The popularity of cyclamen - this lovely flowering plant - has only been increasing recently. In indoor culture, two types are most common: Persian cyclamen and European cyclamen. Both are captivatingly charming original flowers. Persian cyclamen blooms in winter, when few plants bloom brightly. Read our article on how to care for cyclamen at home.

Cyclamen. © Thomas Kohler

Description of the cyclamen plant

Genus Cyclamen ( Cyclamen), or Dryakva, or Alpine violet from the Myrsinaceae family ( Myrsinaceae), sometimes attributed to the family Primroses ( Primulaceae) and includes about 20 species.

Species of the genus Cyclamen - perennial herbaceous plants, common in the Mediterranean; from Spain in the west to Iran in the east, as well as in Northeast Africa, including Somalia.

The basal dark green, leathery, heart-shaped leaves of cyclamen are located on long petioles up to 30 cm and have a decorative grayish silver pattern.

Cyclamen flowers are very original: pointed, curved back, sometimes fringed petals give the impression that a flock of exotic butterflies is circling over the plant.

The color palette of cyclamens is very wide: hybrids with snow-white flowers have been bred, the whole range of pink shades to dark red, burgundy, and purple. Cyclamen bloom lasts quite a long time, up to 3.5 months. Depending on the variety and room conditions flowering can begin in the second half of October and last until the end of March.

Very often, cyclamens are described as capricious and difficult to cultivate plants. In fact, cyclamen is unpretentious, and the few requirements that it makes in culture can be very easily satisfied.

Cyclamen. © Ria Baeck

Caring for cyclamen at home

Lighting and temperature

Cyclamens are light-loving, but do not tolerate direct sunlight. It is better to keep them in partial shade. They grow well on the windowsills of western and eastern windows. South windows will require shading from direct sunlight. Plants near windows with northern exposure may not have enough light.

A necessary condition for the normal development of cyclamens and their abundant flowering is light and cool conditions in winter (about 10°C, not higher than 12-14°C). In summer, the preferred temperature is around 18-25°C (the pot with the plant can be taken to a shady place and buried).

Watering and spraying

During flowering, the plant is watered abundantly or moderately with soft, settled water, avoiding both waterlogging and drying out of the earthen clod. You should water the cyclamen carefully, into the edge of the pot, trying not to soak the buds and tubers, or even better, from the tray.

Water should not be allowed to get into the core of the plant - the tuber may rot. The water temperature should be 2-4°C below room temperature. After 1-2 hours, excess water is drained from the saucer to prevent the roots from rotting. After flowering, watering of cyclamen is gradually reduced, and by the beginning of summer, when all the leaves turn yellow and dry out, and the tubers remain bare, watering is rare.

Before the buds appear, the plants are sprayed from time to time. Once the buds appear, spraying of cyclamen should be stopped, otherwise they may rot. To increase humidity, the plant can be placed on a tray with damp moss, expanded clay or pebbles. In this case, the bottom of the pot should not touch the water. It is better to use rainwater, filtered or settled water.

Cyclamen. © liz west

Feeding

During the period of growth of leaf mass before flowering, plants are fed with complete mineral fertilizer every 2 weeks. Cyclamens respond well to organic fertilizers. You should not give too much nitrogen fertilizer - the tuberous roots may rot.

Caring for a flowerpot at rest

Cyclamen blooms for quite a long time. Depending on the variety and room conditions, it can begin in the second half of October and last until the end of March. In the spring, after flowering ends, the plants go into a dormant state (they begin to lose leaves). In this regard, watering is gradually reduced, and by the beginning of summer, when all the leaves turn yellow and dry, and the tubers remain bare, watering is rare.

The room where the plants are located is regularly ventilated. More better pots At this time, take the tubers into the garden or onto the balcony in a place protected from the sun. After a period of rest (late summer - early autumn), cyclamen is placed in a bright, cool place and watering is gradually increased.

Another option for preserving a tuber until a new one winter season is as follows. After flowering ends, watering is significantly reduced. Then, after the leaves fall, the pot with cyclamen is laid on its side and kept in this position until the next season.

Cyclamen grows for 10-15 years and can produce up to 70 flowers annually. Faded and wilted flowers are removed along with the peduncle. As the flowers fade and the leaves turn yellow, they are plucked off (but not cut) from the tuber itself. The break areas should be well sprinkled with charcoal powder.

Cut (pulled) cyclamen flowers stand well in water (1-2 weeks). The water in the vase needs to be changed every 2-3 days. After cutting, the ends of the peduncles are cut lengthwise for 2-3 days. This extends the cutting period to 2-3 weeks.

Transfer

At the end of summer and autumn, when small heart-shaped leaves begin to sprout from the cyclamen tuber, the plants are brought indoors and transplanted into a wide container with a fresh loose mixture of leaf soil, humus, peat and sand (2-3: 1: 1: 1).

The substrate can consist of 2 parts of leaf soil, 1 part of well-decomposed humus soil and 0.5 parts of sand. The acidity of the substrate (pH) should be about 5.5-6. At a higher pH (about 7), plants become susceptible to various fungal diseases.

During the process of replanting cyclamen, care is taken not to damage the roots, and rotten roots are cut out. For 1 kg of substrate you can add 0.4 g of ammonium nitrate, 1 g of superphosphate, 4 g of phosphate rock.

Please note that when transplanting, you cannot completely bury the tuber. One third or even half of the tuber should be above the soil surface, which will have a beneficial effect on the further flowering of the plant. The bottom of the pot provides good drainage.

Cyclamen. © Andrea_44

Reproduction of cyclamen

Propagating cyclamen at home is quite difficult. Hobbyists usually resort to dividing the tuber. You can also grow it from seeds, but you will have to wait longer for flowering.

To obtain good, full-fledged cyclamen seeds at home, artificial (preferably cross) pollination is necessary. Using a soft brush, take pollen from a flower of one plant and transfer it to the stigma of another. If there is one plant, then pollen from one flower is transferred to the stigma of another. For greater reliability, this procedure is repeated 2-3 times.

The best time for pollination of cyclamen is the morning hours of a clear sunny day, as in this case the ovaries form faster. At this time, it would be good to feed the plants with phosphorus-potassium fertilizers (1 g of superphosphate and 0.5 g of potassium sulfate per 1 liter of water). Seeds should not be dried after collection, otherwise germination will be greatly reduced.

Cyclamen seeds are often available for sale, but they are much less reliable than growing your own. Their germination strongly depends not so much on the manufacturer, but on the batch of seeds.

The optimal time for sowing Persian cyclamen seeds is August, as it has a dormant period in the summer.

Before sowing, cyclamen seeds can be poured with a 5% sugar solution and only those that have sunk to the bottom can be taken (those that have floated are not suitable). Also, seeds are soaked in a zircon solution for a day.

Use a light substrate, for example, mix leaf soil and peat in a 1:1 ratio, or peat and vermiculite (1:1).

Cyclamen seeds are laid out on the surface of a moistened substrate and sprinkled thin layer earth (0.5 - 1 cm). Seeds do not need light to germinate, so they can be covered with an opaque film. Optimal temperature for germination +20°C, if it is higher, germination is inhibited and the seeds may go into hibernation. You should also not lower the temperature below +18°C, as the seeds will simply rot at this temperature. It is necessary to monitor the soil moisture and periodically ventilate the container with seeds.

Usually at a temperature of +20°C, cyclamen shoots appear in 30-40 days. After the seedlings germinate, remove the shading, place it in a well-lit place, without direct sunlight, and lower the temperature to +15-17°C.

When cyclamen seedlings form small nodules with two or three leaves (around December), they are planted in a container with a mixture of leaf soil, peat and sand (2:1:0.5). When picking, the nodules are covered with earth, whereas in an adult cyclamen the top of the tuber is usually not covered.

A week after picking, they can be fed with flower fertilizers in a half-diluted dose. You can feed with a 0.2% (2 g/l) solution of ammonium sulfate, and after another 10 days - with 0.1% (1 g/l) potassium nitrate. In April-May they are transplanted into individual pots.

Cyclamens grown from seeds bloom 13-15 months after sowing.

Cyclamen. © Lisa Cancade Hackett

Diseases and pests of cyclamen

Fusarium wilt

Fusarium is a fungal disease caused by the fungus Fusarium; under its influence the vascular system and plant tissues are affected. The disease has several names: “drying out”, “core rot”, “dry rot”.

With fusarium wilts, damage and death of plants occur due to a sharp disruption of vital functions due to blockage of blood vessels by the mycelium of the fungus and the release of toxic substances. Pathogens persist for a long time in the soil and on plant debris and enter plants through root system And bottom part stem.

Symptoms: Externally, the disease manifests itself in yellowing of the leaves, which begins from the tops. Often yellowing and wilting of leaves occurs on one side of the plant. The second side of the cyclamen can continue to grow, but good flowering It’s hard to expect anything from such a plant. The fungus enters the plant through young roots and spreads throughout the tuber. The affected tissues are destroyed; the general appearance of the plant deteriorates. A section of the tuber shows the affected vascular bundles.

Control measures: watering plants at the roots with foundationazole (0.1%), spraying the above-ground mass with topsin-M (0.1%).

Wet rot

This is a very dangerous bacterial disease. Caused by the pathogen Erwinia.

Symptoms: the disease begins with the plant suddenly withering, leaves and peduncles hanging from the pot, and an unpleasant putrid odor emerging from the infected tuber. The roots of the cyclamen also begin to rot. The bacterium enters the plant through cracks and wounds on the tuber or vegetative organs. Cyclamen infection often occurs in places where leaves or flower stalks are torn off. The source of infection is contaminated water or a diseased plant. The appearance of the disease is promoted by warm and humid weather in the summer when cyclamens are kept in the garden, on the balcony, or on the loggia.

Control measures: does not exist, cyclamen must be destroyed in order to prevent diseases of other plants.

Gray rot

The fungus Botrytis cinerea attacks plants that are weakened due to poor location; it is especially dangerous in damp and cold air. Fungal spores are spread by wind and water. Infection occurs at high humidity, high density of cyclamen and cold night conditions. Improper watering and water getting into the “growth point” of leaves and buds contribute to the development of this disease in the plant.

Symptoms: appears on the leaves and stems of cyclamen gray mold which takes off when there is strong air movement; the affected parts of the plant darken and die. Peduncles are especially susceptible to this disease. Cyclamen leaves turn yellow and die.

Control measures: Carefully remove affected parts of the plant. Ventilate the room, but avoid drafts. Spray cyclamen less often, water less (preferably in the morning, so that the soil has time to dry out during the day). The diseased plant is being treated systemic fungicide.

Root rot

Root rots are caused by various fungi (Rhizoctonia solani, Ramularia cyclaminicola); The pathogens live in the soil. The disease occurs when planting cyclamen in a regular garden soil, which has not been steamed. The disease often attacks young cyclamens, slowing their growth.

Symptoms: dark, non-viable areas appear on the roots of young and adult cyclamens. Symptoms appear on the leaves as if they do not have enough chlorophyll: the leaves turn pale because they lack nutrition due to damaged roots.

Control measures: use only sterilized soil for planting cyclamens. If cyclamen is sick, try drenching the soil with a systemic fungicide. But this measure is not always effective; The young cyclamen will most likely not be saved. You may have to part with your pet. You can try to save an adult cyclamen. It must be removed from the pot, washed and damaged roots removed, then treated with a fungicide and planted in a steamed earthen mixture.

Anthracnose

Caused by a fungus of the genus Gloeosporium. This is a soil fungus that harms cyclamens during flowering. The disease develops in warm and humid conditions.

Symptoms: The growth zone of leaves and peduncles is affected. The disease may remain undetected for some time until the cyclamen produces flower stalks. The affected peduncles stop developing, look distorted, and the upper part of the peduncles seems to dry out. Flowering does not occur because the flower stalks do not develop. Contact with infected peduncles causes infection of the leaves. Young leaves dry out and curl at the edges, old leaves dry out and die.

Control measures: To prevent disease, use steamed soil. If symptoms appear, try to remain relatively low level humidity. Remove damaged flower stalks and leaves. Treat the diseased plant with fungicides 2-3 times.

Sooty fungus

Symptoms: The black fungus appears on the sweetish secretions that aphids leave on the leaves. An ugly-looking coating of fungus in itself is not dangerous for the plant, but it clogs the stomata and covers the leaf surface from light, as a result of which growth slows down and the plant weakens. Affected leaves will dry out over time if the necessary measures are not taken.

Control measures: sooty deposits are washed off with a wet cloth moistened with a 2% solution of green soap, followed by treatment with a copper-soap solution, then the plant is washed with clean warm water. You can treat cyclamen with a fungicide.

— perennial primrose family. It is a small bush with foliage different shades green. Above the foliage they bloom bright flowers the most varied colors.

The origin of cyclamen is not exactly known. Perhaps the first flowers appeared in the Mediterranean, Iran, and Greece. It is known that there are references to cyclamen in ancient sources.

The name itself means “farewell.” That's why It would be appropriate to give a cyclamen flower to a colleague who plans to change jobs.

Features of cultivation and care at home

It is important for cyclamen lovers to know that the life of a flower is divided into two periods: the flowering period and the dormant period.

IMPORTANT! Cyclamen is very sensitive to various. Therefore, when planting, you need to sterilize not only the soil, but also the pot.

Read more about the optimal conditions and time for planting cyclamen, as well as how to plant a flower.

All manipulations should also be performed with sterile scissors or a knife.

How to water correctly? As with any other plant, watering is one of the important components of the life of cyclamen. In case if watering is carried out incorrectly, the plant may die, since its root is prone to rotting.

The main mistakes made when watering:

• Over or under watering.
• Water too cold or warm.
• Incorrectly selected fertilizers, fertilizers getting on leaves and stems.
• Water ingress on top part root

How?

Water the cyclamen with softened water. He really doesn’t like cold water, so it should be at room temperature, or 2 - 3 degrees lower. The water needs to be settled. Some advise using cooled, boiled water to protect the plant from bacteria, as it is very sensitive to various pests.

How much and when?

Watering must be done with caution. The plant does not tolerate excessive humidity. In order to determine the time of watering, it is better to focus on the soil (you can find out what the soil for cyclamen should be like and how to prepare it yourself). It should be slightly moist. There is no need to allow it to dry out.

How often?

During flowering, cyclamen is watered more often, since it is active at this time, it needs more nutrients. The frequency of watering is once every 7 - 10 days. Focus on the degree of soil moisture.

Some advise paying attention to the condition of the leaves in order to avoid flooding the plant. But this should not be done for three reasons.

1. Cyclamen leaves lose their tremor if the plant is depleted by lack of moisture.
2. This process also occurs due to excessive moisture of the root.
3. Another reason for changes in the condition of foliage is plant disease.

If watering is carried out through the top of the pot, it is better to use a watering can with a narrow spout. Water should be distributed along the edge of the pot without getting on the root rosette.

It is better to water the plant through a tray. Then it will decide for itself how much moisture it needs. Excess water must be drained approximately an hour after watering. Otherwise, the soil will become wet and the root may begin to rot. Then the cyclamen will die.

As already mentioned, the water should be settled and not very cold. Best option- water at room temperature.

During the dormant period, the watering procedure is no different from the procedure during the flowering period. You just need to water much less often.

IMPORTANT. Don't let overwatering plants. To make the cyclamen comfortable, you can spray it with a spray bottle. This should be done no more than three times a day, being careful: water should not accumulate on the root rosette.

Feeding and fertilizers

Cyclamen needs various fertilizers. It is better to use a liquid version of potassium-containing fertilizers. They need to be added during or after watering.

Using dry fertilizers can burn the plant. When using liquid fertilizers, you need to make sure that they do not get on the stems and leaves, otherwise a burn is inevitable.

We talked in detail about how and what to feed cyclamen in.

Photo

Reanimation

It happens that due to inexperience or ignorance of the owner, the flower turns out to be flooded, that is, they watered it more often than necessary. This is not difficult to determine: the leaves of the plant wither, sometimes it completely loses all its foliage.

In this case, there is no need to despair; if you take the necessary actions, the flower can still be saved.

First of all, the root must be extracted from the soil. Try to carefully wash away the remaining soil into it. Cyclamen roots are very thin and fragile, so it is not difficult to damage them.

Next, you should treat the root with some fungicide. After processing, it is slightly dried for two to three hours. Then you can plant the root in new pot into sterilized soil (you can find out how to properly transplant).

It is not the most picky plant and there is no need to be afraid to start one. If you know its characteristics, pay attention and follow certain rules, the flower will delight you with its bloom for a long time.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

For printing

Tatyana Bobrovskaya 07/28/2014 | 10166

The popularity of this beautifully flowering plant is increasing every year. But when buying cyclamen, inexperienced gardeners can easily destroy the plant. How to properly care for this flower?

Purchase

It is better to choose a healthy specimen with a large number of buds and whose tuber rises above the ground. Before going out into the cold, the pot is packed in paper and then in plastic bag. At home, the packaging is removed after about an hour. A thorough examination of the plant under a magnifying glass to detect diseases and pests will subsequently save you from many troubles. Transportation and changing conditions are serious stress for a new pet, so it is advisable to treat it with some kind of adaptogen (Epin or Zircon).

Temperature

In winter, cyclamen is comfortable at 10-14°C. I tried to keep my plants in a wide range – from 0°C to 20°C. For more high temperature Cyclamen reacts poorly. In this case, it must be sprayed with water daily, but make sure that the water does not get on the sprouting zone of the corm and flowers. A sudden change in temperature can lead to disease (botrytis).

Light requirements

Cyclamen loves good lighting, but it must be protected from direct sunlight. The formation of flower stalks begins when the daylight hours are more than 10 hours. In winter, in the absence of additional lighting, the formation of buds slows down. Conducted experiments: kept it on the north and east windows, as well as glass loggia southeast orientation. I didn't use the backlight.

1. On the north window, at a temperature of 18°C, the petioles of the leaves stretched, the flower stalks were fragile, and the plant fell apart. The buds were poorly formed and the flowering was uneven. Nevertheless, cyclamen bloomed annually from late autumn to early March.

2. On the east window, at a temperature of 20°C, bloomed for two years without rest, opening up to 19 flowers at the same time. I think that the cool east window - best place. Contrary to popular belief, a tuber can have more than just one growth point. My fifteen year old specimen has three of them, each with rosettes of leaves and flowers.

3. On the loggia the temperature ranged from 0°C to 10°C. The plant had a compact rosette of leaves and a dense bouquet of flowers. The buds opened slowly, but individual flowers lasted for more than a month.

Proper watering and ventilation

Water the cyclamen evenly, always with soft, settled water, without over-drying or allowing the water to stagnate. Cyclamen has a very delicate root system that needs a lot of air, so it is advisable to loosen the soil after watering. If the substrate is too wet, the roots develop poorly or die. Under no circumstances should water get into the middle of the rosette of leaves.

I don’t water through a pan, because I believe that it is not always possible to thoroughly wet the substrate (especially peat) if it is dry. It is advisable to water in the morning. High humidity in the cold season it entails diseases of gray rot and botrytis. However, during active growth and the formation of buds, you should not overdry the earthen ball - this greatly affects the quantity and quality of flowers.

Landing

The soil is suitable loose, nutritious, breathable, slightly acidic (pH 5.5-6.5), for example, from peat, sand, leaf soil and agroperlite (it creates additional aeration and allows delicate roots to develop better). Drainage is required.

Pots are selected depending on the size of the tuber. Cyclamen do not like large containers; the space between the tuber and the edge of the pot is preferably no more than 2-3 cm. It is important to ensure that the tuber rises 1/3 above the soil surface. Deepening leads to rotting, in addition, the formation fewer buds. However, if it is exposed too much, the tuber becomes woody, grows poorly and also produces few flowers.

To create optimal conditions During the development of the tuber, I cover it with a layer of sphagnum moss. When transplanting, I do not compact the substrate, but only lightly squeeze it and water it. To prevent fungal diseases, you can add Fundazol (2 g per 1 liter of water) to the first watering.

Fertilizers

The plant requires fertilizing, especially balanced fertilizers with microelements that do not contain chlorine (Belvito, Agricola). The quality of flowering is especially affected by iron deficiency. With potassium deficiency, young leaves become light-colored. Leaves also turn yellow due to a lack of boron. However, excessive doses of fertilizers can cause burns to the roots; seedlings are especially sensitive (for them I reduce the dose by half). Excess nitrogen can cause tubers to rot.

The diet depends on the growing season, soil type and stage of development of the cyclamen. It is important that the plants do not experience unnecessary stress. On hot sunny days, I reduce the dose of fertilizer by half. You can also use organic fertilizers - an infusion of cow manure (1:10) or bird droppings (1:25).

Rest period

It is traditionally believed that after flowering, leaf petioles and flower stalks should be removed and fertilizing should be stopped. However, after this procedure, a friend of mine grows new leaves at the same time that my plants are blooming.

Over 15 years of cultivation, my cyclamens have never completely shed their leaves; I do not send them to rest artificially. Usually, as soon as individual leaves begin to turn yellow, I reduce watering without letting the earthen ball dry out. I do not cut out wilted flowers or yellowed leaves, but very carefully pull them out, trying not to damage the growth zone.

I transplant into fresh substrate at the beginning of the dormant period. After some time, new leaves begin to grow, the roots of the cyclamen do not die off, but remain viable. At this time, I keep the plants in bright, diffused light.

Reproduction

Persian cyclamen is most often propagated by seeds. Such plants adapt better to the microclimate of the apartment. Let me remind you that seeds germinate in the dark.

I’ll dwell a little on pollination, which is carried out in the morning. The flowers should be fresh and the pollen should be bright yellow and fall off easily. Pollen ripens on the second or third day after the bud opens. It is advisable to pollinate for several days in a row. The structure of the flower does not allow the use of a brush, so the peduncle is clicked several times with a finger. After fertilization, the corolla flies around, the peduncle bends towards the edge of the pot, and the ovary hides under the leaves. The fruits set only in winter or autumn.

From the beginning of pollination to the collection of seeds, it is recommended to keep cyclamen in a bright place at a temperature of 18°C ​​during the day and 12-14°C at night. With this regime, it will take about 100 days for the seeds to ripen, and if you deviate from it, there will be fewer ovaries and it will take about 140 days. When the fruit turns slightly yellow and the peduncle becomes sluggish, the ripe box opens from the middle to the edges (it is better to remove it a little earlier and put it to ripen). There is an opinion that it is better to sow all the seeds, since often puny seeds and weak seedlings produce beautiful double forms.

I don’t propagate cyclamen by dividing the tuber, as it rots and dies (I had a sad experience).

Cyclamen is a very beautiful indoor room with a very beautiful flowers. It gives the home a cozy and well-groomed appearance also because it blooms in winter and autumn (October-March), when there is so little greenery. It is for this reason that many people prefer to choose this flower. In this article we will tell you how to water cyclamen at home, how often and with what.

Cyclamen is indoor flower, which reproduces by tubers. Flower growers very often breed two varieties - Persian and European. The Persian is slightly larger than its European counterpart. At the same time, one that is even more often found in homes is Persian cyclamen. Its flowers have all shades of red and pink, and there are also purple and variegated varieties.

Cyclamen is a fairly common houseplant, as it blooms very beautifully and does so all winter and late autumn. Precisely when there is so little greenery around.

Methods of watering home and garden plants - compare the differences

Garden plants can be watered in more different ways. For indoor plants, there are only three watering options. To water indoor plants, you can use the three most common options: using a small watering can, using a tray, and immersion watering.

The first method is the most common. Let's take a watering can with a fairly thin spout or a watering can with a special small hose. It is released along the edge of the pot where the flower is planted, and I water the flower in a circular motion. If you do not put the nozzle on the watering can, the water will splash in different directions and the soil will remain on the lower leaves of the flower. These leaves subsequently form brown spots. So experienced flower growers It is recommended to water geranium, balsam, fuchsia, anthurium, azalea, jasmine and indoor maple.

Watering through a tray is the most best option for cyclamen

The third way is immersion. Take pots in which flowers are planted and lower them into a bucket or other container with a large diameter. The water should not reach the top edge by about 3-2 centimeters. Flowers stand until the substrate in the plants is moistened. The most important condition- This is the fixation of the substrate before watering the plant. Before immersing the plant in a container, you need to put a circle of fine mesh on it. It is cut out in advance with a diameter equal to the diameter of the pot. An opening is also made into the mesh for the plant itself and secured using an elastic band. This type of watering can be used for ferns, orchids, azaleas, camellias and other plants.

To water garden plants, watering is used using a watering can, garden watering hose, or a special irrigation system. Watering methods are also varied - you can use regular water, or you can use rain water.

How to properly water different varieties of Cyalamen

Neutral water is the best liquid for watering plants. Water collected after rain and snow has this characteristic, as well as river water. The pH level in it is about 7. The most unsuitable on this list would be water from standing sources - a lake or a well.

For home flowers, the best option is water with a neutral environment. Most often this is water collected after rain or snow, or water from a river.

You can mix boiling water and cold water to water a flower if running water Previously it was cleared of chlorine. It is recommended to boil water taken from under the edge (it is very hard) and let it sit for at least 24 hours. The water is thus saturated with oxygen and potassium and magnesium salts fall as sediment to the bottom of the container. Before watering, carefully pour the water into another container, and leave the sediment in the used container. Cold drinking water it also needs to sit for two days to free it from chlorine.

If the water is too alkaline, it can be made to a neutral pH using these methods. First: add 0.1 grams to 1 liter of water citric acid; second: ascorbic acid in the amount of 1/3 tablet is dissolved in 1 liter of water; third: carefully add vinegar essence into the water drop by drop, constantly checking with litmus paper.

Features of watering Cyclamen after transplantation and during flowering

When watering the flowers, immerse their pots in a container of larger diameter. It is important that the water is at the level of the plant pot and does not reach 3-2 centimeters.

The flower is replanted immediately after flowering ends, this is approximately March. A few weeks before, reduce the amount of water that feeds the plant. Remove all dried leaves and replant. After transplantation, around the beginning of summer, the amount of water is increased. During the day it is recommended to spray the flower 2-3 times.

At the beginning of September, that is, a month before the start of the flowering period, if the root system has completely occupied the pot in which the plant is planted, it is again transplanted into a larger pot. The most important thing with this transplant is to deepen the root system. If replanting is not required in the autumn, the flower is simply moved to a bright and cool place in the home. Before this, the upper part of the root system is first cleaned.

During the flowering period, Persian cyclamen is watered abundantly, but there is no need to over-moisten the soil. During the period when the plant is not blooming, it is recommended to significantly reduce watering and simply not allow the soil in the flower to dry out. You need to water the flower very carefully and try to prevent water from getting on the top of the tuber and on the shoots. The plant may begin to rot if this happens. Use soft, settled water.

Tip #1. It may be advisable to pour water for irrigation first into the pan, and then water the flower with it.

Adding liquid fertilizers: analysis of brands, their advantages and disadvantages, how and when to water

All mineral fertilizers are divided into nitrogen, phosphorus, potassium and complex. Nitrogen, potassium and phosphorus are the main nutrients for indoor plants. Nitrogen fertilizers are used during the period of active plant growth to good growth and development of flowers and shoots. Potash fertilizers needed for plant growth. Complex fertilizers universal for all decorative flowers.

When preparing recipes, you need to know that simple and double superphosphates are poorly soluble, and nitrogen fertilizers are divided into amide, ammonium and nitrate based on the quality of nitrogen. Indoor plants are able to assimilate only the ammonium form and all other species are carried out to it using biochemical reactions.

Cyclamen Persianus is usually watered with liquid fertilizer about once every two weeks. Fertilizers promote proper flower development and beautiful flowering. Most often, complex mineral fertilizer or fertilizer is used for flowering plants. You cannot fertilize the flower during the dormant period.

If the leaves turn light green or yellow, then it is recommended to water the plant with iron chelate or spray the leaves. Liquid fertilizers for indoor plants are produced by the Agricola company. , Pokon, Garden of Wonders and Green World.”

Watering with various infusions: folk remedies, analysis of methods and recipes

Watering home flowers using various folk recipes has been used for quite some time. Read also the article: → "". Among them, the most common methods are to feed the flower with a solution with yeast, banana peel, sugar, succinic acid, wood ash and eggshell. Let's analyze the most common of them.

Preparation and use of yeast solution

Yeast is a fairly popular fertilizer among gardeners, prepared at home. This familiar product to all of us contains a lot of hormones, as well as cytokinins, which help accelerate cell division. Yeast also contains auxins, thiamine and B vitamins. Thanks to this, when adding yeast tincture, flowers grow faster and develop fully.

Experts have proven that tincture of their yeast enhances the mineralization process organic matter in flowers faster, reproduces nitrogen and phosphorus and increases the activity of microorganisms in the soil. Such fertilizing can partially replace fertilizing with mineral fertilizers for some time. The best option for this subcortex is about three times a year (immediately after transplantation, at the beginning of summer and autumn).

Tip #2. For the greatest effect from this procedure, we recommend adding a little egg shells, crushed into powder and wood ash to the yeast.

Here's one way to make nutritional yeast mixture:

• Take 10 g of dry yeast, 3 tbsp. l. granulated sugar.
• All this is diluted in 10 liters warm water. If you need a smaller volume, then 1 g of dry yeast, 1 tsp. sugar and 1 liter of water.

Wood ash for feeding

Wood ash for feeding indoor flowers is also a common option. The ash contains phosphorus, iron, sulfur, magnesium, potassium, zinc, and calcium. At the same time, potassium and phosphorus are easily accessible in it.

The recipe for liquid feeding is as follows:

• Take 3 tbsp. spoons of ash (approximately 25 g) and dissolved in 1 liter of warm water.
• The composition should be left for a week; it is recommended to water the flowers once every two weeks. Ash will benefit fuchsia, geranium, begonia and cyclamen.

Sugar cyclamen tincture

Sugar is an essential source of glucose for both plants and animals. In cyclamen, it performs the same functions and contributes to the production of energy in flowers in order to grow. An ideal material to stimulate the formation of organic molecules. But it is necessary to feed with sugar in the presence of a sufficient concentration of carbon dioxide. Effective microorganisms (EM, Baikal EM-1, Vostok EM-1) can provide such a concentration. If this is not done, rot and mold will develop in the roots of the flower.

Natsoika can be done this way:

• Take 1 tbsp. spoon of sugar per 1 liter of water.
• It is recommended to water the solution once every 30 days.

Dried banana peel as fertilizer

The peel from these fruits is a fairly well-known fertilizer for cyclamen and other house flowers. Most of all it contains calcium. The recipe is:

• Take fresh peel and rinse well with cold water. Let's dry it.
• When the peel is completely dry, it is put into a coffee grinder and made into a powder.
• It is poured into the soil and filled with water about once a month. It can also be mixed with soil when replanting in a ratio of 1:10.

Adding Water Retention Material to Soil: Advantages and Disadvantages

Faced with high content moisture in the soil, a person who grows indoor plants will probably think about what kind of water-retaining material to add and how to do it. Additives come in two main types: mineral substrates and organic substrates. Mineral substrates provide good soil moisture and prevent a crust from forming on it. The main substrates of this group are vermiculite and agroperlite.

Vermiculite– a mineral from the hydromica group, which has a layered structure with additional molecular interlayer water. This is expanded mica. Adding it to the soil mixture improves its structure and water-physical properties.

The main advantages of vermiculite:

• Plants are more resistant to low temperatures and lack of water. The flower is less susceptible to various diseases.
• Very good as a soil loosener. The soil does not crack, it is more dense and less crust forms on it. Seeds germinate faster as it is a plant growth stimulant.
• After using vermiculite, seedlings grow faster and are ahead of the same shoots by about 2.5-3 weeks. Vegetables ripen much faster. The fruits contain more, about 40-45 percent, protein, carotene and other needed by the body human substances.
• Helps keep the soil from drying out and keeps the plant warm in winter.

Perlite– rock glass of volcanic origin. The substance arose as a result of a volcanic eruption, namely at the edge of the collision of the volcanic mass and the earth. It crumbles into small balls and has the shine of pearls. That's why it has such a name. Perlite is a very effective soil additive for loosening it and also helps improve soil air circulation and moisture exchange. Organic substrates are mainly used for plants such as eggplants, peppers and tomatoes, which require a lot of moisture.

What can excess moisture lead to, how can you determine the need for watering by appearance?

Flower growers who do not have sufficient experience try to water flowers as often as possible. They do this every day and pour out quite a large amount of water. Excess moisture in the soil prevents oxygen from reaching the root system. The soil turns sour, the leaves turn yellow, the roots rot. In this case, emergency measures are taken to the plant. It is knocked out of the pot, planted in some container for a couple of hours to dry the soil, and planted again in a pot with good drainage.

If there is not enough water in the soil, then the leaves of the plant begin to wither and dry out without even turning yellow. Then it is recommended to water the plant in several stages, a little at a time, or place the container with the plant in water. You need to wait until the bubbles on the surface of the water disappear.

• Remember, the flower will be better off if you water it rarely, but a lot, rather than often, but little by little.
• The water in the pan should not stagnate
• It is best to check the soil moisture level by hand.
• The flower requires abundant watering during the period of active growth.
• Plants that prefer warm and bright rooms more moisture required

Automatic watering systems: analysis of brands, advantages and disadvantages

One of the most common atomic watering systems for indoor plants on the market is Rain Smart. The advantages of this system include the fact that it can easily automatically serve from 1 to 8 plants, watering through a tray is possible, is compatible with any container, does not require additional maintenance, and is resistant to power outages. The disadvantages of this system include the fact that it is designed for up to 8 colors; if you have more, you will have to install two or more devices and a tank of up to 10 liters, so you will have to calculate how long you will be absent and when to fill the container device.

One of the most common systems automatic watering indoor plants during holidays – container volume is approximately 10 liters

Ash	Content of main elements in%
	Phosphorus	Potassium	Calcium
Hardwood	3,5	10,0	30,0
Coniferous	2,5	6,0	35,0
Peat	1,2	1,0	20,0
Kizyak	4,8	11,3	8,5
Cereal straw	4,0-8,0	10,0-20,0	4,0-8,0
Buckwheat straw	2,5	30,0-35,0	18,5
Sunflower stems	2,5	36,0-40,0	18,0-19,0
Slantsevaya	1,5-1,5	1,0-1,5	65-80

Cyclamen or alpine violet- a fairly unpretentious perennial flower of the primrose family. Proper care, especially understanding how to water cyclamen at home, creating ideal conditions will allow you to admire long flowering. Unlike many plants, the dormant period begins in winter time, cyclamen begins to bloom from the beginning of autumn to the end of spring.

General conditions

The organization of watering cyclamen should be approached with special care: the plant bulb is prone to rapid rotting. When watering, follow the rule that it is better to underwater the plant than to overwater it.

The frequency with which water is added depends not only on the age and size of the pot, but also on environmental conditions - lighting, humidity, air temperature.

Water the plant when you are sure that top layer the soil at the depth of the phalanx of the finger is dry. If you follow the dryness of the soil on the surface, you can easily flood the flower. It is best to use humidity indicators. Today in garden stores you can find inexpensive specimens for 150-300 rubles.

VIDEO: What to do with a flower immediately after purchase

Water requirements

The water temperature should be equal to the environment. Before watering, the liquid must be softened: let it sit, boil, or use filtered or melt water.

For settling, tap water is taken and placed in a vessel with a wide neck. There is no need to close the container. Harmful and hardening substances will either evaporate or settle to the bottom. The liquid must stand for at least 6 hours. For irrigation, only the upper layers are used, for which they are carefully drained, trying not to touch the sedimentary layer.

It’s not for nothing that boiled water is called dead water. It is useless to water plants with it - it will not destroy the flower, but it will not help it in any way.

Filtration is a good procedure, but during the cleaning process, useful microelements are also lost.

Melt, rain and well water at room temperature are considered ideal for irrigation.

How to prepare melt water

In winter, you can melt snow or ice taken outside the city, away from traffic intersections, or freeze the water yourself. To do this, pour the liquid into a container, place it in freezer, or outside if the air temperature allows the water to freeze.

Freezing time depends on volume. Make sure that the water turns into ice by 2/3: in the middle it should remain liquid. There will be contained harmful substances, it cannot be used for watering.

Cyclamen watering frequency

The frequency of watering cyclamen depends on:

• the period in which the plant is located (rest, growth, flowering, after transplantation, etc.);
• pot size;
• conditions environment.

Features of irrigation in different periods will be discussed below.

Irrigation methods

Watering cyclamen can be done in two ways: from above and through a pan.

Watering from above:

• Take a watering can with a long spout, or a syringe if the pot is small.
• The water temperature should be equal to the ambient temperature.
• Water strictly along the edge of the pot so that no water gets on the bulb, otherwise the tuber will rot very quickly and the plant will die.

Watering through the tray:

• Pour room temperature water into the tray.
• After an hour, drain off the remaining water.

At this method Make sure the pot size, soil quality and other conditions are appropriate.

Flower care

The requirements for caring for cyclamen are low: a properly selected pot, soil, growing location, temperature and light conditions, sufficient humidity, proper watering, and disease prevention will allow the plant to bloom for a long period.

Capacity requirements

The plant does not like large pots. You need to select a container so that the distance between the walls of the container and the onion is no more than 3 centimeters. There must be a drainage hole at the bottom of the pot: the number and diameter depend on the size of the container. The height of the container should be such that there is a distance between the bottom and the beginning of the roots.

What should the soil be like?

The soil for cyclamen should be quite loose and contain a large amount of organic matter. Soil acidity - not less than 5.5, not more than 6.5 pH values.

Suitable for growing cyclamen:

• chopped straw cutting;
• fine peat;
• turf;
• leaf soil;
• sifted sawdust;
• humus.

For planting, the soil should be moderately moist: if you squeeze it in the palm of your hand, it should not stick together into a lump. The soil is pre-disinfected.

Methods for soil disinfection:

1. Calcination:

• preheat the oven to 80 degrees;
• pour slightly cooled soil onto a baking sheet in a layer of no more than 5 cm, after mixing it;
• cover with foil;
• place the soil in the oven for half an hour.

1. Freezing:

• place the soil in a sterile container: fabric bags, containers treated with bleach, etc.;
• freeze the ground;
• leave the soil frozen for a period of 3 to 5 days;
• move to a warm room for a week;
• re-freeze;
• repeat the cycle 2-3 times.

1. Steaming:

First way:

• take a large container;
• place a lattice or bricks at the bottom;
• fill the vessel with water to a level below the bricks or grate;
• place the earth on the bricks or lattice, after placing it in a fabric bag;
• close the container and steam the soil for 2 hours.

Second way:

• place the soil for cyclamen in a colander previously covered with a cloth;
• bring water poured into a large vessel to a boil;
• place a colander over the container so that the water does not touch it;
• reduce heat;
• Sterilize the soil for 30 minutes.

1. Processing with special means:

• 1% solution of potassium permanganate;
• antifungal drug;
• fungicide;
• foundationazole;
• Alirin and Gamair;
• insecticide;
• microorganisms.

Humidity, lighting and temperature conditions

For proper development cyclamen needs bright but diffused light. This can be achieved by shading the plant, for example, with tulle or blinds. Intense light can burn the leaves: they will turn yellow and fall off. Well suited for growing oriental and west side windows.

Cyclamen does not like heat; the ideal ambient temperature for growing it is 15 degrees Celsius. Maximum values: not lower than +10, not higher than +25 degrees.

The plant needs high humidity air. Not during the period of buds and flowering, spray cyclamen with softened water once a day. This should be done from above the flower so that large drops do not fall on the plant. Another way to moisten: Place the container in a container with wet stones so that the water does not touch the bottom of the pot.

VIDEO: General rules of care

Replanting cyclamen

Cyclamen tubers remain viable for up to 25 years. The age of the plant is determined by the size of the bulb: on average, it grows by 1.5-2 cm per year. It is advisable to replant the flower in July.

When transplanting, add drainage to the bottom of the container 5 cm, after making sure that there is a hole at the bottom of the container for water drainage.

As drainage you can use:

• expanded clay;
• synthetic material;
• crushed foam;
• coal;
• crushed stone;
• sand;
• gravel;
• crushed brick;
• vermiculite

Pour soil on top of the drainage in such an amount that after replanting, a third of the bulb is above the surface of the ground. Place the cyclamen tuber in the center of the pot and add soil. IN summer period Place expanded clay on the ground - it will protect the ground from excessive overheating. In winter, there should be nothing on the surface of the pot, otherwise it is impossible to control the condition of the soil.

After transplanting, place the cyclamen in a dark place. Water moderately after 2 days after the procedure. Fertilize the plant once every 14 days with phosphorus-potassium fertilizer.

Methods for propagating cyclamen

Reproduction occurs by bulbs and seeds.

Propagation by bulb

For propagation, the tuber is divided into parts during the period when the plant is dormant.

Division process:

• remove the onion from the pot;
• clean the tuber from the soil;
• prepare a sharp, sterile blade;
• cut the onion lengthwise into so many pieces that each contains a bud and roots;

Disinfect the blade after each cut.

• Sprinkle the cut area with crushed wood or activated carbon, or ash;
• then follow the same steps as when transplanting.

Propagation by seeds

When growing a plant from seeds, flowering will begin 1.5 years after planting.

Cyclamen seeds ripen in the seed box (see photo). They are scattered onto pre-moistened soil, sprinkled with a thin layer of soil on top, and covered with an opaque film. Shoots appear 30-40 days after sowing. Cyclamen is transplanted into separate pots when 2-3 leaves have formed.

You can grow babies from seeds

Fertilizing the plant

Cyclamen should be fertilized during periods of growth and inactive flowering. The frequency of feeding is once every two weeks in previously spilled soil.

When the plant actively develops leaves and seed pods, it requires mineral fertilizers. If the concentration of nitrogen in the fertilizer is too high, cyclamen will have abundant, good leaves, but it is unlikely to bloom. Fertilizing should be stopped when the plant begins to peak flowering.

Care during flowering

To ensure that cyclamen blooms for a long time, observe the following conditions:

• Provide cool ambient temperatures during the flowering season. If the room where the plant is located is hot, it will bloom in two weeks. For the same reason, never place a flower above a radiator.
• Air humidity should be high. Cyclamen itself, while it has flowers and buds, cannot be sprayed.
• Do not replant the plant during this period.

Caring for cyclamen during the dormant period

During the dormant period, cyclamen should be placed in a place with an air temperature of no more than 11 degrees Celsius. There is no need to water the plant at this time; in extreme cases, if the soil is very dry, no more than a tablespoon of liquid, no more than once a week.

Cyclamen does not like drafts, gas and tobacco smoke. Withered flowers and yellow leaves should be removed by unscrewing at the base. If there is a need to clean the leaves, it is convenient to do this with a soft brush.

Diseases - symptoms and treatment

Diseases can appear as a result of:

List of the most common cyclamen diseases:

Name of the disease	Symptoms	Treatment
Fusarium	Yellowed, wilting leaves, deterioration general view plants.	Apply a systemic fungicide to the root. Spray the plant above the tuber with Topsin-M. Remove all yellowed leaves by twisting them at the base.
Botrytis (gray mold)	The appearance of gray mold on leaves and stems. If you blow on it, it flies up. The affected areas begin to darken and die.	Remove infected parts of the plant. Reduce watering. Ventilate the room, avoiding drafts. Treat the plant with a systemic fungicide.
Anthracnose	The buds stop developing, the leaves curl or dry out.	Reduce humidity levels. Treat with fungicides 3 times. Remove damaged leaves and buds.
Rhizoctonia, pythium and other root rots	The leaves turn pale, some of the roots dry out.	Water the soil with a systemic fungicide. If the first method is ineffective, the plant should be transplanted into another soil, after removing the infected areas.
Wet rot	Wilting of the plant, smell of rot from the bulb.	There is no treatment, the plant must be destroyed.

Disease Prevention

To prevent cyclamen diseases, do the following:

• before planting, sterilize the soil and the pot, if it is not new;
• follow the rules of watering and caring for the flower;
• periodically inspect the plant, especially in winter;
• Do not use highly concentrated nitrogen in cyclamen fertilizer.

To prevent diseases, it is useful to treat cyclamen with a solution of garlic or onion.

Solution recipe:

• finely chop the garlic cloves or onion;
• for the solution, use half a teaspoon of the mixture;
• pour a glass of water over the garlic or onion;
• let it brew;
• store the product in the refrigerator;
• for processing, take 2 tablespoons of solution per liter of water.

Objectively, this flower is considered one of the most demanding to care for. Difficulties are encountered literally at every step, this is especially common among beginners, someone who has just become the owner of this plant. But if you learn to care for it properly and avoid annoying mistakes, cyclamen will return your attention a hundredfold with its beauty and long color.

VIDEO: Secrets of caring for cyclamen