Solid fuel boilers are actively used for heating residential buildings. They make it possible to do without a gas main and expensive electricity, releasing thermal energy from wood burning in the combustion chamber. Fuel briquettes are often used for kindling. A typical example of this is Pini-Kay briquettes. They are characterized high level calorific value and provide living spaces with a large amount of heat.

Disadvantages of traditional solid fuel

Pini Kay fuel briquettes were developed in Germany, but today they are supplied by many manufacturers. They are nothing more than compressed wood waste. This fuel comes in the form of neat bars with an internal hole. In this form, it is sent to the furnaces of solid fuel boilers and wood stoves.

Traditional firewood has a number of disadvantages. First, let's note their imperfect shape - this creates problems in storing fuel. Individual bars differ in size from other bars, some of them contain knots, which prevents them from being stacked neatly. Thus, when using firewood in a boiler or stove, you need to take care of purchasing neat logs - they usually cost more.

We also note the low calorific value of wood - this indicator depends on both the type of wood and the level of humidity. And the higher the humidity level, the worse the firewood burns and less quantity generated heat. The approximate calorific value at a humidity of about 10-15% is 3800-4000 kcal. In the case of Pin-Kay briquettes, this figure is much higher.

What are Pini-Kay briquettes?

Briquettes are supplied on pallets; any material can be used for storage. suitable place– neat rectangular shape does not create problems when storing fuel.

Wood briquettes Pini-Kay are a processed product wood waste. Dust and shavings are used here. They're huddled under high pressure, turning into small logs with a hole in the middle. This hole is necessary to improve the combustion of Pini-Kay in the bowels of boilers and furnaces.

In their structure, Pini-Kay wood briquettes resemble enlarged pencil stubs - as if the lead had been taken out of them. This form was not created by chance; it facilitates the ignition of fuel and its further active combustion.

Let's present other advantages of Pini-Kay in the form of a list:

• Excellent characteristics - judge for yourself, the calorific value reaches 5000-5200 kcal, which is 20-25% higher than that of ordinary wood.
• Environmentally friendly – ​​briquettes are not used in the production adhesive bases and chemical additives.
• Almost complete combustion - Pini Kay fuel briquettes produce a minimal amount of ash. It should also be noted that the amount of resins released is minimal, which reduces the frequency of cleaning stoves, fireplaces and boilers.
• Even burning - Pini-Kay briquettes do not “shoot”, do not scatter burning coals, and provide a uniform flame.
• Possibility of processing - if necessary, briquetted fuel can be sawed (if it does not fit into the firebox).

Internal humidity is about 4%.

There are also disadvantages:

• For preliminary ignition, you will need some firewood - Euro firewood (aka Pini-Kay briquettes) can be lit well only if you have kindling.
• When storing Euro firewood, you need to pay attention to the humidity level - it is recommended to store them in a heated room (placing them outside is not allowed).
• More high cost compared to traditional firewood - it all depends on the manufacturer of fuel briquettes Pini-Kay and pricing policy manufacturer.

Nevertheless, this fuel is popular among consumers.

How to make and where to buy Pini-Kay briquettes

We have already said that the basis for this fuel is environmentally friendly wood waste. Sunflower and rice husks, straw, herbaceous perennial called tyrsa and many other components.

The production of Pini-Kay briquettes is carried out by compressing the feedstock under high pressure and high temperature. As a result, all plant and wood components are combined into small logs. The connecting link here is not glue, but lignin - natural natural component contained in vegetation. It is released from plant cells when heated and exposed to pressure.

You can purchase Pini-Kay briquettes from specialized suppliers. The price of one package of wood products ranges from 80-90 rubles (package weight is approximately 10-11 kg). Briquettes made from sunflower husks and other plant components are 15-20% cheaper. We recommend finding a regional supplier of briquetted fuel.

Owner reviews

Briquettes made from pressed wood or plant waste Pini-Kay are a relative novelty. Therefore, domestic consumers treat them with some mistrust. And this is quite understandable, because heating a home is a serious task that can lead to increased costs. Let's see what reviews say about Pini-Kay briquettes.

I bought a plot of land in the Leningrad region, there is no gas, my neighbors heat their houses with electricity. As it turned out, many simply steal it, underestimating the readings in one way or another. I decided not to indulge this lawlessness and installed a solid fuel boiler. The first year I was fiddling with firewood, I ended up breaking my back and had to undergo treatment for a long time. I accidentally came across Pini-Kay briquettes on the Internet and decided to try it. They cost more, but the heat transfer from them is also higher - the boiler is already humming during operation. They provide disproportionately more heat than ordinary logs. Yes, and it’s convenient to store - I bought several pallets and placed them in the one adjacent to the house. utility room, away from dampness.

– Pini Kay Eurofirewood does not need to be dried and cooked, it does not require special ovens and equipment. Piny&Key briquettes are hard and extremely resistant to mechanical stress.

High calorific value

The calorific value of Pini Kay fuel briquettes is 4900-5100 kcal/kg, which significantly exceeds not only the calorific value of conventional firewood, but also that of RUF fuel briquettes. More heat with less wood;

Long burning time

The burning time and subsequent smoldering is higher than that of “ordinary” firewood. The burning time of wood briquettes is up to 3 hours (in ovens with controlled air supply). The high burning time increases the time interval between adding fuel to the stove, which significantly increases ease of use. Comfortable temperature with less fuel.

Easy ignition

Ignition of fuel briquettes is no different from ignition of ordinary firewood. However, Eurowood can be ignited using special liquids (for example, those used for ignition charcoal) or lighter gel. Due to low humidity, briquettes flare up quickly. Pini Kay fuel briquettes provide easy ignition and quick heating of the room;

High density

– Of all types of fuel briquettes, Pini Kay has the highest density

Safety

Combustion of fuel briquettes in contrast to classic firewood various breeds wood, is accompanied by the release of a minimal amount of smoke, does not spark or “shoot”. High safety with high calorific value.

Purity

Due to low humidity, briquettes emit less soot and pollute the chimney less. The ash content of Pini Kay fuel briquettes is about 0.3%

Convenient storage

Due to their even proportions and high density, fuel briquettes can be stored in several rows, which allows you to store significantly more fuel per unit area compared to conventional firewood. Wood fuel briquettes are easy to store and transport

Pini Kay briquettes are fuel that is obtained by processing wood waste. They are made from wood waste, coal, plant waste, and peat. It can be used for solid fuel boilers, stoves, fireplaces. It differs in its combustion duration and is the main alternative to traditional types of fuel.

Pini Kay is characterized by high calorific value and slow smoldering. Briquettes light up quickly and are not afraid of moisture. Combustion is not accompanied by sparks or smoke. There is practically no ash left behind, and the chimney remains clean. The price is reasonable, but the main thing is that it is absolutely environmentally friendly fuel.

Fuel briquettes are solid fuel, which is made from natural raw materials of wood origin. Mainly from sawdust, dust, tyrsa, which is pressed under very high pressure. Eurofirewood is formed using the natural substance lignin, which is found in any vegetation.
Pini kay fuel briquettes are also made from sawdust, but they are fired at the end to protect them from a moisture-resistant environment. That is why briquettes are stored much longer and are not afraid of rooms with high humidity. Basically, people are used to heating their homes with wood or coal. If we compare piney key fuel briquettes for heating and traditional fuel, then it loses significantly compared to the briquettes:
— European firewood burns much longer than regular firewood. For a briquette to burn completely, it needs 2 times more time, so this method of heating a house is economical;
— less than 1% of the weight of the briquettes contains ash, which cannot be said about coal or firewood. If you use them for heating, you need to clean the stove often. Euro briquettes can be cleaned once a season. During this time, a certain percentage of ash accumulates - it can be used as a natural soil fertilizer; — Euro-firewood releases a couple of times more thermal energy;
— during the combustion process, the briquette constantly releases heat. In the case of firewood, it gradually decreases;
— if you heat the stove with the usual wood, soot, smoke and sparks are released. You won’t see this with Euro-firewood - they have an even flame with a woody smell, not smoke;
— briquettes can be stored in any room - they are well packed in polyethylene and are not afraid of moisture. Firewood needs to be allocated a special dry place, otherwise if it is damp, it will not burn.
Obviously, for heating a country or private house it is better to choose alternative fuel. The price of pini-key fuel briquettes will be slightly higher than the cost of ordinary firewood, but in terms of efficiency and economy, briquettes are much better than both ordinary firewood and coal.
The price of European piney kay firewood differs in cost, since it all depends on the quality of the fuel. There are European firewood of the highest and average quality. High-quality European firewood is denser, burns longer, and accordingly produces more heat. Briquettes of average quality burn faster, emit less thermal energy, but the price is much lower.
Different fuel prices are explained by different production costs. By carefully pressing the raw materials, you can get a higher quality product. With this approach, equipment quickly becomes unusable - this factor is taken into account when pricing.
It is best to buy European Pini Key firewood in bulk and high quality. Although they will cost more, such fuel is cost-effective compared to conventional briquettes and firewood. You need to put fewer briquettes into the stove than firewood, and you can get much more heat transfer. All European firewood Moscow Pine Key is mostly of high quality. To be sure of this, it is better to purchase directly from the manufacturer.

Eurofirewood pini key from sawdust are made in the shape of an irregular polyhedron with a hole in the center. To make briquettes, pressing and burning of the surface are used (that’s why it is hard and black). This production method gives Eurowood high strength and resistance to moisture. They can be stored outside and there is no fear that they will become damp or rot.

For today buy fuel briquettes pini kay possible by affordable price. Compared to conventional firewood, they have a higher calorific value. Due to the cylindrical hole inside, the briquettes burn beautifully, so they are great for fireplaces.

We have best price for fuel briquettes pini kay . Compared to traditional fuel, the prices are almost the same, but the alternative fuel - European firewood - is much better. Heat transfer is much higher and briquettes need to be placed in the firebox much more quickly than coal or firewood.

Fuel briquettes and pini kay eurowood for heating are capable of holding a high flame more than an hour and during combustion the temperature remains the same, and this is at least 4 hours. Coal after burnt briquettes can be used for barbecuing - they give good heat. Also, fuel briquettes do not contain impurities, glue or other toxic substances. When burning in the house, you can smell a woody smell.

Pini Kay fuel briquettes today are very often used to start a fire in a fireplace, stove and for heating wood-burning heating boilers. They are also good for country house, and for the bath, and for the barbecue, and even for the fire. When burning, briquettes do not produce sparks, practically do not crack, do not “shoot”, and almost do not smoke at all. Unlike ordinary firewood, pini kay does not need to be dried; it flares up quickly. It is very important that Eurowood does not contain any chemical additives or glue. They obtain their shape using the pressure of a screw press, which releases the natural adhesive lignin from the sawdust. Thanks to this manufacturing technology, the density of briquettes reaches 1.4 kg/dm 3. During the combustion of this type of fuel, you will not feel any pungent foreign odors; the surrounding air is not filled with harmful chemical compounds.

Pini kay are a solid polygonal cylinder with through hole in the center. This creates additional air draft through the briquette, which helps to easily and quickly light a fire and maintain it even when the draft in the oven is not very strong.

This type of fuel is made from dry sawdust, which is compressed under high pressure and at the end lightly burned on the outside. The result is logs of very high density. Polyethylene packaging - 12 cylinders each, as well as the hardness of the briquettes allow you to simply store them under a canopy outside for the whole winter. They are also very convenient to stack for storage or transportation. Due to the fact that the briquettes are packaged, there is no debris from them at all, unlike firewood.

Piny Kay is one of the densest (denser than Ruf) modern fuel briquettes. That's why they have the most long burning, which is very convenient - you don’t have to throw them into the oven often. The ash content of pini kay is very low, which allows you to clean the chimney less often compared to conventional firewood.

Buying piney kay eurowood means that your heating costs will be significantly reduced!

An excellent replacement for fossil fuels: coal, gas, fuel oil, etc.

The name comes from a company from Austria that produced presses for making briquettes.

Our pini kay price in Moscow is one of the lowest!

Fuel briquettes Pini Kay
Pini Key briquettes are made from coniferous or birch wood.

Pini Kay briquettes comply with European standards, these briquettes are often called Eurofirewood, or Eurobriquettes.
The production of Pini Key fuel briquettes (euro firewood) is based on the principle of screw pressing. Pini Kay wood briquettes (euro firewood) are produced on mechanical (screw) presses, through a combination high pressure and thermal (firing) treatment. Dry crushed wood, heated in a special chamber to a temperature of 170-220 degrees, is fed, or rather, pushed, simultaneously pressed, into an extruder, at the output of which a fuel briquette is obtained. Fuel briquettes of the “Pini&Kay” standard “Pini Kay” have the shape of an irregular polyhedron or cylindrical shape, with a hole inside along the entire length. The hole gives additional traction inside the briquette, thanks to it the briquettes burn without forced ventilation and they can be successfully used in low draft fireboxes. In addition, thermal conductivity (heat) increases significantly.
Fuel briquettes Pini Kay "Pini Kay" - European firewood, the most high-tech type of fuel briquettes. The best solid fuel for almost all types of stoves and fireplaces. Pini&Key briquettes (eurowood) are ideal for pyrolysis boilers, increasing their power and heat output several times.
Advantages of Pini Kay Eurowood:
Piny&Key fuel briquettes are very hard and extremely resistant to mechanical stress. Due to their high density, Pini Kay fuel briquettes are well stored in atmospheric humidity conditions in the open air.
Pini Kay wood briquettes (euro firewood) have maximum burning time and combustion heat - they give the most even and long-lasting heat.
Pini Kay fuel briquettes are manufactured using German equipment. Their quality complies with the DIN standard.

Characteristics of fuel briquettes (eurowood) of the Pini Kay standard:
Briquette length – 240-270 mm, diameter – 60-80 mm. The surface is glossy. Humidity 4-5%. Heat of combustion – 5200-5300 kcal/kg. Ash content – ​​no more than 0.1%.
Wood briquettes Pini Kay - euro firewood, sale, packaging.
Packs of 5-10 kg, packed in shrink film (each containing 6-12 briquettes). The packs are placed on a Euro pallet. Pallet weight 1 ton. Price list (open)

Consumption of European firewood and wood briquettes per year. 160 kg of wood briquettes (euro firewood) are equal in heat transfer to 1 m3 of dry birch firewood. If you want to roughly calculate the number of wood briquettes you need for a year ( heating season) , open: "Heating costs"

Euro firewood, fuel briquettes, sale, Moscow:
Wood briquettes from sawdust, buy Euro firewood, sale of fuel briquettes, sale of Euro firewood, Moscow

Wood fuel briquettes (euro firewood) are the true fuel of the future! It is worth buying sawdust fuel briquettes only once and you will forever remain a fan of this fuel. You can buy fuel briquettes from us (sawdust briquettes, euro firewood, briquettes for heating) best quality and according to low prices! It is possible to sell Euro firewood with delivery throughout Moscow, the Moscow region and to the regions.