Even if you accurately calculate the parquet board or parquet needed for your rooms, there will still be leftovers. Are there any unused parquet floors left after the renovation? Set them aside in the pantry. Let's say one of the parts is cracked or hopelessly damaged by some caustic substance. The die needs to be urgently replaced.

The floor is laid so that the damaged board can be removed without damaging adjacent tiles. A couple of pieces saved “for a rainy day” Necessarily will come in handy.

Another option is to contact our company and offer to buy out the remaining balance. Sometimes this is an essential necessity for us. The main thing is to keep the receipt and packaging from the batch.

Below are practical examples of what can be made from parquet. with my own hands. You will need a minimum of tools and materials. The main thing is a creative approach and attention to the needs of your home.

What kind of home furniture can be made from parquet?

A good way to use loose floorboards is in furniture doors. Give old cabinet furniture new life. For example, cover it with laminate.

Oak is resistant to changes in temperature and humidity. Narrow cabinets for small items can be easily assembled from parquet.

An effective method for attaching them is with a glue that is water-resistant and suitable for wood. A good brand of polyurethane compound is quite suitable. After the parts are glued, the seams need to be additionally coated, sanded after drying and the parts coated with waterproof varnish.

The practice of our clients shows that it is possible to make useful and original things for the home from parquet.

Below is advice on how to assemble a cabinet from parquet on a balcony or loggia

You will need about 8 squares of parquet.

The cabinet will look very impressive - “oak-like”.

It goes without saying that it is better to lay out facades using tiles. The height of our loggia is 1.6 m. We decided to make the bottom of the furniture along the entire width of the balcony. The height of the cabinet was planned to be 1.1 m.

Between its end and window frame left a small space for a natural niche - i.e. bottom part the cabinet is one compartment wider than the top ones. The shelves were assembled from wooden lining. Several meters of polished timber will be needed for the frame - crossbars, racks.

For each shelf you need four crossbars - two transverse and two longitudinal. One of them additionally serves as cladding for the front end of the shelves. 5 mm fiberboard or plywood is suitable as a base for the door.

The dies were glued on, then each door was framed with plastic molding. Before laying the parquet flooring on the base, indentations along the width of the frame were marked.

I was pleased with the constructive solution: now our loggia is decorated with a full-fledged, spacious closet.

Let me clarify that the parquet cabinet on the balcony very successfully covered the ugly balcony slopes, on which the plaster very often flies off due to temperature changes. Now they are not visible. And before they looked the same as on the page with photographs showing similar plastering of slopes. Just pleasing to the eye...

It can also be made from parquet board. Do you think that parquet and parquet boards are the same thing? Not at all. Read about the differences between parquet and parquet boards.

Home garden, kitchen and... poultry house made of parquet

The simplest use of leftover laminate is in boxes for seedlings. WITH inside they need to be protected with oilcloth, since the laminate will not withstand prolonged interaction with moisture.

If you slightly reduce the thickness of the parquet using a hand-held power saw, you can assemble kitchen hot pads. As an option - small square cup holders.

Another family is sure that parquet can be made into an excellent refuge for birds.

Over the course of several evenings, as many as 4 birdhouses were collected. It took a couple of packages of acacia parquet 30 x 5.5 x 2.2 cm.

Dies glued together with PVA into boards the right size, fastened with self-tapping screws in several places. If the glue suddenly becomes soggy, the bird house will not fall apart. The only problem was the natural hardness of acacia. Before screwing in the screws, I had to drill holes with a drill.

If you have not figured out where you can use leftover parquet, then contact our company for a free consultation on this issue.

October 30, 2016
Specialization: master of internal and exterior decoration(plaster, putty, tiles, drywall, lining, laminate and so on). In addition, plumbing, heating, electrical, conventional cladding and balcony extensions. That is, renovations in an apartment or house were done on a turnkey basis with all necessary types works

I suggest you find out how you can make a solid wood tabletop at home without complex carpentry equipment ( circular saws, grinding machines and surface planers). Of course, you will still need a power tool, but most hobbyists have such a set - they use it for small household needs. Therefore, stay with me on this page.

Solid wood table top

Material selection and tools

The selection of materials will be small, but, nevertheless, it is better to do this in advance so as not to be interrupted from the work process:

• in this case, to make the tabletop we will use pine board 100x2500x30 mm. Even though there are 9 of them in the top photo, only 8 will be used for the final result;
• strips for temporary fastening of any thickness(3 pieces) and screws;
• wood glue or PVA;
• nitro varnish for wood impregnation(colorless any brand);
• parquet varnish for finishing surface(in this case, Alpina varnish will be used).

From the tool we will need:

• tape clamps (they can be replaced with strong rope);
• electric or cordless drill (you can even use a screwdriver);
• disc or belt sander;
• brush for applying glue;
• brush for applying varnish.

Rough work - making furniture panels

To create a shield we will need:

• determine the future width of the tabletop relative to the width of the boards that are available;
• choose the best of them (without fungal infections and rot, wane and cracks);
• lay them out on the surface, selecting the front side according to the quality of the material;
• there will be at the junctions large gaps, but don’t be upset about this - all the unevenness will be leveled out when you tighten the shield with clamps.

When you have laid out the boards and are sure that they are completely suitable for you, place them on edge (as in the top photo) and spread them liberally with glue. In this case - PVA glue. Don't worry if the glue starts to bleed - it won't matter as you will still have to sand the surface.

Despite the fact that drips are acceptable, it is undesirable for the PVA to be too sparse, since it will practically not linger on the surface.

The boards are smeared with glue on only one side, and as soon as we do this, we immediately place them flat, forming the future tabletop. If during installation you notice that it is better to unfold or turn over any of the boards, do this, just make sure that all joints are coated with glue. Also now you can still add or subtract the number of boards on the shield, that is, while it has not yet been pulled together.

After approximately shaping the tabletop (moving the boards and trimming the ends), stepping back half a meter from each edge, we put band clamps on the backboard. This is a very powerful tightening agent that can leave a dent on the board, and to prevent this from happening, a board is placed on each side, laid on edge - they are clearly visible in the photograph.

Then the screeding of the structure gradually begins - on band clamps There are special handles that rotate the worm gear, tightening or loosening the tape.

Since we are using a non-profiled board, it is quite natural that the plane of the shield, when tightened, will have differences, that is, one board will turn out higher than the other, especially at the edges. Therefore, as you tighten the clamps, you need to align them by pressing your hand on the tubercle. But if that doesn’t work, then you can knock out the protrusion with a mallet or a plumber’s hammer, only through some kind of lath or board, so as not to damage the surface.

But for such a long board, two clamps are usually not enough - of course, it largely depends on the board, however, most often this is the case. Therefore, the missing clamps can be replaced with a sling or a nylon or mylar cord. Everything is very simple here - a loose loop is made around the tabletop, tied at the top, twisted in a figure eight and a stick is inserted into the upper hole, which serves as a collar for - this is shown in the photo above.

For PVA, it is advisable to keep it at room temperature for a day for complete drying. But if necessary, the clamps can be removed after 5-6 hours.

Final stage

If you think that the glue has already dried, you can free the shield from the clamps for further processing.

But if less than a day has passed, then it’s better to play it safe and screw three planks on the back side of the tabletop, securing each board. But screwing screws into the edges of the plank is risky, as it will split, so you need to drill holes there first. Make sure the length of the screws is correct so that they do not come out on the front side.

No matter how you level the boards, the surface will still remain rough, and in some places there will even be mismatched edges. Therefore, the glued shield should be sanded with a disk or draw machine. The edges around the perimeter are also subject to grinding and rounding.

The ends will also be uneven, therefore, using a construction square (you can even use a school triangle), draw lines along the edges on both sides. Then the excess is cut off manual circular saw and polished.

It is best to use nitro varnish as the first layer - it is cheaper, and wood absorbs this composition into the pores very well, therefore, much less paintwork and varnish will be spent on the second layer.

In addition, after the varnish dries, and this will happen in 40-60 minutes, the wood fibers will rise and you need to sand the surface again, but this time by hand. After this, cover the tabletop with parquet varnish 2-3 more times, only here the drying of the layer lasts for 4-4.5 hours.

After each layer of parquet varnish, check the surface for roughness and, if necessary, repeat the manual sanding cycle.

Conclusion

You can make a tabletop like this in 2-3 days, and even then, the time spent will be spent more on drying the varnish. You don't have to make such a long shield - in any case, you should start from the need.

If after renovation you still have parquet boards, then this article is for you. Today we will tell you what you can make from leftover parquet for your home and garden. Unfortunately, no matter how you calculate the exact number of parquet boards for rooms, there will still be a surplus. Don’t rush to throw them away, but hide them in a secluded place, because even if everything was done well, over time one of the parquet parts may crack or deteriorate under the influence of a caustic substance, and this is where a couple of dies saved for a “rainy” day will come in handy. And we, in turn, offer you several ideas that will help you use free boards for creative design dwellings.

DIY parquet furniture - ideas

A good way to use parquet is to make furniture yourself. To do this you will need a minimum of tools and materials.

Here are just a few ideas of what you can make from leftover parquet:

• Cover old cabinet furniture with laminate and give it new life.
• Narrow cabinets for small items are very easily assembled from parquet. Oak has excellent resistance to temperature and humidity changes, so you can use cabinets on balconies and loggias. Below we will tell you how to make such furniture.
• Trays for armchairs and sofas. The tray can be placed on the wide armrests of the sofa and chair in order to place a cup of coffee, a glass of juice, a book, fold remote controls and mobile phones. The tray can also be used for the bath. And it is not at all necessary that the board be made of oak, since it can always be painted to match the color of the furniture and then covered with parquet varnish.
• Shower bench.
• Boxes for seedlings. This is the simplest use of laminate leftovers. The only advice: protect the boards from the inside with oilcloth, since laminate cannot withstand prolonged exposure to moisture.
• Ceiling lamp.

Important! It’s not so important what you decide to make from the leftover parquet, take note of these useful tips:

• To attach the boards, use a water-resistant adhesive suitable for wood. Use a good brand of polyurethane compound for this purpose.
• After gluing the parts, additionally coat the seams.
• After drying, wooden boards sand and coat with waterproof varnish.

How to make a cabinet from parquet?

To make furniture you will need:

• About 8 squares of parquet boards. The facade of the cabinet itself is laid out with dies.
• Sanded timber (several meters) for the frame. Crossbars and racks are made from it.
• Wooden lining for shelves.
• Plywood or 5mm fiberboard for doors.
• Plastic molding for framing.

Important! Furniture can be made across the entire width of the balcony. The height of the cabinet can be 1 m or higher, it all depends on the amount of material and your wishes.

The procedure for making a cabinet from leftover parquet is as follows:

1. Make a furniture frame from timber. Each shelf requires four crossbars: two longitudinal and two transverse.
2. Assemble the shelves from wooden lining.
3. Make cabinet doors.
4. Based on the furniture, make markings for indentations along the width of the frame.
5. Place the dies on glue and cover the base of the furniture.
6. Frame each door with plastic molding.

Important! A full-fledged and spacious cabinet made in this way will decorate the loggia, cover all defects in the balcony slopes and will for a long time please the eye.

What can be made from the remains of parquet: crafts

We invite you to creatively decorate your home and dacha with the remains of parquet by making small crafts. Here are just a few ideas:

• If you have a hand-held power saw, you can slightly reduce the thickness of the parquet and assemble hot pads.
• Another option is small square cup holders.
• Tray.
• Boxes for flowers.
• Windmill for decorating the interior or summer cottage.
• Birdhouses. Parquet will make an excellent refuge for birds. Glue the dies with PVA into boards of the required size, then fasten them with self-tapping screws in several places. Even if the glue becomes soggy, thanks to the self-tapping screws the house will not fall apart.

Original parquet board tray

You can make a convenient tray with your own hands. If your chair or sofa has a wide armrest, then this idea is just for you.

To work you will need:

• Parquet board.
• Wooden slats.
• Chipboard or MDF sheet.
• PVA construction adhesive.
• Workbench.
• Tools for working with wood.

Procedure:

1. Determine the size of the tray by measuring the armrest of a chair or the width of the bathtub.
2. Glue the dies together.
3. Trim the parquet along the edges.
4. Cover the sides of the canvas with wooden slats.

The tray is ready! Now you can install it on the armrest upholstered furniture or use in the bathroom. You can put a cup of coffee on the tray and enjoy life.

What can be made from parquet: crafts for decorating a site

No less useful application wood, if you need to figure out what can be made from the remains of parquet - this is a fence flower beds and decoration of various areas garden plot. Here are just some ideas:

• From any leftover laminate, even varnished, you can make an original fence for garden beds and flower beds. Everything looks neat and stylish. The planks can be placed in the form of sharp-angled arrows or a palisade. The basis of the structure can be ordinary bars to which the parquet flooring is attached. And the bars can be supported on metal pins or wooden stakes, driving them into the ground 15-20 cm.
• You can also use dies to make paths between the beds. The main advantage is that grass will not grow under the boards, which means there is no need to weed it.
• Garden paths can also be laid out from old parquet or its remains. From the dies you can lay out various designs and geometric shapes.

Technology for creating garden paths

Decorate garden paths You can easily use leftover parquet. Proceed as follows.

Parquet is a durable and durable flooring option, which is why it is often preferred. The easiest way is to buy the material in a store, but some craftsmen decide that making parquet with their own hands is not a waste of time, but an opportunity to get an environmentally friendly and high-quality coating.

Indeed, you can make parquet yourself, but how expedient will these actions be? In order to understand this, you will have to understand with examples how this is done.

One Russian family in the early 2000s was able to obtain about 4 pallets of small mahogany and oak bars. And at the same time they became the owners of an apartment that needed major renovation, since it had only bare walls and ceilings. The family decided to do all the finishing work themselves and came to the conclusion that they could make wood material parquet. The idea was crazy, but what do difficulties mean to the hardworking and determined?

Is it possible to make parquet with your own hands?

As a base for the parquet, they made M-300 sand concrete - thus, they were able to eliminate the unevenness of the floor, the differences of which ranged from 3 to 12 cm throughout the apartment. Next on bitumen mastic they laid OSB sheets, additionally secured with dowels. The choice fell on OSB, because this material is very durable and not afraid of moisture. Next, the slabs were covered with a special primer.

Note! To make parquet with their own hands, the family used available tools and the material itself, which miraculously fell into their hands. However, parquet made independently at home can only be made without locking joints, which increase the solidity of the coating. This can be a massive or stacked version of the material. Such parquet can only be fixed to the floor using glue.

Parquet cutting was carried out using stationary circular and cross-cut machines. The resulting slats had to have the same size - in that case it was 10x70x500 mm. The moisture content of the wood should be low - about 9%.

The finished boards were fixed to the base using the usual. At the same time, sometimes it was necessary to individually adjust the planks to each other. After installing the floor, the parquet was sanded and the gaps were puttied acrylic composition woodworking, sanding and varnishing.

Master class. Self-production parquet floors with heating system. Downloadable file (click the link to open the PDF in a new window).

Laying the manufactured parquet

Laying self-made parquet is done in almost the same way as installing regular store-bought material. Let's look at how this process happens in practice.

Step 1. First, the base is prepared - it must be perfectly flat, since the parquet will be fixed using an adhesive composition. To do this, first, if necessary, it is made cement screed from concrete grade minimum M250. If old screed well preserved, it must be cleared of debris and primed with epoxy. In this case, plywood is used as a base directly under the parquet. Its sheets are cut into equal-sized squares. The thickness of the plywood should be about 12-18 mm. The squares will have dimensions of 50x50 or 75x75 cm. For convenience, appropriate markings are applied to the plywood sheets.

Advice! If the screed is made from scratch with your own hands, then it is important not to forget to lay the waterproofing material.

Step 3. The next stage is laying the plywood on the base and fixing it. Installation of individual elements is carried out staggered, that is, the seams should not be joined at one point. There is a gap of about 2-3 mm between the individual sheets. The base is coated with adhesive mastic, after which the sheets are laid and screwed for additional fixation to the floor using dowels or screws (depending on the type of base - wood or concrete).

Step 4. The plywood is sanded using a special machine.

Step 5. For convenience, markings are applied to the plywood along which the parquet will be laid. It is applied in accordance with the selected pattern.

Step 6. Next, the base is gradually coated with a special glue, which is applied using a notched trowel. It is on this glue that the parquet boards are laid one at a time. They are pressed tightly to the base, and the gaps between the individual elements should be minimal. While the glue dries, the parquet can be pressed down with a weight.

Step 7 Likewise the entire subfloor is covered. Next, the parquet is sanded.

Step 8 The last stage is varnishing the parquet flooring.

Advice! You can close the joint between the parquet floor and other coverings at the exit from the room using a sufficiently wide aluminum threshold.

Video - How to lay parquet?

Making such a floor yourself is extremely simple. To do this, we cut these wooden triangles. The degrees of angles are indicated in the figure. This element is good because it can easily form a beautiful and at the same time beautiful pattern.

Working with artistic parquet

Sometimes craftsmen decide to take a completely desperate step and make artistic parquet with their own hands. This is also a type of parquet flooring, but the materials are laid in a special way. In this case, the design is made from several types of wood, and may also have patterns made separately.

Note! Artistic parquet was first used for flooring back in the 16th century. Its production was considered a very complex process, and therefore the labor costs were equal to those required when weaving expensive carpets. Such parquet was used only for decorating halls in castles, palaces, and houses of the nobility.

But even today, artistic parquet has not outlived its usefulness, although it continues to be a very painstaking type. self made, that's why it's very expensive. The work is difficult because it requires attentiveness, a sense of taste, responsibility, the right choice materials - everything, even the most seemingly insignificant properties of the wood used, must be taken into account.

Techniques for making artistic parquet

For making artistic parquet Usually they use types of wood such as oak, ash, maple, walnut, etc. The denser the material is used, the longer the floor will last, it will be easier to repair if necessary, and it will be faster to work with such material. The beauty of the finished drawing will also depend on how the wood was processed. For example, cutting a log can be done in different ways and this will also affect the appearance of the floor.

Prices for Papa Carlo parquet

Papa Carlo parquet

Note! For artistic parquet, cross-cut wood is usually used.

Table. Options for artistic parquet designs.

Name	Description
	In this case, several types of planks are used to create a pattern, which, after processing, are attached to the base board. The most popular option for making a drawing.
	The finished drawing is placed deep into the base. Materials such as metal, amber, and mother-of-pearl can be used for decoration. Less durable option artistic parquet, but more expensive.
	In this case, the pattern is created by cutting grooves for the design, which itself is made of dark wood. The method is very ancient and is now practically not used.

Also parquet flooring can be laid with a “rosette” (the parts have an oval or round shape, located in the middle of the pattern), a “border” (a part of the floor with a certain motif that divides the space of the room), modules (in this case, the parquet is assembled from separate panels - original geometric shapes are obtained compositions).

Advantages and disadvantages of artistic parquet

It’s not for nothing that artistic parquet is still valued today. It has a number of advantages:

• durability due to the use of hard wood;
• environmental friendliness;
• excellent thermal insulation performance;
• beauty and originality;
• the ability to create your own pattern.

Disadvantages include high cost, difficulty in manufacturing, low resistance to frequent and strong mechanical stress.

Making artistic parquet at home

The high cost of this parquet and at the same time the desire to still make such floors force home owners to try making this parquet with their own hands.

Step 1. The first step is to draw up a design project, which will mark the dimensions, the place where the pattern was created, as well as the main pattern of the parquet.

Note! Work should be carried out at a temperature of +17-23 degrees, humidity - about 40-60%.

Step 3. Using the templates laid on the floor, the future pattern is milled into the parquet base.

Step 4. Unnecessary elements are removed - gaps appear for the installation of artistic details.

Step 5. The finished gaps are cleaned of any resulting dust, sawdust, or wood chips.

Step 6. According to the sketch from pieces of wood different types details of the pattern are made, which are then glued into the main parquet in previously prepared places. Gluing is done on adhesive composition, intended for parquet. A hammer can be used to force the parts into place.

Step 7 The entire picture is inserted in the same way.

Step 8 Parquet floors with a finished pattern are sanded with a special machine.

Step 9 A primer coat of varnish is applied. It is spread over the surface with a spatula evenly and without leaving empty spaces.

Step 10 Varnish coating After drying, it is sanded using a special machine.

Step 11 The floor is cleaned of dust with a vacuum cleaner - preparation is made for applying the final varnish layer.

Step 12 The final coat of varnish is applied with a roller, and hard to reach places and along the walls - with a brush.

Video - Making palace parquet

Brushed parquet boards - what is it?

At home you can make the so-called brushed parquet. This is one of the new technologies for creating artificially aged floors. The material is subjected to special processing, during which it acquires the original appearance. By the way, this processing method can significantly increase the service life of the parquet base.

Aging of wood occurs through treatment with a hard metal brush, which removes the soft fibers of the boards, while the hard ones remain in place. This way, the textures on the wood will be clearly visible, and if you cover them with oil, the natural beauty will become clearly visible.

After the soft wood fibers have been removed, the boards are covered with a patina (special paint), which helps make the structure of the wood more obvious, emphasizes its porosity, or other materials. Also, the boards can be tinted - that is, the wood will change its color by a couple of tones. Usually it becomes somewhat darker than it was. Wood can be coated with varnish, wax or oil.

How to make brushed parquet with your own hands

To make brushed parquet you will need a grinder, a saw, a drill, a hard metal brush attachment for a drill, and a stripping router (it is not cheap, so it is best to rent it). Next comes the brushing process: the wood is cleaned of soft fibers thanks to the metal brush. This process gives it texture.

Advice! To reduce dust in the air, you can wet the wood with water before processing. However, before the next stage, the material must dry well.

To get rid of wood fluff formed during the aging process, the board is treated with a polymer brush with a grain size of P80-P120. At the last stage finishing material for the floor is polished.

Polymer brushes - end and radial

You can make parquet with your own hands, but all of the above procedures are quite time-consuming and will take a lot of effort. How advisable is it to tinker with such parquet? It is impossible to give a definite answer. However, in modern world With its constant rush and lack of time, this type of work is performed either by specialists or enthusiasts.

The coatings have earned special respect from consumers. They are valued for their natural and attractive appearance, reliability and durability.

However, even with the most careful treatment and proper care there comes a time when old parquet needs to be completely replaced or repaired. To carry out this work, you can hire specialists, or you can save money and do all the work yourself.

We will look at how to dismantle the old coating yourself and whether it can be restored to its original appearance in this article.

Determining the scope of work

Depending on the nature and extent of damage to the old coating, the scale of repair is determined. If the old parquet is very worn out, the boards have a large number of cracks, darkening and chips, it must be completely dismantled.

If defects appear only on some elements of the coating, the strips can be carefully removed and replaced with new ones.

If the boards are fairly well preserved, but have unsightly scratches, chips, and the floors themselves have begun to creak unpleasantly, then you can do without dismantling. In this case, it is enough to restore the parquet and make minor repairs.

Situations also often arise when the coating has not yet lost its presentability, but the owners of the room decided to change the decor and change the floor covering. In this case, you can very carefully remove the expensive material and put the old parquet in another room.

We will tell you below how to do the job correctly in each of the above cases.

Preparing to remove parquet

Before proceeding with dismantling, the room should be cleared of furniture. Don't forget about your own safety. It is necessary to prepare thick clothing, protective gloves and a hat in advance. If there is wiring in the area of ​​the baseboards, the room must be de-energized.

During the work you will need the following tools:

Hammer;

Hatchet;

Chisel;

Circular saw;

Degree of difficulty this process will depend on the type of parquet (slatted, piece, panel) and the method of its fastening at the base (using nails or glue).

Complete dismantling of block parquet

If the old parquet is presented in the form of piece strips that are attached to the base with glue, it will not be possible to remove it carefully. In such cases, the boards split and become completely unusable. Modular and plank decks are much easier to remove.

Dismantling process piece parquet includes the following actions:

1. Using a crowbar, all skirting boards are dismantled.

2. The covering is tapped with a hammer, and from those places where the sound from the impact is duller, they begin to dismantle the parquet.

3. If the dies are fastened with nails, the work is done with a nail puller, and if the planks are fixed with glue, an ax and a crowbar are used for the work.

4. Tightly glued elements can be removed using a hammer drill with a flat nozzle. In this case, it is necessary to protect your eyes from splinters by wearing safety glasses.

Removing parquet boards and modular coverings

Very similar to the process. The elements are attached using special locks, so all you need to do to dismantle them is to carefully snap out the fastening grooves.

In this case, no damage is caused to the coating, so it is quite possible to reuse it. For example, in rooms where old parquet can be laid.

Dismantling the modular flooring also does not require much effort. Here it is only important to determine on which side the elements with an open ridge are located. Since the installation of such a covering always starts from the window, it is more logical to start dismantling from the opposite wall.

The corner module is pryed off with a crowbar and torn off from the base. If nails were used, they are first removed.

Many people are interested in the question: how to remove old parquet if it is fixed with resin? In this case reverse side The module must be carefully cleaned of glue using a hatchet.

How to carry out partial parquet repairs

During the operation of such a coating, the planks may dry out and lag behind the base.

In such situations, you can do without complete replacement flooring by repairing the old parquet.

To do this you need to do the following:

1. The old varnish must be completely removed to reveal all the loose elements.

2. Severely dried dies, with a distance of more than 5 mm between them, are removed and replaced with new ones. To dismantle unnecessary elements, they are split into chips with a chisel.

3. To install a new die in an empty space, cut off the protruding tenon from it. The base is covered with glue, after which it is laid (at an angle). new element so that its groove fits onto the tenon of the adjacent plank.

4. If the cracks are small, glue is poured under the board. This area is pressed down with a heavy weight and left overnight.

5. The restored flooring is sanded and varnished.

Color restoration

Under the influence external factors covering from natural wood gradually loses its attractiveness, begins to fade and darken. However, this phenomenon can be easily eliminated; it is enough to just slightly restore the old parquet. A coating that does not have major mechanical damage is easy to repair and does not require large expenses.

To do this you need to do the following:

1. Using grinding or scraping equipment, the varnish is removed.

2. The surface is cleaned of dust, small cracks and cracks are puttied.

3. If the owners want to change the shade of the coating, at this stage the floor is covered with stain of the desired color.

4. Using fine-grit sandpaper, the decking is sanded again. This is necessary to eliminate chips and darkening.

5. Smooth surface cleaned and treated with 1 layer of primer varnish. After this, the floor is sanded again sandpaper and again varnished. This treatment can be performed up to 9 times until the surface becomes perfectly smooth.

6. After applying the final layer of varnish, the floor is left to dry (for 3 days). There should be no drafts in the room, high humidity and sudden temperature changes.

Removing scratches

Scratches are the most common defect in hardwood floors. If they are not very deep, they can be easily eliminated using a parquet repair kit or special wax pencils. But what to do if the old parquet is covered with deep and numerous scratches? In this case, you won’t have to lay a new coating, but you will need to spend time and effort to repair the damaged one.

In order to remove deep defects, the parquet must be completely cleaned of varnish and using scraping machine remove the damaged layer. This cannot be done in one go, so you need to be prepared for several treatments.

What to do if the floor begins to creak a lot

Old parquet flooring can start to creak for several reasons:

If voids have formed under the planks;

If the spacer wedges are sagging;

If the slats are loose.

To find out the reason, first of all, the baseboards are removed and the wedges are inspected. They may dry out, as a result of which they will no longer perform their functions. New wedges are installed in their place and the sounds of the floor are observed for a week. If the squeaks do not disappear, the problem is something else.

If certain elements creak, this indicates that a void has formed underneath them. Then a hole is drilled in the center of the plank through which glue is poured under the plank (until it stops being absorbed). This area is pressed down with something heavy and dries for 3 days. When the mixture has completely hardened, the hole is completely filled with putty.

If creaking is observed throughout the flooring, the above methods will not help. This defect can be eliminated by completely re-laying the parquet.

As can be seen from all that has been said, during operation, parquet flooring gradually loses its original qualities. However, they are very easy to repair, so any acquired defect can be removed and you can continue to enjoy the beauty of the natural coating.