What is the difference between an ottoman and a bed? It is used for sleeping, as a bed or as a sofa. A self-made ottoman can perform any function, the main thing is that it fully satisfies the owner’s wishes and fits perfectly into the interior. The difference between an ottoman and a bed is that the design is complemented by a persistent backrest located at the head, along the length or angle.

When making an ottoman with your own hands, the main emphasis is on modeling the frame. Drawings are used to perform the work correctly. To acquire the necessary skills for making this type of furniture with your own hands, it is recommended to try to assemble an experimental version for use, for example, making a blank from a bed in the country. By gaining experience, it becomes possible to make a beautiful and convenient design worthy of the highest praise.

In order to make a durable ottoman bed with your own hands, you need special attention pay attention to the choice of materials and accessories. For example, wooden legs will give it a classic and presentable look, while chrome-plated metal legs will give the structure a modern effect.

Preparatory stages

How to make an ottoman? Making an ottoman consists of three main stages:

1. Frame production;
2. Volume filling with foam rubber;
3. Furniture upholstery.

Before starting production, you need to stock up on everything necessary accessories. To combine the interior and dimensions of the ottoman, a diagram is drawn up. Dimensions directly depend on the size of the purchased mattress, because with my own hands It is simply impossible to make a high-quality mattress. List of materials:

• boards, bars, plywood;
• foam;
• padding polyester;
• textile;
• buttons for decoration.

You can make legs for this type of furniture yourself, or you can buy them at specialized stores. There are various stores that supply accessories from domestic and foreign manufacturers. But the choice of fabric for upholstery needs to be taken very seriously. After all, the color and quality of the fabric determine how harmoniously the ottoman will complement the interior of the apartment. The selected fabric should be easy to clean and not deform under mechanical stress.

Build process

After purchasing the materials used, you can make an ottoman with your own hands. First, they begin to form the base of the product. First, the side parts of the frame are fastened together using confirmations, screws or self-tapping screws. The frame walls must fit snugly to the side parts; for this, cross tie bars are attached to the end of the frame. Joints wooden structures To make a strong structure, they are lubricated with glue. After assembling the frame, it is carefully inspected and checked for strength and correctness of shape.

The next step is to develop the internal structure of the ottoman. To do this, holes are drilled in the longitudinal boards for self-tapping screws, which are placed at a distance of 25 centimeters from each other. These holes serve to secure the stiffening ribs on which the chipboard sheet or fiberboard. The stiffening ribs must be tightly fixed, the strength of the created structure depends on this. A foam layer is lined on top of the plywood. The choice of foam rubber must be approached with all responsibility, since soft foam is pressed under the weight of a person, and too dense is not comfortable for relaxation. Experts recommend using foam rubber with a thickness of more than 30 millimeters.

After lining the foam rubber, they begin to upholstery. To ensure a tight fit of the fabric to the structure, a construction stapler is used. Most often, durable flock or chenille is used for upholstery. When stretching the fabric, it is important to maintain the degree of tension. Upholstering the frame is not difficult, but when stretching the fabric over the back of the ottoman, problems may arise, since the shape of the back may be different.

The process of nailing fabric is considered a labor-intensive process as it requires precision and diligence. If for a number of reasons the upholstery is unsuccessful, then you can take the easy route and purchase a new cover made of good quality material.

In general, the procedure for making an ottoman with your own hands is very exciting, since you can be a master and author of the product. To do this, you will have to collect the necessary information yourself. In addition to the unusual backrest configuration, you can make additional drawers. Sometimes they make additional tightening of the foam rubber in order to increase the volume of the product. With every effort, your ottoman will be no different from a professionally made design.

Pros of an ottoman

Many people think the ottoman is not very good useful furniture, however, having become familiar with the main ways of using it, the opinion changes. Advantages:

• Various modifications of the designs of this type of furniture are interior decoration (bed, couch, sofa);
• A handmade ottoman meets all environmental requirements;
• DIY furniture is a good option in terms of price;
• This type of furniture is a godsend for small apartments, as it saves space.

Today, the ottoman is returning to popularity and is successfully installed in our apartments. Making this type of furniture in this way is equivalent to making a bed with your own hands.

A wooden couch made by yourself will interest anyone creative person. The couch looks appropriate in any room, including a gazebo. Currently, there are several simple master classes that do not require carpentry skills. Anyone who is familiar with working with tools and knows how to handle wood can make such a piece of furniture.

Required tools and materials

It is easiest to make a couch from wood, since forged products require the ability to work with complex tools.

To make the product you will need the following materials:

• pine boards
• nails
• glue and screws

The tools you need to have on hand are:

• drill
• screwdrivers
• woodworking machine.

It is very important before starting work to obtain a clear drawing that will take into account the dimensions of the room (and on which all the details will be marked). This is necessary in order not to doubt the accuracy of the work performed. It is also worth noting that this will significantly reduce production time. The dimensions of the future couch should take into account the size of standard mattresses. IN furniture showrooms You can find a mattress to suit every taste, but all such products have certain sizes. The mattress must fit on a specific sleeping area.

Design Features

Folding couch- This ideal option, which provides for the possibility of transportation. Use coniferous boards for this - best option because they have high quality and at a low price. An ordinary couch is distinguished by the simplicity of its elements and fastenings, which allows even an inexperienced person to make it. The peculiarity of this type of furniture is that the upper slats of the back and sides are inclined. This increases comfort.

Step by step instructions

• Before starting work, you need to prepare all the tools and materials that you will need to create quality furniture. Coniferous boards must be smooth and smooth surface and have the same size. All tools must be in good working order, and the cutting parts must first be sharpened.
• The production of parts begins with the side parts. The slats have spikes at their ends, so there must be special grooves in the center of the boards. Wooden spacers should have a length equal to the distance between the slats. Their thickness corresponds to the width of the groove, and their height corresponds to the depth of the groove. Before joining the parts, they need to be treated with glue.

• The parts must be of such dimensions that they will allow other components to fit in with some effort. Having assembled the sidewalls, they need to be pressed. After this, you should let them dry thoroughly.
• All four blanks are made according to the same principle. They dry for several hours. The joints of the boards should be located in the same plane.
• To make the legs, a template is used, according to which the necessary parts are cut out. The cut needs to be sanded and the edges slightly rounded. You can check the correctness of the cut legs by connecting them together and fitting them to one measurement.

• The back is made in the same way as the rest of the structure. However, it is important to remember that the upper parts are attached under small angle, and the bottom slats should have a slope right angle. Having assembled all the parts of the structure and made sure that they are of high quality, you need to start attaching the metal elements. They are needed so that the product can be folded and unfolded.
• Typically, the couch is subject to heavy loads, so the places where the screws are attached need to be further strengthened. To do this, glue is poured into the holes and wooden dowels are inserted. After this, screw in the screws. This method of strengthening the structure guarantees a long “life” of the product.

Lamels

Making lamellas is a simple process. Their thickness should be approximately 30 cm, the length always corresponds to the width of the couch, and the width can be of any size. Between the slats there should be distance 30-40 mm, otherwise the load on individual parts will vary. The slats must be secured at the ends to the bars. The bars are attached to the planks using self-tapping screws.

Having finished collecting the parts, they need to be processed. Clear varnish is often used for this purpose, but stain or paint can also be used. The final processing decision is made by the master himself. He can simply varnish the entire structure, or he can create unique design using paint.

When planning to carry out finishing processing, you need to sand the uneven surfaces and wipe them with a napkin. Coloring agents must be of high quality so that the lint does not rise under their influence. After all, this will mean that re-grinding is required.

A homemade couch is a multifunctional piece of furniture. The couch is small sofa, intended for one person. Outwardly, it looks more like a bench or a single bed, which does not have a full back. In any case, you can easily take a lying position on it or sit with your legs extended.

The couch is a unique piece of furniture. It can be used as a sofa or armchair. Many people use it as a bench in the hallway to make it convenient to put on or take off shoes. If ottomans are usually used in a small hallway, then in a large room you can find a place for a stylish couch. The product looks good in the bedroom. It can be used as a storage place for bedspreads and pillows, or can be a place for massage sessions. On such a bench it is very convenient to spend time reading an interesting book.

A couch by the window instead of a window sill will look original. This option is perfect for a room with a large window sill that can be comfortably furnished.

You can make this piece of furniture from an old sofa, which will not require much effort and time. You can place the couch on a large enough balcony or veranda to enjoy spending time on fresh air V warm time year.

Doctors - often smart people. Sometimes, however, they interfere with our bodies with completely unfounded claims, but this can be forgiven, given their other achievements. In my experienced opinion, one of the breakthroughs in medicine was the conclusion that people with bad backs are better off resting or sleeping on a hard surface. The medical couch is ideal in this regard, if not for the disgusting calico upholstery. But a couch made with our own hands is devoid of such shortcomings, because we decide everything ourselves.

Let's see how to make such a couch yourself

The design of a regular couch

There are only three main signs of a simple, decent, unrefined couch:

• Simplicity and reliability of the design.
• Smooth horizontal bed with minimal softening padding.
• Adjustable headboard lift.

Based on the above, we will copy the medical couch from available materials, choosing the upholstery yourself.

Materials and accessories for the couch

As an alternative to the metal base of a standard couch, let’s take durable and easy-to-process wooden components:

• Europlywood 20 millimeters thick. Standard Sheet 2100x1200 mm is enough for us.
• Beech block with a section of 60x60 mm. Sold in lengths of 2000-2100 mm, so one is enough.

For upholstery we use 20 mm thick foam rubber and tapestry (or chenille). The wood will have to be painted or stained and certainly varnished, so immediately decide on the color of the structure. Even such a purely practical thing should look decent.

The most difficult thing is to decide on the lifting mechanism. An option with stepped fixation, the diagram of which can be seen in the following figure, is perfect. It’s almost impossible to buy it online – you’ll have to look for it in hardware stores. These were used on old-style clamshells, so you might get lucky.

Scheme of the lifting mechanism with step fixation

Under no circumstances should you use a mechanism for an ottoman or sofa. Even with one spring, it creates such a force that you will have to lower the relatively small headboard together - the lever is too small.

The mechanism is not suitable for an ottoman or sofa!

For a two-position (upper or lower position, middle position is not given) gas microlifts are suitable - shock absorbers with a force of no more than 80, but not less than 40N (ask the seller) and a length of no more than 400 mm.

With other accessories everything is simple:

• Confirmats 5x70 mm.
• Self-tapping screws 4x16 mm.
• Self-tapping screws 4x60 mm.
• Metal corners 30x30 mm.
• W-shaped butterfly loops. Ask the seller (seen in the diagram above).
• Staples for 12 mm stapler.
• PVA glue emulsion.

Required Tools

Here we find out how to make a couch with your own hands, but everyone understands that you can only make a plasticine model with your bare hands. That's why:

• Electric jigsaw with wood saws.
• Drill – screwdriver with a set of bits and drills.
• Stapler.
• Tape measure, pencil.
• Right angle.
• Sandpaper or sander.
• Brushes for paint and varnish.

Product detailing

The couch is higher than a regular chair or sofa specifically so that people with bad backs do not have to get up from it. Therefore, we cut the block into 500 mm pieces - these will be the legs of the structure.

We cut plywood:

• 1700x700 – bed.
• 380x700 – headboard.
• 2000x170 – 2 pcs. Long kings.
• 560x170 – 4 pcs. Short kings.

Preparing to assemble the couch

The main preparation consists of carefully processing the parts. All wooden surfaces(except for those that we will cover) should be thoroughly sanded, stained (if necessary) and varnished.

A little trick: After the first layer of varnish, go through the sandpaper again. The raised wooden “hairs” under the varnish will harden, and you can easily get rid of them.

The foam rubber should be cut with a margin: we bend it under the bottom of the parts to protect the upholstery material from premature abrasion. The corners are soft and the fabric does not rub against the plywood. If you are new to upholstery, I will give you a couple of tips:

• First, shoot the tapestry in a “quiet state,” that is, unstretched, to any long side details. Then you begin to pull and shoot from the middle of the opposite side to the edges. Repeat the same procedure along the short ends: From the middle to the edges.
• On the corners with inside cut off the “excess” material diagonally, simply placing the resulting fold perpendicular to the plane of the part.

Assembling the couch

In our case, the short drawers are attached between the long ones, so we drill them into the end for the confirmations (diameter 5 mm). In the long ones we mark and also drill for confirmations, but in a plane (diameter 8 mm). We place one short drawer at a distance of 400 mm from the part of the box where the headboard will be.

The following figure shows exactly how to attach the legs. To do this, we purchased 4x60 self-tapping screws, for which we drill in the drawers with a diameter of 5 mm, and in the legs - 2.5 mm (so that the wood does not crack).

Attaching the couch legs

Along the entire perimeter of the box (except for the head compartment), we screw the corners to secure the main bed. In the version with gas shock absorbers, we install them too, according to the instructions included in the kit.

We screw the stock to the corners on the box, retreating 50 mm from the foot and on the sides. It is more convenient to first attach butterfly loops to the headboard, and then, in a lowered, horizontal state, “slide” them under the bed and secure them completely. We fasten the counter part of the gas lifts - our couch is ready!

We have already looked at the question “how to make a couch yourself?”, but I would like to draw your attention to the universal principle used in this design: you can assemble any furniture in exactly the same way.

Make the legs shorter and the drawers wider - get a single bed. Attach the appropriate mechanism to the box and it will turn into a wardrobe bed. There is always time to think and do a specific thing that is right for you - if your head and hands are in place and in working order.

Eyelash extensions require a lot of time, so professional technicians offer clients to sit comfortably on a special couch.

Manufacturers are constantly expanding the range of couches, increasing their functionality.

The equipment is divided into several types:

Advantages and disadvantages of a folding couch

A couch for eyelash extensions, especially its folding version, is necessary attribute a master visiting a client’s home. The presence of equipment will help the leshmaker earn trust and a good reputation among those who use his services or can recommend him to others.

Advantages folding couch the following:

The disadvantages of a folding couch may be the absence of a built-in headrest or orthopedic pillow, so this part must be purchased separately. More often than not, such a lounger is a simplified model without hydraulics, without electric drive, so adjusting the height and angle of inclination takes a certain amount of time.

Pros and cons of non-folding couches

Non-folding couches are used in beauty salons as stationary equipment, so it becomes possible to choose more fundamental models, with additional equipment and increased comfort.

Depending on purchasing potential beauty salon non-folding sun loungers can be equipped with:

They give status to a beauty salon.

With all the obvious positive qualities, awkward models also have several disadvantages:

• they cannot be used on the road, therefore, if the leshmaker also serves clients at home, then it is necessary to have an additional folding option;
• couches with hydraulics, and especially with electric drive, take up a lot of space, so they may not be suitable for small rooms;
• require more care;
• prices for some modern models may not be affordable for new beauty salons.

Selection criteria

A couch for eyelash extensions is a purchase for more than one year. Depends on her physical condition the master and his client, a positive atmosphere during the procedures.

When purchasing this attribute, many criteria must be taken into account:

Dimensions of couches

The dimensions of the couches depend on their functionality, the method of adjusting the position of the sections (hydraulics, electrical, mechanical), design and construction. But there are generally accepted, basic sizes that are considered classic. In this case, the length of the couch is 1.8 m, the width is about 60 cm, and the height is adjustable from 65 to 75 cm. There are Chinese models that can be higher - up to 85-90 cm.

Models with electric drives most often do not fit into these dimensions, as they are considered one of the most bulky. Other parameters of these devices are possible if they are made to order or made by yourself, since they are focused purely on the individual needs of the master.

Choice of coverage

One of important nuances when choosing a couch, it is a properly selected covering on which the client can feel comfortable and relaxed.

It should be:

• tactilely pleasant;
• soft;
• durable;
• can be treated with antiseptics without any problems.

It is better if the couch is covered with leather without unpleasant odor(more expensive option), or leatherette good quality(such material will cost 30-50% less) so that cracks do not appear. Cloth coverings are not suitable - they quickly become dirty, shiny and do not allow for high-quality sanitary treatment.

Modern technologies They offer a product for upholstering couches such as eco-leather. Such a coating does not allow exposed areas of the body to sweat, does not cause irritation, and is classified as a “breathable” material. A pleasant bonus can be the processing of eco-leather in the “stop-claw” style, when the surface is practically not susceptible to scratches.

Some manufacturers, in order to increase their status and the level of customer comfort, complete the product with a terry or non-woven cape, and also provide their products with quality certificates.

Which one is better to buy?

The choice of couch depends on a number of factors:

• the purpose of the purchase is for home visits, which means a folding model, or for work in a salon, where an awkward attribute is suitable;
• availability of sufficient space for the selected stationary equipment;
• totality beneficial properties: functionality, comfort, quality;
• financial capabilities of a salon or private master;
• the payment ability of the majority of customers, which affects the rate of return on purchase;
• the degree of exactingness of the master himself and his clients, that is, the status of the cosmetic establishment.

For a beginner salon or for a private lash maker, it is cost-effective to purchase a mechanical couch (stationary or mobile), such as budget option, which will quickly pay for itself, but will last a long time.

For mid-range salons, it is possible to purchase hydraulic equipment. It is more convenient to use due to the ability to adjust the position of the couch with a pedal.

VIP salons in large cities can afford to buy an electric drive unit. Depending on the master’s requests, it can be equipped with 1, 2 or 3 electric motors, which allow the client to take the most comfortable position and a heated lounger.

The unit can be transformed from a couch into an armchair and has a number of additional gadgets. This is not only increased comfort, but also a serious claim to success.

Models with the same functionality may cost differently, depending on the manufacturer. The most expensive, but also high-quality, are considered to be couches made in Europe. Equipment manufactured at enterprises in Russia and the CIS countries is somewhat cheaper.

Those who want to save even more turn to the offers of Alibaba, AliExpress and other online stores and manufacturers in China; a successful replica of a European certified product can be obtained for very little money.

Best manufacturers and prices

The price range for couches given below in rubles is very arbitrary.

The final cost depends primarily on the current exchange rate of the dollar, euro or national currency.

Manufacturer	Mechanical*	Hydraulic	Electric drives**
China (such as Chaohui)	7500 — 9000	22000 — 28000	from 45000
Russia (such as RuComfort)	9500 — 13000	25000 — 30000	from 48000
Europe (such as Restpro, US Medica)	23500 — 42000	36000 — 42000	from 50000

* prices are indicated only for stationary couches, folding couches are on average 20-25% cheaper;

** the lower price level is indicated, since the upper one depends on the number of electric drives (from 1 to 3), additional gadgets, the presence/absence of heating and has a very wide spread.

Is it possible to make a couch with your own hands?

If the leshmaker is a beginner and does not have the financial ability to purchase factory equipment, then it is possible to make a couch with your own hands. The simplest thing is to adapt a folding office chair, massage table, sofa without backrest, retrofitting them and yours workplace orthopedic pillow, a cape, a hard mattress, a chair with lifting and folding elements for the convenience of the master.

The second way is, having decided on the parameters of the couch, prepare a drawing (or select a ready-made version on the Internet), think about what materials will be used, and choose the most optimal option according to the criteria functionality-quality-price.

Beauty salons who are lovers of exclusivity are encouraged to consider contacting furniture workshop with a request to make a cosmetic couch to match the interior of the room itself, providing suggestions on the design of the lounger. Such an attribute will cost the customer approximately 30,000 - 40,000 rubles, but it will be able to increase the prestige of the establishment.

Materials for creating a couch

An eyelash extension couch consists of several main parts: a frame, a bed base, an inner and outer covering.

To make the entire structure you will need:

Step-by-step process of making a couch with photos

The eyelash extension couch, which has 2 sections, is assembled as follows:

Professional advice on choosing: what you need to consider when buying a couch

For successful eyelash extensions, it is necessary that the couch and the artist’s workplace be comfortable and practical.

High-quality equipment gives visitors to beauty salons a feeling of satisfaction, trust and confidence in the experience of the master. A good lash maker is not only one who strives to do quality work, but also who thinks about the comfort of clients.

The main indicator in this may be the presence of a well-thought-out couch, where 2-3 hours of eyelash extensions will turn for women from an unpleasant procedure into relaxation after working day or household chores.

Article format: Mila Friedan

Video about couches for eyelash extensions

Workbench for craftsmen:

Simple DIY Rustic Daybed

This furniture will interest the owners country cottages and dachas. The couch is one of those furniture models that are appropriate for use in gazebos, open verandas and other places intended for outdoor recreation. We tried to simplify the carpentry work as much as possible, which made the manufacture of the product accessible even for those who are not entirely experienced craftsmen. To complete the work you will need pine boards, varnish and fastening hardware. For tools, you need a set of hand-held electric tools or a universal household woodworking machine. We provide a complete set of drawings; we believe that it is more convenient for you to use them than to change dimensions. Firstly, this way you guarantee that mistakes will not be made. Secondly, the manufacturing time of the couch will be significantly reduced. And thirdly, during sizing calculations, all recommendations of furniture standards and GOSTs were taken into account.

The linear dimensions of the couch fit standard mattresses, you can put “old-fashioned spring” and “new-fashioned” foam on it. By the way, the most “advanced” mattress manufacturing companies began to produce spring mattresses and called it “innovative” technology. At the same time, they forgot that our grandfathers and great-grandfathers slept on this “innovative” technology. The main invisible “innovation” is the increase in the number of springs, but the more noticeable “innovation” is that the price has increased tenfold. Okay, let's leave the mattresses alone and move on to making a couch, this is a more interesting topic.

Brief description of the design

The couch is made collapsible/dismountable; this option was chosen specifically so that it could be more easily transported from place to place. The material of manufacture is coniferous boards; in terms of price and quality, absolutely most consumers are satisfied. All carpentry connections and elements are as simple as possible, which allows even less experienced craftsmen to make the product. Another feature is that the upper slats of the back and sides are not installed at a right angle, but with an inclination. This technique significantly increases comfort; sharp edges do not rest on the back.

Preparing for work

Before manufacturing individual parts, you need to prepare the necessary lumber, the surfaces must be smooth, the wood should not have noticeable flaws, try to choose sections of the boards with a minimum number of knots. Check the serviceability of the tools, sharpen the cutting elements - this approach will not only improve the quality of processing, but will also save quite a lot of time. Why? You will have to do much less grinding and final fitting of parts.

Manufacturing of parts

We recommend starting with the sides. Pay attention to how the slats are attached to the boards. The lamellas themselves have a spike at the ends, but the grooves for them are not made separately, but for all of them together. Mill a groove along the entire length of the board with dimensions for a tenon; the groove should be centered and level. Next, wooden spacers should be made, the length of the spacers should be equal to the distance between the lamellas, the thickness should correspond to the width of the through groove, and the height should be equal to the depth of the groove. How to assemble the structure is shown in the figure; pre-lubricate all parts with transparent wood glue. And one more thing important condition- select the dimensions of individual parts so that the mating elements fit in with little effort. Once the sides are assembled, clamp them together and leave them to dry completely, which will take at least 24 hours.

In this way, make four blanks, glue them together for at least 24 hours, making sure that the joints of the individual boards are in the same plane during manufacturing. To do this, try to install a lot of clamps in places where flatness may be disrupted. The last stage of making legs - using a template, draw the exact outline of the legs on the blanks and electric jigsaw cut them out. Sand the cut thoroughly; the edges can be slightly rounded by hand using sandpaper. To check the accuracy of manufacturing the legs (and this is very important factor) connect them all together with clamps and adjust them along one contour.

Use the same algorithm to make the back. Do not forget that the upper parts must be fastened with a slope, and the lower slats must be at an angle of 90°. When all the individual elements are assembled, proceed to install the metal clips, they are used to create a collapsible/dismountable mechanism. Due to the fact that the couch can have quite large lateral loads, it is worth strengthening the places where the clips are fixed. We offer a very simple, but very reliable option strengthening, trust our experience - the connection will be as reliable as possible. How to achieve this effect? Mark where the screws for attaching the clips will be screwed in. Drill into the planks in these places through holes with a diameter of at least two centimeters, insert wooden dowels into the glue holes. The dowels should be made of oak or any other durable wood, the landing sites should be sanded again and, if necessary, puttied. Self-tapping screws in oak will hold very firmly, there will be no wobbling during the entire period of operation, this has been verified by experience.

Making slats for a mattress

These are the simplest parts, make them at least 25 millimeters thick, the length should correspond to the width of the couch, the width is arbitrary. The distance between the lamellas should not exceed 3÷4 centimeters, otherwise the load on one part may exceed the permissible one. The ends of the lamellas should lie on the bars, the dimensions of the bars are ≈30×30 millimeters. Attach the bars to wooden planks self-tapping screws, select the length of the screws taking into account the total thickness of the two parts being connected. It is advisable to fix the lamellas on the bar using any in an accessible way. We recommend nailing small strips to it at a calculated distance from each other. The distance should be slightly greater than the width of the lamellas.

Final finishing

There are three options finishing- coat with clear varnish, treat with alcohol stain or paint with opaque paints. All options, in our opinion, are completely equivalent. Make an individual choice for yourself, taking into account the style of the furniture already in the room. Before application finishing coatings Thoroughly sand all surfaces and clean them from dust. Do not buy cheap varnishes or paints, some of them have the “harmful” ability to raise pile. This defect can then be corrected in only one way - re-grinding. And who wants to do the same job twice through no fault of their own? We don’t know about you, but we don’t enjoy the first sanding at all.

RUB 1,700

250 rub.

330 rub.

RUB 1,600

1,200 rub.

800 rub

RUB 3,500

RUB 2,300

170 rub.

260 rub.

RUB 2,800

225 rub.

We recommend reading

• Vedas and myths about the origin of man
• Why see a pond in a dream
• Which yeast is better to use for mash saf-moment or saf-levure
• What are "terrestrial planets"?