The desire to improve a suburban area is quite understandable and natural. A do-it-yourself tire pond is one of the options to make the yard of your dacha or home cozy and attractive. Making a miniature pond is simple and interesting. This structure does not require much space. Anyone can make a pond in their dacha. To do this, there is no need to involve heavy equipment and hired workers. There will be an artificial pond great addition to such landscape elements as garden arches, paths, flower beds and gazebos. There are many materials for making a pond, but the most affordable and easiest to make is a small lake built from car tires.

Don’t rush to throw away old tires, they can be used to make original jewelry for a summer cottage: animal figurines, chairs, swings and even small pond!

Opting for old tires

The idea of ​​setting up an artificial pond on the territory of one’s property is visited by almost every property owner. This is a swimming pool for hot weather and a relaxation area for adults. Many people are put off by the high cost. finished products. Not everyone is ready to take on self-construction containers made of concrete.

Using old tires, you can quickly and easily create a beautiful pond.

First of all, it is necessary to assess the condition of the site. The dimensions of the products that will be used in work will depend on its size. If the area is large, then it is quite possible to plan the construction of several ponds from old wheel tires. To arrange a reservoir, you must choose a flat place where there are no large boulders, tree roots or communications. This will allow construction to be carried out without complications and undesirable consequences in the future.

When planning the arrangement of an artificial reservoir, it is necessary to provide for such nuances as:

1. Pond type. It can rise above the ground or be buried.
2. Exterior design. As a rule, to imitate a natural environment, they are used natural stone And granite chips. Care should be taken to find these materials in advance.
3. Water supply. The finished container will have an impressive volume. It is necessary to consider the issue of a stationary water supply or a long hose for replenishing liquid.
4. Drainage. Regardless of whether the pond is used for swimming or for purely decorative purposes, water will splash or pour out of it. It is necessary to provide for the drainage of this water to prevent the formation of dirt near the object.
5. Flora and fauna. A good idea is to populate the pond with fish and waterfowl. Plants look good both on land and in water.
6. Lighting. It is necessary to illuminate the pond not only for decoration purposes, but also for safety. In complete darkness, there is a high probability that an adult or child could fall into it.

In addition, it is worth considering equipping the pond with a light canopy, bench or chairs. Thus, a water feature made from an ordinary tire can become a semantic center for the whole local area, where residents can have a pleasant time.

Return to contents

Tools and materials required for work

The main object around which all construction will revolve is the tire. It is advisable to choose this product for the yard large diameter. For the finished pond to be functional in every sense, a tire with a diameter of 120 cm or more is required. You can use wheels from KamAZ, BelAZ or large wheeled excavators. You can find them at landfills, stations maintenance or in quarries. As a rule, you do not need to pay for tires. Its owners will gladly give away an item that needs to be disposed of for a lot of money. You can deliver the tire to the site using a dump truck or tow truck with a manipulator.

To work you will need the following tools and materials:

• shovel;
• metal hacksaw or jigsaw;
• building level;
• roulette;
• cord;
• wooden stakes;
• one or more tires;
• sand;
• gravel;
• waterproofing sheet;
• large stones for decoration.

Tires must be carefully prepared for use. From their surface you need to remove all mechanical objects that could get stuck in durable rubber. The product must be cleaned of dirt and washed with warm soapy water.

To create a waterproofing layer, you need to purchase dense polyvinyl chloride fabric. It is durable, resistant to high and low temperatures. The service life of PVC film is 10-15 years. Regular polyethylene can tear or fray within a few months.

Return to contents

Laying the tire in the ground

Before digging a pit, it is necessary to take measurements from the wheel. The hole should be 20 cm larger in diameter. This is necessary to secure waterproofing material. To prevent debris from entering the pond, its edges should rise above the ground. Based on these indicators, the diameter and depth of the pit are outlined.

After marking the ground, work is carried out in the following order:

1. Cut off from a tire side part. This can be done with a saw or jigsaw. The edges need to be aligned. If necessary, they can be covered with rubber or flexible plastic. This will protect the waterproofing from cuts.
2. A hole is being dug. Its bottom must be carefully leveled. If this is not done, then finished design will look unaesthetic. Water will constantly pour out from one edge.
3. The bottom of the pit is lined with small pebbles and compacted. A layer of sand is poured on top. It is leveled and moistened with water. Yes, it turns out solid foundation for a mini pond.
4. The tire is placed in the hole. It is aligned horizontally. Small pebbles or sand are poured into the bottom of the hole. The height of the layer should be such as to cover the inner protrusions of the tire by 5-10 cm.
5. Waterproofing fabric is placed in the container. It is evenly distributed throughout the internal volume of the rubber container. The edges are brought out.
6. The pond is filled with water. It creates a certain pressure on the bottom and walls of the container. Under pressure, the walls expand and the laid film is pressed against them. The body of water takes on its true form.
7. The edges of the waterproofing fabric are inserted into the gap between the wheel and the ground. Sand is placed in this opening. It is wetted with water. After shrinkage it is added new sand, and the process repeats. This creates a reinforcement for the film. Instead of sand, you can use earth or clay.

The finished structure stands firmly on its foundation. A strong fastening protects the pond from shifting when swimming. It's time to decorate it.

If you decide to buy an artificial pond for your dacha, do not rush to spend money! It will cost much less to build a pond at the dacha from a tractor tire. As you know, the wheels of these machines are large, and accordingly the diameter of such a pond will also not be small.

To prevent the wheel from leaking water, you can use PVC film, but it has many disadvantages. It is more reliable to concrete the bottom of our future reservoir. Concrete is not fragile, will not tear and is not afraid of temperature changes.

So, to create artificial pond at the dacha with your own hands you will need:

• 2 shovels (bayonet to dig a hole under the wheel and shovel to remove excess soil);
• building level;
• saw (it’s better to take a grinder with a regular metal circle, but if you don’t have one, a hacksaw will do);
• sand, crushed stones and stones;
• plants for pond decoration.

How to make a pond from a tire?

Introducing step by step guide construction of a pond at the dacha:

• The tire needs to be prepared: cleaned of dirt and dust, removed with a grinder or hacksaw top part(cheek).
• Decide on the location where the pond will be located.
• Determine how deep to deepen the base. Is it possible to place a pond on the surface of a flat area? or dig into the ground for the entire width of the treads.
• Dig a hole according to the shape of the future reservoir, but slightly larger in diameter. Level the bottom and add a sand cushion (at least 15 cm). Compact and place the tire at the bottom of the hole.
• To seal, you can choose one of several options: use a covering material for swimming pools - spread it along the bottom of the hole and extend the edges 0.5 m beyond the laid tire or concrete the bottom of the tire.
• If you used the first option, in order to evenly distribute the film in the tire, you need to add water. To secure the material well, as an option, you can lay stones around the perimeter of the pond.
• Now, before completing the construction of a pond at the dacha, you can place a fountain in it, for which you will need an electric pump or an aquarium turbine with a nozzle. To protect yourself and others from electric shock, the wire should be pulled through a hose and slightly covered with earth.

As an additional decor, you can install lighting from garden lamps on solar powered. So you can create an artificial pond in your dacha with your own hands minimal costs. In addition to an artificial pond, tires can be used to make an excellent water barrel. Read more about how to do this in the following material.

(ArticleToC: enabled=yes)

Most owners suburban areas I would like to have my own artificial pond. The highlight of the landscape - a pond made of tires with your own hands would delight the owners and guests.

After all, it is known that contemplation of the water surface puts you in a lyrical mood, helps you relax and receive a surge of inspiration.

But, as a rule, due to lack of space, many people give up the dream of having a pond - a source of positive emotions and coolness. However, it is possible to make it a reality using ordinary car tires, which served faithfully to car drivers.

To decorative pond ik attracted attention, it is important to choose the right place for it.

To do this, you must follow the basic rules:

• The most suitable place for a do-it-yourself tire pond would be partial shade. If you build it in the sun, the plants will quickly wither and the pond will lose its attractiveness. And the water will begin to bloom. Not best option ventilated places, as well as the construction of a reservoir under the canopy of trees. In the latter case, it will be clogged by constantly falling leaves. Frequent cleaning will be required;
• the pond should be visible from different vantage points. Then trees, clouds, a house, etc. will be reflected in its water;
• It is advisable to place the pond in a depression, since a small body of water looks better when viewed from above.

How to choose a tire

Next, they move on to searching for a tire, the choice of size of which depends on the free space available for construction. If it is catastrophically low, you should choose a tire from a passenger car. If there is enough space to implement a large-scale project, the diameter of the tire can be impressive (more than human height). This could be a tire from KAMAZ or BELAZ, a Belarus tractor, etc.

It is clear that not every garage has one like it. But it’s easy to find a tire of this size by contacting a tire repair shop or visiting car dealerships.

Rubber base closes decorative tiles, so that it is impossible to guess how the reservoir works.

Decorating a pond

Add exoticism artificial reservoirs fish - even aquarium fish are suitable, as they feel quite comfortable in them.

But, there are other ways to decorate artificial ponds made from tires with your own hands: planting along the banks of a reservoir Siberian iris, breeding water lilies, floating pondweed or swamp grass.

You can use low-maintenance artificial jewelry. Artificial ducks and turtles basking on the shore look great on the surface of the pond.

The ponds built nearby completely transform the alpine coaster. An additional effect at night is created by backlights powered by solar panels, surprising with a mysterious soft glow.

Video: How to make a pond with your own hands

Step by step instructions

First of all, you should prepare tools and materials.

You will need a few of them:

• tire of the required size;
• PVC film or other covering material;
• crushed stone;
• sand;
• plants and decoration materials;
• shovels - bayonet and shovel;
• a hacksaw or jigsaw;
• level.

Then, they move on to the second stage - preparing the tire. Although it will have to be buried in the future, it is necessary to clean the tire from dirt and cut off the top part.

Of course, you can use a sharp knife for this. But such pruning will require a lot of time and effort. It is better to do the work with a hacksaw or use electric jigsaw, working with it at low speeds.

Having prepared the tire, they begin to dig a pit, having previously leveled the site. The tire can be buried to any depth. The shape of the hole for the tire must correspond (with allowance) to the diameter of the tire.

Having carefully leveled the bottom (check with a level), it needs to be covered with sand to a depth of 15 centimeters. The sand is thoroughly compacted, after which the rubber blank is lowered. It remains to check the level of the horizontal position of the installed tire.

It's time to move on to the next stage - waterproofing;

For it, it is more advisable to use a covering material designed specifically for reservoirs. It is sold in specialized retail outlets or where they sell gardening supplies.

You need to buy it based on the fact that it should protrude beyond the tire walls by half a meter. In extreme cases, thick polyethylene will do. But it will last much less. Therefore, having given preference to it, you need to take into account that replacement will be required, which is impossible without dismantling the structure. Having distributed the selected material along the bottom of the dug hole, it is taken out beyond the edges of the chamber placed in the hole;

Having carefully straightened the material and pressed the ends with sand, they proceed to decorating. Decorative stone is used for it.

A do-it-yourself tire pond with overflows, made from several tires with varying degrees of depth, looks charming. Based on such overflows, beautiful waterfalls are created. For this purpose, a hose is connected to the upper tire, through which water is supplied under low pressure. It, overflowing the upper container, effectively flows into the container below, water, imitating a waterfall.

Video: Exclusive tire ponds

Every Russian person is famous for his ingenuity. Indeed, what people on our planet can find interesting application those things that are considered trash.

With the development of the automobile industry, old tires should find their use. Therefore, enterprising people decided to make them beautiful flower beds and even attractions for children. In addition, you can make a pool or pond from a waste tire. In this article we will tell our readers how to organize a pond at the dacha with your own hands, step by step, using tires. And besides the description, here you can also see a photo. In general, we think that this material will be useful to you.

What kind of tire is suitable for creating a country pond?

It is worth saying that the choice of tires for a future pond is influenced by the space that you can provide for this structure. If your summer cottage does not have extra space, then your choice is a tire from a passenger car. And if there is a lot, you can choose:

• Kamaz tire,
• Rear wheel of the Belarus tractor,
• A tire from a 45-ton BELAZ.

Note! You can always find old pond tires at a tire shop. You can get them there for free. You can buy them for nominal money at a car dealership or find similar offers on the Internet.

What kind of pond can I make?

Of course, you cannot breed fish in a tire pond. But you can plant various plants in it and along its banks. In order to hide the rubber base, you need to plant flagstone. You can also set up an alpine slide very close by. As a result, your guests will not immediately guess what this water feature was made of.

Note! Even the smallest pond is a danger for small children. Therefore, it is not recommended to leave them unattended in the garden where the pond is located.

What to use to build a pond

In this article we are talking about how to make a tire pond in your country house. Of course, in order to make this structure you need consumables and tools.

Tools:

• Jigsaw or hacksaw;
• Level for construction;
• Bayonet and shovel.

Materials:

• Stones, rubble,
• Sand, soft sealant, as well as ornamental plants.

Create a pond step by step

Well, the moment has come when we will describe step by step how to make a pond with your own hands from a tire. And if you follow our instructions, then you will succeed.

Of course, the tire is first washed off dirt. Then the upper part is cut off from the product. Used in this work: a jigsaw or a hacksaw. A sharp knife will also work.

Then it is worth determining the location of the future reservoir. A sunny area located in the recreation area is suitable for this purpose. The pond should be located away from trees so that it cannot be clogged with fallen leaves.

At the next stage, the degree of penetration of the rubber base is determined. The pond can be located:

• On flat surface land;
• Recessed into the ground by a third;
• Completely buried in the ground.

Now you need to dig a hole. It should match the shape of the tire. In addition, it must be larger than its diameter. The depth is determined based on previous information.

The bottom must be leveled. After which it is covered with sand. In this case, the sand layer should be 15 cm. Then the tire should be laid on the compacted bottom.

PVC film can be a soft sealant. However, it is best to use a special material for swimming pools. It is purchased in special stores. This material is spread freely along the bottom of the pool, and the edges are brought out. In this case, the length of the edges should extend half a meter from the pool.

Now you need to pour water into the pool so that the material can be rationally distributed inside the tire. To fix the material, stones that will have a round shape are suitable. They are laid at the bottom of the structure at opposite ends.

The edges of the film material, which are brought out, are straightened and covered with ordinary sand. The sand will hold them. In the future, they can be decorated with gravel. Wild turf and other materials you like will also work.

The pond, which you managed to revive very simply with the help of a fountain. In this case, you can use a pump small sizes, or a turbine with an aquarium attachment. These devices will operate on electricity. Therefore, the wire can be put into a hose or buried in the ground.

The illumination organized by garden lamps, which will be powered by solar panels, will look beautiful. IN daytime Such a lamp will accumulate energy for a day, and in the evening it will be able to give you soft light.

Note! If you use sand or gravel for the bottom of the pond, the water will become cloudy. To ensure that animals moving through your pond do not die, summer cottage a beautiful snag is placed in the pond, with the help of which they can get out of it.

How to decorate a tire pond. Options

As you can see, making a decorative pond from a tire with your own hands is not difficult or expensive. It is important to follow some rules here. But in order for the pond to truly become a decoration of your garden plot, use some decorative elements.

• So, from two large tires you can make two ponds, which will touch each other. At the time of decoration, at the junction you can install wooden bridge. The bridge can play a decorative role or be part of a garden path.
• On garden plot mogur there are ponds with overflow. To do this, one pond is installed underground, and the other is placed on the surface of the earth. To perform an overflow, you need to drain rainwater from the roof of the house. You can also build a homemade waterfall.
• In order to make a waterfall, you need to install a hose with water pressure out of stone. It should look out through the thickness of the pond decorations. The flow of water will be ensured by overflow between reservoirs. And the water itself will fall from the height of the stones.
• Using a large tire you can make a swimming pool for children. In this case, the tire will be well strengthened, and the coastal area will be decorated with tiles. This will ensure safe walking barefoot. For such a pool, it is worth purchasing a pump in order to filter the water.

Let's sum it up

So you have learned how to make a decorative pond from a tire. As you can see, this process is not very complicated. It is important to prepare all consumables, as well as the necessary tools.

Many summer residents are thinking about organizing a decorative pond on their site. For such an element landscape design there are a lot of advantages. A pond is a source of not only coolness, but also positive emotions that will be remembered for a long time by both site owners and guests. Contemplation of the water surface relaxes a person and puts him in a lyrical mood. Many people reject the idea of ​​organizing an artificial pond on their property because of its small area. Meanwhile, to make a cozy corner with a pond, it is not at all necessary to have a lot of land. Lately, people have often been decorating their areas with car tires. Beautiful flower beds- not everything that can be built from this available material. Today we will learn how to make a tire pond with our own hands.

Place for a pond

So that a do-it-yourself tire pond will always bring only positive emotions, you need to choose a place for its location carefully.

In this matter, it is worth relying on the following criteria:

1. The pond should not be in the sun all day. Most suitable place for its organization - penumbra. Otherwise, the water will quickly bloom, and the plants decorating the pond will wither.
2. Ventilated places are also not the best option.
3. It is not recommended to place a pond under the canopy of trees, as it will constantly become clogged with leaves and twigs.
4. Since the visual effect is main reason arrangement of a decorative pond, the latter should be clearly visible from all sides.
5. Artificial ponds are often placed in natural depressions, as they are best viewed from above. This placement also prevents the pond from constantly being exposed to direct sunlight.

To finally decide on the choice of location for arranging a decorative pond, it is recommended to take a piece of fabric or polyethylene approximately the size of the intended pond, and, placing it in the chosen location, check how it will look from different points of the site.

Search and selection of tires

Before you start looking for a tire, you should decide on the configuration of the reservoir, or more precisely, its size. If there is a catastrophic lack of free space on the site, then an ordinary tire from a passenger car will be enough for a decorative pond. Well, to implement a larger-scale project, you will need a tire from a truck. There are wheels whose dimensions exceed human height. Using them as the basis for a pond, you can build a whole lake in which you can even swim.

If it is easy to find a tire from a passenger car, then with large wheels it will be more difficult. You can find a suitable copy in tire shops. There are always accumulations of unnecessary rubber that must be disposed of, which you can get hold of completely free of charge. You can also look for used tires from friends who drive a car of the appropriate size, or at car companies. Disposal of unusable tires is a problem all over the world, so it is not difficult to find people willing to get rid of old tires.

Pond design

Before you start arranging a tire pond with your own hands, you should decide which plants will complement it. A win-win option is to use Siberian iris, water lilies, swamp grass and floating pondweed. Plants planted around a pond will transform and complement it. Alpine slides are often planted around mini-ponds, which not only look great, but also solve the issue of creating shade. If the owners do not have the time and desire to care for the plantings, then they can resort to the use of artificial flowers, such as lilies. You can put artificial ducks on the water, and turtles around the pond.

For an additional effect, you can illuminate the pond using solar-powered lamps. They use up the energy accumulated during the day at night in the form of a soft glow.

When setting up a tire pond at your dacha with your own hands, you must remember that you should not cover it too much with plants and decorations, since main element decorative pond - water. When thinking about the configuration of a pond, you must also take into account that it can become a source of danger for children.

It's time to learn how to make a tire pond with your own hands. Step by step instructions will help us with this.

Preparation of tools and materials

When starting to build a tire pond with your own hands, first of all you need to prepare tools and materials. This will allow you not to be distracted while working.

To organize a decorative pond you need the following tool:

1. Bayonet and shovel shovels.
2. Metal hacksaw or electric jigsaw.

You will need a little more materials:

1. Tire.
2. PVC film or covering material for swimming pools, which can be purchased at specialized retail outlets.
3. Sand.
4. Crushed stone.
5. Stones for decorating the banks.
6. Plants for decorating and framing a pond.

The last two points are variable.

Tire preparation

Even though the tire will be placed in the ground, it is recommended to clean it of dirt. This will make working with her much more pleasant. Then you need to cut off the sidewall of the tire on one side. Subsequently, this side will be the top. Pruning, in fact, can be done by anyone cutting tool. However, an electric jigsaw is best suited for these purposes. Using a hacksaw for metal will require much more time and effort, and a knife - even more so.

Digging a hole

Before you start digging a hole, you should decide on the depth to which the rubber base of the pond will be immersed. The tire can be buried completely or partially in the soil. Sometimes it is even left on the surface of the earth. It all depends on what is expected decorative design reservoir If you decide to deepen the tire completely, it is recommended to leave a couple of centimeters of the rubber edge above the ground. It will prevent rainwater from flooding the reservoir. Based on decision taken, a round hole is being dug. It should match the diameter of the tire, but with a small allowance.

Before lowering the tire into the resulting depression, its bottom must be filled with sand to a depth of 10-15 cm (they should be taken into account when calculating the depth). The sand should be soft, without coarse impurities. It is needed in order to avoid damage to the gasket placed on the bottom of the pond and, as a result, water leakage. The sand needs to be compacted well, preferably level. Now you can lower the tire directly into the hole. It also needs to be leveled so that a do-it-yourself tire pond on the site looks as aesthetically pleasing as possible.

Installation of waterproofing

The most labor-intensive stage of organizing a tire pond with your own hands is already over. It's time to install waterproofing into the tire. For these purposes, the best material is a special material that is intended to protect swimming pools and is sold in special retail outlets. It can also be found in large garden supply stores. The amount of waterproofing material must be calculated so that it protrudes beyond the tire walls by at least half a meter.

Why is it not recommended to use plain polyethylene? Indeed, the use of polyethylene is more suitable for homemade products, which are created from improvised materials. However, it is still recommended not to use it. The fact is that even the most durable polyethylene will one day not withstand the load and leak. In this case, you will have to change the bottom of the reservoir, which is a rather labor-intensive procedure, especially if the pond is additionally decorated with plants. Those who nevertheless decide to use polyethylene are recommended to make the top of the reservoir collapsible, so that in the event of a leak, the process of replacing the waterproofing is not so difficult.

The covering material must be distributed along the bottom, and its edges must be wrapped over the ribs of the tire. Before securing the edges, you need to pour water into the pond and make sure that from the space between the waterproofing and inside all the air came out of the tires. Under water pressure, the covering material should be distributed throughout the pit as much as possible. So that the bottom is level, and on a sunny day through clear water there were no visible folds on it; you could press it down with stones placed along the edges. It is important that these stones do not have sharp sides. The outward-turned edges of the waterproofing material must be sprinkled with crushed stone and sand in order to finally secure them.

Decorating a pond

So we figured out how to make a tire pond with our own hands. Further decoration and strengthening of the reservoir will depend on its purpose and the personal wishes of the owner. On initial stage you can simply line the mini-pond with stones.

If the owner of the site used a large tire, then the pond may well be suitable for swimming for all family members. In this case, the banks of the structure should not be overloaded with stones. It will be enough to simply arrange an area around the walls of the tire. It is important that the stones are not sharp. The shore area of ​​the pond for children's swimming can also be covered with tiles so that children can step on it with bare feet without fear. In addition, when using a pond for swimming, it is not advisable to place anything on its bottom to spread out the waterproofing material. You also need to take care of water filtration or at least changing it frequently. Those who have children should approach the issue of bathing safety especially carefully.

If the pond is used purely for decorative purposes, then to create a beautiful image, you can arrange the stones in any way you like. Sharp stones look very attractive in the design of a DIY tire pond. The photo below confirms this.

Stones can be laid out either in one row or in several, placing large boulders below and small pebbles on top. The bottom of a decorative pond can be decorated with pebbles taken from the river or brought from the sea. It is not recommended to use gravel and sand to decorate the bottom, as they make the water cloudy. One way or another, it is not recommended to overload the pond with decorative elements, because it is attractive in itself. As you can see, creating a tire pond design with your own hands is as easy as making the pond itself.

Regardless of the will of the owners, various small animals (moles, hedgehogs, mice) can live in the garden. To prevent them from dying when they get into the pond, you can place a snag in it. It will not only help animals get out of the water, but will also serve as an excellent decorative element.

Now you know how to make a tire pond with your own hands. Step by step guide this ends here, all that remains is to get acquainted with some interesting ideas by design.

Pond design ideas

In addition to a simple mini-pond, you can also make more sophisticated water compositions from tires with your own hands. If you take not one tire, but two, identical or different sizes, then you can build two reservoirs at once, which will touch each other with a protector. In itself, a design of this type looks simple, but with proper design it becomes very impressive. For example, at the point where the rubber bases touch, you can build a bridge. It can be either a purely decorative element or part of a garden path.

You can make overflow ponds from several tires. To do this, the tires need to be buried at different depths, so that when the top one is filled, water flows into the bottom one. By the way, with the help of such an overflow you can organize a nice drainage of rainwater collecting on the roof. You can build a homemade waterfall based on overflow ponds. To do this, you need to connect a hose to the upper container, which will supply water. It can be carefully hidden using stones located along the banks. If the site has a slope, then overflow ponds will fit into it even better.

You can also revive a DIY decorative tire pond by using a fountain in it. To do this, you can use a turbine with an aquarium nozzle and a small pump. In order for the fountain to work, electricity must be supplied to it. The wires must be carefully insulated using corrugated pipes. It is advisable to bury them underground so that they do not spoil appearance pond and did not become an object of curiosity for children.

Conclusion

Today we figured out how to make a tire pond with your own hands. Step by step instructions, discussed above, will allow you not to miss anything and create the most attractive pond. Finally, it is worth noting that car tires are really universal material, which can be successfully used in arranging your personal plot. A pond made of tires can not only decorate a site, but also replace a swimming pool. Water is an integral part of our lives, so its use in arranging recreation areas will be a very good solution.