Key Features:

• type: wall-mounted, sectional;
• operating pressure – 16 atm;
• pressure test – 24 atm;
• temperature: 110 °C;
• heat output: 181 W;
• overall dimensions (H/W/D, mm): 582/80/80;
• connection types: top or bottom.

Model description

Radiators of this series are used in central or autonomous heating systems. The uniformity and strength of the paint and varnish coating is achieved by painting using the total immersion followed by spraying with special paint containing polyester.

The devices are available in white color and their service life reaches 30 years. The volume of coolant in 1 section, which can be used as water or antifreeze, is 0.46 liters. The heating area of ​​one section weighing 1.43 kg is 1.8 m². In the manufacture of radiators, high-tech injection molding is used.

Advantages and Disadvantages

Radiators of this series were specially designed for Russian consumers, taking into account all the operating features.

Versatility and quality

With comparatively small sizes they have high heat transfer (several times higher than steel or cast iron products). Intersectional seals are made of silicone, which significantly increases the service life of the connections themselves. Heating devices of this model can be installed in systems with copper, steel, plastic and metal-plastic pipes.

Easy installation and great appearance

Radiators are simple and easy to install. By changing the number of sections, you can easily select the desired length or power and ensure optimal temperature indoors.

With a depth of 80 mm, the radiator can be hung on the wall, installed in a niche or under a window sill, or hidden behind curtains or furniture. The elegant design of the device allows it to fit into any interior as a full-fledged part of the composition.

Cons

The only drawback of these radiators is the possibility of corrosion if low-quality coolant is used.

Global VOX R 500

Country of origin: Italy.

Key Features:

• type: sectional, wall-mounted;
• test pressure – 24 atm;
• temperature: 110 °C;
• heat output of one section: 195 W;
• Coolant pH: 6.5 – 8.5, recommended – 7 – 8;
• internal distance between axles: 500 mm;
• overall dimensions (H/W/D, mm): 590/80/95;
• connection type: side.

Model description

In the manufacture of radiators, the injection molding method is used. The model is used in closed or central heating systems. The quality of the outer coating is achieved by anaphoresis (immersion painting with epoxy primer and subsequent spraying with a special decorative paint). Radiators are available in white.

The guaranteed service life of devices in this series is 10 years. With a weight of 1.53 kg and a volume of 0.46 l, one section is capable of heating 1.8 m² of area. This model uses both water and antifreeze as a coolant.

Advantages and Disadvantages

This series was released for the Russian market and has a number of features that are in particular demand among consumers.

Unpretentiousness and reliability

The development of radiators of this model was carried out taking into account all Russian operational features (various quality of coolant, water hammer in the system, etc.). The letter “R” in the name means reinforcement; such heating devices can easily withstand pressure up to 16 atm inclusive. Radiators are installed in systems with pipes made of various types of material.

Heat dissipation and design

The excellent thermal conductivity of aluminum allows for rapid heating or cooling of the radiator. Easy installation allows you to quickly change the number of sections in the device if necessary. Design and elegant appearance models allow the use of these radiators both in offices and in residential premises with interiors in various styles.

Flaws

When using radiators in rooms with high humidity, you should avoid scratches and chips of the painted surface of heating devices. The formation of aluminum oxide at the site of damage can lead to paint peeling.

Rifar Alum 500

Country of origin: Russia.

Key Features:

• type: sectional, wall-mounted;
• crimping pressure – 35 atm;
• temperature: 135 °C;
• heat output: 183 W;
• distance between axles: 500 mm;
• overall dimensions (H/W/D, mm): 565/80/90;
• connection types: side, bottom.

Model description

These radiators are connected to autonomous and central heating systems in residential and public buildings. The durability and quality of the internal and external coatings is ensured by the anodic electrodeposition method, after which high-quality enamel is powder coated in an electrostatic field, the color of the paint is white.

The manufacturer gives a guaranteed service life of heating devices of this model of at least 20 years. The coolant in the radiator is water; with a weight of one section of 1.45 kg and a volume of 0.27 l, it heats 1.8 m² of area.

Advantages and Disadvantages

There are several advantages that distinguish this model from the line of aluminum radiators.

Ease of maintenance

The technological holes at the bottom of each section are not welded, as in other models, but are closed with a plug with a sealing gasket, which makes draining water and cleaning the radiator much easier. The model is made of light aluminum alloys, which facilitates transportation and installation of radiators.

Cost-effective and reliable

The small volume of coolant in the sections makes this model very economical, but at the same time the heat transfer remains high. The wall thickness (minimum 2.8 mm) and the oval cross-section of the internal vertical channels allow radiators of this series to withstand high pressure in the system, and also increase the speed of the coolant, which reduces the amount of deposits on internal surfaces.

Flaws

Weak resistance to various chemical additives that may be contained in the coolant.

Halsen AL500

Country of origin: Russia (manufactured using German technologies).

Key Features:

• type: sectional, mostly wall-mounted;
• maximum operating pressure – 16 atm;
• operating temperature: 120 °C;
• heat output: 208 W;
• height distance between pipe axes: 500 mm;
• dimensions (H/W/D, mm): 582/80/96;
• connection type: side.

Model description

Radiators are manufactured modern method injection molding, which allows each section to be cast separately, are connected to any heating systems in public and residential buildings. When painting, phosphochrome plating is used, followed by spraying of epoxy polyester enamel.

Heating devices are produced in white color and use water as the coolant. They have a long service life (up to 20 years), 1 section with a volume of 0.43 l and a weight of 1.1 kg heats at least 2 m² of area.

Advantages and Disadvantages

Radiators of this series are manufactured using modern European equipment and have a quality that is not inferior to Western models.

Anti-corrosion resistance and reliability

Thanks to the improved interior finishing, this model is completely free from rust formation inside the channels. Heating devices undergo repeated quality checks, which ensures complete protection of radiators from leaks.

No deficiencies found.

Royal Thermo Revolution 500

Country of origin: Russia (manufactured using high-quality European equipment).

Key Features:

• type: wall-mounted, sectional;
• maximum operating pressure – 20 atm;
• operating temperature: 110 °C;
• heat output: 189 W;
• dimensions (H/W/D, mm): 570/80/80;
• connection type: side.

Model description

Radiators can operate in both individual and central heating systems of public, residential and industrial buildings. The devices undergo six-stage painting with ultra-resistant enamels using Italian equipment, and are produced only in white.

Water and antifreeze are used as a coolant; 1 section weighs 1.2 kg and has a volume of 0.37 l, while being able to heat 1.8 m² of area. The service life reaches 10 years.

Advantages and Disadvantages

The nanotechnologies used in the manufacture of this model made it possible to improve the shape of the fins, which sets the product apart from other aluminum radiators. The wave-like shape of the ribs makes it possible to significantly facilitate the circulation of heated air along the section and significantly increase heat transfer.

Original high-quality materials and components

The gaskets between the sections are made of nano-material based on cotton with silicone and graphite additives, which increases service life and makes leaks almost impossible. Bottom steel plugs with a protective membrane made of thermo- and chemically resistant nano-polymer. A special aluminum alloy with silicon and titanium additives reliably protects the radiator from corrosion.

No deficiencies identified.

Royal Thermo DreamLiner 500

Country of origin: Russia (unique developments jointly with Italian manufacturers).

Key Features:

• type: wall-mounted, sectional;
• maximum operating pressure – 20 atm;
• crimping pressure – 30 atm;
• operating temperature: 110 °C;
• heat output: 182 W;
• center-to-center height distance: 500 mm;
• dimensions (H/W/D, mm): 585/80/87;
• connection type: side.

Model description

These radiators can operate in both central and autonomous heating systems of residential and industrial buildings, cottages and country houses. The uniformity and durability of the coating is ensured by seven-fold application of German and Dutch nano-paints, available only in white.

One section contains 0.37 liters of coolant (water or antifreeze), weighs 1.31 kg and heats 1.8 m² of area.

These radiators can be used for at least 10 years without replacement.

Advantages and Disadvantages

Radiators of this model are a shining example good combination power and energy saving.

Innovative fin design

The aerodynamic properties of the smoothly curved ends of the fins (in the form of a drop) allow you to maximize heat transfer and evenly warm the entire room. With its compact size, the radiator is able to maintain a comfortable temperature over fairly large areas.

Reliability

The alloy of aluminum, titanium and silicon used in the radiators of this model maximizes the corrosion protection of all internal surfaces and reliably protects the heating device from low-quality coolants and water hammer.

No shortcomings were found in this model.

Royal Thermo Indigo 500

Country of origin: Russia, manufactured using Italian technology.

Key Features:

• type: wall-mounted, sectional;
• maximum operating pressure – 20 atm;
• crimping pressure – 30 atm;
• operating temperature: 110 °C;
• heat output: 205 W;
• center-to-center height distance: 500 mm;
• dimensions (H/W/D, mm): 585/80/100;
• connection type: side.

Model description

Radiators of this series can be connected to closed and centralized heating systems of residential, industrial buildings and individual buildings. The durability of the coating is ensured by applying imported nano-paints in 2 stages using special European technology; they are produced in white.

The coolant can be either water or antifreeze; manufacturers provide a ten-year warranty on the operation of these heating devices. One radiator section with a volume of 0.29 liters weighs 1.65 kg and heats up to 2 m² of area.

Advantages and Disadvantages

The radiators of this model are different elegant design, perfect lines and powerful heat dissipation.

Unique design

An improved additional wing at the top of the radiator creates reverse convection, which cuts off cold air coming from the window. At the same time, the heated air is evenly distributed throughout the heated area.

Thermal output increased by adding the number of vertical fins to the collector. This makes the device a little heavier, but significantly increases heat transfer.

Inertia and material

Thanks to the rapid heating and cooling of the radiator, you can quickly adjust the heat supply to the room necessary for comfortable living. An alloy of aluminum with titanium and silicon reliably protects the radiator from corrosion, and original imported protective and sealing materials protect it from leaks.

No flaws were found in this model.

Lammin ECO AL-500

Country of origin: Finland.

Key Features:

• type: wall-mounted, sectional;
• maximum operating pressure – 16 atm;
• crimping pressure – 24 atm;
• operating temperature: 110 °C;
• heat output: 190 W;
• Coolant pH: 7 – 8;
• center-to-center height distance: 500 mm;
• overall dimensions (H/W/D, mm): 577/80/80;
• connection type: side.

Model description

Radiators of this series operate in autonomous or central heating systems of residential and public buildings, as well as in cottages and dachas. The quality and durability of the coating is ensured by two-stage painting, first using the method of immersion in a paint bath, then powder spraying in an electrostatic field, the color of the paint is white.

The volume of coolant (water) in 1 section weighing 1.03 kg is only 0.35 liters. Guaranteed service life - 10 years, heating area per section - 1.9 m².

Advantages and Disadvantages

Radiators of this series are designed and manufactured taking into account Russian operating conditions and have been tested for compliance with GOST requirements. It is noteworthy that with a relatively light weight, this model has a powerful heat flow, which allows you to evenly heat large areas.

Quality of internal surface treatment

A reliable zirconium coating protects the inside of the radiator from oxidation and corrosion, increasing the service life and operation of the device. The absence of roughness on the walls of the collector eliminates the accumulation of small debris present in low-quality coolant, and therefore prevents blockages.

No shortcomings have been identified in this radiator model.

Online Ultra C 500

Country of origin: Italy.

Key Features:

• type: wall-mounted, sectional;
• maximum operating pressure – 16 atm;
• crimping pressure – 24 atm;
• maximum operating temperature: 120 °C;
• heat output: 181 W;
• center-to-center height distance: 500 mm;
• overall dimensions (H/W/D, mm): 553/80/90;
• connection type: side.

Model description

These heating devices are used in any heating systems of civil and industrial buildings, as well as in individual construction, their service life is at least 12 years. At the factory, radiators are painted only white.

The coolant in these devices is water. With a volume of 0.78 liters and a weight of 1.13 kg, one section heats an area of ​​1.8 m².

Advantages and Disadvantages

In the manufacture of radiators, injection molding technology is used; this series is adapted to Russian operating conditions. The increased diameter of the internal channels (42 mm) reduces the possibility of pipe clogging, as well as the threat of damage to the walls by low-quality coolant.

Versatility

Radiators can work in systems with pipes made of any materials; steel, copper, plastic and other polymers are suitable for them. These heating devices are not afraid of increased moisture, so they can be installed in bathrooms and showers.

The disadvantage of the model is the need for a large volume of coolant.

Rommer AL500

Country of origin: China.

Key Features:

• type: wall-mounted, sectional;
• maximum operating pressure – 16 atm;
• crimping pressure – 24 atm;
• operating temperature: 110 °C;
• heat output: 175 W;
• center-to-center height distance: 500 mm;
• overall dimensions (H/W/D, mm): 572/80/80;
• connection type: top-bottom.

Model description

Radiators of this series are used in heating systems of autonomous or central type, in civil and industrial buildings, as well as in cottages, mansions or country houses.

The quality and durability of the coating is ensured by painting in 2 stages: first, an epoxy anti-corrosion layer is applied using cataphoresis, then a layer of decorative powder paint, the available color is white.

The manufacturer provides a 5-year warranty. The area heated by 1 section is 1.7 m², volume – 0.28 l, weight – 1 kg. Water is used as a coolant.

Advantages and Disadvantages

A fluorozirconium layer and oxide film applied to the inner surface of the radiator make it completely neutral to the chemical and mechanical effects of possible impurities in the coolant. High-quality paint and varnish coating of the outer surface allows the product to maintain an elegant, presentable appearance for many years.

No deficiencies could be found.

For the right choice heating radiators you need to know about their main technical parameters. Otherwise, the result may not meet expectations. There are not many really important parameters for radiators, so even a non-professional can easily figure them out.

Features of choosing heating devices

Now people no longer need to hide or, because modern devices can become a worthy decoration of any interior. Radiators that are sold today may differ in color, size, material of manufacture and general style, so it will not be difficult to choose the most suitable option.

Attention! Despite the fact that we are accustomed to light-colored batteries, the heat transfer of black devices is approximately ¼ higher solely due to color. Although when choosing a color, it is better to focus on the design of the home and personal preferences.

Regarding the shape, it must be streamlined. For safety reasons, it is advisable to avoid sharp corners altogether, especially if children live in the house. Please check the strengths and weaknesses each of existing species radiators to determine which one is more suitable for a particular room. The first thing you should pay attention to is the operating pressure of the devices.

Depending on the material, radiators are divided into:

The above-mentioned pressure, heat transfer coefficient, heat capacity, resistance to mechanical and chemical damage, as well as service life depend on the material.

Radiators in the interior

Also pay attention to the method of connection to the heating main. The connection can be side, bottom and universal. It is typical that modern radiators provide all these connection methods.

Attention! The environmental friendliness of the material used in the manufacture of heating devices is also very important. In internal elements There should be no formaldehyde; high-quality polymer coating on the surface is also welcome.

Now in more detail about each material.

Characteristics of aluminum radiators

Heating devices made from are considered one of the most popular types of radiators. Aluminum is a light and ductile metal, therefore, batteries made from it weigh a little and have increased heat transfer.

The devices consist of sections, each of which is a set of interconnected plates. Thanks to this, heat saving here is also at a fairly high level.

Advantages similar units are as follows:

At the same time, after turning off the heating, such radiators cool down quite quickly. Among others shortcomings worth highlighting:

• instability to chemical influences (the problem can be solved by polymer coating on inner surface);
• low strength;
• poor quality of the threaded connection in the top valve for releasing air from the system.

In view of this, before purchasing it is necessary to inquire about the operating pressure of the heating system. The maximum pressure of a particular product must be looked at in the data sheet, because for different models it is different.

But still, according to its characteristics, aluminum is excellent for the manufacture of radiators, and its fusibility has made it possible to significantly expand the model range. Today you can choose exactly the battery that fits perfectly into the interior of your home.

Table 1. Comparison of aluminum batteries from famous brands

Manufacturer	Model	Weight, kg	Power, kW	Volume, l	Pressure, bar.	Dimensions, cm	Distance between axles, cm
1. Rifar, Russian Federation	Alum 500	1,45	0,183	0,27	20	9x8x56.5	50
2. Fondital, Italy	Calidor Super-500	1,32	0,193	0,3	16	9.7x8x55.7	50
2. Rovall, (Italy)	Alux-500	1,31	0,179	0,23	20	10x8x54.5	50
3. Radiatori 20000 S.p.A.	500R	1,6	0,199	0,58	16	9.5x8x57.7	50
4. Faral	Green HP-350	1,12	0,136	0,26	16	8x8x43	35
5. Faral	TrioHP-500	1,58	0,212	0,5	16	9.5x8x58	50

Aluminum radiators from STOUT Bravo are ideal for installation in apartments and houses with individual heating. These heating devices are manufactured at the GLOBAL plant, Italy. Each stage of production is controlled by European specialists. Each section is manufactured by injection molding and is a monolith of two collectors and fins connecting the sections. Available center distance– 350 or 500 mm. Manufacturer's warranty – 10 years.

Prices for popular models of aluminum heating radiators

Aluminum heating radiators

Characteristics of bimetallic batteries

The main difference bimetallic radiators It is considered that two different metals are used in the manufacturing process - steel to create the core and aluminum to assemble the body. Thanks to this, the rod is very strong. Another advantage of such products is their high working pressure, which can reach 50 (!) atmospheres. Moreover, steel works well even with water that contains various impurities, while aluminum heats up quickly and gives off maximum heat.

In short, the use of two metals at once made it possible to obtain radiators that have the advantages of each of them. Therefore, it is quite obvious that the cost of these devices is the highest among all possible options.

Attention! are used primarily for heating industrial and public facilities. In residential buildings they are rare due to their high cost.

The service life is 20-25 years, which is quite normal.

Table 2. Comparison of bimetallic radiators

Manufacturer/Model	Working fluid temperature, ᵒС	Weight, kg	Volume, l	Power, kW	Working pressure	Section dimensions, cm
1. Sira Group/Gladiator-500	110	1,6	0,42	0,185	30	8x8x42.3
2.Gordi/Gordi-500	100	1,7	0,3	0,181	30	8x8x57.2
. Rifar/Rifar Monolit-350	135	1,5	0,18	0,136	100	8x10x41.5
4.Tenrad/Tenrad-500	120	1,44	0,22	0,161	24	7.7x8x55
5.Global/Style-350	110	1,56	0,16	0,125	35	8x8x42.5

All the advantages of using bimetallic radiators are clearly expressed in the design of STOUT Space heating devices. These radiators are easy to install, they are suitable for rooms of any design and have a reliable design. The maximum pressure that a heating device can withstand is 100 atmospheres. Production - Russian plant "RIFAR", the largest in the country. Service life - 25 years, warranty from the manufacturer - 10 years. available from 4 to 14 - you can complete any object and select a radiator for a room of any size.

Prices for bimetallic batteries

Bimetallic batteries

Characteristics of cast iron radiators

Such batteries are the most common and well-known option for everyone, since they are the ones that are installed in most cases. standard apartments. Agree, old cast iron appliances can hardly be considered stylish and attractive. New models look better, but in terms of aesthetic indicators they are still significantly inferior to devices made from other materials.

As you know, cast iron is very heavy. Batteries made from it weigh a lot, which cannot but affect the complexity of transportation and installation.

Let's consider their main advantages.

But cast iron also has flaws, among which:

• significant weight;
• slow heating;
• unaesthetic.

Attention! Despite the abundance of more modern analogues, many prefer to install cast iron batteries, trusting what has been tested for decades.

Table 3. Comparison of cast iron batteries from the most famous manufacturers

Manufacturer/Model	Weight, kg	Volume, l	Heating area per section, m²	Power, W	Pressure, atm.	Dimensions, mm
1. Konner, Modern	Up to 4.75	Up to 0.96	-	Up to 150	12	80x60x565
2. World Cup-3	Up to 7	1,38	0,25	156	9	120x90x570
2. World Cup-2	Up to 6.3	0,8-0,95	0,2	100-142	9	100x80x570
2. World Cup-1	Up to 4.8	0,9	0,1-0,16	110	9	70x80x570
5. MS-140	Up to 7.1	1,45	0,24	160	9	140x93x588

Prices for popular models of cast iron radiators

Cast iron radiators

Low carbon steel is used in the manufacture of these devices. For protection purposes, the surface is coated with special enamel. If good quality, then they have excellent operational parameters, among which:

• strength;
• reliability;
• corrosion resistance;
• durability;
• resistance to various types of aggressive substances.

Such batteries can be tubular or panel.

Tubular devices

For their assembly, high-quality polymer-coated steel pipes are used. The maximum load that the devices can handle depends solely on the thickness of the pipe walls. It is desirable that the pipes are made of stainless steel.

The service life of tubular devices significantly exceeds that of panel devices and is about 30 years. It is possible to connect using all the methods described above. The operating pressure is 10-16 atmospheres; more detailed data should be clarified in the product data sheet.

Prominent representatives tubular radiators are models produced by Loten:

• Loten Gray V;
• horizontal LotenGrey Z.

These radiators are made of steel profile pipe having a rectangular cross-section. In addition to providing comfortable heating, the presented radiators demonstrate latest trends in the design of heating devices, fitting perfectly into the interior of any home.

When creating Loten tubular radiators there were two main ideas:

• create high-quality heating equipment: for the manufacture of radiators, high-strength metal with a wall thickness of 2.5 mm is used, due to which these heating devices have an operating pressure of 16 atm. Radiators withstand test pressure of 25 atm;
• at the same time turn the battery into a stylish element of the interior of a home, office space, location public use etc.

The presented heater models can have a different number of sections, from 4 to 12. The length of the sections varies from 750 to 2000 mm. The price of each heating element is directly dependent on the following parameters:

• number and length of sections;
• connection type (side/bottom).

At no extra charge, you can purchase radiator models painted in colors that are at the peak of popularity in relation to interior design:

• matte black;
• classic white;
• soft beige;
• concrete gray.

However, lovers of bright furnishings can order any other colors and shades.

The presented radiator models are suitable for connection to a central as well as an autonomous system. Size range is really wide, you can equip the presented radiators as a cozy small one-room apartment, and a spacious country mansion.

Each model can be with side or bottom connection. Heating systems that are suitable for this battery can be:

• single-pipe;
• two-pipe.

The high quality of the material and the laconic style of the products will allow them to take a place not only in the apartment, but also in the list of your preferred interior items for many years. Their peculiarity is that they have a long service life (warranty - 5 years, service life - 30 years), so you won’t have to think about changing batteries soon. This means you can confidently trust the manufacturer and make a choice in favor of the devices reviewed.

Panel instruments

As the name suggests, such radiators are made in the form of panels. To do this, a certain number of steel plates are connected to each other. Thanks to this assembly, high heat capacity is achieved, while the thickness of each individual plate is insignificant. In addition, they weigh a little and provide the ability to connect in all available ways.

Attention! Before purchasing new heating devices, look at how your old ones are connected. It is advisable that new batteries do the same.

The cost of panel radiators is slightly higher than average; the operating pressure is 10 atmospheres. According to experts, such units are best used in autonomous heating systems. As for city apartments, the use of such batteries is unacceptable due to too high pressure in the central system.

Table 4. Comparison of steel radiators measuring 50x50 cm from the most famous manufacturers

Manufacturer	Connection	Weight, kg	Volume, l	Power, W (at +70ᵒС)	Maximum permissible liquid temperature, ᵒС	Pressure, atm.
1.DeLonghi RADEL(Italy)	Lower	14,9	3,1	1079	110	8,7
2. Purmo (Finland)	Side + bottom	13,6	2,6	926	110	10
3. Korado Radik (Czech Republic)	Side + bottom	15,6	2	914	110	10
4. “Lidea” (Belarus)	Side + bottom	15,1	3,3	1080	110	8,6
5. Buderus (Germany)	Side + bottom	14,1	3,15	913	120	10
6. Kermi (Germany)	Side + bottom	17,7	2,7	965	110	10

Prices for steel radiators

Steel radiators

As a conclusion

It is worth noting that any of the described types of batteries can be used for heating systems in residential premises. Although purchasing bimetallic devices is often impractical, because their advantages are almost the same as those of aluminum ones, but the cost is several times higher. Therefore, it is better that they continue to remain in industrial and public facilities.

It is undesirable to install aluminum appliances in apartments due to pressure drops in the system, which negatively affect the metal. The optimal and proven option for apartments over the years is cast iron batteries. One way or another, you need to focus on financial capabilities and personal wishes.

For those who do not want to dive into independent calculations, we recommend using a special calculator for calculations, which takes into account almost all the nuances that affect the efficiency of heating a room.

Gone are the days when we all lived in buildings equipped with the same radiators. These cast iron monsters were large in size, but quite reliable and efficient in operation. Another problem they had was in appearance and design: in Soviet times, they didn’t think much about beauty, because the main thing was that the battery would heat constantly and stably. Today the situation has changed dramatically: on the market you can find more technically advanced radiator heating systems that not only work efficiently, but also look very good in appearance.

Our proposed rating includes best radiators heating systems designed for installation both in private houses and in apartments connected to a central heating system. The selection covers: bimetallic, aluminum, cast iron and steel radiators.

TOP 10: Rating of heating radiators for apartments and houses 2020

Name	Radiator material	Dimensions (Length/Height/Depth)	Expert assessment	Price in rubles
"Global STYLE PLUS 500"	Bimetallic	80/575/95 mm	⭐ 9.9 out of 10	8400 RUR
"Sira RS Bimetal 500"	Bimetallic	80/572/95 mm	⭐ 9.8 out of 10	7000 RUR
"Rifar Monolit 500"	Bimetallic	320/577/100 mm	⭐ 9.8 out of 10	7900 RUR
"MZOO MS-140M-500"	Cast iron	588/459/140 mm	⭐ 8.7 out of 10	from 500 RUR
"Viadrus Styl 500/130"	Cast iron	60/580/130 mm	⭐ 9.4 out of 10	2500 RUR
"Thermal Standard Plus 500"	Aluminum	237/531/73 mm	⭐ 8.5 out of 10	from 400 RUR
"Sira Alice Royal 500"	Aluminum	320/580/95 mm	⭐ 8.7 out of 10	from 600 RUR
"Kermi FKO 22 500 1000"	Steel	1000/500/100 mm	⭐ 8.4 out of 10	7150 RUR
"Rifar Base Ventil 350"	Bimetallic	79/410/90 mm	⭐ 9.7 out of 10	8300 RUR
"KZTO Elegant 1 250"	Bimetallic	500/250/110 mm	⭐ 9.8 out of 10	8500 RUR

Note:

Water hammer is the main root cause of failures of radiator heating systems in multi-storey buildings. Control of pressure differences inside heating system is not available to us, but we have the opportunity in a number of situations to forestall the threat of a problem. If you hear clicks or buzzing, then these are the first signs of a sharp change in the pressure level in heating batteries, in the event of which you should immediately contact utility services.

The best radiator heating systems for apartments

"Global STYLE PLUS 500"

The product from the Italian company is sold in stores with a ten-year warranty from the manufacturer, which already proves the high quality of workmanship. Different high level heat transfer, since each section is made of a steel core and an outer layer of aluminum. Withstands pressure up to 35 atmospheres, so the heating radiator can be safely installed in an apartment multi-storey building. The design of the internal cavities of the radiator eliminates the formation air jams, which also protects against water hammer.

Advantages of the model:

• Cute design;
• Efficient level of rapid heat transfer;
• Italian quality;
• Resistant to water hammer.

Identified deficiencies:

• Poor heating at low coolant temperatures;
• Quite a high price.

"Rifar Monolit 500"

The bimetallic model, made of aluminum and steel, made it into our rating due to its amazing durability and reliability. The unique design of the product practically does not allow the possibility of leaks, and the excessive resistance to a maximum pressure of 100 atmospheres allows you not to worry about water hammer. Another plus is the unpretentiousness to the quality of the coolant liquid used in the central heating system.

Advantages of the model:

• Reliability and wear resistance;
• Minimal risk of leaks;
• Not bad appearance;
• Resistance to water hammer;
• No sharp corners.

Identified deficiencies:

• Sold in pairs only;
• Price.

"Sira RS Bimetal 500"

The heating battery is also made of steel and aluminum, which helps to significantly increase the speed of heat transfer. Capable of operating at an internal pressure of 40 atmospheres, which is more than enough to connect to the central heating system. In addition to apartments, it can also be used in offices, as it provides for the simultaneous use of 20 sections.

Advantages of the model:

• Workmanship;
• High level of resistance to water hammer;
• Attractive design;
• High heat dissipation.

Identified deficiencies:

• High cost.

"MZOO MS-140M-500"

An indestructible Soviet classic: a model for those who are experiencing financial difficulties or want to save money on the purchase of radiator heating systems. It warms up slowly, but also cools down slowly. Manufactured in Belarus, the manufacturer provides a modest three-year warranty, but this battery will last significantly longer.

Advantages of the model:

• Unpretentiousness;
• Resistance to water hammer;
• Good heat dissipation;
• Minimum cost.

Identified deficiencies:

• Dimensions and weight;
• Unpresentable appearance.

"Viadrus Styl 500/130"

A more expensive version of a cast iron radiator heating system with an attractive appearance and good performance characteristics. Made in the Czech Republic, workmanship is above average. Suitable for installation in low-rise buildings; it is not recommended for installation in high-rise buildings due to low resistance to changes in internal pressure: the battery is designed for an average operating pressure of 12 atmospheres, the stability threshold according to the data sheet is 18 bar.

Advantages of the model:

• Good heat dissipation;
• Reliability;
• Workmanship;
• Low price;
• Unpretentiousness to the quality of the heat transfer fluid used.

Identified deficiencies:

• Weak resistance to water hammer;

The best radiator heating systems for private homes

"Thermal Standard Plus 500"

Product of Russian defense enterprise"Zlatmash". Made using pressing, it compares favorably with competitors' products in price and high level of heat transfer. The battery will function normally even at a pressure of 24 atmospheres: according to this parameter, it is also suitable for installation in high-rise buildings. Unfortunately, like all aluminum batteries, the product is sensitive to the acidity level of the coolant, so it should only be installed in private homes.

Advantages of the model:

• High level of heat transfer;
• Light weight;
• Low price;
• With proper use it will last a long time.

Identified deficiencies:

• Sensitivity to coolant quality.

"Sira Alice Royal 500"

The strict contours of the radiator fins give the model versatility, so it can fit perfectly into any room interior. Parts are injection molded, which provides additional wear resistance and guarantees long service life. correct use. Works stably at a pressure of 16 atmospheres, warranty period work from the manufacturer - 15 years.

Advantages of the model:

• Appearance;
• Reasonable price;
• Long service life.

Identified deficiencies:

• Will suffer from corrosion if the wrong coolant is used.

"Kermi FKO 22 500 1000"

Panel heating radiator made of steel with side connection. It is made in the form of a monoblock, so it is easy and quick to install. Corrugated fins increase the level of heat transfer, and a small volume of liquid used for heat exchange will speed up the process of heating the room. Manufactured in Germany, assembled with care and quality materials. Unfortunately, the device is designed only for use in the private sector and can withstand a maximum pressure of only 13 atmospheres.

Advantages of the model:

• Aesthetic appearance;
• Fast and efficient heat transfer;
• Easy installation;
• Made in Germany.

Identified deficiencies:

• Overpriced;
• Weak resistance to water hammer.

"Rifar Base Ventil 350"

A universal model made of bimetallic alloy, which is suitable for installation in apartment buildings or private homes. Quick to install, you can choose ribs of different heights. It will work stably at a pressure of 20 atmospheres and a coolant temperature of 135 degrees Celsius. The only negative, besides the price, is the quality of the paint.

Advantages of the model:

• Good level of heat transfer;
• Appearance;
• Build quality;
• Versatility;
• Quick installation.

Identified deficiencies:

• At elevated battery temperatures, the paint will peel off quickly.

"KZTO Elegant 1 250"

Compact, bimetallic heating radiator, which can be installed on the floor or attached to the wall. An alloy of copper and aluminum is responsible for heat transfer: it ensures increased efficiency of the device. Only water is used as a coolant, which limits the radiator’s application possibilities (not suitable for installation in some systems central heating). The maximum operating pressure level is 15 atmospheres.

Advantages of the model:

• Compact dimensions;
• Efficient and economical use of heat sources;
• Several painting options to choose from;
• Good package: it includes a Mayevsky crane.

Identified deficiencies:

• Price;
• Flimsy thread at the system connection interface.

What should you consider when choosing heating radiators? What is the best radiator to buy?

When purchasing new radiator heating systems, you must find out what materials the device is made of. For example, when installing a new battery in an apartment, two options, namely radiators made of steel and aluminum, should be discarded immediately: the former suffer greatly from pressure changes, and the latter from corrosion. Bimetallic models are good for everyone, but they are much more expensive than other types of products. If reliability is important to you and you don’t want to overpay extra money, then you should opt for the usual heating systems made of cast iron: on the market you can find many decorative products made from this material with an attractive appearance, extraordinary design and at an affordable price.

At the moment, many people use aluminum radiators. Such batteries are better than the old cast iron ones, and the variety of models allows you to choose the most suitable option. Let's consider aluminum heating radiators, which ones are better to choose, what characteristics you should pay attention to when choosing, and how to install the products correctly.

To understand which aluminum heating radiators are best for an apartment, you should know what to look for when choosing them. The most commonly used models are those with a center distance of 500 mm. The presented parameter indicates that the distance between the upper and lower radiator manifold is 500 mm. In this case, the vertical dimension of these batteries is 580 mm.

The choice of the number of heating radiator sections is determined based on how much heat you need to receive. Ours will help you calculate this. It is important to note that the heat exchange of products occurs both by convection and by radiation, and during their installation a distance of more than 100 mm must be maintained from the floor and window sill. If you cannot maintain the specified distance, you should purchase smaller batteries and install more sections.

For walls with a large glazing area, it is better to choose options whose size between the central parts of the collectors is 200 mm. They are also suitable if you have low window sills in your room. There are also non-standard aluminum radiators, the size of which does not exceed 800 mm. If we talk about the number of sections, then most often there are 10 of them, and each weighs up to 1.5 kg.

Advantages of aluminum batteries

Why choose aluminum batteries? They have excellent thermal conductivity and low weight. Accordingly, problems should not arise during installation of the product and its transportation. One section weighs up to 1.5 kg. Compared to cast iron battery- this is quite a bit, so even two people can install heating devices. However, you will have to carefully check the fastenings so that the device does not fall off.

Among the positive characteristics of aluminum products, it is worth highlighting:

1. Variety of sizes.

You can choose a device that suits your space perfectly. In some stores there are batteries up to 2 meters high!

2. Coolant savings.

How less quantity coolant in the battery, the faster the device will heat up. Accordingly, aluminum options, one section of which can hold up to 500 ml. liquids are more profitable than cast iron, which holds about 4 liters.

3. Beautiful design.

Products made from the presented metal are easy to process. Thanks to this, they can be given any design look. The batteries look elegant and impressive; they do not need to be hidden under curtains or special boxes.

Types of radiators

If you are interested in the best aluminum radiators, you should know that they can be different types– extrusion and injection molding. Which ones have the best characteristics? In fact, different types has its advantages and disadvantages.

Extrusion

Aluminum radiators of the presented type are manufactured using the extrusion method. This means that they are extruded using an extruder under high pressure. Then the battery is pressed into the collectors. It is not possible to disassemble the type of battery presented.

Positive features of the presented model:

Not high cost;
Higher heat transfer;
Light weight;
The internal volume of the section is smaller than that of cast models.

Negative features of heating radiators:

There may be a cracking sound inside the battery;
The device cannot be disassembled or rebuilt;
The junction between the section and the collector is quite weak.

Along with the type of batteries considered, injection molded models are used. Let's consider their characteristic features.

Molded

When asking the question - which aluminum heating radiators are best for a private home, you can answer that it is worth considering injection molded models. They cost more, but they are also more durable. These batteries are produced using the casting method.

The main advantages of the device:

1. Ability to change the number of sections.

2. High tightness and reliability.

There is only one minus - the high cost, but the model will last much longer. Extrusion batteries may not withstand the pressure, but if finances are a problem, you can purchase them. But in this case, you should give preference to a proven brand.

Anodized

Aluminum heating devices can also be anodized. But this option is rarely used, since the new product is expensive. The presented batteries are made from aluminum, which has undergone anodic oxidation, which changes the structure of the metal.

The model is also characterized by the fact that its outer surface looks very attractive - it is smooth and shiny. The sections of the device are connected to each other using couplings. The operating pressure that the device can withstand is 55-60 atmospheres.

Crimping and working pressure

When choosing aluminum heating radiators, you should pay attention to which companies are better valued by consumers, and what pressure testing and operating pressure the device has. How to find out these values? They are written in the model's passport. Operating pressure is the pressure that the battery can withstand on a daily basis. For aluminum it is equal to the value - from 10 to 15 atmospheres.

Aluminum batteries are actively used in private houses and cottages. This is advisable, since the operating pressure of boilers in such buildings is about 2 atmospheres. In an apartment, it is better to use devices made of a different material, since the operating pressure in it can reach up to 30 atmospheres.

Crimping pressure is an indicator characterizing the maximum pressure a device can withstand for a short time. In the fall, pressure testing is carried out in the apartments as planned, at which time the working pressure increases by 2 times. That is why it is recommended to opt for models that have a supply of pressure testing.

Thermal indicators

When choosing aluminum heating radiators, or rather which models are better, you should pay attention to their thermal performance. Usually they are indicated in the passport for the product - both for the section and for the entire product as a whole. Aluminum batteries heat up better than products made from other materials, so they are more economical to use. Their service life is up to 25 years, and some brands offer a 30-year warranty.

Manufacturer selection

Among the many models of heating radiators on the market, you can get confused. Various manufacturers technical specifications, composition, design - all this is taken into account by the consumer to provide comfortable heating in his home. There are certain criteria based on which you can successfully select the appropriate device:

1. Price. A very large number of consumers pay attention to this criterion because they want to save money.

2. Heat dissipation. The main parameter of any heating device. The efficiency of heating the room depends on it. The higher this indicator, the better. You need to start from 100-150 W per 1 sq.m. premises.

3. Reliability and durability. The domestic centralized heating system has very aggressive factors: poor quality water with particles of rust and scale, as well as various impurities, different pressures lead to the fact that heating devices are subject to severe corrosion and water hammer. Therefore, you need to choose equipment that is resistant to corrosion and can withstand water hammer.

4. Dimensions and weight of the device. It is desirable that the radiator fits harmoniously into the interior of the room. And the dimensions depend on the heated area. The light weight of the device ensures quick unloading and installation.
When choosing aluminum heating devices, you should pay attention to the manufacturer. The most popular are Russian, Italian and Chinese brands. Let's look at some of them.

Global Radiators: Italian manufacturer, which began its activity in 1971. All products meet quality standards and are constantly expanding. Aluminum batteries are made from high-tech alloys using casting and high pressure. Well applicable in cold winter conditions in our country. Models of the aluminum series from the Italian manufacturer: ISEO, VOX, OSCAR, VIP, MIX, JUNIOR and others.

— Saving thermal energy due to physical properties aluminum heats up quickly and gives off heat evenly in a short time;
— accurately and quickly execute thermostat commands;
— comfort and convenience;
— suitable for low-temperature heating systems;
— operating pressure is up to 16 atmospheres.

Aluminum heating radiators from Global are a profitable solution for reducing energy costs.

Sira Industry: the first Italian founder and leader in the production of aluminum heating radiators, has a worldwide patent since 1961. The production of such devices is carried out using the most modern technologies and is aimed at achieving high performance characteristics and low energy consumption. The products are made with the typical Italian elegance. The aluminum radiator models “Alux” and “Nik” received positive reviews. Today, the company’s product range is huge and also includes injection molding and extrusion devices.

- light weight;
— high level of heat transfer;
— beautiful design;
- excellent for autonomous heating systems.

Fondital: Italian company. The products are intended for heating systems of residential buildings and public and administrative buildings. All European production standards are taken into account in the developments. Adapted for use in Russia. If all operating rules and regulations are observed, such equipment can last 30 years. For low-temperature heating systems, cast and extruded radiators are provided.

— Long service life;
— adaptation to the conditions of our country;
— a protective layer on the inner surface of the radiator, capable of withstanding the aggressive influence of the coolant and its quality;
— work at pressures up to 16 atmospheres;
- even meet Russian standards.

Nami: heating radiators made in Hungary. Technically made flawlessly, reliable and durable. They comply with European and Russian quality standards. Today, these are the best heating radiators, if we take into account the “price-quality” criterion. The model range is able to function normally with low quality coolant, for example NAMI “Grande”. Devices are also produced of a standard type - NAMI “Classic”, which do not have outstanding technical characteristics.

Radiators:

— have a double coating against corrosion;
— withstand high coolant temperatures (up to 120 degrees);
— the heat transfer of one section is 195 W;
— warranty period – 10 years.

Rifar: a domestic manufacturer producing products under license from the Italian company Global. During the production process, very high-quality and modern European equipment is used and the conditions of use for our country are taken into account.

— operating pressure reaches 20 atmospheres;
- you can use antifreeze;
— heat output 183 W;
- practical design vertical channel without the use of welding;
— service life is about 25 years;
— warranty – 10 years.

SMART: a Chinese company that produces universal heating devices made of aluminum, which are inexpensive.

— Many shapes and sizes;
- low cost;
- universal and reliable.

Which batteries are better to take, regarding alkalinity? The requirements for it are quite high (7-8). If this level of coolant quality is not available, then you should turn your attention to heating devices from another manufacturer.

Cost of heating devices

What brands of batteries are inexpensive? In fact, radiators from Italian manufacturers, distinguished by their elegant shapes, are quite affordable - from 350 to 700 rubles. per section. Russian devices, for example, RIFAR, sell their products at a price of about 400 rubles. per section.

The cheapest batteries are Chinese ones, for example, from Konner or Bilux. Their price per section is determined as 350 rubles. At the moment, China produces a huge number of heating appliances from well-known brands. At the same time, despite the low cost, the products are of high quality. However, when choosing Chinese models, you should take into account their performance in compliance with indoor operating conditions.

Important! When choosing a battery, you must remember that aluminum products quickly deteriorate under the influence of water with a high pH level. It should be below 7.5 units. That is, the installation of devices will be advisable only if the coolant meets the presented requirement.

So on given time A large number of companies produce batteries from aluminum. Products from various manufacturers perfectly heat rooms; they can have various shapes, sizes and color. When choosing batteries, you should pay attention to their operating pressure, reliability, heat transfer, and cost. If all the presented parameters suit you, you can buy the equipment.

How to choose an aluminum heating radiator. Video lesson