary version of the product, which is presented in the form of branches tightly tied together. They can be painted or varnished, and lamp sockets with lamps are hung on long cords from above. Such option will do for a home in a minimalist or eco-style.

Photo
In the design of private houses, wood is most often associated with antiquity. Therefore, lamps made of wood have an ancient appearance. The most popular designs are chandeliers in the shape of a cart wheel.

Diagram of a wooden table lamp.

How to make a lamp with your own hands from wood?

Advantages and disadvantages of wooden structures

A design of this type has the following advantages:

if you place candles evenly, the design will give equal illumination to all elements of the room;
the knitting needles will practically not create any obstacles to the light.

The same advantages have modern styles tions, but today instead of candles made of wax and splinters, lamps are used. In most cases, such designs are made in the form of a candle.

Wood structures have the following advantages:

Diagram of a round wooden lamp: 1 - segments for the rim, 2 - turned spoke, 3 - hub.

The material is environmentally friendly. Not only will he not highlight harmful substances, but will also saturate the air with aromatic resins, which make people’s breathing easier.
Wood can be easily processed. If for the production of plastic or metal structure will be needed special tools, then you can make your own wooden lamps using a minimal set of accessories.

Disadvantages of wooden structures:

Wood is a flammable material. It is not recommended to place elements made of this material next to incandescent lamps. If the contact in the lamp socket burns out, the structure may catch fire.
Wooden ceiling lights are susceptible to attacks by beetles, fungus and other pests. Suffer least from rot and pests conifers trees. For hardwood It is recommended to use antiseptic agents that can reduce the flammability of the material.
Wood is a hygroscopic material. It absorbs moisture from the air, as a result of which, during the drying process, the material can change volume, shape or crack. For the design to serve for a long time, you will need to provide it with constant temperature and humidity.

Nuances to consider when making wooden structures

In the process of constructing wooden lamps, the following nuances must be taken into account:

Scheme for assembling a lamp from wooden rings.

The structures must be of such a shape that all heating elements are removed from fixtures made of wood. The lamps should face up, since only in this case the rising air flow will not cause deformation of the wood.
Rules fire safety It is prohibited to place wooden chandeliers under flammable elements.
A wood lamp is great for a bedroom or living room. IN kitchen area or a bathroom where there is a fairly large amount of steam, such structures are not allowed.

In the event of a phase short circuit, you can easily get an electric shock.

Making a lamp in the shape of a coffee service

To make a lamp with your own hands, you will need to prepare the following elements:

LED wooden lamp diagram.

Dry board made of any type of wood. You can use either ordinary pine or birch, or ash. Oak, which does not need to be painted or varnished, is also suitable.
Several translucent coffee cups and a saucer to go with them.
Several cartridges for a small base with fasteners for them.
Required number of light bulbs. In this case, it is recommended to use LED elements.
A small number of rubber gaskets. Their number will depend on the method of securing the cartridges.
Two-core copper wire of small cross-section and short length. It is best to use a wire with a cross-section of 0.75 mm.
A thin chain or twisted cord. These elements will be used to secure the product to the ceiling structure.
Required number of screws with rings. The lamp will be suspended using these elements.
Electric drill.
Drill bits for working with wood and tiles.
Pliers.
Screwdriver or screwdriver.

The manufacturing process of the structure is as follows:

The planed board is processed with sandpaper (first coarse, then fine).
Next, you will need to drill several holes in the places where you plan to place the cartridges.
If noble types of wood are used, then further processing of the material will not be necessary. If other types of wood are used, the material must be coated with stain, then dried and varnished in several layers. On outdoors nitro varnish will dry for several hours, because this process won't take much time.

At the next stage, you will need to drill holes in the coffee cups and saucers, but it is very important not to damage them. In this case, you only need to use a drill for working with glass and tiles. Great efforts are not allowed. You need to drill at a low speed, and during the process you need to make sure that there are no distortions. If you press too hard on the electric drill, the bowl or saucer may break.
Wires must be attached to all existing sockets. On at this stage they should not be fastened to each other.
The entire structure is screwed together into a single unit. If the cartridges will use platforms with holes for fasteners, then they need to be pulled to the board through the holes in the saucers or cups. If there is a threaded pipe and a nut at the end of the cartridge, then they must be passed through the cups, saucers and board. Between metal and glass elements It is necessary to install rubber gaskets. You can make such a device yourself from an unused inner tube from a bicycle or car.
You will need to screw screws with rings into the back of the board.
The cartridges are connected in parallel. There is no need to leave twists that are wrapped with electrical tape. Care must be taken to make even that part of the lamp that no one can see. To fasten the wires you will need to use a block.
The block must be fixed to the back of the board using any method: a small amount of adhesive mixture or screws. In it you need to clamp a piece of wire that will be connected to the wiring.
On the back side, chains or cords are attached to the rings. The second end of these elements is fixed to a hook in the ceiling. The wire must be routed through one of the circuits. Finally, you need to install the light bulbs.

Plywood lace design

Tools for making a wooden lamp.

It should be noted that this design is not ideal from a fire safety point of view. However, in this case we use LED lamps, which are economical. It should be remembered that such devices practically do not heat up. Therefore, there is no risk of fire in this case.

From thin plywood using hand jigsaw you can make masterpieces of applied art. You can make such lamps with your own hands as follows:

First of all, you will need to sand the plywood sheet.
Using carbon paper, you need to transfer the drawing of the parts.
The structural elements will need to be cut along the contour.
You will need to drill holes inside each of the pieces that need to be removed. In this case, it is recommended to use a drill 1 mm thick.
The next step is to cut out the internal parts.
With small files various forms You will need to clean the edges of the structure.
Next you need to fasten all the elements together. To do this, it is recommended to use an adhesive mixture. It should be noted that PVA glue may turn yellow after some time. Therefore, it is best to use a special adhesive solution for wood. Remains of the adhesive mixture on visible parts of the structure will need to be carefully removed.
At the end, the product should be varnished.

If you plan to use incandescent lamps, you should remember that their power should be less than 40 W.

They need to be placed as far as possible possible distance from wooden elements. Only in this case can the lamp overheat be avoided.

Other options for wooden lamps

You can make other lamps with your own hands:

Construction made of boards and rope. In this case, several matte lampshades are used as light sources. There is nothing complicated in making such a design. It should be noted that in this case, only energy-saving or LED light bulbs should be used. High power incandescent lamps often create fires.
Bars with pots. To drill through the bottoms of the pots, use a tile drill. In this case, it is not allowed to install incandescent lamps of any power.
A chopped log with soffits. It should be taken into account that it is difficult to hollow out the product.

Making lamps from wood with your own hands is quite simple. You just need to show your imagination and prepare all the elements that will be needed to make the structure.

Light is one of the most important factors, which affects our life. In addition to the main function of lighting, it can create a unique atmosphere, helps to optically manipulate the size of a space, and also has enormous decorative properties.

Light is an important architect of the garden and terrace. It can create a romantic mood, highlight the beauty of plants, or simply blind the darkness, allowing you to spend time outside in the late evening and at night. Lighting itself can take on highly decorative forms or, conversely, provide an opportunity to enjoy its elegant simplicity.

A Brief Overview of Types and Styles of Wooden Lighting Designs

Many people love classic lanterns that illuminate an open space. The wooden part of the garden lantern will fit perfectly into a cozy composition. With the help of such lighting you can create a real idyll, especially on hot summer evenings.

For those with beautiful country houses, made in the style of antique wooden castles or taverns, lighting fixtures made with wooden elements would be appropriate. Large chandelier made from natural wood, will decorate the entire interior. For example, a chandelier made of a wooden wheel.

The original proposal of a wooden lamp for the living room is a chandelier that has been twisted into strips of natural wood veneer. This three-dimensional, intriguing shape will provide a subtle play of light and shadow in every living room. And during the day it will be a decoration. Wood veneer covered acrylic varnish, will delight others for many years.

A wooden floor lamp, or desk lamp, made in a thin, simple and strict geometric shape without curls and various additional decorations. Finished with acrylic varnish, they will add charm to any bedroom.

To stylishly decorate the interior of a sauna (bath), it would be appropriate to use lamps in the appropriate style. Decorative lattice, made from wooden planks various designs, will not only become an elegant and harmonious decor for the steam room, but will also perform the protective functions of the lamp from possible damage and will contribute to the soft dispersion of light, creating a relaxing effect.

If you are bored with the monotony of the interior, in particular in matters of lighting, and you are ready to change the design of the lamps yourself, feel free to get to work!

Instructions for making wooden lamps

Let's look at several master classes on how to make wooden chandeliers with your own hands.

It’s easy to do this kind of work, and the result will captivate you with its elegant forms.

Lamp in the form of wooden squares

What is included in the geometry of the room? Walls, furniture, curtains, doors and windows. But not only that. You can refresh the design with an unusual chandelier, the shape of which will resemble rectangles connected by the edges of each other, with one diagonal running inside each rectangle.

To make a chandelier you will need:

1. 18 pcs. wooden planks.
2. staple gun and staples.
3. Ready-made metal lamp socket.
4. Paints for metal.
5. Ruler.
6. Pencil.

Step by step instructions:

Preparing a chandelier frame from wooden planks of natural color. You will need 4 pcs. long identical strips - for vertical elements, and 8 more pcs. smaller ones - for transverse inserts.
Create a chandelier frame. You need to take 2 pcs. long planks and place them parallel to each other, 2 pcs. short slats are placed at the ends, perpendicular to the long slats. Using a staple gun, the planks are stapled together. The result is one facet of the future frame. You will need to perform the same element again.
Then, using 2 pcs. the remaining short strips, prepared earlier, rectangles are fastened together in the upper and lower parts. Add designer look The entire structure can be constructed by attaching a diagonal strip to the resulting frame inside each rectangle. To make the resulting frame look neater, before attaching the internal diagonal strips, their ends are cut at an angle of 45 degrees.

To attach the light bulb itself, you need to take a ready-made metal pendant for lighting. Metal parts painted in the desired color. While the paint is drying, you need to cut a hole in the frame to secure it to the factory hanger. The diameter of the hole should not be much larger than the diameter of the lamp pendant tube. But the inside must be secured with a washer or stopper. When the paint has dried, you can attach the chandelier to the ceiling, securing all the elements well. The last thing is to screw in the light bulb.

The advantage of such products is that wood is easy to work with and is safe because all electrically conductive parts are hidden. A DIY chandelier can be adapted to any interior.

Tangle chandelier

Making a spherical lamp (in the form of a ball), which can be used as a night light if you provide a low-power light bulb.

Materials and tools:

1. Very thin wood veneer(the main element of the lamp).
2. Wood glue (PVA is possible).
3. Clamps.
4. Electric socket for a low-power light bulb.
6. Pencil.
6. Scissors or stationery knife.

Stages of work - blanks, fastening, connection

If there are no ready-made veneer strips, you can cut them from thin plywood or thick cardboard. The stripes can be marked with a pencil or simply cut out, since they do not have to be the same. All design solutions are welcome.

Pasting blanks.

The strips are rolled up in a circle of a certain diameter, gluing them at the points of contact. For good effect gluing, the joints are secured using stationery clips(binders). In the process of such twisting and gluing, inserting veneer hoops different diameters inside each other, a spherical structure is obtained.

Chuck mount.

From a piece of plywood you need to cut a square - a limiter. A hole is cut in the center of the square with a diameter the same as electric chuck, which needs to be threaded inside the cut square until it stops. The inner part of the cartridge is fixed on the back side of the square with a cartridge clamp. The wire with the attached holder for the light bulb is pulled through the chandelier model wound from veneer until it stops with a plywood stop.

Connection.

The wire is pulled out from the chandelier, taking into account how it will hang.

The light bulb is then screwed in, carefully pushing the strips apart and then pushing them back into place. All fastenings are checked, and now you can connect the finished chandelier to the network.

Loft style lamp design

Simplicity of details - distinctive feature loft style. It is quite easy to construct a lamp with your own hands - a sconce made of wood in this design.

Materials and tools required:

1. Wooden bracket for mounting the lamp.
2. Electrical socket, plug and light bulb.
3. Textile wire.
4. Spray paint for wood.

You can make a wooden bracket yourself, or you can buy a ready-made one. Drill holes in the right places through which the wire will be threaded and with the help of which the lamp itself will be attached to the wall. The next step is painting the bracket. According to the chosen design color palette the wooden blank is painted.

After each layer of paint applied, you need to give it time to dry.

A wire is threaded through the hole and wrapped in a nice loop around the bracket. An electric socket with a light bulb is attached to the top of the wire. Connects to the other end of the wire electrical plug. The lamp is ready.

Veneer chandelier

Unique pendant lamp made of flexible veneer will decorate a dining room or bedroom - its rounded shapes and neutral colors suitable for any interior design.

You will need:

an elastic sheet of plywood (the length of the sheet determines the height of the chandelier frame + a small piece of plywood for attaching the electric socket);
2 pcs. wooden hoops (hoops can be of the same or different diameters);
office or construction clips;
glue gun;
ruler;
pencil;
clerical or construction knife or large scissors.

Execution technology

We prepare tools and materials, and proceed to the master class.

Cutting strips of plywood for the chandelier frame.

Using a pencil and a ruler, parallel lines of the same length and 2 cm wide are drawn on the plywood - the boundaries of the strips of future chandelier elements, which are then cut out with a stationery knife or strong scissors. You can diversify the design of your future chandelier by cutting strips of different widths. In addition to the long strips, you need to cut 4 pieces. stripes that are almost 2 times smaller than the main ones. The function of these short strips is to hold the structure of the chandelier by holding together two wooden hoops.

Manufacturing a limiter for an electric cartridge.

To make a limiter the right size, you need to take the remaining piece of plywood that was prepared earlier, place the hoop of the upper part of the chandelier on it and trace the outer contour of the hoop along the plywood with a pencil. Then, using large scissors, the limiter is cut out. In the center of the limiter you need to cut a hole with a diameter the same as an electric cartridge. The stopper with the hole is glued to the top of the hoop of the chandelier mock-up.

Fastening the cut strips to wooden hoops.

First of all, 4 pieces are glued to the wooden hoops. short strips, strictly 90 degrees to each other, to tighten the structure. The hoops must be exactly parallel to each other. For better adhesion, you need to use clamps. After the 4 main holder strips have been glued, the space between them should be filled evenly with the remaining long strips, gluing them in the same way, fastening with clamps on the upper and lower hoops.

Today, in order to give individuality home interior we use many different design techniques. Lighting is often a very important part of the decor. Sometimes you just need to add the right element of lighting and everything immediately falls into place. In this article, the author describes a method for making an original wooden lamp that anyone can make. The work is not difficult, and any untrained person can cope with it.

To complete this work we will need.

Tool:

Ruler;
- metal scissors;
- hammer;
- pencil;
- wood hacksaw;
- clamps;
- grinding tool.

Materials:

Rail with a section of 1 x 1 cm;
- wood glue;
- small nails.

Let's start manufacturing.

We take a rail with a cross section of 1 x 1 cm and cut it into equal parts, in this case the author chose a length of 15 cm, but you can take the size of the slats at your discretion.

To prevent the rail from moving during cutting, we fix it with a clamp. As cutting tool we use a hacksaw.

You should get something like this.

Next, we take the obtained parts and put them in the so-called “well”, we line them up until we reach the height we need.

Since the ends of the workpieces may be cut unevenly and have defects, we sand them with sandpaper or use a bur machine with a special grinding attachment.

We get approximately the following.

Then we fix the finished parts together with wood glue, while trying to align them as evenly as possible again in the shape of a “well.” To ensure that there are no displacements, we place the workpiece under the press and let the glue dry.

The next day, let's see what we got.

Since the lamp generates heat, it is best to design the lamp so that the wood does not come into contact with the lamp. Next, we take a perforated tape, the thickness of which is 0.75 mm, from which we will make a fastener.

We additionally strengthen the finishing top slats with nails, since they will carry the main load. Then we attach two strips of tape using small screws.

In order to make the glow of the lamp a little softer and more pleasant to perceive, we make a so-called diffuser lampshade, use tracing paper, or organza, or other available material. This design will be fireproof, because the lamp will be fixed strictly in the center and will not come into contact with the inside of the lamp. We check that everything is properly fixed, nothing should be loose. Next, we put the cartridge on the suspension and clamp it with a clamping ring. We hang the lamp in the place we need.

We all know that the highest quality and useful material For interior design any room is a tree. Lamps made from this material are especially beautiful. This is due to the fact that correctly selected lamps in combination with wood provide a soft and pleasant light, just suitable for rest and relaxation. Where else can we relax if not at home?

It is worth noting that while possessing unquestionable advantages, such products are quite expensive. But if desired and with due diligence, such a lighting device can be made with your own hands. At the same time, you can save a lot of money and get a unique and beautiful chandelier.

Why tree?

IN modern world where is everyone big role Plastic began to play a role, and wood faded into the background; it still does not intend to give up its position in the interior. Today, due to the prevalence of plastic, wood has become a more expensive and presentable material, which is not accessible to all people. This is due to the fact that wood has the following advantages:

100% environmentally friendly. Only wood is environmentally friendly and natural material, undergoing a minimum of modifications during processing;
a positive effect on the human psyche and his emotional state;

Pay attention! Pine and spruce have the best relaxing effect. Such lamps are especially useful for patients with asthma, as well as for chronic respiratory diseases.

pliability of the material for processing. Lamps of any complexity and any appearance can be made from wood;
positive associative series. By using wood in the interior of a room, you will achieve greater comfort and also give the room a more impressive look;

Wood and interior

exquisite and beautiful appearance which will fit perfectly into both modern and traditional styles;
the ability to change the emphasis in the room or emphasize a single design idea;
availability of wide scope for creativity. Here, thanks to the large number of tree species, you can let your imagination run wild;
a large selection of species for the manufacture of lighting fixtures (chandeliers, wall or table lamps);
excellent combination of wood with other materials (glass, steel or openwork forging, paper, fabric, plastic, etc.).

The easiest way to make a lighting device with your own hands is from wood. Especially if it is a ceiling chandelier.
However, despite the rather impressive list of positive aspects of working with wood, it must be remembered that there are certain disadvantages here too. These include:

wood can easily catch fire. You should not use light bulbs in such devices that become very hot during operation;

Pay attention! Wooden lamps most often use LED or fluorescent light bulbs, which do not create a fire hazard.

the need to protect the material from the adverse effects of factors external environment: humidity, temperature and insects. Ceiling chandeliers are the most flexible negative influence wood insects. It is noteworthy that lamps made of pine needles or pine are less susceptible to damage by insects;

Antiseptic treatments

high cost of material, especially rare and exclusive breeds;
During drying, the chandelier may change its volume and also become deformed. As a result, cracks or chips may appear on the product.

These shortcomings, as well as ways to combat them, must be taken into account if you decide to make a chandelier for the ceiling with your own hands. Ceiling chandeliers, as well as other types of lighting fixtures, are quite easy to make with your own hands, especially if you know detailed instructions on this process.

What you will need

The set of what you will need when assembling a chandelier for the ceiling with your own hands may vary depending on the complexity of the design you have chosen. But the general list of what you will need, regardless of the model you choose, includes the following tools:

a set of tools for working with wood (for carving, etc.);
wire pliers;
hammer and screwdriver;
tape measure or ruler;
drill;
pencil;
set of brushes.

In addition, you will need the following materials:

Decoration materials

antiseptic agents for treating wood to make it more resistant to unfavorable factors premises;
elements of an old chandelier: base with plinth, light bulbs, wires, etc.;
decorative elements to give the ceiling lighting fixture the desired appearance. These can be a wide variety of things: cups, fabric, paper, badges, strings, etc.

Please note that this is only an approximate list necessary materials and tools. It can be easily supplemented with other devices that can simplify or improve the work ahead.

When assembling a ceiling chandelier with your own hands, you must follow the following rules:

the tree must be protected along its entire perimeter with a special solution. This DIY ceiling chandelier will serve you for a long time without compromising its performance;
To protect wood, you must use only high-quality products that have not yet expired. Otherwise, all your actions will come to naught in just a few years of using the product;
take care of the system for attaching the chandelier to the ceiling. Stylized chains can be used as fastening elements. The best solution There will be a multi-point fixation system. The fact is that the design can turn out to be large and relatively heavy. Therefore, it is necessary to create maximum conditions for safety;
when connecting the chandelier to the power supply, use the services knowledgeable person to avoid burning the device and causing electrical injury.

Lamp options

Homemade ceiling chandeliers made of wood can have the most incredible shapes and sizes. After all, there are a great variety of tree species. Here everyone can show their creative talent and create something new and unique.

Various options

In our article we present several of the most popular and spectacular types of ceiling-type chandeliers. But you have the right to modify or improve them so that they are more suitable for your room interior.
Let's look at them separately

Coffee service

Creating holes

This is a very beautiful type of chandelier that can be used in both the kitchen and living room. Here we take a board as a base (ash, birch, spruce or pine is best) and carry out the following manipulations with it:

drill holes in the board;
cover the board with stain after it has been sanded. If oak was taken, then you can do without painting and opening it with varnish;
We take several cups of coffee and saucers to go with them. You will also need wires and rings, an equal number of cartridges and twice as many rubber gaskets;
make holes in cups and saucers. To do this you only need to use special drill for working with tiles or glass;

Pay attention! You need to drill slowly and very carefully.

The chandelier is ready

Insert cartridges with wires into the holes made and secure them;
Next, we attach the resulting chandelier to the ceiling.

If desired, the lamp can be decorated. But the cups themselves are already an excellent decor. Remember that the main thing is to maintain the style, and not just hang on the chandelier everything that is unnecessary in the house.
If desired, such a lighting device can be hung by chains, attaching rings to the sides of the board.
The most difficult thing about such a chandelier is drilling holes in the ceramic cups and saucers, as well as connecting the product to the power supply.
In general, we can say that such a model is quite difficult to make with your own hands. But don't despair, there are much easier models to implement.

And the driftwood will come in handy

Scheme of cuts

An easier way to create a chandelier is to use ordinary driftwood brought from the forest. Moreover, light bulbs in this situation can play the role of stylized fruits, leaves or other decorative elements. The main difficulty here will be masking the wires.
The assembly of a ceiling-type chandelier made of wood in this case will proceed according to the following scheme:

choose the branch that you like best with its curves;
we clean its surface from excess bark, lichens and moss;
then dry the driftwood well and sand it using sandpaper;
choose the light bulbs that best match the stick you have chosen. Use only energy-saving and low-heat light bulbs;
to lay the wires, we make shallow cuts into which they will later be placed;
in case of failure, all unnecessary cuts can be easily disguised with putty;
Light bulbs should be placed on the edges of such driftwood. At the same time, they can be placed in lampshades or simply fall from the branches. Both options will be quite original.

End result

Here you can use a wide variety of decorative elements: beads on a string, glass beads from an old chandelier, soft toys and other materials. Thanks to this, your craft will become unique, unusual and inimitable.
You can hang such a chandelier using screws or chains. In the first case, you will receive a ceiling model, in the second - a suspended one.

Other options

Country style

Another popular option is to assemble a lamp in a country style. For this you will need boards irregular shape. They should be processed using the brushing technique and covered with stain. We install lampshades along the edges of the boards and, in fact, that’s it - the chandelier is ready.

In addition to driftwood and boards, you can use any household items containing wooden elements. For example, an old wooden wheel would be an excellent option. small size. We process it by analogy with other chandelier options:

first we clean it from dirt;
then process with sandpaper;
apply stain.

After these manipulations inside wheels, we run the wires, securing them with clamps. This will make them invisible. Next, we either make holes for the cartridges, or hang them at a short distance from each other.

Wheel chandelier

For ceiling mount such lighting fixture We use a powerful fastening system. This is due to the fact that the lamp will be quite large and weighty. Therefore, it would be best to place the chandelier on chains.
As you can see, almost any wooden object can be used to create a ceiling lighting fixture on your own. It could even be half a wheel, various old ones wooden lamps, hand carved from wood or other crafts. That’s why such lamps are good if you want to move away from ordinary lamps and get something original and unique. For recent years handmade style has become very popular. One of its main advantages, along with uniqueness, is the complete environmental friendliness of the manufactured products. And a chandelier made of wood in this case is the best confirmation.
Making a ceiling-type chandelier from wood with your own hands is quite possible, using a wide variety of materials. Don't forget to treat the wood with special protective equipment, and in everything else, just make your desires and fantasies come true. Be consistent and you are guaranteed an excellent result at the end of the job!