Plant against mold. Mold and white coating in flower pots on the ground. How to get rid

Many gardeners, both beginners and experienced ones, are faced with the problem of mold in flower pots. Where does it come from and how can you get rid of it without harming your indoor plant? We'll talk about this in detail later in the article.

The appearance of mold in a pot says about the presence of fungal spores in the soil. There are many reasons for its development.

Plaque itself can appear for a number of reasons.

Therefore, let’s look at the most common reasons why the soil can “bloom” and become covered with plaque.

If in the room air temperature is very low, and even increased humidity, fungal spores actively begin to germinate in the ground. This is the environment that is favorable for them.
Plaque may appear from stagnation of water in the pot. Therefore, do not forget about drainage holes when planting. If you already have them, but the fungus still appears, it means you have poor drainage or the holes are very clogged.
Fungal diseases can be caused by too frequent or abundant watering.
Most often mold can appear on acidic and heavy soils.

Happens different types, therefore the control measures will be different.

It is worth noting that such a coating can appear on soils of any variety, from a banal cactus to a beautiful orchid. The main thing is to see it in time and take measures so that it does not cause harm.

Fungal spores don't matter how expensive or rare your pet is.

Types of mold: white, efflorescence

On the surface of the soil in a flower pot there are most often two types of fungi:

white– very similar to fluff and easy to rub in your hands;
efflorescence– such a crystalline coating can be white, gray or green.

Efflorescence is more dangerous, since this coating develops not only on the surface of the soil, but can also affect the interior of the soil.

How can it harm the plant?

Besides that white coating spoils the aesthetic appearance of the soil and infects it with fungal spores; it also affects the plant itself.

If you do not fight, the pot dweller may die.

White deposits on the soil surface can lead to to the following consequences:

the flower will stop developing;
access to oxygen will decrease and the roots will no longer receive nutrients;
the acidity of the soil will be disrupted and the mineral composition of the soil will change;
pets can get sick with fungal diseases and perish;
Most often, the plant begins to shed its leaves due to a lack of nutrients in the soil.

As you can see, a seemingly harmless white coating can lead to death. Therefore, you should not let the situation get worse and immediately start fighting mold on the soil surface.

How to remove mold from flowers

So, the soil is covered with a white coating. What to do?

The first step is to determine causes of mold, and only then start fighting it.

To clean a flower pot, you should follow these steps:

Monitor the temperature in the room. It is important that the humidity is moderate. IN winter period additional lighting needs to be installed.
The top layer of soil should be carefully removed. This will help prevent fungus from penetrating into the soil.
The removed layer of soil is necessary replace with a special bactericidal substrate, which is enriched with nutrients. If you don’t find one in the store, you can replace it with peat or charcoal. Experienced flower growers It is also recommended to use activated carbon.
To kill all fungal spores that are in the soil, you should treat the soil with a solution of Fundazol (2 g of the drug per 1 liter of water).
Regularly loosen the soil to saturate it with oxygen.
If the soil is very strongly affected by the fungus, it is best to transplant the plant into a new substrate, which previously need to treat with fungicide.

We provided detailed use of one of the fungicides in the article.

These control methods are the most effective and will help you save the plant from death.

Prevention of soil against white plaque

To prevent the appearance of white plaque in flowerpots, you should carry out preventive measures and monitor the condition of both the soil and the plant itself.

Prevent mold simple rules will help:

water only with warm filtered water in moderate quantities;
monitor the drainage holes in the pot so that they do not become clogged;
stick to temperature regime in the room, monitor the air humidity;
regularly loosen the soil;
As a preventative measure, you can periodically water it with the solution. citric acid;
For disinfection, use activated carbon once a month.

Each plant is individual. Therefore, this should be taken into account when using one or another method of control.

As you can see, mold appearance on the soil surface very dangerous and can lead to his death. Therefore, to prevent this from happening, you need to constantly monitor the condition of the plant and carry out regular preventive maintenance.

Quite often in flower pots White mold appears on the ground, although its color may vary. As a rule, it appears either under the influence external factors, or due to improper care of indoor plants. A white coating appears first at the border of contact between the soil and the pot, and then quite quickly fills the entire space.

This may occur due to the fact that there are fungal spores in the air, which, under certain conditions, begin to multiply rapidly, growing into entire colonies. This is dangerous not only for the plants themselves, but also for the people living in the apartment.

There are many types of mold. It can be white, brown, green and even black.

Black mold

Black mold can appear due to excess moisture in pots. May vary in different shades. It is considered the most dangerous species, so when it appears, immediate measures should be taken to get rid of it. The spores of this mold cause allergies and lead to problems normal operation lungs.

White mold

This is the most common type of mold and most often appears on the soil in flower pots. When appearing in a pot, mold stains resemble salt stains, but differ in their structure. While salt stains have a crystalline structure, mold has a soft consistency that can be easily rubbed with your fingers.

Efflorescence

As a result chemical reactions, stains may form on the ground surface different shades, which have nothing to do with mold and are called efflorescence. Efflorescences have Negative influence on all layers of soil if they penetrate deep into the soil.

When the first signs of mold growth appear, which may be accompanied by a specific odor, you need to pay attention to the plant watering schedule. It is possible that the watering schedule is not suitable for this type of plant and the volume of liquid needs to be reduced. As a rule, many plants do not need frequent watering.

If the plant requires abundant watering, then it must be alternated with loosening the soil so that it can breathe, but this must be done very carefully so as not to harm the root system.

Methods for getting rid of mold in pots:

If the appearance of mold is noticed, then you need to remove the top layer of soil as soon as possible, before the fungus begins to penetrate deep into the soil. If it gets to the root system, the plant will quickly die.
After this, the lower layers of the soil are moistened with the addition of citric acid, which stops the proliferation of the fungus and has a beneficial effect on flower growth.
Then, instead of the removed top ball of soil, a new ball is poured, with the addition of antibactericidal drugs. As an additive, it is permissible to use small sphagnum and pieces charcoal.
Finally, the soil in the pot is watered with the addition of foundationazole: 2 grams of this substance dissolves in 1 liter of water. If the infection has managed to infect the plant itself, then it is treated with the same solution.

So that the soil does not stagnate and can breathe, it is necessary to loosen it regularly. upper layer. This leads to an even distribution of moisture throughout the entire volume of the pot.

If the soil in the pot begins to become covered with white mold, then the flower should be watered with a solution of water and citric acid at least 2 times a month. To prepare the solution, you need to take 1 glass of water and half a teaspoon of citric acid, then stir everything until the acid is completely dissolved.

Most effective option getting rid of mold in a flower pot means completely replacing all the soil and replanting the flower in new pot. At the same time, landing must be carried out in accordance with all the rules. In addition, it would not hurt to study the rules for caring for the affected plant so that the situation does not repeat itself.

To get rid of the fungus, as well as the special smell, it is necessary to treat the soil using the following technology:

The contaminated soil is separated from the root system.
The soil from the pot is removed into another container.
The water is placed on the fire and brought to a boil.
After this, the soil is watered with boiling water.
The soil is poured onto a baking sheet and placed in the oven.
Wait until the ground cools down.
The pot is treated with a disinfectant composition.
The soil is poured into a pot, after which a flower is planted here.

The most effective chemicals are those sold in flower shops. In this case, you need to take into account:

Character of the plant.
Type of plant.
The degree of fungal damage.
What types of fertilizers are used to feed plants.

The wrong choice of chemical can have the opposite effect, as in some cases the use of chemicals is inappropriate.

If you opt for organic preparations, they make the soil unfavorable for the development of mold.

Mold is considered quite dangerous for the plant, therefore, it should not be allowed to actively fill the space in the pot, and here’s why:

The plant is sick because mold is blocking access nutrients to stems, leaves and flowers.
The access to oxygen to the root system is also blocked.
Mold can cause various diseases.
Since soil moisture is higher than normal, the roots of the plant may simply rot.

If you postpone the fight against the fungus for an indefinite time, the flower will simply die.

There are several reasons why mold appears in flower pots. For example:

Incorrect watering of plants, which causes liquid to stagnate in the pot.
In conditions of low temperatures and high air humidity.
Watering the plants with cold water.
There is no drainage system in the pot, so the liquid waterlogs the soil.
Application of contaminated soil.

As a rule, than more humidity and there is no air movement, then these are conditions for the rapid proliferation of mold. Mold most often appears either in spring or autumn.

This is due to the fact that the average daily temperature does not allow moisture to evaporate quickly, so there is an excess of moisture in the pots of houseplants. And these are conditions for the rapid proliferation of fungal spores.

In addition, increased dampness in the house also contributes to the appearance of mold in flower pots and more. In damp apartment when the ventilation system is not functioning well and in hard to reach places The air stagnates and mold may appear here. To all other, big role the fact of the placement of the apartment plays a role: if there is a basement, where it is observed high humidity, then this will definitely affect the microclimate of the apartment.

The appearance of mold in pots where houseplants are grown can be considered an emergency and a signal that all measures must be taken to prevent the fungus from spreading further. To prevent this from happening, it is better to think about this in advance. For example:

From time to time, loosen the top ball of soil so that it breathes and there is no stagnation of moisture and air.
When planting plants, take care of a normal drainage system.
Grow indoor plants in special pots equipped with holes in the bottom.
Fertilize with wood ash or activated carbon. Don't forget about other actions that can reduce the likelihood of mold growing in flower pots.

For example, you can treat the soil with potassium permanganate at least once a month. In this case, you should prepare a weak solution that will not harm the plants.

Garlic, which needs to be cut into several pieces and placed next to the stem, is considered to be a fairly effective remedy against fungus. This is done before watering, and when the top ball of soil dries, the garlic is removed. It can be used in a rotation of once a week. If mold appears, apply garlic every two days.

If you monitor the condition of the soil in pots and regularly carry out preventive measures, you can get rid of such a problem as mold, and not only in flower pots. It is always important to remember that it is better to spend some time preventing mold from appearing than to put in the effort to fight it later. When the plant is properly cared for and quality soil is purchased for planting, the likelihood of infection is zero. Therefore, you need to monitor humidity, regular ventilation and sufficient lighting. At the same time, you need to make sure that the plants are not in a draft.

When plants are kept in the house, it is necessary to constantly monitor the microclimate, avoiding excess moisture.

Some tips from experienced amateur gardeners can help in the fight against mold:

Buy soil only from trusted retail outlets.
It is imperative to familiarize yourself with its composition.
You should not buy heavy substrates, since the fungus spreads much faster in them than in light soils.
Before planting the plant, it is necessary to disinfect the soil with the same potassium permanganate, which will reduce the likelihood of fungus appearing.

Content indoor plants requires a special approach to their cultivation, since this is connected with the rules of cultivation and care, which cannot be violated or simply ignored, organizing care at your own discretion. This approach can lead to unpredictable results, which may be associated with the appearance of mold. If you ignore this fact, then soon only memories will be left of your home flowers. The fact is that mold damage to a flower often leads to its death if you do not try to solve the problem at an early stage.

Many owners who grow indoor plants are faced with the formation of fungus in the soil. If there are favorable conditions mold develops on seeds, soil, flowers and leaves, then it begins to spread throughout the house. Since pathogenic microflora can have a negative effect on plants and the human body, you need to immediately take advantage of effective means to get rid of it.

Mold on soil can appear for many reasons. Most often, owners find a white variety of fungus in flower pots or boxes.

White mold appears on the surface of the soil if the room is cool enough. For example, you could often see such microflora appearing in basements or cellars, where it is cold and damp. The development of the colony begins after the spores fall into the ground or onto the plant itself. It is necessary that the premises be constantly maintained high level air humidity is the main condition for the active growth of a fungal colony.

The cause may be accumulation or stagnation of water in the flowerpot. Small drainage system in the pot can lead to blockage of the holes, and excess moisture will remain at the root system of the plant.

Common reasons include improper watering of indoor flowers or the characteristics of the substrate. Possibility of appearing in the ground white fungus higher if the soil is quite acidic or has a lot of heavy substances in its composition. White mold can appear regardless of the type of houseplant.

For the same reasons, mold may appear on the surface of the soil in vegetable gardens and orchards.

Video “Reasons for appearance”

From the video you will learn why mold appears on the ground.

Negative effects on seedlings

Mold can appear in your home when there are fungal spores present. When it enters the active growth phase, it begins to harm plants. For young seedlings, the formation of mold on the surface is very dangerous. After some time it begins to rot. This pathogenic microflora is capable of absorbing a lot of moisture, depriving flowers of juice. Fungal infection reduces the plant's oxygen supply and impairs regeneration.

As a result, plants may die.

Effective methods of control

If the owners notice that the ground is moldy, then they need to know what to do in such a situation. There are many different ways and methods for destroying pathogenic microflora, but their effectiveness will be influenced by various factors.

First, you need to replace the contaminated soil with new greenhouse soil. After this, you need to thoroughly loosen it so that air can easily penetrate into the lower layers of the soil. The frequency of watering is reduced, and a small layer of quartz sand is poured onto the surface of the earth.

The removed fungus and old soil must be taken outside the apartment or garden (greenhouse).

Owners should remember that drying the soil does not guarantee absolute results in getting rid of the fungus. Once mold has appeared, it is not easy to destroy. Drying may give a little time, since during this period the colony of microflora will stop spreading.

The application of carbon fertilizers – charcoal – can have a certain positive effect. If you grind this coal into dust and sprinkle it on a plant, it will be able to absorb excess moisture, stopping the growth of mold.

Activated carbon is used to combat yellow mold in flower pots. To do this, even in the process of planting the plant, pieces of sphagnum moss and several tablets of ground activated or charcoal are added to the ground. They can also be added to the soil with which you will replace the top layer. When along with the appearance of mold on the ground indoor flowers begin to fade, you should use Fundazol.

How to remove mold in a flower pot or vegetable garden so that it no longer appears on seedlings? The emerging fungus must be treated with special chemicals targeted antiseptic and antibacterial action.

It is possible to effectively get rid of a fungal infection with the help of the following drugs: “HOM”, “Oksikhom”, “Fitosporin-M”, “Fundazol”. These products are dissolved in water, following the dosage specified by the manufacturer. The solution is poured onto the beds in which mold development is observed. After watering with medicinal preparations, the soil must be loosened, allowing it to dry faster.

When preparing seedlings in greenhouses, you need to make sure that good, clean soil is used for growing. The room must be ventilated periodically. It is advisable to provide solar lighting seedlings, since this measure prevents the formation of fungal colonies of any kind. To prevent the soil in the flower from becoming moldy, it is recommended to use a solution for watering instead of plain water once every two weeks. lemon juice or acid. Either a pinch of citric acid or a teaspoon of juice is diluted in a glass of water.

If mold appears in the garden on the bark of trees or shrubs, you can cover it with a limestone solution. Not only the source of the fungus is covered, but also the adjacent area so that it does not become infected after treatment.

Video “How to fight”

From the video you will learn how to deal with such an unpleasant phenomenon as mold.

Indoor plants have already become an integral attribute of the interior of any room. But, it is important to understand that these are living organisms, and they, unlike paintings or sculptures, sometimes become infected with diseases. Very often, indoor plants are affected by fungus. The source of infection is the same mold that accumulates on the walls of the pot. At first glance, it may seem harmless, but in fact, the fungus poses a great danger to plants.

Where does mold on flowers come from?

Anyone who has anything to do with indoor plants has had to deal with a white or yellowish coating on the walls of the pot. It is this plaque that is the initial stage of mold development.

The most vulnerable to fungal diseases are plants that are not very demanding when it comes to watering and that cannot absorb a large amount of liquid at once. Among such plants, we highlight cacti, succulents, violets and others.

There are not so many varieties of fungi that are dangerous to plants.

Types of mold:

White mold is exactly that white coating that collects on the walls of the pot. Over time, it becomes more and more voluminous, and in the later stages of development it resembles a fluffy blanket. Often, white mold is confused with mineral deposits, but the fungus feels softer and thinner to the touch.
Blue mold - bluish fungal microorganisms prefer wood, so they pose the greatest danger to indoor trees, wooden flower pots and flowerpots.
Black mold– most dangerous look, which poses a threat not only to plants, but also to people. Black fungus is difficult to notice on the soil, but mold accumulated on the walls of the pot immediately catches the eye. Black mold closely resembles soil and this often leads to confusion. But, unlike soil, mold is very difficult to wash off - even after treatment with a strong detergent There will definitely be ingrained traces of fungus on the surface.

It is worth noting that all types of mold belong to the same family, so the reasons for its appearance in each case are approximately the same:

Contaminated soil is the most common cause, but at the same time, the most common. Often, purchased substrate is already contaminated with fungal microorganisms. A similar situation may occur with the soil that you dug up near your house. Therefore, it is best to purchase mold-resistant substrate and only from certified manufacturers;
High intensity of watering - some types of plantings are not able to immediately absorb a large amount of liquid, and frequent watering creates discomfort for them. Plants do not have time to absorb all the moisture, and they lower leaves, as well as the stem begin to rot, which leads to the appearance of mold;
Increased air humidity - if you have streamlined the watering regime, but the plants still rot, pay attention to the air humidity indicator. High humidity conditions are well suited for tropical plantings, but for most of our species they are far from optimal. Excessively humid air leads to withering of plants and the appearance of fungal microorganisms.
Poor drainage – often the appearance of fungus is associated with poor pot layout. Any container in which a flower grows must have a drainage hole and a tray to drain excess water. Experienced gardeners It is recommended to create a drainage layer of expanded clay or pebbles at the bottom of the pot. It is very important that the soil has a structure suitable for the plant. Therefore, it is better to buy a ready-made substrate intended for a specific type of planting. Experts recommend minimizing the use of clay soil, as it strongly retains liquid, which often leads to mold.

Danger of mold

It's no secret that human fungal diseases are very difficult to treat. The situation is similar with diseases of domestic plants. Mold growth leads to:

Deterioration of the soil - the quality of the substrate infected with the fungus noticeably decreases. Fungal microorganisms disrupt water and mineral metabolism, and also change chemical composition soil that becomes unsuitable for growing crops.
Plant death - mold, in the later stages of development, becomes covered with a crust that retains water and does not allow air to pass through. The roots of the plant do not receive the necessary substances, and they are constantly in water. And that's why they start to rot. Immediately after the rotting process begins to spread to the stem and leaves, the plant dies.
Infection of the premises - this is especially true for black mold. Fungal microorganisms can spread to the windowsill, walls and ceiling. Black mold is very dangerous, especially if children, old people or people with allergies live in the room.

How to fight fungus?

So, we found out that fungal microorganisms can harm not only plants, but also people. Now the next question arises - how to deal with them? The first thing to do is repot the plant in a new pot and replace the soil. It is better to throw away the old substrate and rinse the pot thoroughly with boiling water.

If you do not have enough new soil, you can replace only the top layer of substrate. In particularly severe cases, you can use one of the methods presented below.

Chemicals

The best way to kill mold in a pot is to treat it with fungicides. Experts divide all these drugs into two groups: organic and inorganic. In principle, only the second group of drugs can be called “chemical”, since inorganic agents, unlike organic ones, kill fungal microorganisms using chemical compounds.

One of the most effective drugs is considered "Fundazol". It needs to be dissolved in water - 2 g per 1 liter, and then ready-made mixture spray the leaves of affected plants. “Fundazol” is very toxic, therefore, when working with it, you must use gloves and a respirator.

Almost all mold repellents contain benomyl, a substance that can destroy fungus in the shortest possible time. As an alternative to Fundazol, you can use Ferazim - this drug is easier to purchase and is no less effective.

If we talk about less toxic drugs, then first of all we should note such drugs as Oxychom, Skor and Topsin. They can be used both to destroy fungal microorganisms in a pot and to treat infected plants. Each of these preparations must be diluted in water (the ratio is indicated in the instructions), and only after that the soil and leaves should be treated with the prepared solution. Yes, chemicals They are very effective, but if used incorrectly, you can harm not only the flower, but also yourself. Therefore, it is important to strictly follow all safety rules and follow the instructions indicated on the box.

Now let's talk a little about organic drugs. They contain bacteria whose vital activity is aimed at fighting mold. Most of these drugs not only treat affected plants, but also improve the chemical composition of the soil.

Fitosporin is in greatest demand. This drug contains soil bacteria that destroy the fungus and its spores. "Fitosporin" is presented on the market in the form of powder, paste and solution. The powder and paste must be dissolved in water in a ratio of 1:2. As for the solution, it is already sold ready for use - you just need to water the soil and infected plants. For greater effect, you can add a small amount of liquid soap.

Among other organic products, we highlight “Trichodermin”, “Baktofit” and “Fitolavin”. Most drugs are presented in the form of powder and concentrate, but there are also tablets (for example, Glyocladin). The main advantage of organic products is that they are non-toxic and do not pose any threat to human health.

Folk remedies

Gardeners who do not trust chemistry and believe that it harms plants use traditional methods combating mold. Below are some of them:

Citric acid – stir a few drops of citric acid in water and spray the affected plants with the resulting solution. In the future, it is important to repeat this procedure once a month. Important: experts do not recommend treating highly acidic soil with citric acid.
Garlic is an effective “grandmother’s” method, which involves dropping cut garlic cloves around the perimeter of the pot. The garlic may begin to rot. It is important to monitor this and replace it with new cloves, otherwise another serious source of mold may form.
Coal - the advantage of this product is that it is always at hand and is not difficult to get. You can purchase activated carbon at any nearest pharmacy. We crush the tablets and mix them with the substrate. Many gardeners use charcoal. You can buy it at a hardware store or just scoop it out of the oven. It can also be mixed with the substrate, but it is better to simply cover the soil with a small layer. For greater effect, experts advise combining coal with river sand.

Prevention

Experienced gardeners say that it is easier to prevent mold from occurring than to get rid of it later. Below are some of the most effective recommendations to combat fungus:

Soil – it is important to constantly monitor the quality of the soil. To prevent the appearance of fungus, experts advise using a purchased substrate: firstly, it is tested for the presence of fungal microorganisms; secondly, in the store you can purchase soil for a specific type of plant. For additional protection of the soil, it can be covered with gravel or expanded clay.
Pot - it is better to give preference to ceramic products. Their main advantage is their porous structure, which creates the necessary conditions for normal ventilation. Experienced gardeners recommend minimizing the use of plastic and metal pots.
Drainage – only high-quality drainage can prevent the formation of stagnant water. Drainage material can be purchased at specialized hardware stores. Alternatively, you can use pieces of brick or gravel. It is important to regularly loosen the soil to prevent the formation of a hard crust and to improve the circulation of moisture in the soil.
Watering - you need to know which watering regime is suitable for a particular plant, and strictly follow it. Some varieties of flowers do not tolerate excess moisture and may begin to rot.
Disinfection - before using the substrate, it must be disinfected through treatment high temperatures. There are several processing options: you can calcine the soil on a baking sheet in the oven or steam it over boiling water. Some gardeners additionally water the soil with a weak solution of potassium permanganate, and immediately before using the substrate, add activated carbon to it.
Conditions – it is important to create optimal conditions for the plant. First of all, you need to make sure there is enough sunlight, because, as you know, sunlight also kills fungus. No less important conditions are normal humidity and absence of drafts.

Let's sum it up

The appearance of mold on the walls of the pot is an alarming signal, which indicates that some urgent measures need to be taken. After all, ignoring mold can lead to the death of plants. It is important to always remember one rule: it is easier to prevent the appearance of mold than to fight it later.

One of the pretty common problems when growing indoor plants is fungal disease. If mold appears in a flower pot, this is a sign of improper care of the flower. A whitish coating on the surface of the soil sometimes does not cause concern among gardeners, and this moment is precisely the beginning of the development of a fungal disease.

Why does mold appear in a flower pot?

White mold in flower pots is an unpleasant and dangerous phenomenon. Those who like to grow also face the same problem. Both cases have the same source: fungal disease. There are several main reasons why there is mold in a pot:

too much low temperature indoor air (if you have noticed, in damp and cold basements there are almost always similar white deposits);
increased air humidity (moisture is the main condition for successful mold growth);
constant stagnation of water (as a rule, this is facilitated by too small drainage holes in the flowerpot or their periodic blockage);
incorrect watering regime (the pot is often or too abundantly filled with water);
properties of the substrate (if the soil is too acidic or heavy, it is more susceptible to fungal growth).

As you can see, mold can appear in indoor flowers at any time and it doesn’t matter at all what type of indoor plants you choose. So you should clearly know what to do in such a situation, because some flowers are not just a decoration for a room, but also a very expensive pleasure.

How to remove mold from flowers?

The first thing to remember is that mold in a flower pot will not go away if you remove a small lump of earth. It spreads not only in breadth, but also in depth. You will have to completely remove the entire top layer so that the disease does not take hold of the roots.

Most often, flower growers encounter this problem during the off-season, when the temperature drops noticeably and central heating not yet included. Evaporation occurs more slowly and processes of water stagnation and soil decay begin. To prevent mold in a flower pot, constantly loosen the top layer of soil to ensure full breathability.

To prevent the soil in the flower from becoming moldy, it is recommended to use a solution of lemon juice or acid for watering once every two weeks instead of plain water. Either a pinch of citric acid or a teaspoon of juice is diluted in a glass of water. This helps neutralize fungal spores that lie dormant in the soil.

Activated carbon is used to combat yellow mold in flower pots. To do this, even in the process of planting the plant, pieces and several tablets of activated charcoal or pieces of charcoal are added to the ground. They can also be added to the soil with which you will replace the top layer. When, along with the appearance of mold on the ground, indoor flowers begin to fade, foundationazole should be used. This drug has proven itself as a remedy for fungus. They use it to cultivate the soil and the plant itself.

White mold in flower pots: prevention methods

As you know, prevention is always better treatment. To prevent the problem of fungal infection from affecting you, it is enough to follow a few simple rules. If you just notice that the soil in the pots is becoming moldy, immediately treat it with a weak solution of potassium permanganate. This procedure is also carried out for healthy flowers once a month. Well, the simplest and quite reliable way- garlic cloves. Simply cut them into large pieces and bury them as close to the flower as possible, then water the plant. As soon as the soil dries, remove the garlic. This procedure can be carried out during each watering and mold will not appear in the flower pot.